Void growth and coalescence in ductile solids with stage III and stage IV strain hardening

International Journal of Plasticity

Volumn 27, Issue 8, 2011, Pages 1203-1223

  Lecarme, L ^a   Tekoglu C ^a   Pardoen, T ^a  

^a UNIVERSITÉ CATHOLIQUE DE LOUVAIN   (Belgium)

Author keywords

Constitutive behaviour; Ductility; Strengthening mechanisms; Void coalescence; Voids and inclusions

Indexed keywords

AXISYMMETRIC FINITE ELEMENTS; CONSTITUTIVE BEHAVIOUR; DAMAGE MODEL; DISLOCATION SUBSTRUCTURES; DUCTILE DAMAGE MODELS; DUCTILE FAILURES; DUCTILE SOLIDS; FE CALCULATIONS; HARDENING LAWS; LARGE STRAINS; MATRIX MATERIALS; PARAMETRIC STUDY; PHYSICAL MECHANISM; PHYSICS-BASED; POROUS PLASTICITY; POWER LAW; STATE OF THE ART; STRAIN VALUES; STRENGTHENING MECHANISMS; TWO STAGE; UNIT CELLS; VOID COALESCENCE; VOID GROWTH AND COALESCENCE; VOID GROWTH RATE; VOID SHAPE; VOIDS AND INCLUSIONS;

DEFORMATION; DUCTILE FRACTURE; DUCTILITY; PLASTICITY; STRAIN HARDENING; STRESS-STRAIN CURVES;

COALESCENCE;

EID: 79956121938     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2011.01.004     Document Type: Article

References (76)

