An overview on the use of titanium in the aerospace industry

Materials Science and Engineering: A

Volumn 213, Issue 1-2, 1996, Pages 103-114

  Boyer, R R ^a  

^a BOEING COMPANY   (United States)

Author keywords

Aerospace applications; Aircraft engine alloys; Airframe alloys; Castings; Forgings; Superplastic forming

Indexed keywords

AEROSPACE APPLICATIONS; AIRCRAFT ENGINES; AIRCRAFT MATERIALS; CASTINGS; CORROSION RESISTANCE; COST EFFECTIVENESS; FORGINGS; FORMING; METALLURGY; SUPERPLASTICITY; TITANIUM ALLOYS;

AEROSPACE INDUSTRY; AIRCRAFT ENGINE ALLOYS; AIRFRAME ALLOYS; SUPERPLASTIC FORMING;

TITANIUM;

EID: 0030217270     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/0921-5093(96)10233-1     Document Type: Article

References (50)

1. R.R. Boyer, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), Applications of beta titanium alloys in Airframes, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 335-346.
2. R.R. Boyer, in A. Vassel, D. Eylon and Y. Combres (eds.), Aerospace applications of beta titanium - keynote presentation, Beta Titanium Alloys, Paris, France, Société Francaise de Métallurgie et de Matériaux, 1994, pp. 253-264.
3. P.J. Bania, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), Beta titanium alloys and their role in the titanium industry - keynote lecture, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 3-14.
4. E.W. Collings, The Physical Metallurgy of Titanium Alloys, Materials Park, OH, ASM, 1984, pp. 2-4.
5. T.W. Duerig and J.C. Williams, in R.R. Boyer and H.W. Rosenberg (eds.), Overview: microstructure and properties of beta titanium alloys, Beta Titanium Alloys in the 1980's, Warrendale, PA, TMS, 1984, pp. 19-67.
6. K.E. Thiehsen et al., The effect of nickel, chromium, and primary alpha phase on the creep behavior of Ti-6242Si, Met. Trans. A, 24A (1993) 1819-1826.
7. S.R. Seagle G.S. Hall and H.B. Bomberger, Met. Eng. Q., (1972) 48-54.
8. H.M. Flower, Mater. Sci. Technol., 6 (1990) 1082-1092.
9. S.R. Seagle and H.B. Bomberger, in R.I. Jaffee and N.E. Promisel (eds.), Creep-resistant titanium alloys, The Science, Technology and Application of Titanium, Pergamon, New York, 1970, pp. 1001-1008.
10. R.R. Boyer, Design properties of a high strength titanium alloy, Ti-10V-2Fe-3Al, J. Organomet. Chem., 32 (1980) 61-65.
11. D.P. Davies, in F.H. Froes and I.L. Caplan (eds.), Effect of heat treatment on the mechanical properties of Ti-10V-2Fe-3Al for dynamically critical helicopter components, Titanium '92 Science and Technology, Warrendale, PA, TMS, 1993, pp. 1851-1858.
12. R.S. Carey, R.R. Boyer and H.W. Rosenberg, in G. Lütjering, U. Zwicker and W. Bunk (eds.), Fatigue properties of Ti-10V-2Fe-3Al, Titanium Science and Technology, Deutsche Gesellschaft fur Metallkunde e.V., Oberursel, Germany, 1985, pp. 1261-1267.
13. R.R. Boyer, R. Bajoraitis, D.W. Greenwood and E.E. Mild, in R.R. Boyer and H.W. Rosenberg (eds.), Ti-3Al-8V-6Cr-4Mo-4Zr wire for spring applications, Beta Titanium Alloys in the 1980's, Warrendale, PA, TMS, 1984, pp. 295-305.
14. L. Wagner and J.K. Gregory, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), Improvement of mechanical behavior in Ti-3Al-8V-6Cr-4Mo-4Zr, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 199-209.
15. D. Eylon et al., in P. Lacombe, R. Tricot and G. Béranger (eds.), Casting of high strength beta titanium alloys, Sixth World Conference on Titanium, Société Francaise de Métallurgie, Cedex, France, 1989, pp. 655-660.
16. R.W. Messler, Jr., Electron beam weldability of advanced titanium alloys, Welding Research Supplement, May, 1981, pp. 79-s-84-s.
