A dislocation density-based single crystal constitutive equation

International Journal of Plasticity

Volumn 26, Issue 7, 2010, Pages 925-938

  Lee, M G ^a   Lim, H ^b   Adams, B L ^c   Hirth, J P ^d   Wagoner, R H ^b  

^a Pohang University of Science and Technology (POSTECH)   (South Korea)

^b The Ohio State University   (United States)

^c Brigham Young University   (United States)

^d NONE   (United States)

Author keywords

Constitutive equation; Dislocation density; Orowan hardening; Single crystal

Indexed keywords

ADJUSTABLE PARAMETERS; CRYSTAL PLASTICITY FINITE ELEMENT; DISLOCATION DENSITIES; DISLOCATION DENSITY; DISLOCATION DENSITY EVOLUTION; FIT PARAMETERS; FLOW CURVES; FLOW RESISTANCE; FLOW STRESS; GEOMETRIC RELATIONSHIPS; MATRIX; MULTIPLE SLIPS; OROWAN HARDENING; PHENOMENOLOGICAL ASPECTS; PLASTIC RESPONSE; POLYCRYSTALLINE TEXTURES; PREDICTIVITY; SINGLE SLIP; SLIP PLANE; SLIP SYSTEM; STANDARD DEVIATION; TENSILE TESTS; TEXTURE ANALYSIS; TEXTURE EVOLUTIONS;

COMPUTER SIMULATION; CONSTITUTIVE EQUATIONS; CRYSTALLOGRAPHY; DISLOCATIONS (CRYSTALS); HARDENING; PLASTIC FLOW; POLYCRYSTALS; STRESS-STRAIN CURVES; TENSILE TESTING; TEXTURES;

SINGLE CRYSTALS;

EID: 77955172579     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2009.11.004     Document Type: Article

References (62)

