Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures

International Journal of Plasticity

Volumn 23, Issue 6, 2007, Pages 931-950

  Khan, Akhtar S ^a   Kazmi, Rehan ^a   Farrokh, Babak ^a  

^a University of Marylandw Baltimore County   (United States)

Author keywords

Anisotropy; Constitutive behavior; High strain rate; Kolsky bar; Multiaxial experiments; Non proportional loadings; Titanium alloys

Indexed keywords

HARDENING; MAGNETIC ANISOTROPY; PLASTIC DEFORMATION; PLASTICITY; STRAIN RATE; TEMPERATURE DISTRIBUTION;

CONSTITUTIVE BEHAVIOR; HIGH STRAIN RATE; KOLSKY BAR; MULTIAXIAL EXPERIMENTS; NON-PROPORTIONAL LOADINGS;

TITANIUM ALLOYS;

EID: 33847666455     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2006.08.006     Document Type: Article

References (42)

1. Abed F.H., and Voyiadjis G.Z. Plastic deformation modeling of AL-6XN stainless steel at low and high strain rates and temperatures using a combination of bcc and fcc mechanisms of metals. Int. J. Plast. 21 8 (2005) 1618-1639
2. Abedrabbo N., Pourboghrat F., and Carlsey J. Forming of aluminum alloy at elevated temperatures - Part 1: material characterization. Int. J. Plast. 22 (2006) 314-341
3. Barlat F., Lege D.J., and Brem J.C. A six-component yield function for anisotropic materials. Int. J. Plast. 7 (1991) 693-712
4. Barlat F., Becker R.C., Hayashida Y., Maeda Y., Yanagawa M., Chung K., Brem J.C., Lege D.J., Matsui K., Murtha S.J., and Hattori S. Yielding description of solution strengthened aluminum alloys. Int. J. Plast. 13 (1997) 385-401
5. Barlat F., Brem J.C., Yoon J.W., Chung K., Dick R.E., Lege D.J., Pourboghrat F., Choi S.-H., and Chu E. Plane stress yield function for aluminum alloy sheet - Part 1: theory. Int. J. Plast. 19 (2003) 1297-1319
6. Barlat F., Aretz H., Yoon J.W., Karabin M.E., Brem J.C., and Dick R.E. Linear transformation-based anisotropic yield functions. Int. J. Plast. 21 (2005) 1009-1039
7. Bell J. Plane stress, plane strain, and pure shear at large finite strain. Int. J. Plast. 4 (1988) 127-148
8. In: Boyer R., Welsch G., and Collings E.W. (Eds). Materials Properties Handbook: Titanium Alloys (1994), ASM International, Materials Park, OH
9. Bridgman P.W. Studies of plastic flow of steel, especially in two-dimensional compression. J. Appl. Phys. 17 (1946) 225
10. Cazacu O., Plunkett B., and Barlat F. Orthotropic yield criterion for hexagonal closed packed metals. Int. J. Plast. 22 (2005) 1171-1194
11. Cazacu O., and Barlat F. A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals. Int. J. Plast. 20 (2004) 2027-2045
12. Chichili D.R., Ramesh K.T., and Hemker K.J. Adibatic shear localization in α-titanium. J. Mech. Phys. Solids 52 8 (2004) 1889-1909
13. De Meester B., Doner M., and Conrad H. Deformation kinetics of the Ti-6Al-4V alloy at low temperatures. Metall. Trans. A 6A (1975) 1975-2065
14. Florenz, M., 1969. Two-Dimensional Plastic Compression of Polycrystalline Aluminum. Masters Thesis, The Johns Hopkins University, Baltimore, MD.
15. Follansbee P.S., and Gray III G.T. An analysis of the low temperature, low and high strain-rate deformation of Ti-6Al-4V. Metall. Trans. A 20A 5 (1989) 863-874
16. Hartley K.A., Duffy J., and Hawley R.H. The torsional Kolsky (split-Hopkinson) bar. Metals Handbook 8 (1985), ASM pp. 218-228
17. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proc. Roy. Soc. London A193 (1948) 281-297
18. Hosford W.F. Texture strengthening. Met. Eng. Q. 6 (1966) 13-19
19. Hosford W. On the yield loci of anisotropic cubic metals. 7th North American Metalworking Conf. (1979), SME, Dearborn, MI 191-197
