A new model for void coalescence by internal necking

International Journal of Damage Mechanics

Volumn 19, Issue 1, 2010, Pages 95-126

  Scheyvaerts, F ^a   Pardoen, T ^a   Onck, P R ^b  

^a UNIVERSITÉ CATHOLIQUE DE LOUVAIN   (Belgium)

^b UNIVERSITY OF GRONINGEN   (Netherlands)

Author keywords

Ductile fracture; Metals; Micromechanics; Void coalescence

Indexed keywords

DAMAGED MATERIALS; FINITE ELEMENT; HIGH STRESS; LOAD CARRYING CAPACITIES; MATERIAL FAILURES; MICROMECHANICAL MODEL; NEW MODEL; STRAIN INCREMENTS; UNLOADING SLOPE; VOID COALESCENCE;

COALESCENCE; MICROMECHANICS; UNLOADING;

DUCTILE FRACTURE;

EID: 76649130196     PISSN: 10567895     EISSN: 15307921     Source Type: Journal    
DOI: 10.1177/1056789508101918     Document Type: Article

References (65)

1. ABAQUS/Standard version 6.5. Userĝ€™s Manual. Hibbit, Karlsson & Sorensen, Inc. Providence, R.I., U.S. 2004.
2. Becker, R. (1987). On the Competition Between Particle Fracture and Particle Decohesion in Metal Matrix Composites, J. Mech. Phys. Solids, 35: 577-599.
3. Becker, R., Needleman, A., Richmond, O. and Tvergaard, V. (1988). Void Growth and Failure in Notched Bars, J. Mech. Phys. Solids, 36: 317-351.
4. Becker, R., Smelser, E., Richmond, O. and Appleby, E. (1989). The Effect of Void Shape on Void Growth and Ductility in Axisymmetric Tension Tests, Met. Trans. A, 20: 853-861.
5. Benzerga, A.A. (2000). Rupture Ductile Des Tôles Anisotropes: Simulation de la Propagation Longitudinale Dans un tube Pressurisé, PhD Thesis, Ecole Nationale Supérieure des Mines de Paris.
6. Benzerga, A.A. (2002). Micromechanics of Coalescence in Ductile Fracture, J. Mech. Phys. Solids, 50: 1331-1362.
7. Benzerga, A.A., Besson, J. and Pineau, A. (1999). Coalescence-controlled Anisotropic Ductile Fracture, J. Engng Mater. Techn., Transactions of the ASME, 121: 221-229.
8. Benzerga, A.A., Besson, J. and Pineau, A. (2004 a). Anisotropic Ductile Fracture - Part I: Experiments, Acta. Mater., 52: 4623-4638.
9. Benzerga, A.A., Besson, J. and Pineau, A. (2004 b). Anisotropic Ductile Fracture - Part II: theory, Acta. Mater., 52: 4639-4650.
10. Besson, J., Steglich, D. and Brocks, W. (2003). Modeling of Plane Strain Ductile Rupture, Int. J. Plasticity., 19: 1517-1541.
11. Brocks, W., Sun, D.Z. and H¶nig, A. (1995). Verification of the Transferability of Micromechanical Parameters by Cell Model Calculations with Visco-plastic Materials, Int. J. Plast, 11: 971-989.
12. Brown, L.M. and Embury, J.D. (1973). In: Proceedings of the Third International Conference on the Strength of Metals and Alloys, ICSMA 3, Cambridge, England, pp. 164-169.
13. Enakoutsa, K., Leblond, J.-B. and Audoly, B. (2005). In: Proceedings of the 11th International Conference on Fracture, In: Carpinteri, A. (ed.), March 20-25, Turin, Italy, CD-Rom.
14. d'Escatha, Y. and Devaux, J.C. (1979). In: Landes, J.D., Begley, J.A. and Clarke, G.A. (eds), Elastic-Plastic Fracture. American Society for Testing and Materials, Philadelphia, pp. 229-248 (ASTM STP 668).
15. Fabrégue, D. and Pardoen, T. (2008). A Constitutive Model for Elastoplastic Solids Containing Primary and Secondary Voids, J. Mech. Phys. Solids., 56: 719-741.
16. Gao, X., Faleskog, J. and Shih, C.F. (1998). Cell Model for Nonlinear Fracture Analysis - II. Fracture-process Calibration and Verification, Int. J. Fract., 89: 374-386.
17. Gologanu, M., Leblond, J.-B., Perrin, G. et al. (2001). Theoretical Models for Void Coalescence in Porous Ductile Solids. I. Coalescence "In Layers", Int. J. Solids Struct., 38: 5581-5594. (Pubitemid 32602504)
18. Gologanu, M., Leblond, J.-B., Perrin, G. and Devaux, J. (1997). Recent Extensions of Gursong's Model for Porous Ductile Metals, In: Suquet, P. (ed.), Continuum Micromechanics, Berlin, Springer-Verlag, Vol. 61.