1. R.K. Abu Al-Rub, and G.Z. Voyiadjis A direct finite element implementation of the gradient-dependent theory Int. J. Numer. Meth. Engng. 63 2005 603 629
2. J. Alcalá, O. Casals, and J. Oenáek Micromechanics of pyramidal indentation in FCC metals: Single crystal plasticity finite element analysis J. Mech. Phys. Solids. 56 2008 3277 3303
3. L. Anand, and M. Kothari A computational procedure for rate-independent crystal plasticity J. Mech. Phys. Solids 44 1996 525
4. A. Arsenlis, and D.M. Parks Modeling the evolution of crystallographic dislocation density in crystal plasticity J. Mech. Phys. Solids 50 2002 1979
5. R.J. Asaro Geometrical effects in the inhomogeneous deformation of ductile single crystals Acta. Metall. 27 1979 445
6. R.J. Asaro Micromechanics of crystals and polycrystals Adv. Appl. Mech. 23 1983 1 115
7. R.J. Asaro, and A. Needleman Texture development and strain hardening in rate dependent polycrystals Acta Metall. 33 1985 923 953
8. R.J. Asaro, and J.R. Rice Strain localization in ductile single crystals J. Mech. Phys. Solids 25 1977 309 338
9. J.L. Bassani, and T.Y. Wu Latent hardening in single crystals. ii. Analytical characterization and predictions Proc. R. Soc. Lond. A 435 1991 21
10. A.J. Beaudoin, P.R. Dawson, K.K. Mathur, U.F. Kocks, and D.A. Korzekwa Application of polycrystal plasticity to sheet forming Comput. Meth. Appl. Mech. Eng. 117 1994 49 70
11. R. Becker, and S. Panchanadeeswaran Effects of grain interactions on deformation and local texture in polycrystals Acta Metall. Mater. 43 1995 2701
12. C.A. Bronkhorst, S.R. Kalidinidi, and L. Anand Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals Philos. Trans. Roy. Soc. Lond. A 341 1992 443
13. S.B. Brown, K.H. Kim, and L. Anand An internal variable constitutive model for hot working of metals Int. J. Plasticity 5 1989 95 130
14. G.R. Canova, U.F. Kocks, C.N. Tome, and J.J. Jonas The yield surface of textured polycrystals J. Mech. Phys. Solids 33 1985 371 397
15. P.R. Dawson Computational crystal plasticity Int. J. Solids Struct. 37 2000 115 130
16. P.R. Dawson, S.R. MacEwen, and P.D. Wu Advances in sheet metal forming analyses, dealing with mechanical anisotropy from crystallographic texture Int. Mater. Rev. 48 2 2003 86 122
17. P. Franciosi, and A. Zaoui Multislip in F.C.C crystals: a theoretical approach compared with experimental data Acta Metall. 30 1982 1627
18. Hibbit, K.S.I., 2005. ABAQUS/Standard User's Manual.
19. R. Hill Generallized constitutive relations for incremental deformation of metal crystals by multislip J. Mech. Phys. Solids 14 1966 95
20. R. Hill, and J.R. Rice Constitutive analysis of elastic plastic crystals at arbitrary strain J. Mech. Phys. Solids 20 1972 401
21. J.P. Hirth, and J. Lothe Theory of Dislocations 1969 McGraw-Hill New York
22. J.W. Hutchinson Bounds and Self-consistent Estimates for Creep of Polycrystalline Materials 1976 Proc. R. Soc. London
23. S.R. Kalidindi, C.A. Bronkshorst, and L.J. Anand Crystallographic texture evolution in bulk deformation processing of FCC metals J. Mech. Phys. Solids 40 1992 537
24. A.S. Keh Work hardening and deformation sub-structure in iron single crystals deformed in tension at 298 K Phil. Mag. 12 1965 9
25. U.F. Kocks The relation between polycrystal deformation and single crystal deformation Metall. Trans. 1 1970 1121 1143
26. U.F. Kocks Laws for work-hardening and low-temperature creep J. Engng Mater. Tech. (ASME H) 98 1976 76
27. Kröner Zur Plastichen Verformung des Vielkristalls Acta Metall. 9 1961 155
28. S.N. Kuchnicki, A.M. Cuitiño, and R.A. Radovitzky Efficient and robust constitutive integrators for single-crystal plasticity modeling Int. J. Plasticity 22 2006 1988 2011
29. A. Kumar, and P.R. Dawson Modeling crystallographic texture evolution with finite elements over neo-Eulerian orientation spaces Comput. Meth. Appl. Mech. Eng. 153 1998 259
30. A.V. Kumar, and C. Yang Study of work hardening models for single crystals using three dimensional finite element analysis Int. J. Plasticity 15 1999 737
31. E.H. Lee Elastic-plastic deformation at finite strains J. Appl. Mech. 36 1969 1
32. Y. Liu, S. Varghese, J. Ma, M. Yoshino, H. Lu, and R. Komanduri Orientation effects in nanoindentation of single crystal copper Int. J. Plasticity 24 2008 1990 2015
33. Y. Liu, B. Wang, M. Yoshino, S. Roy, H. Lu, and R. Komanduri Combined numerical simulation and nanoindentation for determining mechanical properties of single crystal copper at mesoscale J. Mech. Phys. Solids 53 12 2005 2718 2741
