Modelling mechanical property recovery of a linepipe steel in annealing process

International Journal of Plasticity

Volumn 25, Issue 6, 2009, Pages 1049-1065

  Li, H ^a   Lin, J ^b   Dean, T A ^a   Wen, S W ^c   Bannister, A C ^c  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^b IMPERIAL COLLEGE LONDON   (United Kingdom)

^c SWINDEN TECHNOLOGY CENTRE   (Netherlands)

Author keywords

Annealing; Cold forming; Damage recovery; Materials modelling; Recrystallisation of ferritic steel

Indexed keywords

ANNEALING; COMPUTER PROGRAMMING; CONSTITUTIVE EQUATIONS; DEFORMATION; FERRITE; FERRITIC STEEL; FORMING; MECHANICAL PROPERTIES; MICROSTRUCTURAL EVOLUTION; PIPELINES; RECRYSTALLIZATION (METALLURGY); SINGLE CRYSTALS; STEEL METALLOGRAPHY; STEEL PIPE; STRAIN RATE; STRESS-STRAIN CURVES; TENSILE TESTING;

ANNEALING PROCESS; ANNEALING TIME; BEFORE AND AFTER; COLD FORMING; COLD-FORMED; CONSTANT STRAIN RATES; DAMAGE ACCUMULATIONS; DAMAGE RECOVERY; DISLOCATION DENSITIES; EVOLUTIONARY PROGRAMMING; HOLDING TIME; LINE PIPE STEELS; LOW CARBONS; MATERIALS MODELLING; OPTIMISATION METHODS; PRE DEFORMATIONS; RECRYSTALLISATION OF FERRITIC STEEL; STRESS-STRAIN RELATIONSHIPS; TENSILE TESTS; UNIFIED CONSTITUTIVE EQUATIONS; VISCOPLASTIC CONSTITUTIVE EQUATIONS;

METAL ANALYSIS;

EID: 63249134099     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.09.001     Document Type: Article

References (47)