19. Gologanu, M., Leblond, J.-B. And Devaux, J. (1994). Approximate Models for Ductile Metals Containing Non-spherical Voids - Case of Axisymmetric Oblate Ellipsoidal Cavities. ASME, J. Eng. Mater. Technol., 116: 290-297.
20. Gologanu, M., Leblond, J.-B. and Devaux, J. (1993). Approximate Models for Ductile Metals Containing Non Spherical Voids - Case of Axisymmetric Prolate Ellipsoidal Cavities, J. Mech. Phys. Solids, 41: 1723-1754.
21. Gullerud, A.S., Gao, X., Dodds Jr, R.H. and Haj-Ali, R. (2000). Simulation of Ductile Crack Growth using Computational Cells: numerical Aspects, Eng. Fract. Mech., 66: 65-92.
22. Gurson, A.L. (1977). Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I - Yield Criteria and Flow Rules for Porous Ductile Media, J. Engng Mater. Tech., 99: 2-15.
23. Huber, G., Brechet, Y. and Pardoen, T. (2005). Void Growth and Void Nucleation Controlled Ductility in Quasi Eutectic Cast Aluminium Alloys, Acta. Mater, 53: 2739-2749.
24. Hom, C.L. and McMeeking, R.M. (1989). Three-dimensional Void Growth Before a Blunting Crack Tip, J. Mech. Phys. Solids, 37: 395-415.
25. Koplik, J. and Needleman, A. (1988). Void Growth and Coalescence in Porous Plastic Solids, Int. J. Solids Struct., 24: 835-853.
26. Lassance, D., Fabrègue, D., Delannay, F. and Pardoen, T. (2007). Micromechanics of Room and High Temperature Fracture in 6xxx Al Alloys, Progress. Mater. Sci., 52: 62-129.
27. Lassance, D., Scheyvaerts, F. and Pardoen, T. (2006). Growth and Coalescence of Penny-shaped Voids in Metallic Alloys, Engng Fract. Mech, 73: 1009-1034.
28. Leblond, J.-B., Perrin, G. and Suquet, P. (1994). Exact Results and Approximate Models for Porous Viscoplastic Solids, Int. J. Plast, 10: 213-235.
29. Leblond, J.-B., Perrin, G. and Devaux, J. (1995). An Improved Gurson-type Model for Hardenable Ductile Metals, Eur. J. Mech. A/Solids, 14: 499-527.
30. Marini, B., Mudry, F. and Pineau, A. (1985). Ductile Rupture of A508 Steel under Nonradial Loading, Eng. Fract. Mech, 6: 989-996.
31. McClintock, F.A. (1968 a). A Criterion for Ductile Fracture by the Growth of Holes, J. Appl. Mech., 35: 353-371.
32. McClintock, F.A. (1968 b). Local Criteria for Ductile Fracture, Int. J. Fract., 4: 103-130.
33. McClintock, F.A. (1971). Fracture - an Advanced Treatise, In: Liebowitz, H. (ed.), Academic Press, New York, Vol. 3, pp. 47-225.
34. Mear, M. and Hutchinson, J.W. (1985). Influence of Yield Surface Curvature on Flow Localization in Dilatant Plasticity, Mech. Mater, 4: 395-407.
35. Mudry, F. (1982). Etude de la Rupture Ductile et de la Rupture par Clivage d'aciers Faiblement Allies, Thése d'Etat, Université de Technologie de Compiégne, France.
36. Needleman, A. and Tvergaard, V. (1984). An Analysis of Ductile Rupture in Notched Bars, J. Mech. Phys. Solids, 32: 461-490.
37. Pardoen, T., Doghri, I. and Delannay, F. (1998). Experimental and Numerical Comparison of Void Growth Models and Void Coalescence Criteria for the Prediction of Ductile Fracture in Copper Bars, Acta. Materialia., 46: 541-552.
38. Pardoen, T. and Delannay, F. (1998 a). Assessment of Void Growth Models from Porosity Measurements in Cold Drawn Copper Bars, Metall. Mater. Trans. A, 29A: 1895-1909.
39. Pardoen, T. and Delannay, F. (1998 b). On the Coalescence of Voids in Prestrained Notched Round Copper Bars, Fatigue. Fract. Engng Mater. Structures, 21: 1459-1472.
40. Pardoen, T. and Hutchinson, J.W. (2000). An Extended Model for Void Growth and Coalescence, J. Mech. Phys. Solids, 48: 2467-2512.
41. Pardoen, T. and Hutchinson, J.W. (2003). Micromechanics-based Model for Trends in Toughness of Ductile Metals, Acta. Mater., 51: 133-148.
