Multiscale singularity analysis of cutting forces for micromilling tool-wear monitoring

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 6, 2011, Pages 2512-2521

  Kunpeng, Zhu ^a   Soon, Hong Geok ^a   San, Wong Yoke ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

Holder exponent (HE); micromilling; singularity spectrum; tool wear monitoring; wavelet transform modulus maxima (WTMM)

Indexed keywords

HOLDER EXPONENT (HE); MICROMILLING; SINGULARITY SPECTRUM; TOOL WEAR; WAVELET TRANSFORM MODULUS MAXIMA (WTMM);

CONDITION MONITORING; MICROMACHINING; MILLING (MACHINING); WAVELET TRANSFORMS;

WEAR OF MATERIALS;

EID: 79956260491     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2062476     Document Type: Review

References (44)

1. D. Dornfeld, S. Min, and Y. Takeuchi, "Recent advances in mechanical micromachining," Ann. CIRP, vol. 55, no. 2, pp. 745-768, 2006. (Pubitemid 46148815)
2. R. Dean, Jr. and A. Luque, "Applications of microelectromechanical systems in industrial processes and services," IEEE Trans. Ind. Electron., vol. 56, no. 4, pp. 913-925, Apr. 2009.
3. M. C. Shaw, Metal Cutting Principles, 2nd ed. New York: Oxford Univ. Press, 2005.
4. G. Byrne, D. Dornfeld, I. Inasaki, G. Ketteler, W. Konig, and R. Teti, "Tool condition monitoring (TCM)-The status of research and industrial application," Ann. CIRP, vol. 44, no. 2, pp. 541-567, 1995.
5. N. Ikawa, S. Shimada, and H. Tanaka, "Minimum thickness of cut in micro-machining," Nanotechnol., vol. 3, no. 1, pp. 6-9, Jan. 1992.
6. M. B. G. Jun, X. Liu, S. G. Kapoor, and R. E. DeVor, "Investigation of the dynamics of micro-end milling, Part 1: Model development," ASME J. Manuf. Sci. Eng., vol. 128, no. 4, pp. 893-900, Nov. 2006. (Pubitemid 44770135)
7. Y. Altintas and I. Yellowley, "The process detection of tool failure in milling using cutting force models," ASME J. Eng. Ind., vol. 111, no. 2, pp. 149-157, 1989.
8. Y.Wu and R. Du, "Feature extraction and assessment using wavelet packets for monitoring of machining process," Mech. Syst. Signal Process., vol. 10, no. 1, pp. 29-53, Jan. 1996. (Pubitemid 126349205)
9. R. Rahman, A. S. Kumar, and J. R. S. Prakash, "Micro-milling of pure copper," J. Mater. Process. Technol., vol. 116, no. 1, pp. 39-43, Oct. 2001.
10. A. Aramcharoen and P. T. Mativenga, "Size effect and tool geometry in micromilling of tool steel," Precis. Eng., vol. 33, no. 4, pp. 402-407, Oct. 2009.
11. C. D. Torres, P. J. Heaney, A. V. Sumant, M. A. Hamilton, R. W. Carpick, and F. E. Pfefferkorn, "Analyzing the performance of diamond-coated micro end mills," Int. J. Mach. Tools Manuf., vol. 49, no. 7/8, pp. 599-612, Jun. 2009.
12. M. P. Vogler, R. E. DeVor, and S. G. Kapoor, "On the modeling and analysis of machining performance in micro-endmilling, Part II: Cutting force prediction," ASME J. Manuf. Sci. Eng., vol. 126, no. 4, pp. 695-705, Nov. 2004.
13. M. T. Zaman, A. Senthil Kumar, M. Rahman, and S. Sreeram, "A threedimensional analytical cutting force model for micro end milling operation," Int. J. Mach. Tools Manuf., vol. 46, no. 3/4, pp. 353-366, Mar. 2006. (Pubitemid 41827908)
14. M. Malekian, S. S. Park, and M. B. G. Jun, "Modeling of dynamic micromilling cutting forces," Int. J. Mach. Tools Manuf., vol. 49, no. 7/8, pp. 586-598, Jun. 2009.
15. I. N. Tansel, T. T. Arkan, W. Y. Bao, N. Mahendrakar, B. Shisler, D. Smith, and M. McCool, "Tool wear estimation in micro-machining. Part I: Tool usage-cutting force relationship," Int. J. Mach. Tools Manuf., vol. 40, no. 4, pp. 599-608, Mar. 2000. (Pubitemid 30534404)
16. W. Y. Bao and I. N. Tansel, "Modeling micro-end-milling operations. Part III: Influence of tool wear," Int. J. Mach. Tools Manuf., vol. 40, no. 15, pp. 2193-2211, Dec. 2000.
17. I. N. Tansel, W. Y. Bao, N. S. Reen, and C. V. Kropas-Hughes, "Genetic tool monitor (GTM) for micro-end-milling operations," Int. J. Mach. Tools Manuf., vol. 45, no. 3, pp. 293-299, Mar. 2005.
18. K. P. Zhu, Y. S.Wong, and G. S. Hong, "Multi-categorymicro-milling tool wear monitoring with continuous hidden Markov models," Mech. Syst. Signal Process., vol. 23, no. 2, pp. 547-560, Feb. 2009.
19. A. N. Robertson, C. R. Farrar, and H. Sohn, "Singularity detection for structural health monitoring using holder exponents," Mech. Syst. Signal Process., vol. 17, no. 6, pp. 1163-1184, Nov. 2003.
20. W. Yang, P. J. Tavner, C. J. Crabtree, and M. Wilkinson, "Cost-effective condition monitoring for wind turbine," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 263-271, Jan. 2010.
