Internal-state-variable based self-consistent constitutive modeling for hot working of two-phase titanium alloys coupling microstructure evolution

International Journal of Plasticity

Volumn 27, Issue 11, 2011, Pages 1833-1852

  Fan, X G ^a   Yang, H ^a  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

Analytic functions; Constitutive behavior; Microstructures; Thermomechanical processes; Two phase titanium alloys

Indexed keywords

ANALYTIC FUNCTIONS; APPARENT ACTIVATION ENERGY; BOUNDARY MIGRATION; CONSTITUENT PHASE; CONSTITUENT PHASIS; CONSTITUTIVE BEHAVIORS; CONSTITUTIVE MODELING; DISLOCATION INTERACTION; DRAG FORCES; HALL-PETCH EFFECTS; INTERNAL STATE VARIABLES; MICROSTRUCTURE EVOLUTIONS; PARTICLE STIMULATED NUCLEATION; RECRYSTALLIZATION KINETICS; RECRYSTALLIZED GRAINS; RECYSTALLIZATION; SECOND PHASE; SOLUTION STRENGTHENING; STRAIN RATE SENSITIVITY; STRESS AND STRAIN; THERMOMECHANICAL PROCESS; TI-6AL-4V ALLOY; TWO-PHASE REGION; TWO-PHASE TITANIUM ALLOY; VISCO-PLASTIC SELF-CONSISTENT; ZENER-HOLLOMON PARAMETER;

ACTIVATION ENERGY; ALLOYING ELEMENTS; CONSTITUTIVE EQUATIONS; DRAG; DYNAMIC RECRYSTALLIZATION; HOT WORKING; MICROSTRUCTURE; PLASTIC FLOW; STRAIN RATE; SUPERALLOYS; TITANIUM; VANADIUM;

TITANIUM ALLOYS;

EID: 80052022906     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2011.05.008     Document Type: Article

References (83)

