A state-of-the-art review on the effects of particulate contamination and related topics in machine-element contacts

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 224, Issue 5, 2010, Pages 453-479

  Nikas, G K ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

Contamination; Debris; Lubricant; Particle; Wear

Indexed keywords

CATASTROPHIC FAILURES; DEBRIS PARTICLES; INDUSTRIAL SECTOR; LIFE EXPECTANCIES; MACHINE RELIABILITY; MECHANICAL SYSTEMS; NANOMETRES; ON-MACHINES; OPERATING CONDITION; PARTICLE; PARTICULATE CONTAMINATION; SOLID PARTICLES; STATE-OF-THE-ART REVIEWS; THEORETICAL STUDY; WEAR;

AIR ENTRAINMENT; CONTAMINATION; DEBRIS; MECHANICAL PROPERTIES; SOLID LUBRICANTS;

ENGINEERING RESEARCH;

EID: 79955462764     PISSN: 13506501     EISSN: 2041305X     Source Type: Journal    
DOI: 10.1243/13506501JET752     Document Type: Review

References (234)

1. Nikas, G. K. Review of studies on the detrimental effects of solid contaminants in lubricated machine element contacts. In Reliability engineering advances (Ed. G. I. Hayworth), 2009, pp. 1-44 (Nova Science Publishers, New York, USA).
2. Dwyer-Joyce, R. S. The effects of lubricant contamination on rolling bearing performance. PhD Thesis, Department of Mechanical Engineering, Imperial College London, UK, 1993.
3. Nikas, G. K. Theoretical modelling of the entrainment and thermomechanical effects of contamination particles in elastohydrodynamic contacts. PhD Thesis, Department of Mechanical Engineering, Imperial College London, UK, 1999.
4. McKee, S. A. Effect of abrasive in lubricant. SAE Trans., 1927, 22, 73-77.
5. Dwyer-Joyce, R. S., Sayles, R. S., and Ioannides, E. An investigation into the mechanisms of closed three-body abrasive wear.Wear, 1994, 175(1-2), 133-142. (Pubitemid 282317)
6. Leonardo da Vinci. Codex Madrid I, 1493, p. 119. (McGraw Hill, Switzerland), available from: http://kmoddl.library.cornell.edu/ebooks/ #leonardol
7. Hamer, J. C., Sayles, R. S., and Ioannides, E. Deformation mechanisms and stresses created by 3rd body debris contacts and their effects on rolling bearing fatigue. In Proceedings of the 14th Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, Lyon, France, 1987, vol. 12, pp. 201-208.
8. Hamer, J. C., Sayles, R. S., and Ioannides, E. Particle deformation and counterface damage when relatively soft particles are squashed between hard anvils. STLE Tribol. Trans., 1989, 32(3), 281-288.
9. Ville, F. and Nelias, D. Influence of the nature and size of solid particles on the indentation features in EHL contacts. In Proceedings of the 24th Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, London, UK, 1997, vol. 34, pp. 399-409.
10. Ville, F. and Nelias, D. An experimental study of the concentration and shape of dents caused by spherical metallic particles in EHL contacts. STLE Tribol. Trans., 1999, 42(1), 231-240. (Pubitemid 29353289)
11. Ko, C. N. and Ioannides, E. Debris denting - the associated residual stresses and their effect on the fatigue life of rolling bearings: an FEM analysis. In Tribological design of machine elements (Eds D. Dowson, C. M. Taylor, M. Godet, and D. Berthe), 1989, pp. 199-207 (Elsevier, Amsterdam, The Netherlands).
12. Kang, Y. S., Sadeghi, F., and Hoeprich, M. R. A finite element model for spherical debris denting in heavily loaded contacts. ASME J. Tribol., 2004, 126(1), 71-80. (Pubitemid 38242301)
13. Antaluca, E. and Nélias, D. Contact fatigue analysis of a dented surface in a dry elastic-plastic circular point contact. Tribol. Lett., 2008, 29(2), 139-153.
14. Larsen-Badse, J. Influence of grit size on the groove formation during sliding abrasion. Wear, 1968, 11(3), 213-222.
15. Larsen-Badse, J. Influence of grit diameter and specimen size on wear during sliding abrasion.Wear, 1968, 12(1), 35-53.
