On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming

International Journal of Plasticity

Volumn 26, Issue 11, 2010, Pages 1541-1575

  Badreddine, Houssem ^a   Saanouni, Khemaïs ^a   Dogui, Abdelwaheb ^b  

^a UNIVERSITÉ DE TECHNOLOGIE DE TROYES   (France)

^b UNIVERSITY OF MONASTIR   (Tunisia)

Author keywords

Ductile damage; Finite strain; Isotropic hardening; Kinematic hardening; Plastic anisotropy

Indexed keywords

DUCTILE DAMAGE; FINITE STRAIN; ISOTROPIC HARDENINGS; KINEMATIC HARDENING; PLASTIC ANISOTROPY;

CONSTITUTIVE EQUATIONS; HARDENING; KINEMATICS; METAL FORMING; PLASTICITY; PLASTICS; ROTATION; SHEET METAL; STRESS ANALYSIS;

ANISOTROPY;

EID: 77957307392     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2010.01.008     Document Type: Article

References (113)

1. A. Abdul-Latif, and K. Saanouni Damaged anelastic behavior of FCC poly-crystalline metals with micromechanical approach Int. J. Damage Mech. 3 1994 237
2. N. Abedrabbo, F. Pourboghrat, and J. Carsley Forming of aluminum alloys at elevated temperatures - Part 1: Material characterisation Int. J. Plasticity 22 2006 314 341
3. N. Abedrabbo, F. Pourboghrat, and J. Carsley Forming of aluminum alloys at elevated temperatures - Part 2: numerical modeling and experimental verification Int. J. Plasticity 22 2006 342 373 (Pubitemid 41377788)
4. N. Aravas The analysis of void growth that leads to central burst during extrusion J. Mech. Phys. Solids 34 1986 55 79
5. H. Aretz A non-quadratic plane stress yield function for orthotropic sheet metals J. Mater. Process. Tech. 168 2005 1 9
6. H. Aretz A simple isotropic-distortional hardening model and its application in elastic-plastic analysis of localized necking in orthotropic sheet metals Int. J. Plasticity 2008
7. A. Baczmański, K. Wierzbanowski, P. Lipiński, R.D. Helmholdt, G. Ekambaranathan, and B. Pathiraj Phil. Mag. 69 1994 437
8. Badreddine, H., 2006. Elastoplasticité anisotrope endommageable en transformations finies: aspects théoriques, numériques et applications. Ph.D. Thesis, Université de Technologie de Troyes, France.
9. D. Banabic, H. Aretz, D.S. Comsa, and L. Paraianu An improved analytical description of orthotropy in metallic sheets Int. J. Plasticity 21 2005 493 512
10. D. Banabic, T. Kuwabara, T. Balan, D.S. Comsa, and D. Julean Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions Int. J. Mech. Sci. 45 2003 797 811
11. F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, and E. Chu Plane stress yield function for aluminum alloy sheets - Part I: theory Int. J. Plasticity 19 2003 1297 1319
12. F. Barlat, R.C. Becker, J.C. Brem, D.J. Lege, S.J. Murtha, Y. Hayashida, Y. Maeda, M. Yanagawa, K. Chung, K. Matsui, and S. Hattori Yielding description for solution strengthened aluminum alloys Int. J. Plasticity 13 4 1997 385 401
13. F. Barlat, D.J. Lege, and J.C. Brem A six-component yield function for anisotropic materials Int. J. Plasticity 7 1991 693 712
14. F. Barlat, and J. Lian Plastic behavior and stretchability of sheet metals. Part I: a yield function for orthotropic sheets under plane stress conditions Int. J. Plasticity 5 1989 51 66
15. K.J. Bathe Finite Element Procedures in Engineering Analysis 1981 Prentice Hall
16. T. Belytschko, W.K. Liu, and B. Moran Nonlinear Finite Elements for Continua and Structures 2000 John Wiley New York
17. B. Bennani, and J. Oudin Backward extrusion of steels, effects of punch design on flow mode and void volume fraction Int. J. Mach. Tools Manuf. 35 1995 903 911