1. Barnett, M.R., Jonas, J.J., Hodgson, P.D., 1994. Grain size after warm working and recrystallisation of a low carbon steel. In: Proceedings of 36th Mechanical Working and Steel Processing Conference, Baltimore, pp. 385-391.
2. Beyerlein I.J., and Tomé C.N. A dislocation-based constitutive law for pure Zr including temperature effects. Int. J. Plasticity 24 (2008) 867-895
3. Bocher L., Delobelle P., Robinet P., and Feaugas X. Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension-torsion internal and external pressure. Int. J. Plasticity 17 (2001) 1491-1530
4. Brinckmann S., Siegmund T., and Huang Y. A dislocation density based strain gradient model. Int. J. Plasticity 22 (2006) 1784-1797
5. Bucher A., Görke U.J., and Kreißig R. A material model for finite elasto-plastic deformations considering a substructure. Int. J. Plasticity 20 (2004) 619-642
6. Cao, J., Lin, J., Dean, T.A., 2006. User's manual for OPT-CE: an optimizer for the determination of constitutive equations. Internal Report MFG2006-003, Springer, Berlin.
7. Chaboche J.L. Continuum damage mechanics: present state and future trends. Nucl. Eng. Des. 105 (1987) 19-33
8. Dunne F.P.E., Nanneh M.M., and Zhou M. An isothermal large deformation constitutive equations and their application to modelling titanium alloys in forging. Phil. Mag. A 75 (1997) 587-610
9. Estrin Y. Dislocation density related constitutive modelling. Unified constitutive laws of plastic deformation (1996), Academic Press, New York 69-106
10. Estrin Y. Dislocation theory based constitutive modelling: foundations and applications. J. Mater. Process. Tech. 80-81 (1998) 33-39
11. Estrin Y., Tóth L.S., Molinari A., and Bréchet Y. A dislocation-based model for all hardening stages in large strain deformation. Acta Mater. 46 (1998) 5509-5522
12. Foster, A.D., Lin, J., Liu, Y., Farrugia, D., Dean, T.A., 2005. Constitutive modelling of damage accumulation during the hot deformation of free-cutting steels. In: Proceedings of the 8th Esaform conference I, pp. 201-204.
13. Farrugia D.C.J., and Howe A.A. Alloy design: from composition to through process models. Mater. Sci. Technol. 15 (1999) 15-21
14. Gurson L. Continuum theory of ductile rupture by void nucleation and growth: Part I - Yield criteria and flow rules for porous ductile media. J. Eng. Mater. Tech. 99 (1979) 2-15
15. Hesselbarth H.W., and Göbel I.R. Simulation of recrystallization by cellular automata. Acta Metall. Mater. 39 (1991) 2135-2143
16. Hoc T., and Forest S. Polycrystal modelling of IF-Ti steel under complex loading path. Int. J. Plasticity 17 (2001) 65-85
17. Houtte P.V., Li S., Seefeldt M., and Delannay L. Deformation texture prediction: from the Taylor model to the advanced Lamel model. Int. J. Plasticity 21 (2005) 589-624
18. Huang E., Barabash R.I., Wang Y., Clausen B., Li L., Liaw P.K., Ice G.E., Ren Y., Choo H., Pike L.M., and Klarstrom D.L. Plastic behavior of a nickel-based alloy under monotonic-tension and low-cycle-fatigue loading. Int. J. Plasticity 24 (2008) 1440-1456
19. Humphreys F.J., and Hatherly M. Recrystallization and Related Annealing Phenomena (1996), Pergamon
20. Humphreys F.J. A unified theory of recovery, recrystallisation and grain growth, based on the stability and growth of cellular microstructures II - The effect of second-phase particles. Acta Mater. 45 (1997) 5031-5039
21. Khaleel M.A., Zbib H.M., and Nyberg E.A. Constitutive modelling of deformation and damage in superplastic materials. Int. J. Plasticity 17 (2001) 277-296
22. Kocks U.F. Laws for work-hardening and low-temperature creep. J. Eng. Mater. Technol. 98 (1976) 76-85
23. Kocks U.F., and Mecking H. Physics and phenomenology of strain hardening: the FCC case. Prog. Mater. Sci. 48 (2003) 171-273
24. Kwiecinski J., and Wyrzykowski J.W. The effect of recovery annealing after small plastic deformations on the yield strength of polycrystalline aluminium. Acta Metall. Mater. 41 (1993) 3089-3095
25. Li B., Lin J., and Yao X. A novel evolutionary algorithm for determining unified creep damage constitutive equations. Int. J. Mech. Sci. 44 (2002) 1002-5987
26. Li S., Hoferlin E., Bael A.V., Houtte P.V., and Teodosiu C. Finite element modeling of plastic anisotropy induced by texture and strain-path change. Int. J. Plasticity 20 (2004) 915-936
27. Lin J., and Yang J. GA-based multiple objective optimisation for determining viscoplastic constitutive equations for superplastic alloys. Int. J. Plasticity 15 (1999) 1181-1196
28. Lin J., Liu Y., Farrugia D.C.J., and Zhou M. Development of dislocation-based unified material model for simulating microstructure evolution in multipass hot rolling. Philos. Mag. 85 (2005) 1967-1987
29. Lin J., and Liu Y. A set of unified constitutive equations for modelling microstructure evolution in hot deformation. J. Mater. Process. Tech. 143 (2005) 281-285
30. Majta J., and Zurek A.K. Modelling of ferrite structure after deformation in the two-phase region. Int. J. Plasticity 19 (2003) 707-730
31. Martínez-de-Guerenu A., Arizti F., Díaz-Fuentes M., and Gutiérrez I. Recovery during annealing in a cold rolled low carbon steel. Part I: Kinetics and microstructure characterization. Acta Mater. 52 (2004) 3657-3664
32. Martínez-de-Guerenu A., Arizti F., and Gutiérrez I. Recovery during annealing in a cold rolled low carbon steel. Part II: Modelling the kinetics. Acta Mater. 52 (2004) 3665-3670
33. Marx V., Reher F.R., and Gottstein G. Simulation of primary recrystallization using a modified three-dimensional cellular automaton. Acta Mater. 47 (1999) 1219-1230
34. Mayama T., Sasaki K., and Ishikawa H. A constitutive model of cyclic viscoplasticity considering changes in subsequent viscoplastic deformation due to the evolution of dislocation structures. Int. J. Plasticity 23 (2007) 915-930
35. Nes E. Modelling of work hardening and stress saturation in FCC metals. Process Mater. Sci. 41 (1998) 129-193
36. Preußner, J., Rudnik, Y., Brehm, H., Völkl, R., Glatzel, U., in press. A dislocation density based material model to simulate the anisotropic creep behaviour of single-phase and two-phase single crystals. Int. J. Plasticity.
37. Priestner R., and Ibraheem A.K. Processing of steel for ultrafine ferrite grain structures. Mater. Sci. Tech. 16 (2000) 1267-1272
38. Rice J.R., and Tracey D.M. On the ductile enlargement off voids in triaxial stress fields. J. Mech. Phys. Solids 17 (1969) 201-217
39. Sakai T., and Jonas J.J. Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations. Acta Metall. 32 (1984) 189-209
40. Sandström R., and Lagneborg R. A model for hot working occurring by recrystallization. Acta Metall. 23 (1975) 387-398
41. Sevillano J.G., Houtte P., and Aernoudt E. Large strain work hardening and textures. Prog. Mater. Sci. 25 (1980) 69-134
42. Srolovitz D.J., Grest G.S., Anderson M.P., and Rollett A.D. Computer simulation of recrystallization - II. Heterogeneous nucleation and growth. Acta Metall. 36 (1988) 2128-2155
43. Trivedi P., Field D.P., and Weiland H. Alloying effects on dislocation substructure evolution of aluminum alloys. Int. J. Plasticity 20 (2004) 459-476
44. Uenishi A., and Teodosiu C. Constitutive modelling of the high strain rate behaviour of interstitial-free steel. Int. J. Plasticity 20 (2004) 915-936
45. Wen, S.W., Hilton, P., Farrugia, D.C.J., 1999. Finite Element Modelling of a Submerged Arc Welding Process. In: Proceedings of the International Conference on Advances in Materials and Processing Technologies, pp. 737-746.
46. Zhang J., and Jiang Y. An experimental investigation on cyclic plastic deformation and substructures of polycrystalline copper. Int. J. Plasticity 21 (2005) 2191-2211
47. Zhao X., Guest R.P., Tin S., Cole D., Brooks J.W., and Peers M. Modelling hot deformation of Inconel 718 using state variables. Mater. Sci. Tech. 20 (2004) 1414-1420