16. Rabinowicz, E. and Mutis, A. Effect of abrasive particle size on wear.Wear, 1965, 8(5), 381-390.
17. Richardson, R. C. D. The wear of metals by relatively soft abrasives.Wear, 1968, 11(4), 245-275.
18. Xuan, J. L., Hong, I. T., and Fitch, E. C. Hardness effect on three-body abrasive wear under fluid film lubrication. ASME J. Tribol., 1989, 111(1), 35-40.
19. Williams, J. A. and Hyncica, A. M. Abrasive wear in lubricated contacts. J. Phys. D Appl. Phys., 1992, 25(1A), 81-90.
20. Hamilton, R. W., Sayles, R. S., and Ioannides, E. Wear due to debris particles in rolling bearing contacts. In Proceedings of the 24th Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, London, UK, 1997, vol. 34, pp. 87-93.
21. Dwyer-Joyce, R. S. Predicting the abrasive wear of ball bearings by lubricant debris.Wear, 1999, 233-235, 692-701. (Pubitemid 30087070)
22. Grieve, D. G., Dwyer-Joyce, R. S., and Beynon, J. H. Abrasive wear of railway track by solid contaminants. Proc. IMechE, Part F: J. Rail and Rapid Transit, 2001, 215(3), 193-205. DOI: 10.1243/0954409011531512. (Pubitemid 34459403)
23. Nilsson, R., Dwyer-Joyce, R. S., and Olofsson, U. Abrasive wear of rolling bearings by lubricant borne particles. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(5), 429-439. DOI: 10.1243/13506501J00205. (Pubitemid 44514897)
24. Wan, G. T. Y. and Spikes, H. A. The behaviour of suspended solid particles in rolling and sliding elastohydrodynamic contacts. STLE Tribol. Trans., 1987, 31(1), 12-21. (Pubitemid 18606075)
25. Nikas, G. K. Particle entrainment in elastohydrodynamic point contacts and related risks of oil starvation and surface indentation. ASME J. Tribol., 2002, 124(3), 461-467. (Pubitemid 34792347)
26. Enthoven, J. C. and Spikes, H. A. Visual observation of the process of scuffing. In Proceedings of the 21st Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, Leeds, UK, 1994, vol. 30, pp. 487-494.
27. Nikas, G. K., Sayles, R. S., and Ioannides, E. Effects of debris particles in sliding/rolling elastohydrodynamic contacts. Proc. IMechE, Part J: J. Engineering Tribology, 1998, 212(5), 333-343. DOI: 10.1243/ 1350650981542146. (Pubitemid 29033271)
28. Sato, H., Tokuoka, N., Yamamoto, H., and Sasaki, M. Study of wear mechanism by soot contaminated in engine oil. SAE paper 1999-01-3573, 1999.
29. Green, D. A., Lewis, R., and Dwyer-Joyce, R. S. The wear effects and mechanisms of soot contaminated automotive lubricants. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(3), 159-169. DOI: 10.1243/13506501JET140. (Pubitemid 44964847)
30. Green, D. A. and Lewis, R. The effects of sootcontaminated engine oil on wear and friction: a review. Proc. IMechE, Part D: J. Automobile Engineering, 2008, 222(9), 1669-1689. DOI: 10.1243/09544070JAUTO468.
31. Chandrasekaran, S., Khemchandani, M. V., and Sharma, J. P. Effect of abrasive contaminants on scuffing. Tribol. Int., 1985, 18(4), 219-222.
32. Khonsari, M. M. and Wang, S. H. On the role of particulate contamination in scuffing failure. Wear, 1990, 137(1), 51-62. (Pubitemid 20694689)
33. Khonsari, M. M., Pascovici, M. D., and Kucinschi, B. V. On the scuffing failure of hydrodynamic bearings in the presence of an abrasive contaminant. ASME J. Tribol., 1999, 121(1), 90-96. (Pubitemid 29311828)
34. Nikas, G. K., Ioannides, E., and Sayles, R. S. Thermal modelling and effects from debris particles in sliding/ rolling EHD line contacts - a possible local scuffing mode. ASME J. Tribol., 1999, 121(2), 272-281. (Pubitemid 32262775)
35. Nikas, G. K., Sayles, R. S., and Ioannides, E. Thermoelastic distortion of EHD line contacts during the passage of soft debris particles.ASME J. Tribol., 1999, 121(2), 265-271. (Pubitemid 32262776)
36. Nikas, G. K. An advanced model to study the possible thermomechanical damage of lubricated sliding- rolling line contacts from soft particles. ASME J. Tribol., 2001, 123(4), 828-841. (Pubitemid 33023747)
37. Mizuhara, K., Tomimoto, M., and Yamamoto, T. Effect of particles on lubricated friction. STLE Tribol. Trans., 2000, 43(1), 51-56. (Pubitemid 32213226)
38. Tomimoto, M.,Mizuhara, K., and Yamamoto, T. Effect of particles on lubricated friction - theoretical analysis of friction caused by particles in journal bearing. STLE Tribol. Trans., 2002, 45(1), 47-54.
