Plastic behavior of metals at large strains: Experimental studies involving simple shear

Journal of Engineering Materials and Technology

Volumn 131, Issue 1, 2009, Pages 0111071-0111078

  Rauch, E F ^a  

^a UNIV GRENOBLE ALPES   (France)

Author keywords

Equal channel angular extrusion; Grain refinement; Planar simple shear test; Severe plastic deformation; Stage IV

Indexed keywords

EXTRUSION; GRAIN SIZE AND SHAPE; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; LOW CARBON STEEL; TEXTURES;

ANISOTROPIC BEHAVIORS; CRYSTALLOGRAPHIC TEXTURES; EQUAL CHANNEL ANGULAR EXTRUSION; EXPERIMENTAL DEVICES; PLASTIC BEHAVIOR; SEVERE PLASTIC DEFORMATIONS; SIMPLE MODELING; SIMPLE SHEAR TEST;

GRAIN REFINEMENT;

EID: 77955389417     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.3030942     Document Type: Conference Paper

References (53)

1. Gil Sevillano, J., van Houtte, P., and Aernoudt, E., 1980, "Large Strain Work Hardening and Textures", Prog. Mater. Sci., 25, pp. 64-412.
2. Gil Sevillano, J., 1991, "Substructure and Strengthening of Heavily Deformed Single and Two-Phase Metallic Materials", J. Phys. III, 1, pp. 967-988.
3. Zehetbauer, M., and Seumer, V., 1993, "Cold Work Hardening in Stage IV and V of F. C. C. Metals-I. Experiments and Interpretation", Acta Metall. Mater., 41, pp. 557-588.
4. G'Sell, C., Boni, S., and Shrivastava, S., 1983, "Application of the Plane Simple Shear Test for Determination of the Plastic Behaviour of Solid Polymers at Large Strains", J. Mater. Sci., 18, pp. 903-918.
5. Miyauchi, K., 1984, "A Proposal of a Planar Simple Shear Test in Sheet Metals", Sci. Pap. Inst. Phys. Chem. Res. (Jpn.), 78, pp. 27-40.
6. Rauch, E. F., 1998, "Plastic Anisotropy of Sheet Metals Determined by Simple Shear Tests", Mater. Sci. Eng., A., 241, pp. 179-183.
7. Yoon, J. W., Barlat, F., Gracio, J. J., and Rauch, E., 2005, "Anisotropic Strain Hardening Behavior in Simple Shear for Cube Textured Aluminum Alloy Sheets", Int. J. Plast, 21, pp. 2426-2447.
8. Raphanel, J. L., Rauch, E., Shen, E. L., and Schmitt, J.-H., 1987, "Shear of Prestrained Steel Specimens", Scr. Metall., 21, pp. 1087-1090.
9. Rauch, E. F., and Schmitt, J.-H., 1989, "Dislocation Substructures in Mild Steel Deformed in Simple Shear", Mater. Sci. Eng., A., 113, pp. 441-448.
10. Barlat, F., Duarte, J. M. F., Gracio, J. J., Lopes, A. B., and Rauch, E. F., 2003, "Plastic Flow for Non-Monotonic Loading Conditions of an Aluminum Alloy Sheet Sample", Int. J. Plast., 19, pp. 1215-1244.
11. Haddadi, H., Bouvier, S., Banu, M., Maier, C., and Teodosiu, C., 2006, "Towards an Accurate Description of the Anisotropic Behaviour of Sheet Metals Under Large Plastic Deformations: Modelling, Numerical Analysis and Identification", Int. J. Plast., 22, pp. 2226-2271.
12. Hu, Z., Rauch, E. F., and Teodosiu, C., 1992, "Work-Hardening Behavior of Mild Steel Under Stress Reversal at Large Strains", Int. J. Plast., 8, pp. 839-856.
13. Vincze, G., Rauch, E. F., Gracio, J. J., Barlat, F., and Lopes, A. B., 2005, "A Comparison of the Mechanical Behaviour of an AA1050 and a Low Carbon Steel Deformed Upon Strain Reversal", Acta Mater., 53, pp. 1005-1013.
14. Rauch, E. F., Gracio, J. J., and Barlat, F., 2007, "Work-Hardening Model for Polycrystalline Metals Under Strain Reversal at Large Strains", Acta Mater., 55, pp. 2939-2948.
15. Richert, M., Liu, Q., and Hansen, N., 1999, "Microstructural Evolution Over a Large Strain Range in Aluminium Deformed by Cyclic-Extrusion-Compression", Mater. Sci. Eng., A., 260, pp. 275-283.
16. Valiev, R. Z., Islamgaliev, R. K., and Alexandrov, I. V., 2000, "Bulk Nanostructured Materials From Severe Plastic Deformation", Prog. Mater. Sci., 45, pp. 103-189.
17. Segal, V. M., 1995, "Materials Processing by Simple Shear", Mater. Sci. Eng., A., 197, pp. 157-164.
