Influence of microstructure-driven strain localization on the ductile fracture of metallic alloys

Philosophical Magazine

Volumn 84, Issue 3-5, 2004, Pages 269-297

  Pardoen, T ^a   Brechet, Y ^b  

^a UNIVERSITÉ CATHOLIQUE DE LOUVAIN   (Belgium)

^b GRENOBLE INSTITUTE OF TECHNOLOGY   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CRYSTAL MICROSTRUCTURE; DUCTILE FRACTURE; FRACTURE TOUGHNESS; GRAIN BOUNDARIES; PLASTIC FLOW; STRAIN;

METALLIC ALLOYS; MICROSTRUCTURE DRIVEN STRAIN LOCALIZATION; PORTEVIN LE CHATELIER INSTABILITIES; PORTEVIN LECHATELIER BANDS;

ALLOYS;

EID: 0842348140     PISSN: 14786435     EISSN: None     Source Type: Journal    
DOI: 10.1080/14786430310001610366     Document Type: Article

References (79)

1. Abaqus, 1997, Abaqus User's Manual, Version 5.7 (Providence, Rhode Island: Hibbit, Karlsson & Sorensen).
2. Achon, P., 1994, Thèse de Doctorat, Ecole Nationale Supérieure des Mines de Paris, Paris, France.
3. Basquin, O. H., 1910, Proc. Am. Soc. Testing Mater., 10, 625.
4. Becker, R., 1987, J. Mech. Phys. Solids, 35, 577.
5. Benzerga, A. A., 2000, PhD Thesis, Ecole Nationale Supérieure des Mines de Paris, Paris, France.
6. Brechet, Y., Magnin, T., and Sornette, D., 1992, Acta. metall. mater., 40, 2281.
7. Brechet, Y., and Louchet, F., 1993a, Acta mater., 41, 783
8. 1993b, ibid., 41, 793.
9. Brocks, W., Sun, D. Z., and Hönig, A., 1995, Int. J. Plast., 11, 971.
10. Bron, F., Besson, J., Pineau, A., and Ehrström, J.-C., 2002, Proceedings of the 14th Biennial Conference on Fracture, Cracow, Poland, 8-13 September 2002 (Warley West Midlands: Engineering Materials and Advisory Services), pp. 369-376.
11. Brown, L. M., 1991, Metall. Trans. A, 22, 1693.
12. Brown, L. M., and Embury, J. D., 1973, Proceedings of the Third International Conference on the Strength of Metals and Alloys (London: Institute of Metals), pp. 164-169.
13. Clayton, J. Q., and Knott, J. F., 1976, Metal Sci., 10, 63.
14. Coffin, F., 1971, J. Mater., 6, 388.
15. Cox, T. B., and Low, J. R., 1974, Metall. Trans. A, 5, 1457.
16. D'Escatha, Y., and Devaux, J. C., 1979, Elastic - Plastic Fracture, ASTM Special Technical Publication 668, edited by J. D. Landes, J. A. Begley and G. A. Clarke (Philadelphia, Pennsylvania: American Society for Testing and Materials), pp. 229-248.
17. Deschamps, A., Esmaeili, S., Poole, W. J., and Militzer, M., 2000, J. Phys. Paris, IV, 10, 151.
18. Deschamps, A., Livet, F., and Brechet, Y., 1999, Acta mater., 47, 281.
19. Deshpande, H. H. M., Needleman, A., and Van der Giessen, E., 2001, Acta mater., 49, 3189.
20. Devillers-Guerville, L., Besson, J., and Pineau, A., 1997, Nucl. Engng Des., 168, 211.
21. Dorward, and Beernsten, 1995, Metall. Mater. Trans. A 26A, 2481.
22. Dumont, D., Deschamps, A., and Brechet, Y., 2003, Mater. Sci. and Engineering A356, 326.
23. Embury, J. D., and Nes, E., 1974, Z. Metallk., 65, 45.
24. Estrin, Y., and Kubin, L. P., 1993, Scripta mater., 29, 1147.
25. Faleskog, J., and Shih, C. F., 1997, J. Mech. Phys. Solids, 45, 21.
26. Fleck, N. A., and Hutchinson, J. W., 1997, Adv. appl. Mech., 33, 295.
27. Gologanu, M., Leblond, J.-B., Perrin, G., and Devaux, J., 1997, Continuum Micromechanics, CISM Courses and Lectures, Vol. 377, edited by P. Suquet (New York: Springer), pp. 61-130.
28. Gologanu, M., Leblond, J.-B., and Devaux, J., 2001, Int. J. Solids Struct., 38, 5595.
29. Gomiero, P., Brechet, Y., Louchet, F., Tourabi, A., and Wack, B., 1992, Acta. mater., 40, 863.
30. Gurson, A. L., 1977, J. Engng Mater. Technol., 99, 2.
31. Hahn, G. T., and Rosenfield, A. R., 1975, Metall. Trans. A, 6, 653.
32. Hancock, J. W., and Mackenzie, A. C., 1977, J. Mech. Phys. Solids, 14, 147.
33. Hill, R., 1950, The Mathematical Theory of Plasticity (Oxford University Press).
34. Hosford, W. F., and Caddell, R. M., 1993, Metal Forming - Mechanics and Metallurgy (Englewood Cliffs, New Jersey: Prentice-Hall).