39. Tomimoto, M.,Mizuhara, K., and Yamamoto, T. Effect of particles on lubricated friction - verification of dead time phenomenon and friction theory. STLE Tribol. Trans., 2002, 45(1), 94-102.
40. Moon, M. How clean are your lubricants? Trends Food Sci. Technol., 2007, 18(suppl. 1), S74-S88.
41. Masuko, M., Suzuki, A., and Ueno, T. Influence of physical and chemical contaminants on the antiwear performance of model automotive engine oil. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(5), 455-462. DOI: 10.1243/135065005X34053. (Pubitemid 44509276)
42. Yamaguchi, E. S.,Untermann, M., Roby, S. H., Ryason, P. R., and Yeh, S. W. Soot wear in diesel engines. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(5), 463-469. DOI: 10.1243/13506501J00505. (Pubitemid 44509277)
43. Booth, J. E., Nelson, K. D., Harvey, T. J., Wood, R. J. K.,Wang, L., Powrie, H. E. G., and Martinez, J. G. The feasibility of using electrostatic monitoring to identify diesel lubricant additivesandsoot contamination interactions by factorial analysis. Tribol. Int., 2006, 39(12), 1564-1575. (Pubitemid 44233982)
44. Tallian, T. E. Prediction of rolling contact fatigue life in contaminated lubricant, part II: experimental. ASME J. Lubr. Technol., 1976, 98(3), 384-392.
45. Loewenthal, S. H. and Moyer, D. W. Filtration effects on ball bearing life and condition in a contaminated lubricant. ASME J. Lubr. Technol., 1979, 101(2), 171-176.
46. Ronen, A., Malkin, S., and Loewy, K. Wear of dynamically loaded hydrodynamic bearings by contaminant particles. ASME J. Lubr. Technol., 1980, 102(4), 452-458. (Pubitemid 11518852)
47. Loewenthal, S. H., Moyer, D. W., and Needelman, W. M. Effects of ultra-clean and centrifugal filtration on rolling-element bearing life. ASME J. Lubr. Technol., 1982, 104(3), 283-291.
48. Hamer, J. C., Lubrecht, A. A., Ioannides, E., and Sayles, R. S. Surface damage on rolling elements and its subsequent effects on performance and life. In Proceedings of the 15th Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, Leeds, UK, 1988, vol. 14, pp. 189-197.
49. Dwyer-Joyce, R. S., Hamer, J. C., Sayles, R. S., and Ioannides, E. Lubricant screening for debris effects to improve fatigue and wear life. In Proceedings of the 18th Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, Lyon, France, 1991, vol. 21, pp. 57-63.
50. Nixon, H. P. and Zantopulos, H. Fatigue life performance comparisons of tapered roller bearings with debris-damaged raceways. STLE Lubr. Eng., 1995, 51(9), 732-736.
51. Chao, K. K., Saba, C. S., and Centers, P. W. Effects of lubricant borne solid debris in rolling surface contacts. STLE Tribol. Trans., 1996, 39(1), 13-22.
52. Ville, F. and Nelias,D. Early fatigue failure due to dents in EHL contacts. STLE Tribol. Trans., 1999, 42(4), 795-800. (Pubitemid 30001225)
53. Kahlman, L. and Hutchings, I. M. Effect of particulate contamination in grease-lubricated hybrid rolling bearings. STLE Tribol. Trans., 1999, 42(4), 842-850. (Pubitemid 30001231)
54. Nelias, D. and Ville, F. Detrimental effects of debris dents on rolling contact fatigue. ASME J. Tribol., 2000, 122(1), 55-64. (Pubitemid 30247548)
55. Ai, X. Effect of debris contamination on the fatigue life of roller bearings. Proc. IMechE, Part J: J. Engineering Tribology, 2001, 215(6), 563-575. DOI: 10.1243/ 1350650011543808. (Pubitemid 34128787)
56. Nilsson, R., Olofsson, U., and Sundvall, K. Filtration and coating effects on self-generated particle wear in boundary lubricated roller bearings. Tribol. Int., 2005, 38(2), 145-150.
