Wear comparison between a dual mobility total hip prosthesis and a typical modular design using a hip joint simulator

Wear

Volumn 268, Issue 3-4, 2010, Pages 617-621

  Saikko, Vesa ^a   Shen, Ming ^b  

^a AALTO UNIVERSITY   (Finland)

^b Zimmer GmbH   (Switzerland)

Author keywords

Abduction angle; Biotribology; Dual mobility insert; Hip joint simulator; Joint prostheses; UHMWPE

Indexed keywords

JOINT PROSTHESES; NONMETALLIC MATRIX COMPOSITES; SIMULATORS; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEAR OF MATERIALS; DESIGN;

ABDUCTION ANGLE; BIOTRIBOLOGY; DUAL MOBILITY INSERT; HIP JOINT SIMULATORS; INSERT MATERIALS; MODULAR DESIGNS; TOTAL HIP PROSTHESIS; WEAR BEHAVIOURS;

HIP PROSTHESES;

EID: 73149091204     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2009.10.011     Document Type: Article

References (15)

1. Phillippot R., Adam P., Farizon F., Fessy M.H., and Bousquet G. Survival of cementless dual mobility sockets: ten-year follow-up. Rev. Chir. Orthop. Reparatrice Appar. Mot. 92 (2006) 326-331
2. Saikko V. A 12-station, anatomic hip joint simulator. J. Eng. Med. 219 (2005) 437-448
3. Udomkiat P., Dorr L.D., and Wan Z. Cementless hemispheric porous-coated sockets implanted with press-fit technique without screws: average ten-year follow-up. J. Bone Joint Surg. 84-A (2002) 1195-1200
4. Wan Z., Boutary M., and Dorr L.D. The influence of acetabular component position on wear in total hip arthroplasty. J. Arthroplasty 23 (2008) 51-56
5. Adam P., Farizon F., and Fessy M.H. Dual articulation retentive acetabular liners and wear: surface analysis of 40 retrieved polyethylene implants. Rev. Chir. Orthop. Reparatrice Appar. Mot. 91 (2005) 627-636
6. Hall R., Unsworth A., Siney P., and Wroblewski B. Wear in retrieved Charnley acetabular sockets. J. Eng. Med. 210 (1996) 197-207
7. Atkinson J., Dowson D., Isaac G., and Wroblewski B. Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints II: a microscopical study of the surfaces of Charnley polyethylene acetabular sockets. Wear 104 (1985) 217-224
8. Woolson S.T., and Murphy M.G. Wear of the polyethylene of Harris-Galante acetabular components inserted without cement. J. Bone Joint Surg. 77-A (1995) 1311-1314
9. Del Schutte Jr. H., Lipman A.J., Bannar S.M., Livermore J.T., Ilstrup D., and Morrey B.F. Effects of acetabular abduction on cup wear rates in total hip arthroplasty. J. Arthroplasty 13 (1998) 621-626
10. D'Lima D.D., Yashar A.A., Venn-Watson E.J., Colwell Jr. C.W., and Walker R.H. The Harris-Galante Porous acetabular component at intermediate follow-up. Orthopedics 24 (2001) 747-751
11. Crowther J.D., and Lachiewicz P.F. Survival and polyethylene wear of porous-coated acetabular components in patients less than fifty years old: results at nine to fourteen years. J. Bone Joint Surg. 84-A (2002) 729-735
12. Goosen J.H., Verheyen C.C., and Tulp N.J. Mid-term wear characteristics of an uncemented acetabular component. J. Bone Joint Surg. 87-B (2005) 1475-1479
13. Liang B., Kawanabe K., Ise K., Iida H., and Nakamura T. Polyethylene wear against alumina and zirconia heads in cemented total hip arthroplasty. J. Arthroplasty 22 (2007) 251-257
14. Patel J., Scott J.E., and Radford W.J.P. Severe polyethylene wear in uncemented acetabular cup system components. J. Arthroplasty 14 (1999) 635-636
15. Puolakka T.J.S., Keränen J.T., Juhola K.A., Pajamäki K.J.J., Halonen P.J., Nevalainen J.K., Saikko V., Lehto M.U.K., and Järvinen M. Increased volumetric wear of polyethylene liners with more than 3 years of shelf-life time. Int. Orthop. 27 (2003) 153-159