18. Bezzina, S., Saanouni, K., 1996. Theorical and numerical modeling of sheet metal shear cutting. In: Mat-Tech'96, LU, J., ITT International, pp. 15-24.
19. J. Bonnet, and R.D. Wood Nonlinear Continuum Mechanics for Finite Element Analysis 1997 Cambridge University Press UK
20. N. Bontcheva, and R. Iankov Numerical investigation of the damage process in metal forming Eng. Frac. Mech. 40 1991 387 393
21. N. Boudeau, and J.C. Gelin Prediction of the localized necking in 3D sheet metal forming processes from FE simulations J. Mat. Proc. Tech. 45 1994 229 235
22. M. Boudifa, K. Saanouni, and J.L. Chaboche A micromechanical model for inelastic ductile damage prediction in polycrystalline metals Int. J. Mechan. Sci. 51 2009 453 464
23. D. Brokken, W. Brekemans, and F. Baaijens Numerical modelling of the metal blanking process J. Mat. P. Tech. 83 1998 192 199
24. M. Brunet, F. Morestin, and H. Walter Numerical analysis of failure in sheet metal forming with experimental validation Revue Européennes des Eléments Finis 2-3-4 2001 275 293
25. M. Brunet, N. Sabourin, and S. Mgnib-Touchal The prediction of necking and failure in 3D sheet forming analysis using damage variable J. Physique III 6 1996 473 482
26. M. Brünig Numerical analysis and elastic-plastic deformation behavior of anisotropically damaged solids Int. J. Plasticity 18 2002 1237 1270
27. M. Brünig An anisotropic ductile damage model based on irreversible thermodynamics Int. J. Plasticity 19 2003 1679 1713
28. M. Brünig, and H. Obrecht Finite elastic-plastic deformation behavior of crystalline solids based on non-associated macroscopic flow rule, Int J. Plasticity 14 1998 1189
29. O. Cazacu, and F. Barlat Generalization of Drucker's yield criterion to orthotropy Math. Mech. Solids 6 2001 613 630
30. O. Cazacu, and F. Barlat A criterion for description of anisotropy and yield differential effects in pressure insensitive metals Int. J. Plasticity 20 2004 2027 2045
31. J.L. Chaboche Continuum damage mechanics: Parts I and II J. Appl. Mechan. 55 1988 59 72
32. J.L. Chaboche Thermodynamically founded CDM models for creep and other conditions: CISM courses and lectures no. 399, International centre for mechanical sciences Creep Damage Mater. Struct. 1999 209 283
33. J.L. Chaboche, M. Boudifa, and K. Saanouni A CDM approach of ductile damage with plastic incompressibility Int. J. Fracture 137 2006 51 75
34. A. Chamekh, H. BelHadjSalah, R. Hambli, and M.A. Gahbiche Inverse identification using the bulge test and artificial neural networks J. Mater. Process. Technol. 177 2006 307 310
35. S. Chatti, A. Dogui, Ph. Dubujet, and F. Sidoroff An objective incremental formulation for the solution of anisotropic elastoplastic problems at finite strain Commun. Numer. Meth.Engng. 17 2001 845 862
36. K. Chung, M.G. Lee, D. Kim, C.K. Kim, M.L. Wenner, and F. Barlat Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield function; part I: theory and formulation Int. J. Plasticity 21 2005 861 882 (Pubitemid 40034578)
37. M.A. Crisfield Non-linear finite element analysis of solids and structures vol. 2 1997 John Wiley Chichester
38. V. Cvitanic, F. Vlak, and Z. Lozina A finite element formulation based on non-associated plasticity for sheet metal forming Int. J. Plasticity 24 2008 646 687
39. Y.F. Dafalias Plastic spin: necessity or redundancy Int. J. Plasticity 9 1998 909 931
40. Y.F. Dafalias The plastic spin J. Appl. Mech. 52 1985 865 871
41. P.R. Dawson, and E. Marin Computational mechanics for metal deformation processes using polycrystal plasticity Adv. Appl. Mech. 34 1998 77 169
42. J.K. Dienes On the analysis of rotation and stress rate in deforming bodies Acta Mech. 32 1979 217 232