57. Xu, G., Sadeghi, F., and Cogdell, J. D. Debris denting effects on elastohydrodynamic lubricated contacts. ASME J. Tribol., 1997, 119(3), 579-587.
58. Xu, G., Sadeghi, F., and Hoeprich, M. Residual stresses due to debris effects in EHL contacts. STLE Tribol. Trans., 1997, 40(4), 613-620.
59. Tallian, T. E. Prediction of rolling contact fatigue life in contaminated lubricant, part I: mathematical model. ASME J. Lubr. Technol., 1976, 98(2), 251-257.
60. Lubrecht, A. A., Dwyer-Joyce, R. S., and Ioannides, E. Analysis of the influence of indentations on contact life. In Proceedings of the 18th Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, Lyon, France, 1991, vol. 21, pp. 173-181.
61. Sayles, R. S. and Ioannides,E.Debris damage in rolling bearings and its effects on fatigue life. ASME J. Tribol., 1988, 110(1), 26-31. (Pubitemid 18567924)
62. Sayles, R. S., Hamer, J. C., and Ioannides, E. The effects of particulate contamination in rolling bearings - a state of the art review. Proc. IMechE, Part G: J. Aerospace Engineering, 1990, 204(1), 29-36. DOI: 10.1243/PIME-PROC- 1990-204-206-02.
63. Sayles, R. S. Debris and roughness in machine element contacts: some current and future engineering implications. Proc. IMechE, Part J: J. Engineering Tribology, 1995, 209(J3), 149-172. DOI: 10.1243/PIME-PROC-1995-209- 421-02.
64. Dwyer-Joyce, R. S. The life cycle of a debris particle. In Proceedings of the 31st Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, Leeds, UK, 2004, vol. 48, pp. 681-690.
65. Khonsari, M. M. and Booser, E. R. Effect of contamination on the performance of hydrodynamic bearings. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(5), 419-428. DOI: 10.1243/13506501J00705. (Pubitemid 44509274)
66. SKF Maintenance Products B.V. Oil cleanliness control course. In Notes of the Seminar, 9-13 September 1991, SKF-ERC, The Netherlands.
67. Kjer, T. Particles in new motor oils. Wear, 1981, 69(3), 395-396.
68. Jones, M. H.Wear debris associated with diesel engine operation.Wear, 1983, 90(1), 75-88. (Pubitemid 14474090)
69. Leng, J. A. and Davies, J. E. Ferrographic examination of unused lubricants for diesel engines. Wear, 1988, 122(1), 115-119. (Pubitemid 18575009)
70. Stachowiak, G. W., Kirk, T. B., and Stachowiak, G. B. Ferrography and fractal analysis of contamination particles in unused lubricating oils. Tribol. Int., 1991, 24(6), 329-334.
71. Glaeser, W. A. Wear debris classification. In Modern tribology handbook (Ed. B. Bhushan), 2001, vol. 1, pp. 301-315 (CRC Press, New York, USA).
72. Roylance, B. J., Williams, J. A., and Dwyer-Joyce, R. Wear debris and associated wear phenomena - fundamental research and practice. Proc. IMechE, Part J: J. Engineering Tribology, 2000, 214(1), 79-105. DOI: 10.1243/1350650001543025.
73. Roylance, B. J. and Hunt, T. M. Wear debris analysis, 1999 (Coxmoor Publishing Company, Oxford, UK).
74. Williams, J. A. Wear and wear particles - some fundamentals. Tribol. Int., 2005, 38(10), 863-870. (Pubitemid 41172489)
75. Barwell, F. T. The role of particle analysis - a review of ferrography. In Proceedings of the 10th Leeds-Lyon Symposium on Tribology (1983), Lyon, UK, 1984, pp. 3- 10, paper I(i) (Butterworth). (Pubitemid 15571515)
76. Roylance, B. J., Albidewi, I. A., Laghari, M. S., Luxmoore, A. R., and Deravi, F. Computer-aided vision engineering (CAVE) - quantification of wear particle morphology. Lubr. Eng., 1994, 50(2), 111-116.
