A micromechanics based damage model for composite materials

International Journal of Plasticity

Volumn 26, Issue 4, 2010, Pages 549-569

  Tekoglu C ^a   Pardoen, T ^a  

^a UNIVERSITÉ CATHOLIQUE DE LOUVAIN   (Belgium)

Author keywords

Aluminum alloys; Ductile fracture; Mean field homogenization; Voids and inclusions

Indexed keywords

AXISYMMETRIC FINITE ELEMENTS; CAST ALUMINUM ALLOY; COMPLEX-COUPLING; CONSTITUTIVE BEHAVIORS; DAMAGE MODEL; DAMAGE NUCLEATION; DE-COHESION; ELASTIC PARTICLES; ELASTO-PLASTIC; FRACTURE STRAIN; HOMOGENIZATION SCHEME; LOAD TRANSFER; MEAN-FIELD; MULTIPHASE MATERIALS; PARAMETRIC STUDY; PLASTIC LOCALIZATION; PREDICTIVE CAPACITY; SECOND PHASE PARTICLES; STRESS/STRAIN; VOID NUCLEATION; VOIDS AND INCLUSIONS;

ALUMINUM; ALUMINUM ALLOYS; COMPOSITE MATERIALS; COMPOSITE MICROMECHANICS; NUCLEATION; REINFORCEMENT; STRESS-STRAIN CURVES;

DUCTILE FRACTURE;

EID: 77649235962     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2009.09.002     Document Type: Article

References (97)