17. C.C. Chen and R.R. Boyer, Practical considerations for manufacturing high strength Ti-10V-2Fe-3Al forgings, J. Organomet. Chem., 31 (1979) 33-39.
18. R.H. Van Stone et al., Influence of composition, annealing temperature, and texture on the fracture toughness of Ti-5Al-2.5Sn plate at cryogenic temperatures, Toughness and Fracture Behavior of Titanium, ASTM STP 651, Baltimore, MD, ASTM, 1978, pp. 154-179.
19. S. Fujishiro, F.H. Froes, T. Matsumoto and D. Eylon, in G. Lütjering, U. Zwicker and W. Bunk (eds.), Effect of processing on the mechanical properties of IMI-829 titanium alloys, Titanium Science and Technology, Deutsche Gesellschaft fur Metallkunde e.V., Oberursel, Germany, 1985, pp. 593-600.
20. . P.A. Blenkinsop, in G. Lütjering, U. Zwicker and W. Bunk (eds.), Critical review, developments in high temperature alloys, Titanium Science and Technology, Deutsche Gesellschaft fur Metallkunde e.V., Oberursel, Germany, 1985, pp. 2323-2338.
21. D.F. Neal, in G. Lütjering, U. Zwicker and W. Bunk (eds.), Optimisation of creep and fatigue resistance in high temperature Ti alloys IMI 829 and IMI 834, Titanium Science and Technology, Deutsche Gesellschaft fur Metallkunde e.V., Oberursel, Germany, 1985, pp. 2419-2424.
22. D.F. Neal, in P. Lacombe, R. Tricot and G. Béranger (eds.), Development and evaluation on high temperature titanium alloy IMI 834, Sixth World Conference on Titanium, Société Francaise de Métallurgie, Cedex, France, 1989, pp. 253-258.
23. P.J. Bania, in P. Lacombe, R. Tricot and G. Béranger (eds.), Ti-1100: A new high temperature titanium alloy. Sixth World Conference on Titanium, Société Francaise de Métallurgie, Cedex, France, 1989, pp. 825-830.
24. G.W. Kuhlman, in Y.-W. Kim and R.R. Boyer (eds.), A critical appraisal of thermomechanical processing of structural titanium alloys, Microstructure/Property Relationships in Titanium Aluminides and Alloys, Warrendale, PA, TMS, 1991, pp. 465-491.
25. Superplasticity, Agard Lecture Series No. 154, Loughton, UK, AGARD, 1987.
26. H.R. Phelps and J.R. Wood, in F.H. Froes and I.L. Caplan (eds.), Correlation of mechanical properties and microstructures of Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.25S titanium alloy, Titanium '92 Science and Technology, Warrendale, PA, TMS, 1993, pp. 193-199.
27. R.R. Boyer and A.E. Caddey, in F.H. Froes and I.L. Caplan (eds.), The properties of Ti-6Al-2Sn-2Zr-2Mo-2Cr sheet, Titanium '92 Science and Technology, Warrendale, PA, TMS, 1993, pp. 1647-1652.
28. R.C. Bliss, in F.H. Froes and I.L. Caplan (eds.), Evaluation of Ti-6Al-2Sn-2Zr-2Mo-2Cr-.23Si sheet, Titanium '92 Science and Technology, Warrendale, PA, TMS, 1993, pp. 201-208.
29. T.K. Redden, in R.R. Boyer and H.W. Rosenberg (eds.), Processing and properties of the Ti-17 alloy for aircraft gas turbine engines, Beta Titanium Alloys in the 1980's, Warrendale, PA, TMS, 1984, pp. 239-254.
30. H.W. Rosenberg, in R.R. Boyer and H.W. Rosenberg (eds.), Ti-17 properties, Beta Titanium Alloys in the 1980's, Warrendale, PA, TMS, 1984, pp. 433-439.
31. R.R. Boyer and H.W. Rosenberg, Beta titanium on the SR-71: Historical note I, Beta Titanium Alloys in the 1980's, Warrendale, PA, TMS, 1984, pp. 1-8.
32. W.M. Parris and H.W. Rosenberg, in R.R. Boyer and H.W. Rosenberg (eds.), Producing Ti-13V-11Cr-3Al mill product at TMCA: Historical note II, Beta Titanium Alloys in the 1980's, Warrendale, PA, TMS, 1984, pp. 9-15
33. R.R. Boyer, R. Bajoraitis, D.W. Greenwood and E.E. Mild, in R.R. Boyer and H.W. Rosenberg (eds.), Ti-3Al-8V-6Cr-4Mo-4Zr wire for spring applications, Beta Titanium Alloys in the 1980's, Warrendale, PA, TMS, 1984, pp. 295-305.