20. Hosford W. Reflections on the dependence of plastic anisotropy on texture. Mater. Sci. Eng. A257 (1998) 1-8
21. Hosford W. Mechanical Behavior of Materials (2005), Cambridge University Press
22. Karafillis A.P., and Boyce M.C. A general anisotropic yield criteria using bounds and a transformation weighting tensor. J. Mech. Phys. Solids 41 (1993) 1859-1886
23. Kelly E.W., and Hosford W.F. Deformation characteristics of textured magnesium. Trans. TMS AIME 242 (1968) 654-661
24. Khan A.S., and Huang S. Continuum Theory of Plasticity (1995), John Wiley & Sons, New York
25. Khan A.S., and Liang R. Behaviors of three BCC metal over a wide range of strain rates and temperatures: experiments and modeling. Int. J. Plast. 15 9 (1999) 1089-1109
26. Khan A.S., and Liang R. Behaviors of three BCC metals during non-proportional multi-axial loadings: experiments and modeling. Int. J. Plast. 16 12 (2000) 1443-1458
27. Khan A.S., and Wang X. An experimental study of large finite plastic deformation in annealed aluminum during proportional and non-proportional biaxial compression. Int. J. Plast. 6 (1990) 484-504
28. Khan A.S., Suh Y.S., and Kazmi R. Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys. Int. J. Plast. 20 (2004) 2233-2248
29. Lademo O.-G., Hopperstad O.S., and Langseth M. An evaluation of yield criteria and flow rules for aluminum alloys. Int. J. Plast. 15 (1999) 191-208
30. Lademo O.-G., Hopperstad O.S., Malo K.A., and Pedersen K.O. Modelling of plastic anisotropy in heat-treated aluminium extrusions. J. Mater. Proc. Tech. (2002) 84-88
31. Lee D., and Backofen W.A. An experimental determination of the yield locus for titanium and titanium-alloy sheet. TMS - AIME 236 (1966) 1077-1084
32. Lee W.S., and Lin M.T. The effects of strain rate and temperature on the compressive deformation behavior of Ti-6Al-4V alloy. J. Mater. Proc. Tech. 71 1997 (1997) 235-246
33. Lesuer, D.R. 2000. Experimental investigations of material models for Ti-6Al-4V Titanium and 2024-T3 Aluminum. In: Final Report, DOT/FAA/AR-00/25, US Department of Transportation, Federal Aviation Administration.
34. Liang R., and Khan A.S. A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures. Int. J. Plast. 15 (1999) 963-980
35. Liao S.-C., and Duffy J. Adiabatic shear bands in a Ti-6Al-4V titanium alloy. J. Mech. Phys. Solids 46 11 (1998) 2201-2231
36. Macdougall D.A.S., and Harding J. A constitutive relation and failure criterion for Ti-6Al-4V alloy at impact rates of strain. J. Mech. Phys. Solids 47 5 (1999) 1157-1185
37. Marchand A., and Duffy J. An experimental study of the formation process of adiabatic shear bands in a structural steel. J. Mech. Phys. Solids 36 (1988) 251-283
38. Nemat-Nasser S., Guo W.-G., Nesterenko V.F., Indrakanti S.S., and Gu Y.-B. Dynamic response of conventional and hot isostatically pressed Ti-6Al-4V alloys: experiments and modeling. Mech. Mater. 33 8 (2001) 425-439
39. Picu R.C., and Majorell A. Mechanical behavior of Ti-6Al-4V at high and moderate temperatures - Part II: constitutive modeling. Mater. Sci. Eng. A326 2002 (2002) 306-316
40. Staroselsky A., and Anand L. A constitutive model for HCP metals deforming by slip and twinning: application to magnesium alloy AZ31B. Int J. Plast. 19 (2003) 1843-1864
41. Tomé C.N., Agnew S.R., Blumenthal W.R., Bourke M.A.M., Brown D.W., Kaschner G.C., and Rangaswamy P. The relation between texture, twinning and mechanical properties in low symmetry aggregates. Mater. Sci. Forum (2002) 408-412
42. Yoon J.W., Barlat F., Dick R.E., and Karabin M.E. Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function. Int. J. Plast. 22 1 (2006) 174-193