34. A. Ma, F. Roters, and D. Raabe A constitutive model for FCC single crystals based on dislocation densities and its application to uniaxial compression of aluminum single crystals Acta Mater. 52 2004 3603 3612
35. A. Ma, F. Roters, and D. Raabe A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations Acta Mater. 54 2006 2169 2179
36. J. Mandel Generalization de la theorie de la plasticite de W.T. Koiter Int. J. Solid Struct. 1 1965 273
37. E.B. Marin, and P.R. Dawson On modeling the elasto-viscoplastic response of metals using polycrystal plasticity Comput. Meth. Appl. Mech. Eng. 165 1-4 1998 1 21
38. K.K. Mathur, and P.R. Dawson On modeling the development of crystallographic texture in bulk forming precesses Int. J. Plasticity 5 1989 67 94
39. A. Molinari, G.R. Canova, and S. Ahzi A self consistent approach of the large deformation polycrystal viscoplasticity Acta Metall. 35 1987 2983 2994
40. E. Nakamachi, C.L. Xie, and M. Harimoto Drawbility assessment of BCC steel sheet by using elastic/crystalline viscoplastic finite element analyses Int. J. Mech. Sci. 43 2001 631 652
41. S. Nemat-Nasser, L.Q. Ni, and T. Okinaka A constitutive model for FCC crystals with application to polycrystalline OFHC copper Mech. Mater. 30 1998 325
42. E. Orowan Problems of plastic gliding Proc. Phys. Soc. 52 1940 8 22
43. E. Orowan Symposium on Internal Stresses in Metals and Alloys 1948 The Institute of Metals London 451-453
44. M. Ortiz, and E. Popov A statistical theory of polycrystalline plasticity Comput. Meth. Appl. Mech. Eng. 90 1982 781
45. M. Ortiz, E.A. Repetto, and L. Stainer A theory of subgrain dislocation structures J. Mech. Phys. Solids 48 1999 2077 2114
46. D.M. Parks, and S. Ahzi Polycrystalline plastic deformation and texture evolution for crystals lacking five independent slip systems J. Mech. Phys. Solids 38 1990 701 724
47. S.D. Patil, R. Narasimhan, P. Biswas, and R.K. Mishra Crack tip fields in a single edge notched aluminum single crystal specimen J. Eng. Mater. Technol. 130 2 2008 021013-1 021013-11
48. D. Peirce, R.J. Asaro, and A. Needleman An analysis of nonuniform and localized deformation in ductile single crystals Acta Metall. 30 1982 1087
49. D. Raabe, P. Klose, B. Engl, K.P. Imlau, F. Friedel, and F. Roters Concepts for integrating plastic anisotropy into metal forming simulation Adv. Eng. Mater. 4 4 2002 169 180
50. D. Raabe, D. Ma, and F. Roters Effects of initial orientation, sample geometry and friction on anisotropy and crystallographic orientation changes in single microcompression deformation: a crystal plasticity finite element study Acta. Mater. 55 2007 4567 4583
51. J.R. Rice Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity J. Mech. Phys. Solids 19 1971 433
52. F. Roters, D. Raabe, and G. Gottstein Work hardening in heterogeneous alloys alloys - a microstructural approach based on three internal state variables Acta Mater. 48 2000 4181 4189
53. G. Sachs Zur Ableitung Einer Fliessbedingung Z. Ver. Dtsch. Ing. 72 1928 734 736
54. G. Simmons, and H. Wang Single Crystal Elastic Constants and Calculated Aggregate Properties 1971 The MIT Press Cambridge, MA
55. T. Takeuchi Work hardening of copper single crystals with multiple glide orientation Trans. Jpn. Inst. Metals 62 1975 307
56. G.I. Taylor Plastic Strain in Metals J. Inst. Metals 62 1938 307
57. A.G. Thakare, R. Narasimhan, and R.K. Mishra Numerical simulations of void growth near a notch tip in ductile single crystals Mech. Mater. 41 2009 506 519
58. H. Wang, K.C. Hwang, Y. Huang, P.D. Wu, B. Liu, G. Ravichandran, C.-S. Han, and H. Gao A conventional theory of strain gradient crystal plasticity based on the Taylor dislocation model Int. J. Plasticity 23 2007 1540 1554
59. Y. Wang, D. Raabe, C. Kluber, and F. Roters Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals Acta. Mater. 52 2004 2229 2238
60. J. Weertman, and J.R. Weertman Elementary Dislocation Theory 1992 Oxford Univ. Press
61. N. Zaafarani, D. Raabe, C. Klüber, F. Roters, and S. Zaefferer Three dimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations Acta. Mater. 54 2006 1707 1994
62. S. Zaefferer, J.-C. Kuo, Z. Zhao, M. Winning, and D. Raabe On the influence of the grain boundary misorientation on the plastic deformation of aluminum bicrystals Acta. Mater. 51 2003 4719 4735