1. Aravas N., and Ponte Castañeda P. Numerical methods for porous metals with deformation-induced anisotropy. Comput. Methods Appl. Mech. Eng. 193 (2004) 3767-3805
2. Argon A.S., Im J., and Safog̃lu R. Cavity formation from inclusions in ductile fracture. Metall. Trans. A 6 (1975) 825-837
3. Babout L., Bréchet Y., Maire E., and Fougères R. On the competition between particle fracture and particle decohesion in metal matrix composites. Acta Mater. 52 (2004) 4517-4525
4. Bansal Y., and Pindera M.J. Finite-volume direct averaging micromechanics of heterogeneous materials with elasticplastic phases. Int. J. Plast. 22 (2006) 775-825
5. Becker R. The effect of porosity distribution on ductile failure. J. Mech. Phys. Solids 35 (1987) 577-599
6. Benveniste Y. A new approach to the application of Mori-Tanaka's theory in composite materials. Mech. Mater. 6 (1987) 147-157
7. Benzerga A.A. Micromechanics of coalescence in ductile fracture. J. Mech. Phys. Solids 50 (2002) 1331-1362
8. Benzerga A.A., Besson J., and Pineau A. Anisotropic ductile fracture - part II: theory. Acta Mater. 52 (2004) 4639-4650
9. Berdin, C., 2004. Damage evolution laws and fracture criteria. In: Besson, J. (Ed.), Local Approach to Fracture, Les Presses de l'Ecole des Mines de Paris, pp. 147-171 (Chapter XII).
10. Beremin F.M. Cavity formation from inclusions in ductile fracture of A508 steel. Metall. Trans. A 12 (1981) 723-731
11. Berveiller M., and Zaoui A. An extension of the self-consistent scheme to plastically flowing polycrystals. J. Mech. Phys. Solids 26 (1979) 325-340
12. Besson J., Devillers-Guerville L., and Pineau A. Modeling of scatter and size effect in ductile fracture: application to thermal embrittlement of duplex stainless steels. Eng. Fract. Mech. 67 (2000) 169-190
13. Besson J., Steglich D., and Brocks W. Modeling of plane strain ductile rupture. Int. J. Plast. 19 (2003) 1517-1541
14. Besson, J., 2009a. Continuum models of ductile fracture: a review. Int. J. Damage Mech. (in press). doi:10.1177/1056789509103482.
15. Besson, J., 2009b. Damage of ductile materials deforming under multiple plastic or viscoplastic mechanisms. Int. J. Plast. (in press). doi:10.1016/j.ijplas.2009.03.001.
16. Bhattacharjee A., Varma V.K., Kamat S.V., Gogia A.K., and Bhargava S. Influence of β grain size on tensile behavior and ductile fracture toughness of titanium alloy Ti-10V-2Fe-3Al. Metall. Mater. Trans. A 37 (2006) 1423-1433
17. Borg U., Niordson C.F., Fleck N.A., and Tvergaard V. A viscoplastic strain gradient analyses of materials with voids or inclusions. Int. J. Solids Struct. 43 (2006) 4906-4916
18. Bornert M., Bretheau T., and Gilormini P. Homogénéisation en mécanique des matériaux, 1. Matériaux aléatoires élastiques et milieux périodiques (2001), HERMES Science, Paris
19. Brocks W., Sun D.-Z., and Hönig A. Verification of the transferability of micromechanical parameters by cell model calculations with viscoplastic materials. Int. J. Plast. 11 (1995) 971-989
20. Brown L.M., and Stobbs W.M. The work hardening of copper-silica. I. A model based on internal stresses, with no plastic relaxation. Philos. Mag. 23 (1971) 1185-1199
21. Chu C., and Needleman A. Void nucleation effects in biaxially stretched sheets. J. Eng. Mater. Technol. 102 (1980) 249-256
22. Delannay L., Lani F., Pardoen T., and Delannay F. Mean field modeling of the plastic behaviour of co-continuous dual-phase alloys with strong morphological anisotropy. Int. J. Plast. 22 (2006) 2327-2345
23. Delannay L., Jacques P., and Pardoen T. Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach. Int. J. Solids Struct. 45 (2008) 1825-1843
24. Doghri I. Mechanics of Deformable Solids: Linear and Nonlinear, Analytical and Computational Aspects (2000), Springer-Verlag, Berlin
25. Doghri I., and Friebel C. Effective elasto-plastic properties of inclusion-reinforced composites study of shape, orientation and cyclic response. Mech. Mater. 37 (2005) 45-68
26. Doghri I., and Ouaar A. Homogenization of two-phase elasto-plastic composite materials and structures - study of tangent operators, cyclic plasticity and numerical algorithms. Int. J. Solids Struct. 40 (2003) 1681-1712
27. Doghri I., and Tinel L. Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers. Int. J. Plast. 21 (2005) 1919-1940
28. Eshelby J.D. The determination of the elastic field of an ellipsoidal inclusion and related problems. Proc. Roy. Soc. Lond. A 241 (1957) 376-396
29. Fabrègue D., and Pardoen P. A constitutive model for elastoplastic solids containing primary and secondary voids. J. Mech. Phys. Solids 56 (2008) 719-741
30. Fleck N.A., Hutchinson J.W., and Tvergaard V. Softening by void nucleation and growth in tension and shear. J. Mech. Phys. Solids 37 (1989) 515-540
31. Gao, X., Zhang, T., Hayden, M., Roe, C., 2009. Effects of the stress state on plasticity and ductile failure of an aluminum 5083 alloy. Int. J. Plast. (in press). doi:10.1016/j.ijplas.2009.03.006.
32. Gologanu M., Leblond J.-B., and Devaux J. Approximate models for ductile metals containing non-spherical voids - case of axisymmetric prolate ellipsoidal cavities. J. Mech. Phys. Solids 41 (1993) 1723-1754