18. Dupuy, L., Blandin, J. J., and Rauch, E. F., 2000, "Structural and Mechanical Properties in AA 5083 Processed by ECAE", Mater. Sci. Technol., 16, pp. 1256-1258.
19. Valiev, R. Z., and Langdon, T. G., 2006, "Principles of Equal-Channel Angular Pressing as a Processing Tool for Grain Refinement", Prog. Mater. Sci., 51, pp. 881-981.
20. Saito, Y., Utsunomiya, H., Tsuji, N., and Sakai, T., 1999, "Novel Ultra-High Straining Process for Bulk Materials-Development of the Accumulative Roll-Bonding (ARB) Process", Acta Mater., 47, pp. 579-583.
21. Tsuji, N., Ito, Y., Saito, Y., and Minamino, Y., 2002, "Strength and Ductility of Ultrafine Grained Aluminum and Iron Produced by ARB and Annealing", Scr. Mater., 47, pp. 893-899. (Pubitemid 35220137)
22. Costa, A. L. M., Reis, A. C. C., Kestens, L., and Andrade, M. S., 2005, "Ultra Grain Refinement and Hardening of IF-Steel During Accumulative Roll-Bonding", Mater. Sci. Eng., A., 406, pp. 279-285.
23. Röhm, F., and Kochendörfer, A., 1950, "Neue Ergebnisse über die Verfestigung bei des plastischen Verformung von Kristallen. I. Schubverformung von langen Kristallen", Z. Metallk., 41, pp. 265-272.
24. Rauch, E. F., 1992, "The Flow Law of Mild Steel Under Monotonic or Complex Strain Path", Solid State Phenom., 23-24, pp. 317-334.
25. Roche, C., and Rieu, J., 1975, "Influence of Normal Stress on Deformation by Shear of Oriented Fe-Si Alloy Single-Crystals", C. R. Seances Acad. Sci., Ser. C., 280(11), pp. 709-712.
26. Duquaire, B., and Biscondi, M., 1975, "Formation of Slip Bands in Aluminum Single-Crystals at 600 °C", C. R. Seances Acad. Sci., Ser. C., 280(5), pp. 259-262.
27. Maniguet, L., Bastie, P., Bellet, D., and Dupeux, M., 1995, "Non-Destructive Bulk Detection of Localized Straining by Gamma-Ray Diffractometry. Application to a Sheared Single Crystal of CMSX-2 Superalloy", Phys. Status Solidi A., 148(2), pp. 389-406.
28. Rauch, E. F., Hashimoto, S., and Baudelet, B., 1990, "Simple Shear Deformation of Iron-Silicon Single-Crystals", Scr. Metall. Mater., 24, pp. 1081-1085.
29. Langford, G., and Cohen, M., 1969, "Strain Hardening of Iron by Severe Plastic Deformation", Transaction ASM, 62, pp. 623-38.
30. Alberti, J. M., 1984, "Large Plastic Deformation in Polycrystalline Cu and Al at Low Temperature", Ph. D. thesis, University of Navarra, Spain.
31. Les, P., Zehetbauer, M., Rauch, E. F., and Kopacz, I., 1999, "Cold Work Hardening of Al From Shear Deformation up to Large Strains", Scr. Mater., 41, pp. 523-528.
32. Rollett, A. D., Kocks, U. F., and Doherty, R. D., 1986, "Stage IV Work Hardening in Cubic Metals", Formability and Metallurgical Structure, A. K. Dachdev and J. D. Embury, eds., The Metallurgical Society, TMS-AIME, Warrendale, PA, pp. 211-225.
33. Chakkingal, U., Suriadi, A. B., and Thompson, P. F., 1998, "Microstructure Development During Equal Channel Angular Drawing of Al at Room Temperature", Scr. Mater., 39, pp. 677-684.
34. Chakkingal, U., Suriadi, A. B., and Thompson, P. F., 1999, "The Development of Microstructure and the Influence of Processing Route During Equal Channel Angular Drawing of Pure Aluminum", Mater. Sci. Eng., A., 266, pp. 241-249.
35. Alkorta, J., Rombouts, M., De Messemaeker, J., Froyen, L., and Gil Sevillano, J., 2002, "On the Impossibility of Multi-Pass Equal-Channel Angular Drawing", Scr. Mater., 47, pp. 13-18.
36. Agnew, S. R., Kocks, U. F., Hartwig, K. T., and Weertman, J. R., 1998, "Texture Evolution During Equal Channel Angular Forging and Dislocation Boundary Misorientations After Severe Plastic Deformation", Proceedings of the 19th Risø Symposium on Materials Science: Modelling of Structure and Mechanics of Materials From Microscale to Product, J. V. Cartensen, T Leffers, T. Lorentzen, O. B. Pedersen, B. F. Sorensen, and G. Winther, eds., Risø National Laboratory, Roskilde, Denmark, pp. 201-206.