1. ABAQUS, 2008. Abaqus Theory Manual, Version 6.8. Providence, Rhode Island: Dassault Systmes.
2. A. Argon Strengthening Mechanisms in Crystal Plasticity 2008 Oxford University Press New York
3. A. Asserin-Lebert, J. Besson, and A. Gourgues Fracture of 6056 aluminum sheet materials: effect of specimen thickness and hardening behavior on strain localization and toughness Mater. Sci. Eng. A 395 1-2 2005 186 194 (Pubitemid 40345241)
4. H. Badreddine, K. Saanouni, and A. Dogui On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming Int. J. Plast. 26 11 2010 1541 1575
5. Benzerga, A.A., 2000. Rupture ductile des tôles anisotropes, simulation de la propagation longitudinale dans une tôle pressurisée. Ph.D. thesis, Ecole des Mines de Paris.
6. A.A. Benzerga, and J. Besson Plastic potentials for anisotropic porous solids Eur. J. Mech. A. Solids 20 3 2001 397 434 (Pubitemid 32512453)
7. A.A. Benzerga, and J.-B. Leblond Ductile fracture by void growth to coalescence Adv. Appl. Mech. 44 2010 169 305
8. A.A. Benzerga, J. Besson, and A. Pineau Anisotropic ductile fracture. Part II: theory Acta Mater. 52 15 2004 4639 4650
9. J. Besson Damage of ductile materials deforming under multiple plastic or viscoplastic mechanisms Int. J. Plast. 25 11 2009 2204 2221
10. J. Besson, and C. Guillemer-Neel An extension of the Green and Gurson models to kinematic hardening Mech. Mater. 35 1-2 2003 1 18 (Pubitemid 35282153)
11. U. Borg, C.F. Niordson, and J.W. Kysar Size effects on void growth in single crystals with distributed voids Int. J. Plast. 24 4 2008 688 701
12. W. Brocks, D.Z. Sun, and A. Hönig Verification of the transferability of micromechanical parameters by cell model calculations with visco-plastic materials Int. J. Plast. 11 8 1995 971 989
13. T. Byun, N. Hashimoto, and K. Farrell Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels Acta Mater. 52 13 2004 3889 3899
14. B. Chéhab, Y. Bréchet, M. Véron, P. Jacques, G. Parry, J.-D. Mithieux, J.-C. Glez, and T. Pardoen Micromechanics of high-temperature damage in dual-phase stainless steel Acta Mater. 58 2 2010 626 637
15. C.C. Chu, and A. Needleman Void nucleation effects in biaxially stretched sheets. J. Eng. Mater. Technol. 102 3 1980 249 256 (Pubitemid 11484651)
16. M. Delincé, Y. Bréchet, J. Embury, M. Geers, P. Jacques, and T. Pardoen Structure-property optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening model Acta Mater. 55 7 2007 2337 2350 (Pubitemid 46437451)
17. D. Fabrgue, and T. Pardoen A constitutive model for elastoplastic solids containing primary and secondary voids J. Mech. Phys. Solids 56 3 2008 719 741 (Pubitemid 351248897)
18. D. Fabrgue, and T. Pardoen Corrigendum to "A constitutive model for elastoplastic solids containing primary and secondary voids [J. Mech. Phys. Solids 56 (2008) 719-741] J. Mech. Phys. Solids 57 5 2009 869 870
19. J. Faleskog, and C.F. Shih Micromechanics of coalescence. I: synergistic effects of elasticity, plastic yielding and multi-size-scale voids J. Mech. Phys. Solids 45 1 1997 21 25
20. C. Gallais, A. Simar, D. Fabrgue, A. Denquin, G. Lapasset, B. de Meester, Y. Bréchet, and T. Pardoen Multiscale analysis of the strength and ductility of AA 6056 aluminum friction stir welds Metall. Mater. Trans. A 38A 5 2007 964 981 (Pubitemid 47007377)
21. X. Gao, J. Faleskog, C.F. Shih, and R.H. Dodds Ductile tearing in part-through cracks: experiments and cell-model predictions Eng. Fract. Mech. 59 6 1998 761 777 (Pubitemid 28392598)
22. J. Gil Sevillano, P. van Houtte, and E. Aernoudt Large strain work hardening and textures Prog. Mater Sci. 25 2-4 1980 69 412 (Pubitemid 12427529)
23. M. Gologanu, J.-B. Leblond, and J. Devaux Approximate models for ductile metals containing non-spherical voids - case of axisymmetric prolate ellipsoidal cavities J. Mech. Phys. Solids 41 1993 1723 1754
24. M. Gologanu, J.-B. Leblond, and J. Devaux Approximate models for ductile metals containing non-spherical voids - case of axisymmetric oblate ellipsoidal cavities J. Eng. Mat. Tech. 116 1994 290 297