34. A.M. Sherman and S.R. Seagle, in R.R. Boyer and H.W. Rosenberg (eds.), Torsional properties and performance of beta titanium alloy automotive suspension springs, Beta Titanium Alloys in the 1980's, Warrendale, PA, TMS, 1984, pp. 281-293.
35. W.J. Porter and D. Eylon, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), Effect of HIP and heat treatment on fatigue initiation and tensile failure in Ti-15V-3Cr-3Al-3Sn Castings, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 273-281.
36. W.J. Porter, R.R. Boyer and D. Eylon, in F.H. Froes and I.L. Caplan (eds.), Effects of microstructure on the mechanical properties of Ti-15V-3Cr-3Al-3Sn castings, Titanium '92 Science and Technology, Warrendale, PA, TMS, 1993. pp. 1511-1518.
37. G.W. Kuhlman, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), ALCOA titanium alloy Ti-10V-2Fe-3Al forgings, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 485-512.
38. T.W. Duerig, J.E. Allison and J.C. Williams, Microstructural influences on fatigue crack propagation in Ti-10V-2Fe-3Al, Met. Trans. A, 16A (1985) 739-751.
39. J.C. Fanning, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), Timetal 21S property data, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 397-410.
40. R.R. Boyer and J.A. Hall, in F.H. Froes and I.L. Caplan (eds.), Microstructure-property relationships in titanium alloys (critical review), Titanium '92 Science and Technology, Warrendale, PA, TMS, 1993, pp. 77-88.
41. J.S. Grauman, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), Effects of aircraft hydraulic fluid on TIMETAL 21S, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 127-135.
42. R.W. Schutz, in A. Vassel, D. Eylon and Y. Combres (eds.), An overview of beta titanium alloy environmental behavior, Beta Titanium Alloys, Paris, France, Société Francaise de Métallurgie et de Matériaux, 1994, pp. 215-228.
43. D. Eylon, in A. Vassel, D. Eylon and Y. Combres (eds.), A review of beta titanium alloys, Beta Titanium Alloys, Paris, France, Société Francaise de Métallurgie et de Matériaux, 1994, pp. 75-82.
44. G.N. Colvin, D.W. Anderson and R.J. Schmalholz, Permanent mold castings of titanium aerospace components, Titanium 1994 Products and Applications, Boulder, CO, TDA, 1994, pp. 84-90.
45. P.J. Bania, A.J. Hutt, R.E. Adams and W.M. Parris, F.H. Froes and I.L. Caplan (eds.), A new low cost titanium alloy, Titanium '92 Science and Technology, Warrendale, PA, TMS, 1993, pp. 2787-2794.
46. P.J. Bania, in A. Vassel, D. Eylon and Y. Combres (eds.), Beta titanium alloys and their role in the titanium industry, Beta Titanium Alloys, Paris, France, Société Francaise de Métallurgie et de Matériaux, 1994, pp. 7-20.
47. Titanium Con Rods Boost Power, Advanced Materials and Processing, June 1993, pp. 24-26.
48. M. Ishikawa, O. Kuboyama, M. Niikura and C. Ouchi, in F.H. Froes and I.L. Caplan (eds.), Microstructure and mechanical properties relationship of β-Rich α/β alloy; SP-700, Titanium '92 Science and Technology, Warrendale, PA, TMS, 1993, pp. 141-148.
49. T. Fujita, M. Ishikawa, S. Hashimoto, K. Minakawa and C. Ouchi, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), Fatigue and fracture toughness properties in the beta-rich α + β alloy SP-700, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 297-307.
50. A. Ogawa, H. Fukai, K. Minakawa and C. Ouchi, in D. Eylon, R.R. Boyer and D.A. Koss (eds.), SP-700 titanium alloy data sheet, Beta Titanium Alloys in the 1990's, Warrendale, PA, TMS, 1993, pp. 513-524.