1. A. Andrade-Campos On the determination of material parameters for internal variable thermo elastic-viscoplastic constitutive models Int. J. Plasticity 23 2007 1349 1379 (Pubitemid 46660458)
2. R.A. Austin, and D.L. McDowell A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates Int. J. Plasticity 27 2011 1 24
3. M. Berveiller, and A. Zaoui A simplified self-consistent scheme for the plasticity of two-phase metals Res. Mech. Lett. 1 1981 119
4. I.J. Beyerlein, and C.N. Tome' A dislocation-based constitutive law for pure Zr including temperature effects Int. J. Plasticity 24 2008 867 895 (Pubitemid 351227453)
5. T.R. Bieler, and S.L. Semiatin The origins of heterogeneous deformation during primary hot working of Ti-6Al-4V Int. J. Plasticity 18 2002 1165 1189 (Pubitemid 34660596)
6. R.R. Boyer An overview on the use of titanium in the aerospace industry Mater. Sci. Eng. A 213 1996 103 114 (Pubitemid 126394525)
7. F. Bridier Crystal plasticity modeling of slip activity in Ti-6Al-4V under high cycle fatigue loading Int. J. Plasticity 25 2009 1066 1082
8. L. Briottet A mechanical interpretation of the activation energy of high temperature deformation in two phase materials Acta Mater. 44 1996 1665 1672 (Pubitemid 126373031)
9. S.B. Brown An internal variable constitutive model for hot working of metals Int. J. Plasticity 5 1989 95 130
10. E.P. Busso A continuum theory for dynamic recrystallization with microstructure-related length scales Int. J. Plasticity 14 1998 319 353 (Pubitemid 128458126)
11. I.W. Chen, and A.S. Argon Steady state power-law creep in heterogeneous alloys with coarse microstructures Acta Metall. 27 1979 785
12. D.G. Cram Modelling discontinuous dynamic recrystallization using a physically based model for nucleation Acta Mater. 57 2009 5218 5228
13. R. Ding Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing Mater. Sci. Eng. A 327 2002 233 245 (Pubitemid 34271527)
14. R. Ding, and Z.X. Guo Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization Acta Mater. 49 2001 3163 3175 (Pubitemid 32770977)
15. R. Ding, and Z.X. Guo Microstructural evolution of a Ti-6Al-4V alloy during β-phase processing: experimental and simulative investigations Mater. Sci. Eng. A 365 2004 172 179 (Pubitemid 38005826)
16. E.G. Donahue A physically based constitutive model for a V-4Cr-4Ti alloy J. Nucl. Mater. 2000 637 641 (Pubitemid 32028907)
17. Y. Estrin A dislocation-based model for all hardening stages in large strain deformation Acta Mater. 46 1998 5509 5522 (Pubitemid 128410496)
18. X.G. Fan Quantitative analysis of dynamic recrystallization behavior using a grain boundary evolution based kinetic model Mater. Sci. Eng. A 527 2010 5368 5377
19. L. Germain Analysis of sharp microtexture heterogeneities in a bimodal IMI834 billet Acta Mater. 53 2005 3535 3543 (Pubitemid 40822919)
20. Ø. Grong, and H.R. Shercliff Microstructural modelling in metals processing Prog. Mater. Sci. 47 2002 163 282
21. M.E. Gurtin A finite-deformation, gradient theory of single-crystal plasticity with free energy dependent on the accumulation of geometrically necessary dislocations Int. J. Plasticity 26 2010 1073 1096
22. M.F. Horstemeyer, and D.J. Bammann Historical review of internal state variable theory for inelasticity Int. J. Plasticity 26 2010 1310 1334
23. F.J. Humphreys The nucleation of recrystallization at second phase particles in deformed aluminium Acta Metall. 25 1977 1323 1344 (Pubitemid 8576517)
24. F.J. Humphreys, and M. Hatherly Recrystallization and related annealing phenomena second ed. 2004 Pergamon press Oxford
25. Johnson, G.R., Cook, W.H., 1983. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the Seventh International Symposium on Ballistic, The Hague, The Netherlands, 1983, p. 541.
26. A.S. Khan Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures Int. J. Plasticity 23 2007 931 950 (Pubitemid 46366620)
27. U.F. Kocks, and H. Mecking Physics and phenomenology of strain hardening: the FCC case Prog. Mater. Sci. 48 2003 171 273
28. S. Kumar Prediction of flow stress for carbon steels using recurrent self-organizing neural fuzzy networks Expert Syst. Appl. 32 2007 777 788 (Pubitemid 44750612)
29. F.F. Lavrentev The type of dislocation interaction as the factor determining work hardening Mater. Sci. Eng. 46 1980 191 208
30. M.G. Lee A dislocation density-based single crystal constitutive equation Int. J. Plasticity 26 2010 925 938
31. C. Leyens, and M. Peters Titanium and Titanium alloys 2003 Wiley-VCH Weinheim
32. H. Li Modelling mechanical property recovery of a linepipe steel in annealing process Int. J. Plasticity 25 2009 1049 1065
33. M.Q. Li An adaptive constitutive model of the Ti-6.29Al-2.71Mo-1.42Cr alloy in high-temperature deformation J. Mater. Eng. Perform. 15 2006 9 12 (Pubitemid 43294037)
34. X.L. Li, and M.Q. Li A set of microstructure-based constitutive equations in hot forming of a titanium alloy J. Univ. Sci. Technol. B 13 2006 435 441
35. J. Lin Development of dislocation-based unified material model for simulating microstructure evolution in multipass hot rolling Philos. Mag. 85 2005 1967 1987 (Pubitemid 41673062)
36. J. Lin, and J. Yang GA-based multiple objective optimisation for determining viscoplastic constitutive equations for superplastic alloys Int. J. Plasticity 15 1999 1181 1196 (Pubitemid 30509374)
37. J. Luo Constitutive model for high temperature deformation of titanium alloys using internal state variables Mech. Mater. 42 2010 157 165
38. J. Luo The variation of strain rate sensitivity exponent and strain hardening exponent in isothermal compression of Ti-6Al-4V alloy Mater. Design 31 2010 741 748
39. G. Lütjering, and J.C. Williams Titanium second ed. 2007 Springer-Verlag Berlin
40. M.J. Lutton, and C.M. Sellars Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation Acta Metall. 17 1969 1033 1043