25. M. Gologanu, J.-B. Leblond, G. Perrin, and J. Devaux Recent extensions of Gurson's model for porous ductile metals P. Suquet, Continuum Micromechanics 1997 Springer-Verlag New York 61 130
26. A.L. Gurson Continuum theory of ductile rupture by void nucleation and growth. I: Yield criteria and flow rules for porous ductile media J. Eng. Mater. Technol. 99 1 1977 2 15
27. A.L. Gurson Porous rigid-plastic materials containing rigid inclusions - Yield function, plastic potential, and void nucleation D.M.R. Taplin, Proceedings of International Conferefnce on Fracture vol. 2A 1977 Pergamon Press Oxford 357
28. G. Huber, Y. Bréchet, and T. Pardoen Predictive model for void nucleation and void growth controlled ductility in quasi-eutectic cast aluminium alloys Acta Mater. 53 9 2005 2739 2749 (Pubitemid 40556704)
29. S.M. Keralavarma, and A.A. Benzerga An approximate yield criterion for anisotropic porous media C.R. Mec. 336 9 2008 685 692
30. S. Keralavarma, and A. Benzerga A constitutive model for plastically anisotropic solids with non-spherical voids J. Mech. Phys. Solids 58 6 2010 874 901
31. H. Klöcker, and V. Tvergaard Growth and coalescence of non-spherical voids in metals deformed at elevated temperature Int. J. Mech. Sci. 45 8 2003 1283 1308
32. U.F. Kocks, and H. Mecking Physics and phenomenology of strain hardening: the FCC case Prog. Mater Sci. 48 3 2003 171 273
33. J. Koplik, and A. Needleman Void growth and coalescence in porous plastic solids Int. J. Solids Struct. 24 8 1988 835 853 (Pubitemid 18663826)
34. D. Lassance, F. Scheyvaerts, and T. Pardoen Growth and coalescence of penny-shaped voids in metallic alloys Eng. Fract. Mech. 73 8 2006 1009 1034 (Pubitemid 43240108)
35. D. Lassance, D. Fabrgue, F. Delannay, and T. Pardoen Micromechanics of room and high temperature fracture in 6xxx Al alloys Prog. Mater Sci. 52 1 2007 62 129 (Pubitemid 44540315)
36. J.-B. Leblond, and G. Mottet A theoretical approach of strain localization within thin planar bands in porous ductile materials C.R. Mec. 336 1-2 2008 176 189
37. J.-B. Leblond, G. Perrin, and J. Devaux An improved Gurson-type model for hardenable ductile metals Eur. J. Mech. A. Solids 14 4 1995 499 527
38. R.C. Lin, D. Steglich, W. Brocks, and J. Betten Performing RVE calculations under constant stress triaxiality for monotonous and cyclic loading Int. J. Numer. Methods Eng. 66 8 2006 1331 1360
39. F.A. McClintock A criterion for ductile fracture by the growth of holes J. Appl. Mech. 35 1968 363 371
40. M. Mear, and J. Hutchinson Influence of yield surface curvature on flow localization in dilatant plasticity Mech. Mater. 4 3-4 1985 395 407 (Pubitemid 16557484)
41. H. Mecking, and U. Kocks Kinetics of flow and strain-hardening Acta Metall. 29 11 1981 1865 1875
42. V. Monchiet, C. Gruescu, E. Charkaluk, and D. Kondo Approximate yield criteria for anisotropic metals with prolate or oblate voids C.R. Mec. 334 7 2006 431 439 (Pubitemid 44160564)
43. V. Monchiet, O. Cazacu, E. Charkaluk, and D. Kondo Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids Int. J. Plast. 24 7 2008 1158 1189 (Pubitemid 351626438)
44. S. Naamane, G. Monnet, and B. Devincre Low temperature deformation in iron studied with dislocation dynamics simulations Int. J. Plast. 26 1 2010 84 92
45. K. Nahshon, and J. Hutchinson Modification of the Gurson model for shear failure Eur. J. Mech. A. Solids 27 1 2008 1 17 (Pubitemid 350181489)
46. K. Nielsen, T. Pardoen, V. Tvergaard, B. de Meester, and A. Simar Modelling of plastic flow localization and damage development in friction stir welded 6005A aluminium alloy using physics based strain hardening law Int. J. Solids Struct. 47 18-19 2010 2359 2370
47. T. Pardoen Numerical simulation of low stress triaxiality ductile fracture Comput. Struct. 84 26-27 2006 1641 1650 (Pubitemid 44247104)
48. T. Pardoen, and Y. Brechet Influence of microstructure-driven strain localization on the ductile fracture of metallic alloys Philos. Mag. 84 3 2004 269 297
49. T. Pardoen, and F. Delannay Assessment of void growth models from porosity measurements in cold-drawn copper bars Metall. Mater. Trans. A 29 7 1998 1895 1909 (Pubitemid 128716914)
