-
1
-
-
0032864866
-
A method for characterizing longitudinal chromatic aberration of microscope objectives using a confocal optical system
-
DOI 10.1046/j.1365-2818.1999.00488.x
-
Juskaitis R and Wilson T 1999 A method for characterizing longitudinal chromatic aberration of microscope objectives using a confocal optical system J. Microsc. 195 17-22 (Pubitemid 29333852)
-
(1999)
Journal of Microscopy
, vol.195
, Issue.1
, pp. 17-22
-
-
Juskaitis, R.1
Wilson, T.2
-
2
-
-
60949106510
-
Chromatic aberration measurement for transmission interferometric testing
-
Seong K B and Greivenkamp J E 2008 Chromatic aberration measurement for transmission interferometric testing Appl. Opt. 47 6508-11
-
(2008)
Appl. Opt.
, vol.47
, pp. 6508-6511
-
-
Seong, K.B.1
Greivenkamp, J.E.2
-
3
-
-
10044223437
-
Temporal van Cittert-Zernike theorem and its application to the measurement of chromatic dispersion
-
Dorrer C 2004 Temporal van Cittert-Zernike theorem and its application to the measurement of chromatic dispersion J. Opt. Soc. Am. B 21 1417-23
-
(2004)
J. Opt. Soc. Am. B
, vol.21
, pp. 1417-1423
-
-
Dorrer, C.1
-
4
-
-
13544260768
-
Ocular aberrations as a function of wavelength in the near infrared measured with a femtosecond laser
-
DOI 10.1364/OPEX.13.000400
-
Fernndez E, Unterhuber A, Prieto P, Hermann B, Drexler W and Artal P 2005 Ocular aberrations as a function of wavelength in the near infrared measured with a femtosecond laser Opt. Express 13 400-9 (Pubitemid 40224913)
-
(2005)
Optics Express
, vol.13
, Issue.2
, pp. 400-409
-
-
Fernandez, E.J.1
Unterhuber, A.2
Prieto, P.M.3
Hermann, B.4
Drexler, W.5
Artal, P.6
-
5
-
-
0000589829
-
Control of chromatic focal shift through wave-front coding
-
Wach H B, Dowski E R jr and Thomas Cathey W 1998 Control of chromatic focal shift through wave-front coding Appl. Opt. 37 5359-67 (Pubitemid 128659348)
-
(1998)
Applied Optics
, vol.37
, Issue.23
, pp. 5359-5367
-
-
Wach, H.B.1
Dowski Jr., E.R.2
Thomas Cathey, W.3
-
6
-
-
0034536588
-
An efficient algorithm for measurement and correction of chromatic aberrations in fluorescence microscopy
-
DOI 10.1046/j.1365-2818.2000.00754.x
-
Kozubek M and Matula P 2000 An efficient algorithm for measurement and correction of chromatic aberrations in fluorescence microscopy J. Microsc. 200 206-17 (Pubitemid 32009550)
-
(2000)
Journal of Microscopy
, vol.200
, Issue.3
, pp. 206-217
-
-
Kozubek, M.1
Matula, P.2
-
7
-
-
79955805391
-
Correcting axial chromatic aberration in a fixed focal plane, near-infrared imaging system
-
(July 2006) (CSBE)
-
Wang W B, Morrison J and Paliwal J 2006 Correcting axial chromatic aberration in a fixed focal plane, near-infrared imaging system Canadian Society of Bioengineering Ann. Conf. (July 2006) Paper No 06-127 (CSBE)
-
(2006)
Canadian Society of Bioengineering Ann. Conf.
-
-
Wang, W.B.1
Morrison, J.2
Paliwal, J.3
-
8
-
-
0010055076
-
Apochromatic color correction using liquid lenses
-
Sigler R D 1990 Apochromatic color correction using liquid lenses Appl. Opt. 29 2451-9
-
(1990)
Appl. Opt.
, vol.29
, pp. 2451-2459
-
-
Sigler, R.D.1
-
9
-
-
35348973032
-
Design of spherically corrected, achromatic variable-focus liquid lenses
-
DOI 10.1364/OE.15.014146
-
Reichelt S and Zappe H 2007 Design of spherically corrected, achromatic variable-focus liquid lenses Opt. Express 15 14146-54 (Pubitemid 47608624)
-
(2007)
Optics Express
, vol.15
, Issue.21
, pp. 14146-14154
-
-
Reichelt, S.1
Zappe, H.2
-
10
-
-
0001644030
-
Hybrid diffractive-refractive lenses and achromats
-
Stone T and George N 1988 Hybrid diffractive-refractive lenses and achromats Appl. Opt. 27 2960-71
-
(1988)
Appl. Opt.
