Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids

International Journal of Plasticity

Volumn 24, Issue 7, 2008, Pages 1158-1189

  Monchiet, Vincent ^a   Cazacu, Oana ^b   Charkaluk, Eric ^a   Kondo, Djimedo ^a  

^a UNIV LILLE   (France)

^b University of Florida   (United States)

Author keywords

A. Microstructures; A. Yield condition; B. Anisotropic material; B. Ideally plastic material; B. Porous material

Indexed keywords

ANISOTROPY; BOUNDARY CONDITIONS; DEFORMATION; MATHEMATICAL MODELS; MICROSTRUCTURE; NUMERICAL METHODS; POROUS MATERIALS;

ANISOTROPIC MATERIALS; CONFOCAL SPHEROIDAL CAVITY; YIELD CONDITION;

PLASTIC PRODUCTS;

EID: 43049122461     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.08.008     Document Type: Article

References (45)

1. Benzerga, A.A., 2000. Rupture ductile des tôles anisotropes. Ph.D. thesis, Ecole Nationale Supérieure des Mines de Paris.
2. Benzerga A.A., and Besson J. Plastic potentials for anisotropic porous solids. Eur. J. Mech. A/Solids 20 (2001) 397-434
3. Benzerga A.A., Besson J., Batisse R., and Pineau A. Synergistic effects of plastic anisotropy and void coalescence on fracture mode in plane strain. Modell. Simul. Mater. Sci. Eng. 10 (2002) 73-102
4. Benzerga A.A., Besson J., and Pineau A. Anisotropic ductile fracture, Part I: experiments. Acta Mater. 152 (2004) 4623-4638
5. Benzerga A.A., Besson J., and Pineau A. Anisotropic ductile fracture, Part II: theory. Acta Mater. 152 (2004) 4639-4650
6. Bonora N., Gentile D., Pirondi A., and Newaz G. Ductile damage evolution under triaxial state of stress: theory and experiments. Int. J. Plasticity 21 (2005) 981-1007
7. Brunet M., Morestin F., and Walter H. Damage identification for anisotropic sheet-metals using a non-local damage model. Int. J. Damage Mech. 13 (2004) 35-57
8. Budiansky B., and O'connell R.J. Elastic moduli of a cracked solid. Int. J. Solid. Struct. 12 2 (1976) 81-97
9. Chien W.Y., Pan J., and Tang S.C. Modified anisotropic Gurson yield criterion for porous ductile sheet metals. J. Eng. Mat. Tech. 123 (2001) 409-413
10. Croix P., Lauro F., Oudin J., and Christlein J. Improvement of damage prediction by anisotropy of microvoids. J. Mater. Process. Technol. 143-144 (2003) 202-208
11. Darrieulat M., and Montheillet F. Extension of the Hill (1948) yield criterion to the case of prismatic monoclinic symmetry. Int. J. Mech. Sci. 38 (1996) 1273-1284
12. Gãrãjeu, M., 1995. Contribution àl'étude du comportement non linéaire de milieux poreux avec ou sans renfort. Ph.D. Thesis, University of Marseille, France.
13. Garajeu M., Michel J.C., and Suquet P. A micromechanical approach of damage in viscoplastic materials by evolution in size, shape and distribution of voids. Comput. Methods Appl. Mech. Eng. 183 (2000) 223-246
14. Gologanu, M., 1997. Etude de quelques problemes de rupture ductile, Ph.D. Thesis, University Pierre et Marie Curie, France.
15. Gologanu M., Leblond J.-B., and Devaux J. Approximate models for ductile metals containing non-spherical voids - case of axisymmetric prolate ellipsoidal cavities. J. Mech. Phys. Solids 41 11 (1993) 1723-1754
16. Gologanu M., Leblond J.-B., and Devaux J. Approximate models for ductile metals containing non-spherical voids - case of axisymmetric oblate ellipsoidal cavities. J. Eng. Mat. Tech. 116 (1994) 290-297
17. Gologanu M., Leblond J.-B., Perrin G., and Devaux J. Recent extensions of Gurson's model for porous ductile metals. In: Suquet P. (Ed). Continuum Micromechanics (1997), Springer 61-130
18. Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth: Part I. - Yield criterion and flow rules for porous ductile media. J. Eng. Mat. Tech. 99 (1977) 2-15
19. Hill R. A theory of yielding and plastic flow of anisotropic solids. Proc. Roy. Soc. London A 193 (1948) 281-297
20. Hom C.L., and McMeeking R.M. Void growth in elastic-plastic materials. J. Appl. Mech. 56 (1989) 309-317