43. Dogui, A., 1989. Plasticité anisotrope en grandes déformations. Thse de doctorat s - sciences, U.C.B., Lyon 1.
44. P. Franciosi, M. Berveiller, and A. Zaoui Latent hardening in copper and aluminium single crystals Acta Metall. 28 1980 273 283
45. J.C. Gelin, J. Oudin, and Y. Ravalard An improved FEM for the analysis of the damage and ductile fracture in cold metal forming processes Ann. CIRP 34 1 1985 209 213
46. J.C. Gelin Finite element analysis of ductile fracture and defects formations in cold and hot forging Ann. CIRP 39 1990 215 218
47. P. Germain, Q.S. Nguyen, and P. Suquet Continuum thermodynamics J. Appl. Mech. 50 1983 1010 1020
48. A.-L. Gurson Continuum theory of ductile rupture by void nucleation and growth: part I - yield criteria and flow rules for porous ductile media J. Eng. Mater. Technol. 99 1977 2 15
49. P. Hartley, S.E. Clift, J. Salimi, C.E.N. Sturgess, and I. Pillinger The prediction of ductile fracture initiation in metalforming using a finite element method and various fracture criteria Res. Mech. 28 1989 269 293
50. R. Hill A theory of the yielding and plastic flow of anisotropic metals Proc. Roy. Soc. London A193 1948 281 297
51. R. Hill, and J.W. Hutchinson Differential hardening in sheet metal under biaxial loading: a theoretical framework J. Appl. Mechan. 59 1992 S1 S9
52. M. Homsi, L. Moranay, and J.M. Roelandt Remeshing processes applied to the simulation of metal cutting Revue Européenne des Eléments Finis 5 1996 297 321
53. Hosford, W.F., 1979. On yield loci of anisotropic cubic metals. In: Proc. 7th North American Metalworking Conf. (NMRC), SME, Dearborn, 191 - 197.
54. W.F. Hosford A generalized isotropic yield criterion J. Appl. Mech. Trans. ASME 39 1972 607 609
55. T.J.R. Hughes The Finite Element Method 1987 Prentice Hall
56. L.M. Kachanov Introduction to Continuum Damage Mechanics 1986 Martinus Nijhoff Publishers The Netherlands
57. S.R. Kalidindi Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals Int. J. Plasticity 17 2001 837
58. A.P. Karafillis, and M.C. Boyce A general anisotropic yield criterion using bounds and a transformation weighting tensor J. Mech. Phys. Solids 41 1993 1859 1886
59. A.S. Khan, R. Kazmi, and B. Farrokh Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures Int. J. Plasticity 23 2007 931 950
60. A.S. Khan, R. Kazmi, A. Pandey, and T. Stoughton Evolution of Subsequent Yield Surfaces and Elastic Constants with Finite Plastic Deformation, Part-I: A Very Low Work Hardening Aluminum Alloy (6061-T6511) International Journal of Plasticity 25 9 2009 1611 1625
61. M. Khelifa, H. Badreddine, M.-A. Gahbiche, K. Saanouni, A. Cherouat, and A. Dogui Effect of anisotropic plastic flow on the ductile damage evolution in sheet metal forming. Application to the circular bulging test Int. J. Form. Process. 8 2 2005 271 289
62. U.F. Kocks, C.N. Tomé, and H.R. Wenk Texture and Anisotropy, Preferred Orientations in Polycristals and their Effect on Materials Properties 1998 Cambridge University Press
63. M. Kothari, and L. Anand Elasto-viscoplastic constitutive equations for policrystalline metals: application to tantalum J. Mech. Phys. Solids 1998 46 51
64. M. Kuroda, and V. Tvergaard Forming limit diagrams for anisotropic metal sheets with different yield criteria Int. J. Solids Struct. 37 2000 5037 5059
65. M. Kuroda, and V. Tvergaard A phenomenological plasticity model with non-normality effects representing observations in crystal plasticity J. Mechan. Phys. Solids 49 2001 1239 1263