, vol.27
, pp. 2960-2971
-
-
Stone, T.1
George, N.2
-
11
-
-
0001604469
-
Diffractive lenses for chromatic confocal imaging
-
Dobson S L, Sun P C and Fainman Y 1997 Diffractive lenses for chromatic confocal imaging Appl. Opt. 36 4744-8 (Pubitemid 127615607)
-
(1997)
Applied Optics
, vol.36
, Issue.20
, pp. 4744-4748
-
-
Dobson, S.L.1
Sun, P.-C.2
Fainman, Y.3
-
12
-
-
0031527309
-
Simultaneous correction of spherical and chromatic aberrations with an electron mirror: An electron optical achromat
-
Rempfer G F, Desloge D M, Skoczylas W P and Griffith O H 1997 Simultaneous correction of spherical and chromatic aberrations with an electron mirror: an electron optical achromat Microsc. Microanal. 3 14-27
-
(1997)
Microsc. Microanal.
, vol.3
, pp. 14-27
-
-
Rempfer, G.F.1
Desloge, D.M.2
Skoczylas, W.P.3
Griffith, O.H.4
-
13
-
-
84975553119
-
The design of superachromatic lenses
-
Herzberger M and McClure N R 1963 The design of superachromatic lenses Appl. Opt. 2 553-60
-
(1963)
Appl. Opt.
, vol.2
, pp. 553-560
-
-
Herzberger, M.1
McClure, N.R.2
-
14
-
-
0033900897
-
Confocal principle for macro-and microscopic surface and defect analysis
-
Tiziani H J, Wegner M and Steudle D 2000 Confocal principle for macro-and microscopic surface and defect analysis Opt. Eng. 39 32
-
(2000)
Opt. Eng.
, vol.39
, pp. 32
-
-
Tiziani, H.J.1
Wegner, M.2
Steudle, D.3
-
15
-
-
0027342114
-
Impact of chromatic and spherical aberration on the focusing of ultrashort light pulses by lenses
-
Kempe M and Rudolph W 1993 Impact of chromatic and spherical aberration on the focusing of ultrashort light pulses by lenses Opt. Lett. 18 137-9
-
(1993)
Opt. Lett.
, vol.18
, pp. 137-139
-
-
Kempe, M.1
Rudolph, W.2
-
16
-
-
84975557373
-
Scaling laws for lens systems
-
Lohmann A W 1989 Scaling laws for lens systems Appl. Opt. 28 4996-8
-
(1989)
Appl. Opt.
, vol.28
, pp. 4996-4998
-
-
Lohmann, A.W.1
-
17
-
-
4243275545
-
Achromatic lens systems for near infrared instruments. II. Performances and limitations of standard Flint glasses
-
Oliva E and Gennari S 1998 Achromatic lens systems for near infrared instruments II. Performances and limitations of standard Flint glasses A&A Suppl. Ser. 128 599-603 (Pubitemid 128756849)
-
(1998)
Astronomy and Astrophysics Supplement Series
, vol.128
, Issue.3
, pp. 599-603
-
-
Oliva, E.1
Gennari, S.2
-
18
-
-
84975635998
-
Aspherical lenses produced by a fast high-precision replication process using UV-curable coatings
-
Zwiers R J M and Dortant G C M 1985 Aspherical lenses produced by a fast high-precision replication process using UV-curable coatings Appl. Opt. 24 4483-8
-
(1985)
Appl. Opt.
, vol.24
, pp. 4483-4488
-
-
Zwiers, R.J.M.1
Dortant, G.C.M.2
-
19
-
-
55149098956
-
Fabrication of hybrid microoptics using UV imprinting process with shrinkage compensation method
-
Lim J S, Choi M S, Kim H K and Kang S 2008 Fabrication of hybrid microoptics using UV imprinting process with shrinkage compensation method Japan. J. Appl. Phys. 47 6719-22
-
(2008)
Japan. J. Appl. Phys.