21. Kysar J.W., and Gan Y.X. Cylindrical void in a rigid-ideally plastic single crystal III: hexagonal close-packed crystal. Int. J. Plasticity 23 4 (2007) 592-619
22. Kysar J.W., Gan Y.X., and Mendez-Arzuza G. Cylindrical void in a rigid-ideally plastic single crystal. Part I: Anisotropic slip line theory solution for face-centered cubic crystals. Int. J. Plasticity 21 8 (2005) 1481-1520
23. Kysar J.W., Gan Y.X., and Morse T.L. Cylindrical void in a rigid-ideally plastic single crystal II: Experiments and simulations. Int. J. Plasticity 22 1 (2006) 39-72
24. Leblond J.B., Perrin G., and Suquet P. Exact results and approximate models for porous viscoplastic solids. Int. J. Plasticity 10 3 (1994) 213-235
25. Lee B.I., and Mear M.E. Axisymmetric deformation of power-law solids containing a dilute concentration of aligned spheroidal voids. J. Mech. Phys. Solids 40 (1992) 1805-1837
26. Liao K., Pan J., and Tang S. Approximate yield criteria for anisotropic porous ductile sheet metals. Mech. Mater. 26 (1997) 213-226
27. Liao K. Yield criteria for porous ductile sheet metals with planar anisotropy under plane stress conditions. Comput. Struct. 82 (2004) 2573-2583
28. McClintock F.A. A criterion for ductile fracture by the growth of holes. Approximate yield criteria for anisotropic porous ductile sheet metals. ASME J. Appl. Mech. 35 (1968) 363-371
29. Monchiet, V., 2006. Contributions à la modélisation micromécanique de l'endommagement et de la fatigue des métaux ductiles. Ph.D. thesis, University of Sciences and Technologies of Lille, France.
30. Monchiet V., Charkaluk E., and Kondo D. An improvement of Gurson-type models of porous materials by using Eshelby-like trial velocity fields. C.R. Mécanique 335 (2007) 32-41
31. Moon P., and Spencer D.E. Field Theory Handbook (1961), Springer-Verlag, Berlin
32. Pardoen T., and Hutchinson J.W. An extended model for void growth and coalescence. J. Mech. Phys. Solids 48 (2000) 2467-2512
33. Pardoen T., and Hutchinson J.W. Micromechanics-based model for trends in toughness of ductile metals. Acta Mater. 51 (2003) 133-148
34. Perrin, G., 1992. Contribution à l'étude théorique et numérique de la rupture ductile des métaux. Ph.D. Thesis, Ecole Polytechnique.
35. Perrin G., and Leblond J.-B. Analytical study of a hollow sphere made of plastic porous material and subjected to hydrostatic tension - application to some problems in ductile fracture of metals. Int. J. Plasticity 6 (1990) 677-699
36. Pirondi A., Bonora N., Steglich D., Brocks W., and Hellmann D. Simulation of failure under cyclic plastic loading by damage models. Int. J. Plasticity 22 (2006) 2146-2170
37. Ragab A.R. Application of an extended void growth model with strain hardening and void shape evolution to ductile fracture under axisymmetric tension. Eng. Fract. Mech. 71 (2004) 1515-1534
38. Ragab A.R., and Saleh Ch.A.R. Evaluation of constitutive models for voided solids. Int. J. Plasticity 15 (1999) 1041-1065
39. Rice J.R., and Tracey D.M. On the ductile enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 17 (1969) 201-217
40. Siruguet K., and Leblond J.-B. Effect of void locking by inclusions upon the plastic behavior of porous ductile solids - I: theoretical modeling and numerical study of void growth. Int. J. Plasticity 20 2 (2004) 225-254
41. Siruguet K., and Leblond J.-B. Effect of void locking by inclusions upon the plastic behavior of porous ductile solids - II: theoretical modeling and numerical study of void growth. Int. J. Plasticity 20 2 (2004) 255-268
42. Son H.S., and Kim Y.S. Prediction of forming limits for anisotropic sheets containing prolate ellipsoidal voids. Int. J. Mech. Sci. 45 (2003) 1625-1643
43. Suquet, P., 1982. Plasticité et homogénéisation. Ph.D. Thesis, University Pierre et Marie Curie.
44. Tvergaard V., and Needleman A. Analysis of the cup-cone fracture in a round tensile bar. Acta Met. Mater. 32 (1984) 157-169
45. Wang D., and Pan J. An anisotropic gurson yield criterion for porous ductile sheet metals with planar anisotropy. Int. J. Damage Mech. 13 (2004)