66. R.A. Lebensohn, and C.N. Tome A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys Acta Metall. Mater. 41 1993 2611
67. E.H. Lee, R.L. Mallet, and T.B. Wertheimer Stress analysis for anisotropic hardening in finite-deformation plasticity J. Appl. Mech. 50 1983 554 560
68. H. Lee, K.E. Peng, and J. Wang An anisotropic damage criterion for deformation instability and its application to forming limit analysis of metal plates Eng. Frac. Mech. 21 5 1985 1031 1054
69. J. Lemaitre A Course on Damage Mechanics 1992 Springer Berlin
70. J. Lemaitre, and J.L. Chaboche Mécanique des matériaux solides 1985 Dunod Paris
71. P. Lipinski, M. Berveiller, E. Reubrez, and J. Morreale Arch. Appl. Mech. 65 1995 291
72. J. Mandel Equations constitutives et directeurs dans les milieux plastiques et viscoplastiques Int. J. Solids Struct. 9 1971 725 740
73. R. Masson, and A. Zaoui Self-consistent estimates for the ratedependent elastoplastic behavior of polycrystalline materials J. Mech. Phys. Solids 47 1999 1543
74. Mathur, K., Dawson, P., 1987. Damage evolution modeling in bulk forming processes. In: Computational Methods for Predicting Material Processing Defects, Predeleanu, Elsevier.
75. L. Meric, and G. Cailletaud Single crystal modelling for structural calculations. Part2: finite element implementation J. Engng. Mat. Technol. 113 1991 171 182
76. A. Molinari, G.R. Canova, and S. Ahzi A self consistent approach of the large deformation polycrystal viscoplasticity Acta Metall; 35 1987 2983
77. S. Murakami Mechanical modeling of material damage J. Appl. Mech. 55 2 1988 280 286
78. E. Onate, and M. Kleiber Plastic and viscoplastic flow of void containing metal - applications to axisymmetric sheet forming problem Int. J. Num. Meth. Engng. 25 1988 237 251
79. T. Pardoen, I. Doghri, and F. Delannay Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars Acta Mater. 46 1998 541 552
80. T. Pardoen, F. Hachez, B. Marchioni, H. Blyth, and A.G. Atkins Mode I fracture of sheet metal J. Mech. Phys. Solids 52 2004 423 452
81. J.E. Paulun, B. Ryszard, and R.B. Pecherski On the application of the plastic spin concept for the description of anisotropic hardening in finite deformation plasticity Int. J. Plasticity 3 1987
82. P. Ponte Castañeda Exact second order estimates for the effective mechanical properties of nonlinear composite material, J Mech. Phys. Solids 1996 827 862
83. P. Ponte Castañeda Nonlinear polycrystals with microstructure evolution E. Inan, K.Z. Markov, Proceedings of the 9th International Symposium. Continuum Models and Discrete Systems 1999 World Scientific Publishing Co. 22 28
84. J.R. Rice Inelastic constitutive relations for solids, an internal variable theory and its application to metal plasticity J. Mech. Phys. Solids 9 1971 233 244
85. K. Runesson, and Z. Mrotz A note on nonassociated plastic flow rules Int. J. Plasticity 5 1989 639
86. K. Saanouni On the numerical prediction of the ductile fracture in metal forming Eng. Fract. Mechan. 75 2008 3545 3559
87. K. Saanouni, and A. Abdul-Latif Micromechanical modeling of low cycle fatigue under complex loadings-Part 1 theoretical formulation Int. J. Plasticity 12 9 1996 1111 1121 (Pubitemid 126404034)
88. Saanouni, K., Chaboche, J.L., 2003. Computational damage mechanics. Application to metal forming. In: Milne, I., Ritchie, R.O., Karihaloo, B. (Eds.) Numerical and Computational Methods, Chapter 7, vol. 3, Elsevier Oxford (UK), pp. 321-376, ISBN 0-08-043749-4.
89. Saanouni, K., Hammi, Y., 2000. Numerical simulation of damage in metal forming processes. Continuous Damage and Fracture. Benallal, A, Elsevier, pp. 353-363, ISBN 2-84299-247-4.