, vol.47
, Issue.8
, pp. 6719-6722
-
-
Lim, J.S.1
Choi, M.S.2
Kim, H.K.3
Kang, S.4
-
20
-
-
0142247565
-
Influence of the reaction mechanism on the shape accuracy of optical components obtained by photoreplication
-
DOI 10.1002/app.12875
-
Verstegen E J K, Faasen J H P, Stapert H R, Duineveld P C and Kloosterboer J G 2003 Influence of the reaction mechanism on the shape accuracy of optical components obtained by photoreplication J. Appl. Polym. Sci. 90 2364-76 (Pubitemid 37313759)
-
(2003)
Journal of Applied Polymer Science
, vol.90
, Issue.9
, pp. 2364-2376
-
-
Verstegen, E.J.K.1
Faasen, J.H.P.2
Stapert, H.R.3
Duineveld, P.C.4
Kloosterboer, J.G.5
-
21
-
-
33750310746
-
Development of a compression molding process for three-dimensional tailored free-form glass optics
-
DOI 10.1364/AO.45.006511
-
Yi A Y et al 2006 Development of a compression molding process for three-dimensional tailored free-form glass optics Appl. Opt. 45 6511-8 (Pubitemid 44621225)
-
(2006)
Applied Optics
, vol.45
, Issue.25
, pp. 6511-6518
-
-
Yi, A.Y.1
Huang, C.2
Klocke, F.3
Brecher, C.4
Pongs, G.5
Winterschladen, M.6
Demmer, A.7
Lange, S.8
Bergs, T.9
Merz, M.10
Niehaus, F.11
-
22
-
-
0004282609
-
-
(Boca Raton, FL: CRC Press)
-
Laikin M c2007 Lens Design (Boca Raton, FL: CRC Press)
-
(2007)
Lens Design
-
-
Laikin, M.1
-
23
-
-
27844450369
-
Precision compression molding of glass microlenses and microlens arrays - An experimental study
-
DOI 10.1364/AO.44.006115
-
Firestone G C and Yi A Y 2005 Precision compression molding of glass microlenses and microlens arrays-an experimental study Appl. Opt. 44 6115-22 (Pubitemid 41639919)
-
(2005)
Applied Optics
, vol.44
, Issue.29
, pp. 6115-6122
-
-
Firestone, G.C.1
Yi, A.Y.2
-
24
-
-
22144476146
-
Design and fabrication of a microlens array by use of a slow tool servo
-
DOI 10.1364/OL.30.001707
-
Yi A Y and Li L 2005 Design and fabrication of a microlens array by use of a slow tool servo Opt. Lett. 30 1707-9 (Pubitemid 40972048)
-
(2005)
Optics Letters
, vol.30
, Issue.13
, pp. 1707-1709
-
-
Yi, A.Y.1
Li, L.2
-
25
-
-
38849175460
-
Design of protective coatings for glass lens molding
-
Ma K J, Chien H H, Chuan W H, Chao C L and Hwang K C 2008 Design of protective coatings for glass lens molding Key Eng. Mater. 366 655-61 (Pubitemid 351205037)
-
(2008)
Key Engineering Materials
, vol.364-366 II
, pp. 655-661
-
-
Ma, K.J.1
Chien, H.H.2
Chuan, W.H.3
Chao, C.L.4
Hwang, K.C.5
-
27
-
-
79955804405
-
-
Kuribayashi K, Sakai M, Monji H, Aoki M, Okinaka H and Torii H 1987 Mold for press-molding glass optical elements and a molding method using the same US Patent 4685948 Matsushita http://www.patents.com/us-4685948.html
-
(1987)
Mold for Press-molding Glass Optical Elements and A Molding Method Using the Same
-
-
Kuribayashi, K.1
Sakai, M.2
Monji, H.3
Aoki, M.4
Okinaka, H.5
Torii, H.6
-
29
-
-
77955544071
-
Comparison of nitride and noble metal coatings for precision glass molding tools
-
Klocke F, Dambon O and Georgiadis K 2010 Comparison of nitride and noble metal coatings for precision glass molding tools Key Eng. Mater. 438 9-16
-
(2010)
Key Eng. Mater.
, vol.438
, pp. 9-16
-
-
Klocke, F.1
Dambon, O.2
Georgiadis, K.3
-
30
-
-
27844470886
-
Compression molding of aspherical glass lenses - A combined experimental and numerical analysis
-
DOI 10.1111/j.1551-2916.2005.00137.x
-
Yi A Y and Jain A 2005 Compression molding of aspherical glass lenses-a combined experimental and numerical analysis J. Am. Ceram. Soc. 88 579-86 (Pubitemid 43026523)
-
(2005)
Journal of the American Ceramic Society
, vol.88
, Issue.3
, pp. 579-586
-
-
Yi, A.Y.1
Jain, A.2
-
31
-
-
55149116332
-
Numerical simulation and experimental study of residual stresses in compression molding of precision glass optical components
-
Chen Y, Su L J, Yi A Y, Klocke F and Pongs G 2008 Numerical simulation and experimental study of residual stresses in compression molding of precision glass optical components Trans. ASME, J. Manuf. Sci. Eng. 130 051012-9
-
(2008)
Trans. ASME, J. Manuf. Sci. Eng.