77. Stachowiak, G. W. Numerical characterisation of wear particles morphology and angularity of particles and surfaces. Tribol. Int., 1998, 31(1-3), 139-157. (Pubitemid 34862970)
78. Trevor, M. H. (Ed.) Handbook of wear debris analysis and particle detection in liquids, 1993, English edition (Kluwer Academic Publishers, London, UK).
79. Kowandy, C., Richard, C., Chen, Y.-M., and Tessier, J.-J. Correlation between the tribological behaviour and wear particle morphology - case of grey cast iron 250 versus graphite and PTFE. Wear, 2007, 262(7-8), 996-1006. (Pubitemid 46273566)
80. Roylance, B. J. and Raadnui, S. The morphological attributes of wear particles - their role in identifying wear mechanisms.Wear, 1994, 175(1-2), 115-121. (Pubitemid 282354)
81. Raadnui, S. and Roylance, B. J. The classification of wear particle shape. Lubr. Eng., 1995, 51(5), 432-437.
82. Peng, Z. and Kirk, T. B. Wear particle classification in a fuzzy grey system. Wear, 1999, 225-229(Pt 2), 1238-1247. (Pubitemid 30118719)
83. Bowen, E. R. and Westcott, V. C. Wear particle atlas. Final report to Naval Engineering Centre, Lakehurst, New Jersey, USA, Contract no. 156-74-C-182, 1976.
84. Anderson, D. P. Wear particle atlas (revised). Report NAEC-92-163, Naval Air Engineering Centre, Advanced Technology Office, Support Equipment Engineering Department, Lakehurst, New Jersey, USA, 1982.
85. Khan,M. A., Starr, A. G.,and Cooper,D. A methodology for online wear debris morphology and composition analysis. Proc. IMechE, Part J: J. Engineering Tribology, 2008, 222(J7), 785-796. DOI: 10.1243/13506501JET449.
86. Rigney, D. A. The role of characterization in understanding debris generation. In Proceedings of the 18th Leeds-Lyon Symposium on Tribology, Lyon, France, 1991, pp. 405-412 (Elsevier).
87. Stachowiak, G. P., Podsiadlo, P., and Stachowiak, G.W. Shape and texture features in the automated classification of adhesive and abrasive wear particles. Tribol. Lett., 2006, 24(1), 15-26. (Pubitemid 44712119)
88. Jones Jr,W. R. Spherical artifacts on ferrograms.Wear, 1976, 37(1), 193-195.
89. Rabinowicz, E. The formation of spherical wear particles. Wear, 1977, 42(1), 149-156.
90. Smith,M.C.andSmith,R. A.Theformation of spherical wear debris in mode II fatigue cracks.Wear, 1982, 76(1), 105-128. (Pubitemid 12524376)
91. Balogh, I. The formation of spherical particles under abrasive conditions. Periodica Polytech. Ser.Mech. Eng., 2002, 46(1), 29-35. (Pubitemid 34599359)
92. Gebarin, S. and Fitch, J. Origin of spherical particles in lubricants. Practising Oil Analysis Magazine, March 2005 (Noria Corporation).
93. Loy, B. andMcCallum, R.Mode of formation of spherical particles in rolling contact fatigue.Wear, 1973, 24(2), 219-228.
94. Scott, D. and Mills, G. H. Spherical debris - its occurrence, formation and significance in rolling contact fatigue.Wear, 1973, 24(2), 235-242.
95. Jones, W. R. and Loewenthal, S. H. Analysis of wear debris from full-scale bearing fatigue tests using the ferrograph. ASLE Trans., 1980, 24(3), 323-330.
96. Broszeit, E. and Hess, F. J. Diskussion zu: a scanning electronmicroscope study of fracturephenomenaassociated with rolling contact surface fatigue failure.Wear, 1971, 17(4), 314-315.
97. Odi-Owei, S. and Roylance, B. J. An experimental study of initial scuffing and recovery in sliding wear using a four-ball machine.Wear, 1987, 117(3), 267-287. (Pubitemid 17619458)
98. Jin,Y.andWang,C. Spherical particles generated during the running-in period of a diesel engine. Wear, 1989, 131(2), 315-328.