37. Zhu, Y. T., and Lowe, T. C., 2000, "Observations and Issues on Mechanisms of Grain Refinement During ECAP Process", Mater. Sci. Eng., A., 291, pp. 46-53.
38. Huang, W. H., Chang, L., Kao, P. W., and Chang, C. P., 2001, "Effect of Die Angle on the Deformation Texture of Copper Processed by Equal Channel Angular Extrusion", Mater. Sci. Eng., A., 307, pp. 113-118.
39. Kopacz, I., Zehetbauer, M., Toth, L. S., Alexandrov, I. V., and Ortner, B., 2001, "Texture Development and Simulation in Copper During Route B-Equal Channel Angular Pressing", Proceedings of the 22nd Risø Symposium on Materials Science: Science of Metastable and Nanocrystalline Alloys, Structure, Properties and Modelling, A. R. Dinesen, M. Eldrup, D. Juul Jensen, S. Linderoth, T. B. Pedersen, N. H. Pryds, A. Schroder Pedersen, and J. A. Wert, eds., Risø National Laboratory, Roskilde, Denmark, pp. 295-300.
40. Gholinia, A., Bate, P., and Prangnell, P. B., 2002, "Modelling Texture Development During Equal Channel Angular Extrusion of Aluminium", Acta Mater., 50, pp. 2121-2136.
41. Dupuy, L., and Rauch, E. F., 2002, "Deformation Paths Related to Equal Channel Angular Extrusion", Mater. Sci. Eng., A., 337, pp. 241-247.
42. Canova, G. R., Kocks, U. F., and Jonas, J. J., 1984, "Theory of Torsion Texture Development", Acta Metall., 32, pp. 211-226.
43. Rauch, E. F., and Dupuy, L., 2004, "Textural Evolution During Equal Channel Angular Extrusion Versus Planar Simple Shear", Proceedings- NANOSPD2, Vienna, Austria, Dec. 9-13, M. J. Zehetbauer and R. Z. Valiev, eds., Wiley VCH, Weinheim, Germany, pp. 296-653.
44. Toth, L. S., Arruffat-Massion, R., Germain, L., Baik, S. C., and Suwas, S., 2004, "Analysis of Texture Evolution in Equal Channel Angular Extrusion of Copper Using a New Flow Field", Acta Mater., 52, pp. 1885-1898.
45. Rauch, E. F., and Dupuy, L., 2005, "Rapid Spot Diffraction Patterns Identification Through Template Matching", Arch. Metall. Mater., 50, pp. 87-99.
46. Rauch, E. F., and Duft, A., 2005, "Orientation Maps Derived From TEM Diffraction Patterns Collected With an External CCD Camera", Mater. Sci. Forum, 495-497, pp. 197-202.
47. Rauch, E. F., and Veron, M., 2005, "Coupled Microstructural Observations and Local Texture Measurements With an Automated Crystallographic Orientation Mapping Tool Attached to a TEM", Materialwiss. Werkstofftech., 36, pp. 552-556.
48. Mecking, H., and Kocks, U. F., 1981, "Kinetics of Flow and Strain-Hardening", Acta Metall., 29, pp. 1865-1875.
49. Mecking, H., and Estrin, Y., 1987, "Microstructure-Related Constitutive Modelling of Plastic Deformation", Constitutive Relations and Their Physical Basis, Proceedings of the Eighth Riso International Symposium on Materials Science, S. I. Andersen, J. B. Bilde-Sorensen, N. Hansen, T. Leffers, H. Lilholt, O. B. Pedersen, and B. Ralph, eds., Risø National Laboratory, Roskilde, Denmark, pp. 125-146.
50. Schroter, W., and Siethoff, H., 1984, "New Phenomena in the Plasticity of Semiconductors and FCC Metals at High Temperatures. II. Analysis of Experimental Data", Z. Metallk., 75, pp. 482-91. (Pubitemid 14652966)
51. Spitzig, W. A., and Krotz, P. D., 1987, "A Comparison of the Strength and Microstructure of Heavily Cold Worked Cu-20% Nb Composites Formed by Different Melting Procedures", Scr. Metall., 21, pp. 1143-1146.
52. Rauch, E. F., 1997, "The Stresses and Work Hardening Rates of Mild Steel With Different Dislocation Patterns", Mater. Sci. Eng., A., 234-236, pp. 653-656.
53. Argon, A. S., and Haasen, P., 1993, "A New Mechanism of Work Hardening in the Late Stages of Large Plastic Flow in F. C. C. and Diamond Cubic Crystals", Acta Metall. Mater., 41, pp. 3289-3306.