90. K. Saanouni, A. Cherouat, and Y. Hammi Numerical aspects of finite elastoplasticity with isotropic ductile damage for metal forming Revue européenne des éléments finis 2-3-4 2001 327 351
91. K. Saanouni, Ch. Forster, and F. Ben Hatira On the anelastic flow with damage J. Damage Mechan. 3 1994 140 169
92. K. Saanouni, K. Nesnas, and Y. Hammi Damage modelling in metal forming processes Int. J. Damage Mechan. 9 3 2000 196 240
93. F. Sidoroff The geometrical concept of intermediate configuration and elastic plastic finite strain Arch. Mech. 25 2 1973 299 308
94. F. Sidoroff Incremental constitutive equation for large strain elastoplasticity Int. J. Engng. Sc. 20 1 1982 19 26
95. F. Sidoroff, and A. Dogui Some issues about anisotropic elastic-plastic models at finite strain Int. J. Sol. Str. 38 2001 9569 9578
96. J.C. Simo, and M. Ortiz A unified approach to finite element deformation elastoplastic analysis based on the use of hyperelastic constitutive equations Comp. Meth. Appl. Meth. Engng. 49 1985 221 245
97. J.C. Simo, and T.J.R. Hughes Computational Inelasticity 1998 Springer-Verlag New York Inc.
98. Sornin, D., 2007. Sur les formulations elastoplastiques non-locales en gradient d'endommagement. Ph.D. Thesis, Université de Technologie de Troyes, France.
99. T.B. Stoughton, and J.W. Yoon A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming Int. J. Plasticity 20 2004 705 731
100. T.B. Stoughton, and J.W. Yoon On the existence of indeterminate solutions to the equations of motion under non-associated flow Int. J. Plasticity 24 2008 583 613
101. T.B. Stoughton, and J.W. Yoon A review of Drucker's postulate and the issue of plastic stability in metal forming Int. J. Plasticity 22 2006 391 433
102. T.B. Stoughton A non-associated flow rule for sheet metal forming Int. J. Plasticity 18 2002 687 714
103. T.B. Stoughton, and J.W. Yoon Anisotropic hardening and non-associated flow in proportional loading of sheet metals Int. J. Plasticity 25 2009 1777 1817
104. A. Taherizadeh, D.E. Green, A. Gahei, and J.W. Yoon A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming Int. J. Plasticity 26 2 2010 288 309
105. P. Van Houtte Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning Acta Metall. Mater. 26 1978 591
106. G.Z. Voyiadjis, and P.I. Kattan A plasticity-damage theory for large deformations of solids. Part I: theoretical formulation Int. J. Eng. Sci. 30 1992 1089 1108
107. G.Z. Voyiadjis, and P.I. Kattan Finite strain plasticity and damage in constitutive modeling of metals with spin tensors App. Mech. Rev. 45 1992 S95 S109
108. G.Z. Voyiadjis, and P.I. Kattan Advances in Damage Mechanics: Metals and Metal Matrix Composites 1999 Elsevier Oxford, UK
109. C.C. Wang A new representation theorem for isotropic functions, Part I and II Arch. Ration. Mech. An. 36 1970 166 223
110. J.W. Yoon, F. Barlat, R.E. Dick, K. Chung, and T.J. Kang Plane stress yield function for aluminum alloy sheets - Part II: FE formulation and its implementation Int. J. Plasticity 20 2004 495 522
111. J.W. Yoon, F. Barlat, R.E. Dick, and M.E. Karabin Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function Int. J. Plasticity 22 2006 174 193
112. Y.Y. Zhu, and S. Cescotto The finite element prediction of ductile fracture initiation in dynamic metalforming processes J. Physique III 1 1991 751 757
113. Y.Y. Zhu, S. Cescotto, and A.M. Habraken A fully coupled elastoplastic damage modeling and fracture criteria in metal forming processes J. Mat. Proc. Tech. 32 1992 197 204