The variation of strain rate sensitivity exponent and strain hardening exponent in isothermal compression of Ti-6Al-4V alloy

Materials and Design

Volumn 31, Issue 2, 2010, Pages 741-748

  Luo, Jiao ^a   Li, Miaoquan ^a   Yu, Weixin ^a   Li, Hong ^a  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

Grain size; Isothermal compression; Strain hardening exponent; Strain rate sensitivity exponent; Titanium alloy

Indexed keywords

DEFORMATION BEHAVIOR; DEFORMATION TEMPERATURES; GRAIN SIZE; HEIGHT REDUCTION; ISOTHERMAL COMPRESSION; ISOTHERMAL COMPRESSIONS; PROCESSING PARAMETERS; STRAIN HARDENING EXPONENT; STRAIN RATE SENSITIVITY EXPONENT; THERMAL SOFTENING; TI-6AL-4V ALLOY; WORK HARDENING;

ALLOYS; ALUMINUM; DEFORMATION; GRAIN SIZE AND SHAPE; PLASTICITY; SENSITIVITY ANALYSIS; STRAIN HARDENING; TITANIUM; TITANIUM ALLOYS; VANADIUM ALLOYS;

STRAIN RATE;

EID: 70350050372     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.09.055     Document Type: Article

References (33)

1. Follansbee P.S., and Gray G.T. An analysis of the low temperature, low and high strain-rate deformation of Ti-6Al-4V. Metall Mater Trans A 20 5 (1989) 863-874
2. Lee W.S., and Lin M.T. The effects of strain rate and temperature on the compressive deformation behaviour of Ti-6Al-4V alloy. J Mater Process Technol 71 2 (1997) 224-234
3. Lee W.S., and Lin C.F. Plastic deformation and fracture behaviour of Ti-6Al-4V alloy loaded with high strain rate under various temperatures. Mater Sci Eng A 241 1-2 (1998) 48-59
4. Lee W.S., and Lin C.F. High-temperature deformation behaviour of Ti6Al4V alloy evaluated by high strain-rate compression tests. J Mater Process Technol 75 1-3 (1998) 127-136
5. Semiatin S.L., and Bieler T.R. The effect of alpha platelet thickness on plastic flow during hot working of Ti-6Al-4V with a transformed microstructure. Acta Mater 49 17 (2001) 3565-3573
6. Nemat-Nasser S., Guo W.G., Nesterenko V.F., Indrakanti S.S., and Gu Y.B. Dynamic response of conventional and hot isostatically pressed Ti-6Al-4V alloys: experiments and modeling. Mech Mater 33 8 (2001) 425-439
7. Majorell A., Srivatsa S., and Picu R.C. Mechanical behavior of Ti-6Al-4V at high and moderate temperatures - Part I{cyrillic, ukrainian}: experimental results. Mater Sci Eng A 326 2 (2002) 297-305
8. Kim J.H., Semiatin S.L., and Lee C.S. Constitutive analysis of the high-temperature deformation of Ti-6Al-4V with a transformed microstructure. Acta Mater 51 18 (2003) 5613-5626
9. Khan A.S., Suh Y.S., and Kazmi R. Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys. Int J Plast 20 12 (2004) 2233-2248
10. Zhao J.W., Ding H., Zhao W.J., Tian X.F., Hou H.L., and Wang Y.Q. Influence of hydrogenation on microstructures and microhardness of Ti6Al4V alloy. Trans Nonferrous Metal Soc China 18 3 (2008) 506-511
11. Lin J., and Dunne F.P.E. Modelling grain growth evolution and necking in superplastic blow-forming. Int J Mech Sci 43 3 (2001) 595-609
12. Lin J., and Yang J.B. GA-based multiple objective optimisation for determining viscoplastic constitutive equations for superplastic alloys. Int J Plasticity 15 11 (1999) 1181-1196
13. Hedworth J., and Stowell M.J. The measurement of strain-rate sensitivity in superplastic alloys. J Mater Sci 6 (1971) 1061-1069