, vol.130
, pp. 051012-051019
-
-
Chen, Y.1
Su, L.J.2
Yi, A.Y.3
Klocke, F.4
Pongs, G.5
-
32
-
-
33748783384
-
g optical glass
-
DOI 10.1088/0960-1317/16/10/012, PII S0960131706224847, 012
-
g optical glass J. Micromech. Microeng. 16 2000-5 (Pubitemid 44403647)
-
(2006)
Journal of Micromechanics and Microengineering
, vol.16
, Issue.10
, pp. 2000-2005
-
-
Yi, A.Y.1
Chen, Y.2
Klocke, F.3
Pongs, G.4
Demmer, A.5
Grewell, D.6
Benatar, A.7
-
33
-
-
20644461487
-
Precision laboratory apparatus for high temperature compression molding of glass lenses
-
Firestone G C, Jain A and Yi A Y 2005 Precision laboratory apparatus for high temperature compression molding of glass lenses Rev. Sci. Instrum. 76 063101-8
-
(2005)
Rev. Sci. Instrum.
, vol.76
, pp. 063101-063108
-
-
Firestone, G.C.1
Jain, A.2
Yi, A.Y.3
-
34
-
-
77956444354
-
Investigation of the effects of process parameters on the glass-to-mold sticking force during precision glass molding
-
Fischbacha K D, Georgiadisb K, Wangb F, Dambonb O, Klockeb F, Chena Y and Yi A Y 2010 Investigation of the effects of process parameters on the glass-to-mold sticking force during precision glass molding Surf. Coat. Technol. 205 312-9
-
(2010)
Surf. Coat. Technol.
, vol.205
, pp. 312-319
-
-
Fischbacha, K.D.1
Georgiadisb, K.2
Wangb, F.3
Dambonb, O.4
Klockeb, F.5
Chena, Y.6
Yi, A.Y.7
-
35
-
-
48949097482
-
Refractive index variation in compression molding of precision glass optical lenses
-
Su L J, Chen Y, Yi A Y, Klocke F and Pongs G 2008 Refractive index variation in compression molding of precision glass optical lenses Appl. Opt. 47 1662-7
-
(2008)
Appl. Opt.
, vol.47
, pp. 1662-1667
-
-
Su, L.J.1
Chen, Y.2
Yi, A.Y.3
Klocke, F.4
Pongs, G.5
-
36
-
-
0015143370
-
A model of structural relaxation in glass
-
Narayanaswamy O S 1971 A model of structural relaxation in glass J. Am. Ceram. Soc. 54 491-8
-
(1971)
J. Am. Ceram. Soc.
, vol.54
, pp. 491-498
-
-
Narayanaswamy, O.S.1
-
37
-
-
0036502497
-
Hot embossing in microfabrication. Part II: Rheological characterization and process analysis
-
DOI 10.1002/pen.10971
-
Juang Y-J, Lee L J and Koelling K W 2002 Hot embossing in microfabrication. Part II: rheological characterization and process analysis Polym. Eng. Sci. 42 551-66 (Pubitemid 34269238)
-
(2002)
Polymer Engineering and Science
, vol.42
, Issue.3
, pp. 551-566
-
-
Juang, Y.-J.1
Lee James, L.2
Koelling, K.W.3
-
39
-
-
78249231714
-
Optimization of compression molding of stand-alone microlenses: Simulation and experimental results
-
Mirkhalaf M, Tor S B, Murukeshan V M, Loh N H and Lye S W 2010 Optimization of compression molding of stand-alone microlenses: simulation and experimental results Polym. Eng. Sci. 50 2216-28
-
(2010)
Polym. Eng. Sci.
, vol.50
, pp. 2216-2228
-
-
Mirkhalaf, M.1
Tor, S.B.2
Murukeshan, V.M.3
Loh, N.H.4
Lye, S.W.5
-
40
-
-
38349160167
-
Optimization of control parameters in micro hot embossing
-
He Y, Fu J Z and Chen Z C 2008 Optimization of control parameters in micro hot embossing Microsyst. Technol. 14 325-9
-
(2008)
Microsyst. Technol.
, vol.14
, pp. 325-329
-
-
He, Y.1
Fu, J.Z.2
Chen, Z.C.3
|