33. Gologanu M., Leblond J.-B., and Devaux J. Approximate models for ductile metals containing non-spherical voids - case of axisymmetric oblate ellipsoidal cavities. J. Eng. Mater. Technol. 116 (1994) 290-297
34. Gologanu M., Leblond J.-B., Perrin G., and Devaux J. Recent extensions of Gurson's model for porous ductile metals. In: Suquet P. (Ed). Continuum Micromechanics (1997), Springer-Verlag, New York 61-130
35. Gologanu M., Leblond J.-B., Gilles P., and Devaux J. Theoretical models for void coalescence in porous ductile solids. I: coalescence in layers. Int. J. Solids Struct. 38 (2001) 5581-5594
36. Gurson A. Continuum theory of ductile rupture by void nucleation and growth: part I - yield criteria and flow rules for porous ductile media. J. Eng. Mater. Technol. 99 (1977) 2-15
37. Hancock J.W., and Mackenzie A.C. On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-states. J. Mech. Phys. Solids 24 (1976) 147-160
38. Huber G., Bréchet Y., and Pardoen T. Predictive model for void nucleation and void growth controlled ductility in quasi-eutectic cast aluminium alloys. Acta Mater. 53 (2005) 2739-2749
39. Huespe, A.E., Needleman, A., Oliver, J., Sánchez, P.J., 2009. A finite thickness band method for ductile fracture analysis. Int. J. Plast. (in press). doi:10.1016/j.ijplas.2009.03.005.
40. Jacques P.J., Furnémont Q., Godet S., Pardoen T., Conlon K.T., and Delannay F. Micromechanical characterisation of TRIP-assisted multiphase steels by in situ neutron diffraction. Philos. Mag. 86 (2006) 2371-2392
41. Jun S., Zengjie D., Zhonghua L., and Mingjing T. Fracture strength of spheroidal carbide particle. Int. J. Fract. 42 (1990) 39-42
42. Khatam H., and Pindera M.-J. Parametric finite-volume micromechanics of periodic materials with elastoplastic phases. Int. J. Plast. 25 (2009) 1386-1411
43. Kocks U.F., and Mecking H. The physics and phenomenology of strain hardening. Prog. Mater. Sci. 48 (2003) 171-273
44. Koplik J., and Needleman A. Void growth and coalescence in porous plastic solids. Int. J. Solids Struct. 24 (1988) 835-853
45. Lacroix G., Pardoen T., and Jacques P.J. The fracture toughness of TRIP-assisted multiphase steels. Acta Mater. 56 (2008) 3900-3913
46. Landis C.M., and McMeeking R.M. Stress concentrations in composites with interface sliding, matrix stiffness, and uneven fiber spacing using shear lag theory. Int. J. Solids Struct. 36 (1999) 4333-4361
47. Landis C.M., Beyerlein I.J., and McMeeking R.M. Micromechanical simulation of the failure of fiber reinforced composites. J. Mech. Phys. Solids 48 (2000) 621-648
48. Lassance D., Scheyvaerts F., and Pardoen T. Growth and coalescence of penny-shaped voids in metallic alloys. Eng. Fract. Mech. 73 (2006) 1009-1034
49. Lassance D., Fabrègue D., Delannay F., and Pardoen T. Micromechanics of room and high temperature fracture in 6xxx Al alloys. Prog. Mater. Sci. 52 (2007) 62-129
50. Leblond J.-B., and Mottet G. A theoretical approach of strain localization within thin planar bands in porous ductile materials. C.R. Mec. 336 (2008) 176-189
51. Li Y., and Karr D.G. Prediction of ductile fracture in tension by bifurcation, localization, and imperfection analyses. Int. J. Plast. 25 (2009) 1128-1153
52. LLorca J., and Segurado J. Three-dimensional multiparticle cell simulations of deformation and damage in sphere-reinforced composites. Mater. Sci. Eng. A 365 (2004) 267-274
53. Lopez-Pamies O., and Ponte Castañeda P. Second-order homogenization estimates incorporating field fluctuations in finite elasticity. Math. Mech. Solids 9 (2004) 243-270
54. Maire E., Bouaziz O., Michiel M.D., and Verdu C. Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography. Acta Mater. 56 (2008) 4954-4964
55. Marini B., Mudry F., and Pineau A. Experimental study of cavity growth in ductile rupture. Eng. Fract. Mech. 22 (1985) 989-996
56. McClintock F.A. A criterion for ductile fracture by the growth of holes. J. Appl. Mech. 35 (1968) 363-371
57. Mercier S., and Molinari A. Homogenization of elastic-viscoplastic heterogeneous materials: self-consistent and Mori-Tanaka schemes. Int. J. Plast. 25 (2009) 1024-1048
58. Monchiet V., Cazacu O., Charkaluk E., and Kondo D. Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids. Int. J. Plast. 24 (2008) 1158-1189
59. Montheillet, F., Moussy, F., 1986. Physique et Mécanique de l'Endommagement. GRECO, Les Editions de Physique, les Ulis, France.
60. Mori T., and Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 21 (1973) 571-574
61. Mura T. Micromechanics of Defects in Solids (1991), Kluwer Academic Publishers, Dordrecht, The Neherlands
62. Nahshon K., and Hutchinson J.W. Modification of the Gurson model for shear failure. Eur. J. Mech. A/Solids 27 (2008) 1-17
63. Needleman A. A continuum model for void nucleation by inclusion debonding. J. Appl. Mech. 54 (1987) 525-531
64. Nemat-Nasser S., and Hori M. Micromechanics: Overall Properties of Heterogeneous Materials (1999), North-Holland, Amsterdam
65. Nielsen, K.L., Pardoen, T., de Meester, B., Tvergaard, V., Simar, A., submitted for publication. Micro-mechanical modelling of damage in 6005A aluminium based on a physical strain hardening law including stage IV.