99. Conor, P. C. and McRobie, D. E.Wear debris generated during high velocity sliding contact.Wear, 1981, 69(2), 189-204. (Pubitemid 12431041)
100. Goss, G. L. and Hoeppner, D. W. Characterization of fretting fatigue damage by SEM analysis. Wear, 1973, 24(1), 77-95.
101. Stowers, I. F. and Rabinowicz, E. Spherical particles formedin the fretting of silver. J. Appl. Phys., 1972, 43(5), 2485-2487.
102. Hurricks, P. L. The occurrence of spherical particles in fretting wear.Wear, 1974, 27(3), 319-328.
103. Komanduri, R. and Shaw, M. C. Formation of spherical particles in grinding. Phil. Mag., 1975, 32(4), 711-724.
104. Kleis, I.,Muiste, U., Pilvre, U., Uuemois, H., and Uetz, H. The physical mechanism of the formation of metal microspheres in the wear process. Wear, 1979, 53(1), 79-85. (Pubitemid 9437531)
105. Doroff, S. W., Miller, R. S., Thiruvengadam, A. P., and Westcott, V. C. Spheroidal particles produced by cavitation erosion. Nature, 1974, 247, 363-364.
106. Patel, M. Influence of oil balls on premature overlay removal of diesel engine connecting rod bearings. SAE paper 810501, 1981 (Society of Automotive Engineers, USA).
107. McGeehan, J. A., Chevron Texaco, and Ryason, P. R. How glycol causes corrosion and oil ball damage - in diesel engines. Practising Oil Analysis Magazine, May 2005 (Noria Corporation).
108. Raadnui, S.Wear particle analysis - utilization of quantitative computer image analysis: a review. Tribol. Int., 2005, 38(10), 871-878. (Pubitemid 41172490)
109. Jin,Y. andYang, Q. Ferrographic analysis of wear debris generated in locomotive diesel engines. Wear, 1984, 93(1), 23-32.
110. Jones,W. R. and Loewenthal, S. H. Ferrographic analysis of wear debris from full-scale bearing fatigue tests. NASA technical paper 1511, September 1979 (USA).
111. Roylance, B. J. Ferrography - then and now. Tribol. Int., 2005, 38(10), 857-862.
112. Beghini,E.,Dwyer-Joyce,R. S., Ioannides,E., Jacobson, B. O., Lubrecht, A. A., and Tripp, J. H. Elastic/plastic contact and endurance life prediction. J. Phys. D: Appl. Phys., 1992, 25(3), 379-383.
113. Eleftherakis, J. G. and Khalil, A. Development of a laboratory test contaminant for transmissions. SAE paper 900561, 1990 (Society of Automotive Engineers, USA).
114. Hutchings, I. M. Tribology - friction and wear of engineering materials, 1992 (Butterworth-Heinemann, Oxford, UK).
115. Sasaki, A. Contaminants in used oils and their problems. Proc.IMechE,Part J: J.EngineeringTribology, 2006, 220(5), 471-478. DOI: 10.1243/135065005X33955. (Pubitemid 44509278)
116. Sasaki, A. Contaminants in used oils and their behaviour. J. ASTM Int., 2009, 6(2), paper JAI101672.
117. Roach, A. E. Performance of oil-film bearings with abrasive containing lubrication. ASME Trans., 1951, 73, 677-686.
118. Rylander, H. G. Effects of solid inclusions in sleevebearing oil supply.Mech. Eng., 1952, 74, 963-966.
119. Broeder, J. J. and Heijnekamp, J. W. Abrasive wear of journal bearings by particles in the oil. Proc. InstnMech. Engrs, 1965-66, 180(3k), 21-31.
120. Hirano, F. and Yamamoto, S. Four-ball test on lubricating oils containing solid particles. Wear, 1959, 2(5), 349-363.
121. Fitzsimmons, B. and Clevenger, H. D. Contaminated lubricants and tapered roller bearingwear. ASLE Trans., 1977, 20(2), 97-107.
122. Ronen, A. and Malkin, S. Wear mechanism of statically loaded hydrodynamic bearings by contaminant abrasive particles.Wear, 1981, 68(3), 371-389. (Pubitemid 12429824)
123. Ronen, A. and Malkin, S. Investigation of friction and wear of dynamically loaded hydrodynamic bearings with abrasive contaminants. J. Lubr. Technol., 1983, 105(4), 559-569.
