In vitro evaluation of Stiffness Graded artificial hip joint femur head in terms of joint stresses distributions and dimensions: Finite element study

Journal of Materials Science: Materials in Medicine

Volumn 22, Issue 6, 2011, Pages 1589-1598

  Fouad, H ^a,b  

^a Engineering Department   (Egypt)

^b KING SAUD UNIVERSITY   (Saudi Arabia)

Author keywords

[No Author keywords available]

Indexed keywords

3D FINITE ELEMENT MODEL; ARTIFICIAL HIP JOINT; COBALT-CHROMIUM ALLOYS; CONTACT STRESS; DIFFERENT SIZES; FINITE ELEMENT; FINITE-ELEMENT STUDY; GEOMETRICAL PARAMETERS; HEAD JOINTS; HIGH STIFFNESS; HIP JOINTS; IN-VITRO EVALUATION; METAL BACKINGS; OUTER SURFACE; RADIAL CLEARANCE; STRESSES DISTRIBUTION; TI ALLOYS; TOTAL HIP JOINTS;

ALLOYS; CHROMIUM; CHROMIUM ALLOYS; COBALT; FINITE ELEMENT METHOD; MOLYBDENUM; STAINLESS STEEL; STIFFNESS; THERMOELECTRICITY; THREE DIMENSIONAL; TITANIUM; TITANIUM ALLOYS;

HIP PROSTHESES;

ALLOY; CHROMIUM; COBALT; MOLYBDENUM; STAINLESS STEEL; TITANIUM;

ARTICLE; FEMUR HEAD; FINITE ELEMENT ANALYSIS; HUMAN; IN VITRO STUDY; MATERIAL STATE; MECHANICAL STRESS; PRIORITY JOURNAL; RIGIDITY; TOTAL HIP PROSTHESIS;

CHROMIUM ALLOYS; COMPUTER SIMULATION; ELASTICITY; EQUIPMENT FAILURE ANALYSIS; FEMUR HEAD; FINITE ELEMENT ANALYSIS; HIP JOINT; HIP PROSTHESIS; HUMANS; MODELS, THEORETICAL; PROSTHESIS DESIGN; STAINLESS STEEL; STRESS, MECHANICAL; TITANIUM;

EID: 80051580442     PISSN: 09574530     EISSN: 15734838     Source Type: Journal    
DOI: 10.1007/s10856-011-4319-2     Document Type: Article

References (39)