66. Pardoen T. Numerical simulation of low stress triaxiality ductile fracture. Comput. Struct. 84 (2006) 1641-1650
67. Pardoen T., and Bréchet Y. Influence of microstructure-driven strain localization on the ductile fracture of metallic alloys. Philos. Mag. 84 (2004) 269-297
68. Pardoen T., and Delannay F. Assessment of void growth models from porosity measurements in cold drawn copper bars. Metall. Mater. Trans. A 29 (1998) 1895-1909
69. Pardoen T., and Delannay F. The coalescence of voids in prestrained notched round copper bars. Fatigue Fract. Eng. Mater. Struct. 21 (1998) 1459-1472
70. Pardoen T., and Hutchinson J.W. An extended model for void growth and coalescence. J. Mech. Phys. Solids 48 (2000) 2467-2512
71. Pardoen T., and Hutchinson J.W. Micromechanics-based model for trends in toughness of ductile metals. Acta Mater. 51 (2003) 133-148
72. Pardoen T., Doghri I., and Delannay F. Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars. Acta Mater. 46 (1998) 541-552
73. Peirce D., Shih C.F., and Needleman A. A tangent modulus method for rate dependent solids. Comput. Struct. 18 (1984) 875-887
74. Pierard O., and Doghri I. A study of various estimates of the macroscopic tangent operator in the incremental homogenization of elasto-plastic composites. Int. J. Multiscale Comput. Eng. 4 (2006) 521-543
75. Pineau, A., Pardoen, T., 2007. Failure mechanisms of metals. In: Comprehensive Structural Integrity Encyclopedia, vol. 6. Elsevier (Chapter 6).
76. Ponte Castañeda P. The effective mechanical properties of nonlinear isotropic composites. J. Mech. Phys. Solids 39 (1991) 45-71
77. Ponte Castañeda P., and Tiberio E. A second-order homogenization method in finite elasticity and applications to black-filled elastomers. J. Mech. Phys. Solids 48 (2000) 1389-1411
78. Rice J.R., and Tracey D.M. On the ductile enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 17 (1969) 201-217
79. Scheyvaerts, F., Pardoen, T., Onck, P.R., 2009. A new model for void coalescence by internal necking. Int. J. Damage Mech. (in press). doi:10.1177/1056789508101918.
80. Scheyvaerts, F., Pardoen, T., Onck, P.R., submitted for publication. The growth and coalescence of voids under combined shear and tension.
81. Simar A., Bréchet Y., de Meester B., Denquin A., and Pardoen T. Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6. Acta Mater. 55 (2007) 6133-6143
82. Siruguet K., and Leblond J.-B. Effect of void locking by inclusions upon the plastic behavior of porous ductile solids - part II: theoretical modeling and numerical study of void coalescence. Int. J. Plast. 20 (2004) 255-268
83. Steglich D., Brocks W., Heerens J., and Pardoen T. Anisotropic ductile fracture of al 2024 alloys. Eng. Fract. Mech. 75 (2008) 3692-3706
84. Sun X., Choi K.S., Liu W.N., and Khaleel M.A. Predicting failure modes and ductility of dual phase steels using plastic strain localization. Int. J. Plast. 25 (2009) 1888-1909
85. Tan H., Huang Y., Liu C., Ravichandran G., Inglis H.M., and Geubelle P.H. The uniaxial tension of particulate composite materials with nonlinear interface debonding. Int. J. Solids Struct. 44 (2007) 1809-1822
86. Tekog̃lu, C., Pardoen, T., 2009. A micromechanics based model for ductile damage in multiphase and composite metallic alloys combining extended Gurson and homogenization theories. In: Proceedings of the 12th International Conference on Fracture. Ottawa, Canada.
87. Thomason P.F. Ductile Fracture of Metals (1990), Pergamon Press, Oxford, England
88. Thompson A.V., and Williams J.C. Nuclei for ductile fracture in titanium. In: Taplin M.D.R. (Ed). Proceedings of the 4th International Conference on Fracture vol. 2 (1977), Pergamon Press, Oxford 343-348
89. Tvergaard V. Material failure by void growth to coalescence. Adv. Appl. Mech. 27 (1990) 83-151
90. Tvergaard V. Model studies of fibre breakage and debonding in a metal reinforced by short fibers. J. Mech. Phys. Solids 41 (1993) 1309-1326
91. Tvergaard V. Predictions of mixed mode interface crack growth using a cohesive zone model for ductile fracture. J. Mech. Phys. Solids 52 (2004) 925-940
92. Tvergaard V., and Needleman A. Analysis of the cup and cone fracture in a round tensile bar. Acta Metall. 32 (1984) 157-169
93. Van Hoof, T., 2007. Multi-level homogenization schemes for the constitutive modeling of multiphase materials including damage, internal report, CENAERO, Belgium.
94. Van Hoof, T., Lani, F., in preparation. A micromechanical model for ductile fracture in multiphase materials with large volume fraction of voids.
95. Worswick M.J., Chen Z.T., Pilkey A.K., Lloyd D., and Court S. Damage characterization and damage percolation modelling in aluminum alloy sheet. Acta Metall. 49 (2001) 2791-2803
96. Wu P.D., Embury J.D., Lloyd D.J., Huang Y., and Neale K.W. Effects of superimposed hydrostatic pressure on sheet metal formability. Int. J. Plast. 25 (2009) 1711-1725
97. Zhang W., Xu Z., Wang T.J., and Chen X. Effect of inner gas pressure on the elastoplastic behavior of porous materials: a second-order moment micromechanics model. Int. J. Plast. 25 (2009) 1231-1252