50. T. Pardoen, and J.W. Hutchinson An extended model for void growth and coalescence J. Mech. Phys. Solids 48 12 2000 2467 2512
51. T. Pardoen, and J.W. Hutchinson Micromechanics-based model for trends in toughness of ductile metals Acta Mater. 51 1 2003 133 148
52. T. Pardoen, I. Doghri, and F. Delannay Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars Acta Mater. 46 2 1998 541 552 (Pubitemid 128430059)
53. T. Pardoen, Y. Marchal, and F. Delannay Thickness dependence of cracking resistance in thin aluminium plates J. Mech. Phys. Solids 47 10 1999 2093 2123 (Pubitemid 30511240)
54. T. Pardoen, F. Hachez, B. Marchioni, P.H. Blyth, and A.G. Atkins Mode I fracture of sheet metal J. Mech. Phys. Solids 52 2 2004 423 452
55. E.F. Rauch Plastic behavior of metals at large strains: Experimental studies involving simple shear J. Eng. Mater. Technol. 131 1 2009 011107 011108
56. J.R. Rice, and D.M. Tracey On the ductile enlargement of voids in triaxial stress fields J. Mech. Phys. Solids 17 3 1969 201 217
57. F. Scheyvaerts, T. Pardoen, and P.R. Onck A new model for void coalescence by internal necking Int. J. Damage Mech. 19 1 2010 95 126
58. F. Scheyvaerts, P. Onck, C. Tekog̃lu, and T. Pardoen The growth and coalescence of voids under combined shear and tension J. Mech. Phys. Solids 59 2 2011 373 397
59. J. Segurado, and J. LLorca Discrete dislocation dynamics analysis of the effect of lattice orientation on void growth in single crystals Int. J. Plast. 26 6 2010 806 819
60. A. Simar, Y. Bréchet, B. de Meester, A. Denquin, and T. Pardoen Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6 Acta Mater. 55 18 2007 6133 6143 (Pubitemid 47539234)
61. A. Simar, K. Nielsen, B. de Meester, V. Tvergaard, and T. Pardoen Micro-mechanical modelling of ductile failure in 6005A aluminium using a physics based strain hardening law including stage IV Eng. Fract. Mech. 77 13 2010 2491 2503
62. O.P. Søvik, and C. Thaulow Growth of spheroidal voids in elastic-plastic solids Fatigue Fract. Eng. Mater. Struct. 20 12 1997 1731 1744 (Pubitemid 127556595)
63. D. Steglich, W. Brocks, J. Heerens, and T. Pardoen Anisotropic ductile fracture of Al 2024 alloys Eng. Fract. Mech. 75 12 2008 3692 3706 (Pubitemid 351688323)
64. C. Tekog̃lu, and T. Pardoen A micromechanics based damage model for composite materials Int. J. Plast. 26 4 2010 549 569
65. P. Thomason A three-dimensional model for ductile fracture by the growth and coalescence of microvoids Acta Metall. 33 6 1985 1087 1095 (Pubitemid 15565266)
66. P. Thomason Ductile Fracture of Metals 1990 Pergamon press
67. V. Tvergaard Influence of voids on shear band instabilities under plane strain conditions Int. J. Fract. 17 4 1981 389 407 (Pubitemid 12441659)
68. V. Tvergaard On localization in ductile materials containing spherical voids Int. J. Fract. 18 4 1982 237 252 (Pubitemid 12521713)
69. V. Tvergaard, and J.W. Hutchinson Two mechanisms of ductile fracture: void by void growth versus multiple void interaction Int. J. Solids Struct. 39 13-14 2002 3581 3597 (Pubitemid 34801321)
70. V. Tvergaard, and A. Needleman Analysis of the cup-cone fracture in a round tensile bar Acta Metall. 32 1 1984 157 169 (Pubitemid 14509228)
71. E. Voce A practical strain-hardening function Metallurgia 51 1955 219 226
72. J. Wen, Y. Huang, K.C. Hwang, C. Liu, and M. Li The modified Gurson model accounting for the void size effect Int. J. Plast. 21 2 2005 381 395
73. M.J. Worswick, and R.J. Pick Void growth and constitutive softening in a periodically voided solid J. Mech. Phys. Solids 38 5 1990 601 625
74. S. Yerra, C. Tekog̃lu, F. Scheyvaerts, L. Delannay, P. Van Houtte, and T. Pardoen Void growth and coalescence in single crystals Int. J. Solids Struct. 47 7-8 2010 1016 1029
75. M. Zehetbauer, and V. Seumer Cold work hardening in stages IV and V of F. C.C. metals. I: Experiments and interpretation Acta Metall. Mater. 41 2 1993 577 588 (Pubitemid 23613253)
76. Z.L. Zhang, and E. Niemi A new failure criterion for the Gurson-Tvergaard dilational constitutive model Int. J. Fract. 70 4 1995 321 334