35. Huang, Y., 1993, Mech. Mater., 16, 265.
36. Knott, J. F., 1973, Fundamentals of Fracture Mechanics (London: Butterworth).
37. Koplik, J., and Needleman, A., 1988, Int. J. Solids Struct., 24, 835.
38. Kubin, L. P., and Estrin, Y., 1985, Acta metall., 33, 1169
39. Lebyodkin, M., Dunin-Barkowskii, L., Brechet, Y., Estrin, Y., and Kubin, L. P., 2000, Acta mater., 48, 2529
40. Li, B. Q., and Reynolds, A. P., 1998, J. Mater. Sci., 33, 5849.
41. Ludwig, W., Buffiere, J. Y., Savelli, S., and Cloetens, P., 2003, Acta mater., 51, 585.
42. Luo, L. G., Ryks, A., and Embury, J. D., 1989, Metallography, 23, 101.
43. Lynch, S. P., 1973, Metal Sci. J., 7, 93.
44. Magnin, T., Bataille, A., and Ramade, C., 1990, Proceedings of the Eigth Conference on Fracture, Vol. III, edited by D. Firrao, 1330 (Torino, Italy: EMAS (Eng. Mater. advisory services)).
45. Magnin, T., Coudreuse, J., and Lardon, J. M., 1985, Scripta metall., 19, 1487.
46. Manson, S. S., and Hirshberg, M. H., 1964, Proceedings of the Tenth Sagamore Army Materials Research Conference (Syracuse University Press), p. 13.
47. Marini B., Mudry, F., and Pineau, A., 1985, Engng Fracture Mech., 6, 989.
48. McClintock, F. A., 1968a, Int. J. Fracture, 4, 103
49. 1968b, Ductility (Metals Park, Ohio: American Society for Metals), pp. 255-277.
50. Mudry, F., 1982. PhD Thesis, Etude de la Rupture Ductile et de la Rupture par Clivage d'Aciers Faiblement Alliés. Thèse d'état, Université de Technologie de Compiègne, France.
51. Mughrabi, H., Wang, K., Differt, K., and Essmann, U., 1983, Fatigue Mechanisms, Special Technical Publication edited by J. Lankford (Philadelphia, Pennsylvania: American Society for Testing and Materials), p. 5.
52. Needleman A., 1988, Rev. Phys. appl., 23, 585.
53. Needleman, A., and Kushner, A. S., 1990, Eur. J. Mech. A Solids, 9, 193.
54. Needleman, A., and Tvergaard, V., 1987, J. Mech. Phys. Solids, 35, 151.
55. Needleman, A., and Van der Giessen, E., 2001, Mater. Res. Soc. Bull., 26, 211.
56. Pardoen, T., and Hutchinson, J. W., 2000, J. Mech. Phys. Solids, 48, 2467
57. 2003, Acta mater., 51, 133.
58. Pardoen, T., Doghri, I., and Delannay, F., 1998, Acta mater., 46, 541.
59. Pardoen, T., Dumont, D., Deschamps, A., and Brechet, Y., 2003, J. Mech. Phys. Solids, 51, 637.
60. Pardoen, T., and Delannay, F., 1998. Metall. Mater. Trans. A, 29, 1895.
61. Penning, P., 1972, Acta mater., 20, 397.
62. Pineau, A., 1992, Topics in Fracture and Fatigue, edited by A.S. Argon (Berlin: Springer), pp. 197-234.
63. Polak, J., and Likutin, P., 1990, Fatigue Fracture Engng Mater. Struct., 13, 119.
64. Ramade, C., 1990, PhD Thesis, St Etienne, France.
65. Rice, J. R., 1976, The Localization of Plastic Deformation, edited by W. T. Koiter, (Amsterdam: North-Holland), pp. 207-220.
66. Rice, J. R., and Johnson, M. A., 1970, Inelastic Behavior of Solids, edited by M. F. Kanninen, W. G. Adler, A. R. Rosenfield and R. I. Jaffee (New York: McGraw-Hill), pp. 641-672.
67. Richelsen, A. B., and Tvergaard, V., 1994, Acta metall. mater., 42, 2561.
68. Ryum, N., 1968, Acta metall., 16, 327.
69. Suh, C. M., and Kitagawa, H., 1987, Fatigue Fracture Engng Mater. Struct., 9, 409.
70. Thomason, P. F., 1990, Ductile Fracture of Metals (Oxford: Pergamon).
71. Tvergaard, V., 1981, Int. J. Fract., 17, 389
72. 1990, Adv. appl. Mech., 27, 83.
73. Tvergaard, V., and Hutchison, J. W., 2001, Mechanics report 372, Harvard University, Cambridge, Massachusetts.
74. Unwin, P., Lorimer, G. W., and Nicholson, R., 1969, Acta metall., 17, 1379.
75. Unwin, P., and Smith, G., 1969, J. Inst. Metals, 97, 299.
76. Vasudevan, A., and Doherty, R., 1987, Acta metall., 35, 1193.
77. Winter, A. T., 1974, Phil. Mag., 30, 8719.
78. Worswick, M. J., Chen, Z. T., Pilkey, A. K., Lloyd, D., and Court, S., 2001, Acta mater., 49, 2791.
79. Xia, L., and Shih, C. F., 1995, J. Mech. Phys. Solids, 43, 1953.