21. S. Loutridis and A. Trochidis, "Classification of gear faults using Hoelder exponents," Mech. Syst. Signal Process., vol. 18, no. 5, pp. 1009-1030, Sep. 2004.
22. A. R. Mohanty and C. Kar, "Fault detection in a multistage gearbox by demodulation of motor current waveform," IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1285-1297, Jun. 2006. (Pubitemid 44263739)
23. Z. K. Peng, F. L. Chu, and P.W. Tse, "Singularity analysis of the vibration signals by means of wavelet modulus maximal method," Mech. Syst. Signal Process., vol. 21, no. 2, pp. 780-794, Feb. 2007. (Pubitemid 44667409)
24. A. Y. Goharrizi and N. Sepehri, "A wavelet-based approach to internal seal damage diagnosis in hydraulic actuators," IEEE Trans. Ind. Electron., vol. 57, no. 5, pp. 1755-1763, May 2010.
25. J. Cusido, L. Romeral, J. A. Ortega, J. A. Rosero, and A. Garcia Espinosa, "Fault detection in induction machines using power spectral density in wavelet decomposition," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 633-643, Feb. 2008. (Pubitemid 351344237)
26. M. Riera-Guasp, J. A. Antonino-Daviu, M. Pineda-Sanchez, R. Puche-Panadero, and J. Perez-Cruz, "A general approach for the transient detection of slip-dependent fault components based on the discrete wavelet transform," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4167-4180, Dec. 2008.
27. A. Ordaz-Moreno, R. de Jesus Romero-Troncoso, J. A. Vite-Frias, J. R. Rivera-Gillen, and A. Garcia-Perez, "Automatic online diagnosis algorithm for broken-bar detection on induction motors based on discrete wavelet transform for FPGA implementation," IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 2193-2202, May 2008. (Pubitemid 351728770)
28. X. Li, R. Du, B. Denkena, and J. Imiela, "Tool breakage monitoring using motor current signals for machine tools with linear motors," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1403-1408, Oct. 2005. (Pubitemid 41489384)
29. X. Li, A. Djordjevich, and P. K. Venuvinod, "Current-sensorbased feed cutting force intelligent estimation and tool wear condition monitoring," IEEE Trans. Ind. Electron., vol. 47, no. 3, pp. 697-702, Jun. 2000.
30. K. P. Zhu, Y. S.Wong, and G. S. Hong, "Wavelet analysis of sensor signals for tool condition monitoring: A review and some new results," Int. J. Mach. Tools Manuf., vol. 49, no. 7/8, pp. 537-553, Jun. 2009.
31. S. G. Mallat and W. L. Hwang, "Singularity detection and processing with wavelets," IEEE Trans. Inf. Theory, vol. 38, no. 2, pp. 617-643, Mar. 1992.
32. S. G. Mallat and S. Zhong, "Characterization of signals from multiscale edges," IEEE Trans. Pattern Anal. Mach. Intell., vol. 14, no. 7, pp. 710-732, Jul. 1992.
33. X. Chen and B. Li, "Acoustic emission method for tool condition monitoring based on wavelet analysis," Int. J. Adv. Manuf. Technol., vol. 33, no. 9/10, pp. 968-976, Jul. 2007. (Pubitemid 47142839)
34. S. Jaffard, "Oscillation spaces: Properties and applications to fractal and multifractal functions," J. Math. Phys., vol. 39, no. 8, pp. 4129-4141, Aug. 1998.
35. A. A. Kassim, Z. Mian, and M. A. Mannan, "Tool condition classification using Hidden Markov Model based on fractal analysis of machined surface textures," Mach. Vis. Appl., vol. 17, no. 5, pp. 327-336, Oct. 2006. (Pubitemid 44411274)
36. S. T. S. Bukkapatnam, S. R. T. Kumara, and A. Lakhtakia, "Fractal estimation of flank wear in turning," Trans. ASME, J. Dyn. Syst. Meas. Control, vol. 122, no. 1, pp. 89-94, Mar. 2000.
37. I. Daubechies, "The wavelet transformation, time-frequency localization and signal analysis," IEEE Trans. Inf. Theory, vol. 36, no. 5, pp. 961-1005, Sep. 1990. (Pubitemid 20738359)
38. S. G. Mallat, A Wavelet Tour of Signal Processing, 2nd ed. New York: Academic, 1999.
39. I. Yesilyurt, "End mill breakage detection using mean frequency analysis of scalogram," Int. J. Mach. Tools Manuf., vol. 46, no. 3/4, pp. 450-458, Mar. 2006. (Pubitemid 41827916)
40. S. Jaffard, "Multifractal formalism for functions Parts I," SIAM J. Math. Anal., vol. 28, no. 4, pp. 944-967, 1997.
41. S. Jaffard, "Multifractal formalism for functions Parts II," SIAM J. Math. Anal., vol. 28, no. 4, pp. 968-998, 1997.
42. E. Bacry, J. F. Muzy, and A. Arneodo, "Singularity spectrum of fractal signals: Exact results," J. Stat. Phys., vol. 70, no. 3/4, pp. 635-674, 1993.
43. K. P. Zhu, G. S. Hong, Y. S. Wong, and W. H. Wang, "Cutting force denoising in micro-milling tool condition monitoring," Int. J. Prod. Res., vol. 46, no. 16, pp. 4391-4408, Aug. 2008.
44. S. Theodoridis and K. Koutroumbas, Pattern Recognition. NewYork: Academic, 2003.