41. A. Majorell Mechanical behavior of Ti-6Al-4V at high and moderate temperatures - Part I: Experimental results Mater. Sci. Eng. A 326 2002 297 305 (Pubitemid 34234470)
42. J.R. Mayeur, and D.L. McDowell A three-dimensional crystal plasticity model for duplex Ti-6Al-4V Int. J. Plasticity 23 2007 1467 1485
43. H. Mecking Taylor factors in materials with many deformation modes Scripta Mater. 35 1996 465 471 (Pubitemid 126387655)
44. H. Mecking, and U.F. Kocks Kinetics of flow and strain-hardening Acta Metall. 29 1981 1865 1875
45. A. Molinari A self-consistent approach of the large deformation viscoplasiticity Acta Metall. 35 1987 2983 2994 (Pubitemid 18547483)
46. E. Nes On the mechanisms of work hardening and flow-stress saturation Scripta Mater. 43 2000 55 62
47. H. Oikawa S. Fujishiro, D. Eylon, T. Kishi, Metallurgy and Technology of Practical Titanium Alloys 1994 TMS Warrendale, PA 93 100
48. H. Oikawa High-temperature deformation of polycrystalline beta titanium Scripta Metall. 19 1985 825 828 (Pubitemid 15567230)
49. H. Oikawa F.H. Froes, I. Caplan, Titanium '92: Science and Technology 1993 TMS Warrendale, PA 1779 1786
50. H. Oikawa, and T. Oomori Steady state deformation characteristics of α-Ti-Al solid solutions Mater. Sci. Eng. A 104 1988 125 130
51. N.E. Paton The deformation of a-phase titanium Titanium Science and Technology 1973 Plenum Oxford pp. 1049-1069
52. R.C. Picu, and A. Majorell Mechanical behavior of Ti-6Al-4V at high and moderate temperature - Part II: Constitutive modeling Mater. Sci. Eng. A 326 2002 306 316 (Pubitemid 34231716)
53. J. Preuβner A dislocation density based material model to simulate the anisotropic creep behavior of single-phase and two-phase single crystals Int. J. Plasticity 25 2009 973 994
54. W. Roberts Dynamic recrystallization kinetics Metal Sci. 13 1979 195 205
55. F. Roters Work hardening in heterogeneous alloys - a microstructural approach based on three internal state variables Acta Mater. 48 2000 4181 4189 (Pubitemid 32021701)
56. E.D. Roush Anisotropy of plastic flow and microstructure evolution during hot working of laser-deposited Ti-6Al-4V Scripta Mater. 45 2001 717 724 (Pubitemid 32768137)
57. G. Sachs Plasticity problems in metals Z. Ver. Dent. Ing. 72 1928 734
58. T. Sakai, and J.J. Jonas Overview no.35 dynamic recrystallization: mechanical and microstructural considerations Acta Metall. 1984 1984 189 209 (Pubitemid 14526295)
59. R. Sandström, and R. Lagneborg A model for hot working occurring by recrystallization Acta Metall. 23 1975 387 399
60. C.M. Sellars, and W.J. McTegart On the mechanism of hot deformation Acta Metall. 14 1966 1136 1138
61. S.L. Semiatin, and T.R. Bieler Effect of texture and slip mode on the anisotropy of plastic flow and flow softening during hot working of Ti-6Al-4V Metall. Mater. Trans. A 32 2001 1787 1799 (Pubitemid 32742841)
62. S.L. Semiatin, and T.R. Bieler The effect of alpha platelet thickness on plastic flow during hot working of Ti-6Al-4V with a transformed microstructure Acta Mater. 49 2001 3565 3573 (Pubitemid 32842101)
63. S.L. Semiatin Self-consistent modeling of the flow behavior of wrought alpha/beta titanium alloys under isothermal and nonisothermal hot-working conditions Metall. Mater. Trans. A 33 2002 2719 2727
64. M. Shenoy Microstructure-sensitive modeling of polycrtsralline IN 100 Int. J. Plasticity 24 2008 1694 1730
65. R.G. Stringfellow, and D.M. Parks Self-consistent model of isotropic viscoplastic behavior in multiphase materials Int. J. Plasticity 7 1991 529 547
66. J.H. Sung A plastic constitutive equation incorporating strain, strain-rate, and temperature Int. J. Plasticity 26 2010 1746 1771
67. P.M. Suquet Overall potentials and extremal surfaces of power law or ideally plastic composites J. Mech. Phys. Solids 41 1993 981 1002
68. G.I. Taylor The mechanism of plastic deformation of crystals: part I -theoretical Proc. Roy. Soc. London A 145 1934 362 387
69. G.I. Taylor Plastic strain in metals J. Inst. Metals 62 1938 307 324
70. Y.P. Varshni Temperature dependence of the elastic constants Phys. Rev. Sec. B 2 1970 3952
71. G. Venkataramani Microstructural parameters affecting creep induced load shedding in Ti-6242 by a size dependent crystal plasticity FE model Int. J. Plasticity 24 2008 428 454 (Pubitemid 350251671)
72. P. Vo Flow stress prediction during hot working of near-α titanium alloys Mater. Sci. Eng. A 447 2007 99 110 (Pubitemid 46075933)
73. P. Vo Recrystallization during thermomechanical processing of IMI834 Metall. Mater. Trans. A 39 2008 2965 2980
74. G.Z. Voyiadjis, and A.H. Almasri A physically based constitutive model for fcc metals with applications to dynamic hardness Mech. Mater. 40 2008 549 563
75. P. Wanjara Hot working behavior of near-α alloy IMI834 Mater. Sci. Eng. A 396 2005 50 60 (Pubitemid 40440629)
76. P. Wanjara Influence of thermomechanical processing on microstructural evolution in near-α alloy IMI834 Mater. Sci. Eng. A 416 2006 300 311 (Pubitemid 43108751)
77. J.C. Williams Deformation behavior of HCP Ti-Al alloy single crystals Metall. Mater. Trans. A 33 2002 837 850 (Pubitemid 34406083)
78. C. Zener, and J.H. Hollomon Effect of strain-rate upon the plastic flow of steel J. Appl. Phys. 15 1944 22 27
79. F.J. Zerilli, and R.W. Armstrong Dislocation-mechanics-based constitutive relations for material dynamic calculations J. Appl. Phys. 61 1987 1816 1825
80. M. Zhang Microstructure-based crystal plasticity modeling of cyclic deformation of Ti-6Al-4V Int. J. Plasticity 23 2007 1329 1348
81. M. Zhang Simulation of slip band evolution in duplex Ti-6Al-4V Acta Mater. 58 2010 1087 1096
82. M. Zhou, and M.P. Clode Constitutive equations for modelling flow softening due to dynamic recovery and heat generation during plastic deformation Mech. Mater. 27 1998 63 76 (Pubitemid 128424769)
83. M. Zhou, and F.P.E. Dunne Mechanisms-based constitutive equations for the superplastic behaviour of a titanium alloy J. Strain Anal. Eng. 31 1996 187 196 (Pubitemid 126553629)