124. General Motors Corporation. New departure handbook, 7th edition, 1971 (General Motors Corporation, USA).
125. Wedeven, L. D. Diagnostics of wear in aeronautical systems. NASA TM-79185, 1979.
126. Cunningham,J. S. andMorgan,M. A. Review of aircraft bearing rejection criteria and causes. ASLE Lubr. Eng., 1979, 35(8), 435-441. (Pubitemid 9472865)
127. SKF. General catalogue. Catalogue 5000 E, June 2003.
128. Okamoto, J., Fujita, K., and Toshioka,T. Effects of solid particles in oil on the life of ball bearings. J. Mech. Eng. Lab. (Tokyo), 1972, 26(5), 228-238 (NASA technical translation; NASA TT F-15, 653, June 1974).
129. Khorshid,E. A. andNawwar, A. M. A review of the effect of sand dust and filtration on automobile engine wear. Wear, 1991, 141(2), 349-371.
130. Fodor, J. Improving utilisation of potential i.c. engine life by filtration. Tribol. Int., 1979, 12(3), 127-129. (Pubitemid 9469883)
131. Frith, R. H. and Scott, W. Control of solids contamination in hydraulic systems - an overview.Wear, 1993, 165(1), 69-74.
132. Dalal, H., Cotellesse, G., Morrison, F., and Ninos, N. Progression of surface damage in rolling contact fatigue. Final report for SKF Industries Inc., King of Prussia PA Research Lab, February 1974.
133. Bhachu, R. S. The influence of debris on rolling fatigue life. PhD Thesis, University of London, UK, 1980.
134. Sayles, R. S. and Macpherson, P. B. The influence of wear debris on rolling contact fatigue. In Rolling contact fatigue testing in bearing steels, ASTM STP 771, 1982, pp. 255-275 (ASTM, Philadelphia, USA).
135. Webster, M. N., Ioannides, E., and Sayles, R. S. The effect of topographical defects on the contact stress and fatigue life in rolling element bearings. In Proceedings of the 12th Leeds-Lyon Symposium on Tribology (1985), Lyon, France, 1986, pp. 207-221, paper VIII(iii) (Butterworth).
136. Bhachu, R., Sayles, R. S., and Macpherson, P. B. The influence of filtration on rolling element bearing life. In Innovation for maintenance technology improvements (Eds T. R. Shives andW. A.Willard), 1981, pp. 326-347, NBS-SP-640, NASA CR-172821 (USA).
137. Needelman, W. M. and Zaretsky, E. V. Quantifying oil filtration effects on bearing life. NASA technical memorandum 104350, June 1999 (USA).
138. Day, L. The secret's in the filter. Tribol. Lubr. Technol. (STLE), 2008, 64(2), 32-37.
139. Akagaki,T.,Nakamura, M.,Monzen,T., and Kawabata, M. Analysis of the behaviour of rolling bearings in contaminated oil using some condition monitoring techniques. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(5), 447-453. DOI: 10.1243/13506501J00605. (Pubitemid 44514898)
140. Miettinen, J. and Andersson, P. Acoustic emission of rolling bearings lubricated with contaminated grease. Tribol. Int., 2000, 33(11), 777-787.
141. Peng, Z.,Kessissoglou, N. J., and Cox, M. A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques. Wear, 2005, 258(11-12), 1651-1662.
142. Sari,M.R.,Haiahem,A.,andFlamand,L.Effect of lubricant contamination on gear wear. Tribol. Lett., 2007, 27(1), 119-126. (Pubitemid 46870711)
143. Odi-Owei, S. and Roylance, B. J. The effect of solid contamination on the wear and critical failure load in a sliding lubricated contact. Wear, 1986, 112(3-4), 239-255. (Pubitemid 17478377)
144. Day,M. Clarifying the new ISO contamination filtration standards. Practicing Oil AnalysisMagazine, September 2001 (Noria Corporation).
145. Badal, L., Whigham, J., and Minnick, T. The importance of ISO cleanliness codes. Machinery Lubrication Magazine, September 2005 (Noria Corporation).
146. Pavlat, M. R. Total cleanliness control for hydraulic and lubricating systems in the primary metal industry. Lubr. Eng., 1997, 53(2), 12-19.