14. Arieli A., and Rosen A. Measurement of the strain rate sensitivity coefficient in superplastic Ti-6Al-4V alloy. Scripta Metall 10 5 (1976) 471-475
15. Aran A. An experimental comparison of different methods to determine the rate sensitivity index of superplastic materials. Scripta Metall 13 9 (1979) 843-846
16. Stüwe H.P., and Les P. Strain rate sensitivity of flow stress at large strains. Acta Mater 46 18 (1998) 6375-6380
17. Vasin R.A., Enikeev F.U., and Mazurski M.I. Determination of the strain rate sensitivity of a superplastic material at constant load test. Mater Sci Eng A 224 1-2 (1997) 131-135
18. Ghosh A.K. On the measurement of strain-rate sensitivity for deformation mechanism in conventional and ultra-fine grain alloys. Mater Sci Eng A 463 1-2 (2007) 36-40
19. Wang G.C., and FU M.W. Maximum m superplasticity deformation for Ti-6Al-4V titanium alloy. J Mater Process Technol 192-193 (2007) 555-560
20. Romhanji E., Dudukovska M., and Glišić D. The effect of temperature on strain-rate sensitivity in high strength Al-Mg alloy sheet. J Mater Process Technol 125-126 (2002) 193-198
21. Picu R.C., Vincze G., Ozturk F., Gracio J.J., Barlat F., and Maniatty A.M. Strain rate sensitivity of the commercial aluminum alloy AA5182-O. Mater Sci Eng A 390 1-2 (2005) 334-343
22. Lee W.S., Lin C.F., Chen T.H., and Hwang H.H. Effects of strain rate and temperature on mechanical behavior of Ti-15Mo-5Zr-3Al alloy. J Mech Behav Biomed Mater 1 4 (2008) 336-344
23. Chiou S.T., Tsai H.L., and Lee W.S. Impact mechanical response and microstructural evolution of Ti alloy under various temperatures. J Mater Process Technol 209 5 (2009) 2282-2294
24. del Valle J.A., and Ruano O.A. Influence of the grain size on the strain rate sensitivity in an Mg-Al-Zn alloy at moderate temperatures. Scripta Mater 55 9 (2006) 775-778
25. Ebrahimi R., and Pardis N. Determination of strain-hardening exponent using double compression test. Mater Sci Eng A 518 1-2 (2009) 56-60
26. Narayanasamy R., Ramesh T., and Pandey K.S. Some aspects on strain hardening behaviour in three dimensions of aluminium-iron power metallurgy composite during cold upsetting. Mater Des 27 8 (2006) 640-650
27. Narayanasamy R., Ramesh T., and Pandey K.S. An experimental investigation on strain hardening behaviour aluminium-3.5% alumina power metallurgy composite preform under various stress states during cold upsetting forming. Mater Des 28 4 (2007) 1211-1223
28. Narayanasamy R., Selvakumar N., and Pandey K.S. Phenomenon of instantaneous strain hardening behaviour of sintered Al-Fe composite preforms during cold axial forming. Mater Des 28 4 (2007) 1358-1363
29. Narayanasamy R., Ramesh T., Pandey K.S., and Pandey S.K. Effect of particle size on new constitutive relationship of aluminium-iron power metallurgy composite during cold upsetting. Mater Des 29 5 (2008) 1011-1026
30. Antoine P., Vandeputte S., and Vogt J.B. Empirical model predicting the value of the strain-hardening exponent of a Ti-IF steel grade. Mater Sci Eng A 433 1-2 (2006) 55-63
31. Backfen W.A., Turner I.R., and Avery D.H. Superplasticity in an Al-Zn alloy. ASM Trans Quart 57 (1964) 980-990
32. Lee D., and Backofen W.A. An experimental determination of the yield locus for titanium and titanium-alloy sheet. Trans Metal Soc AIME 239 (1967) 1034-1041
33. Holloman J.H. Tensile deformations. Trans Metal Soc AIME 162 (1945) 268-290