1. Barbour P S M, Barton DC, Fisher J. The Influence of contact stress on the wear of UHMWPE for total replacement hip prostheses. Wear. 1995;181:250-7.
2. McNie CM, Barton DC, Ingham E, Tipper JL, Fisher J, Stone MH. The prediction of polyethylene wear rate and debris morphology produced by microscopic asperities on femoral heads. J Mater Sci: Mater Med. 2000;11:163-74. (Pubitemid 30142834)
3. Teoh SH, Chan WH, Thampuran R. An elasto-plastic finite element model for polyethylene wear in total hip arthroplasty. J Biomech. 2002;35:323-30. (Pubitemid 34154867)
4. Saikko V, Shen M. Wear comparison between a dual mobility total hip prosthesis and a typical modular design using a hip joint simulator. Wear. 2010;268:617-21.
5. Wilches LV, Uribe JA, Toro A. Wear of materials used for artificial joints in total hip replacements. Wear. 2008;265:143-9. (Pubitemid 351442866)
6. Ilchmann T, Reimold M, Müller-Schauenburg W. Estimation of the wear volume after total hip replacement. A simple access to geometrical concepts. Med Eng Phys. 2008;30:373-9. (Pubitemid 351318286)
7. Barnes CL, DeBoer D, Corpe RS, Nambu S, Carroll M, Timmerman I. Wear performance of large-diameter differential-hardness hip bearings. J Arthroplast. 2008;23:56-60.
8. Affatato S, Bersaglia G, Rocchi M, Taddei P, Fagnano C, Toni A. Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions. Biomaterials. 2005;26:3259-67. (Pubitemid 39647259)
9. Korhonen RK, Koistinen A, Konttinen YT, Santavirta SS, Lappalainen R. The effect of geometry, abduction angle on the stresses in cemented UHMWPE acetabular cups-finite element simulations, experimental tests. BioMed Eng Online. 2005;4:32.
10. Rixrath E, Wendling-Mansuy S, Flecher X, Chabrand P, Argenson JN. Design parameters dependences on contact stress distribution in gait and jogging phases after total hip arthroplasty. J Biomech. 2008;41:1137-42.
11. Bertram T, Anton H, Johan K, Veronika K, Gunnar F, Nico V, Ron D. Association between contact hip stress and RSA-measured wear rates in total hip arthroplasties of 31 patients. J Biomech. 2008;41:100-5.
12. Jiang Hai B. Static and dynamic mechanics analysis on artificial hip joints with different interface designs by the finite element method. J Bionic Eng. 2007;4:123-31.
13. David B, Tarun G. Finite element analysis of hip stem designs. Mater Des. 2008;29:45-60.
14. Schmid DM, Wullschleger L, Derler S, Schmitt KU. Development of a new design of hip protectors using finite element analysis and mechanical tests. Med Eng Phys. 2008;30:1186-92.
15. Kang L, Galvin AL, Jin ZM, Fisher J. A simple fully integrated contact-coupled wear prediction for ultra-high molecular weight polyethylene hip implants: Proceedings of the Institution of Mechanical Engineers. Part H J Eng Med. 2006;220:33-46.
16. Griza S, Cê AN, Silva EP, Bertoni F, Reguly A, Strohaecker TR. Acetabular metal backed fatigue due to severe wear before revision. Eng Fail Anal. 2009;16:2036-42.
17. Wasielewski RC, Jacobs JJ, Arthurs B, Rubash HE. The acetabular insert-metal backing interface: an additional source of polyethylene wear debris. J Arthroplast. 2005;20:914-22. (Pubitemid 41463694)
18. Chen FS, Di Cesare PE, Kale AA, Lee JF, Frankel VH, Stuchin SA, Zuckerman JD. Results of cemented metal-backed acetabular components: a 10-year-average follow-up study. J Arthroplast. 1998;13:867-73. (Pubitemid 29016793)
19. Burger N D L, De Vaal PL, Meyer JP. Failure analysis on retrieved ultra high molecular weight polyethylene (UHMWPE) acetabular cups. Eng Fail Anal. 2007;14:1329-45. (Pubitemid 46682011)
20. John GB, Thomas KD, Paul AW, Ian CC. Surface damage after multiple dislocations of a 38-mm-diameter, metal-on-metal hip prosthesis. J Arthroplast. 2008;23:1090-6.
21. Alistair P D E, Richard MH, Ian MP, Anthony U. Wear in retrieved acetabular components: effect of femoral head radius and patient parameters. J Arthroplast. 1998;13:291-5.
22. Darwish SM, Al-Samhan AM. Optimization of artificial hip joint parameters. Mater Sci Eng Technol. 2009;40:218-23.
23. Cilingir AC. Finite element analysis of the contact mechanics of ceramic-on-ceramic hip resurfacing prostheses. J Bionic Eng. 2010;7:244-53.
24. Fouad H, Darwish SM. Effects of femur design parameters on the resultant contact stress on the UHMWPE Cup. In: 4th international conference on advanced computational engineering and experimenting. Paris; 2010.
25. ANSYS Version 12. ANSYS Inc., Canonsburg; 2009.
26. Barreto S, Folgado J, Fernandes PR, Monteiro J. The influence of the pelvic bone on the computational results of the acetabular component of a total hip prosthesis. J Biomech Eng. 2010;132(5):054503.
27. Muratoglu OK, Bragdon CR, O'Connor D, Perinchief RS, Estok DM 2nd, Jasty M, Harris WH. Larger diameter femoral heads used in conjunction with a highly cross-linked ultra-high molecular weight polyethylene: a new concept. J Arthroplast. 2001;16:24-30. (Pubitemid 33151043)
28. CATIA V5. Dassault Systemes, Mississauga; 2008.
29. Qingliang W, Jinlong L, Shirong G. Study on biotribological behavior of the combined joint of CoCrMo and UHMWPE/BHA composite in a hip joint simulator. J Bionic Eng. 2009;6:378-86.
30. Furmanski J, Anderson M, Bal S, Greenwald AS, Halley D, Penenberg B, Ries M, Pruitt L. Clinical fracture of cross-linked UHMWPE acetabular liners. Biomaterials. 2009;30:5572-82.
31. Fouad H. Experimental and numerical studies of the notch strengthening behaviour of semi-crystalline ultra-high molecular weight polyethylene. Mater Des. 2010;31:1117-29.
32. Mourad A-H I, Fouad H, Rabeh E. Impact of some environmental conditions on the tensile, creep-recovery, relaxation, melting and crystallinity behaviour of UHMWPE-GUR 410-medical grade. Mater Des. 2009;30:4112-9.
33. Fouad H, Mourad A-H I, Barton DC. Effect of pre-heat treatment on the static and dynamic thermo-mechanical properties of ultrahigh molecular weight polyethylene. Polym Testing. 2005;24:549-56. (Pubitemid 40715567)
34. Fouad H. Effect of long-term natural aging on the thermal, mechanical, and viscoelastic behavior of biomedical grade of ultra high molecular weight polyethylene. J Appl Polym Sci. 2010;118:17-24.
35. Hedia HS, Abdel-Shafi AA, Fouda N. Shape optimization of metal backing for cemented acetabular cups. Biomed Mater Eng. 2000;10:73-82.
36. Wu JS, Hung JP, Shu CS, Chen JH. The computer simulation of wear behavior appearing in total hip prosthesis. Comput Method Program Biomed. 2003;70:81-91. (Pubitemid 35452543)
37. Chen L, Du X, Zheng Y, Bao Y, Chen M, Hu M, Yu D. Finite element analysis of LTI carbon hip joint head. Bioinformatics Biomed Eng. ICBBE 3rd International Conference; 2009. 11-13 June. p. 1-4.
38. Kosak R, Antolic V, Pavlovcic V, Kralj-Iglic V, Milosev I, Vidmar G, Iglic A. Polyethylene wear in total hip prostheses: the influence of direction of linear wear on volumetric wear determined from radiographic data. Skeletal Radiol. 2003;32:679-86. (Pubitemid 37527082)
39. Currey JD. What determines the bending strength of compact bone? J Exp Biol. 1999;202:2495-503. (Pubitemid 29490142)