42. Pardoen, T., Dumont, D., Deschamps, A. and Brechet, Y. (2003). Grain Boundary Versus Transgranular Ductile Failure, J. Mech. Phys. Solids, 51: 637-665.
43. Pardoen, T., Hachez, F., Marchioni, B., Blyth, H. and Atkins, A.G. (2004). Mode I Fracture of Sheet Metal, J. Mech. Phys. Solids, 52: 423-452.
44. Pardoen, T. (2006). Numerical Simulation of Low Stress Triaxiality Ductile Fracture, Computers & Structures, 84: 1641-1650.
45. Pardoen, T. and Pineau, A. (2007). Failure Mechanisms of Metals, Comprehensive Structural Integrity Encyclopedia, Elsevier, Volume 2, Chapter 6.
46. Perrin, G. and Leblond, J.-B. (2000). Accelerated Void Growth in Porous Ductile Solids Containing Two Populations of Cavities, Int. J. Plasticity, 16: 91-120.
47. Ragab, A.R. (2004). Application of an Extended Void Growth Model with Strain Hardening and Void Shape Evolution to Ductile Fracture under Axisymmetric Tension, Engng Fract. Mech, 71: 1515-1534.
48. Richelsen, A.B. and Tvergaard, V. (1994). Dilatant Plasticity or Upper Bound Estimates for Porous Ductile Solids, Acta. Metall. et. Mater, 42: 2561-2577.
49. Ruggieri, C., Panontin, T.L. and Dodds Jr, R.H. (1996). Numerical Modeling of Ductile Crack Growth in 3-D using Computational Cell Elements, Int. J. Fract, 82: 67-95.
50. Scheyvaerts, F., Onck, P.R. and Pardoen, T. (2009). The Growth and Coalescence of Voids under Combined Shear and Tension. Submitted to J. Mech. Phys. Solids.
51. Steglich, D. and Brocks, W. (1997). Micromechanical Modelling of the Behaviour of Ductile Materials Including Particles, Comput. Mater. Sci., 9: 7-17.
52. Thomason, P.F. (1968). A Theory of Ductile Fracture by Internal Necking of Cavities, J. Institute. Metals, 96: 360-365.
53. Thomason, P.F. (1990). Ductile Fracture of Metals, Pergamon Press, Oxford.
54. Thomson, C.I.A., Worswick, M.J., Pilkey, A.K. and Lloyd, D.J. (2003). Void Coalescence Within Periodic Clusters of Particles, J. Mech. Phys. Solids, 51: 127-146.
55. Tvergaard, V. (1981). Influence of Voids on Shear Band Instabilities Under Plane Strain Conditions, Int. J. Fract., 17: 389-407.
56. Tvergaard, V. and Needleman, A. (1984). Analysis of the Cup and Cone Fracture in a Round Tensile Bar, Acta. Metall, 32: 157-169.
57. Tvergaard, V. (1990). Material Failure by Void Growth to Coalescence, Adv. Appl. Mech, 27: 83-151.
58. Tvergaard, V. (1997). Studies of Void Growth in a Thin Ductile Layer Between Ceramics, Comput. Mech., 20: 186-191.
59. Weck, A., Wilkinson, D.S., Maire, E. and Toda, H. (2008). Visualization by X-ray Tomography of Void Growth and Coalescence Leading to Fracture in Model Materials, Acta Materialia, 56: 2919-2928.
60. Worswick, M.J., Chen, Z.T., Pilkey, A.K., Lloyd, D. and Court, S. (2001). Damage Characterization and Damage Percolation Modelling in Aluminum Alloy Sheet, Acta. Mater., 49: 2791-2803.
61. Xia, L. and Shih, C.F. (1995 a). Ductile Crack Growth - I. A Numerical Study using Computational Cells with Microstructurally based Length Scales, J. Mech. Phys. Solids, 43: 233-259.
62. Xia, L. and Shih, C.F. (1995 b). Ductile Crack Growth-II. Void Nucleation and Geometry Effects on Macroscopic Fracture Behavior, J. Mech. Phys. Solids, 43: 1953-1981.
63. Xia, L., Shih, C.F. and Hutchinson, J.W. (1995). A Computational Approach to Ductile Crack Growth Under Large Scale Yielding Conditions, J. Mech. Phys. Solids, 43: 389-413.
64. Xia, L. and Shih, C.F. (1996). Ductile Crack Growth-III. Transition to Cleavage Fracture Incorporating Statistics, J. Mech. Phys. Solids, 44: 603-615.
65. Zhang, Z.L. and Niemi, E. (1995). A New Failure Criterion for the Gurson-Tvergaard Dilational Constitutive Model, Int. J. Fract., 70: 321-334.