147. Duchowski, J. K., Collins, K. G., and Dmochowski, W. M. Experimental evaluation of filtration requirements for journal bearings operating under different contaminant levels. Lubr. Eng., 2002, 58(6), 34-39. (Pubitemid 34617216)
148. Underwood, R. J. The tribological effects of contamination in rolling element bearings. PhD Thesis, Department of Mechanical Engineering, Imperial College London, UK, 2008.
149. Hamer, J. C. and Hutchinson, J. Denting of rolling element bearings by third body particles. PCS report for SKF, Tribology Group, Department of Mechanical Engineering, Imperial College London, UK, 1992.
150. Johnson, K. L. Contact mechanics, 1985 (Cambridge University Press, UK).
151. Hou, Z.-B. and Komanduri, R. Magnetic field assisted finishing of ceramics - part I: thermal model. ASME J. Tribol., 1998, 120(4), 645-651. (Pubitemid 29136929)
152. Hou, Z.-B. and Komanduri, R. Magnetic field assisted finishing of ceramics - part II: on the thermal aspects of magnetic float polishing (MFP) of ceramic balls. ASME J. Tribol., 1998, 120(4), 652-659.
153. Hou, Z.-B. and Komanduri, R. Magnetic field assisted finishing of ceramics - part III: on the thermal aspects of magnetic abrasive finishing (MAF) of ceramic rollers. ASME J. Tribol., 1998, 120(4), 660-667.
154. Tallian, T. E. Failure atlas for Hertz contact machine elements, 1992 (ASME Press, New York, USA). 155
155. Ville, F., Coulon, S., and Lubrecht, A. A. Influence of solid contaminants on the fatigue life of lubricated machine elements. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(5), 441-445. DOI: 10.1243/ 135065005X34062. (Pubitemid 44509275)
156. Zantopulos, H. Some observations on scuffing in tapered roller bearings. ASME J. Tribol., 1998, 120(3), 427-435. (Pubitemid 128725528)
157. Ju, F. D. and Huang, J. H. Heat checking in the contact zone of a bearing seal (a two-dimensional model of a single moving asperity). Wear, 1982, 79(1), 107-118.
158. Tseng, M.-L. and Burton, R. Thermal stress in a twodimensional (plane stress) half-space for a moving heat input.Wear, 1982, 79(1), 1-9.
159. Marscher,W. D. Thermal versus mechanical effects in high speed sliding.Wear, 1982, 79(1), 129-143.
160. Roylance,B. J.,Siu, S.W.,andVaughan,D. A.Thermallyrelated stress behaviour in concentrated contacts and the implications for scuffing failure. In Proceedings of the 12th Leeds-Lyon Symposium on Tribology (1985), Mechanisms and Surface Distress, Lyon, France, 1985, pp. 117-127 (Butterworth).
161. Ting, B.-Y. and Winer, W. O. Friction-induced thermal influences in elastic contact between spherical asperities. ASME J. Tribol., 1989, 111(2), 315-322.
162. Reddyhoff, T., Underwood, R. J., Nikas, G. K., Sayles, R. S., and Spikes, H. A. Thermal aspects of debris in EHL contacts. In Proceedings of the Fourth World Tribology Congress, Kyoto, Japan, 6-11 September 2009, p. 308.
163. Burwell, J. T. Survey of possible wear mechanisms. Wear, 1957, 1(2), 119-141.
164. Williams, J. A. andHyncica, A. M.Mechanisms of abrasive wear in lubricated contacts. Wear, 1992, 152(1), 57-74.
165. Fang, L., Kong, X., and Zhou, Q. A wear tester capable of monitoring and evaluating the movement pattern of abrasive particles in three-body abrasion. Wear, 1992, 159(1), 115-120. (Pubitemid 23600174)
166. De Pellegrin, D. V., Corbin, N. D., Baldoni, G., and Torrance, A. A. Diamond particle shape: its measurement and influence in abrasive wear. Tribol. Int., 2009, 42(1), 160-168.
167. Lewis, R. and Dwyer-Joyce, R. S. Interactions between toothbrush and toothpaste particles during simulated abrasive cleaning. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(8), 755-765. DOI: 10.1243/ 13506501JET96. (Pubitemid 46075666)
168. Dwyer-Joyce, R. S.,Hamer, J. C., Sayles, R. S.,and Ioannides, E. Surface damage effects caused by debris in rolling bearing lubricants, with an emphasis on friable materials. In Proceedings of the IMechE Symposium on Rolling element bearings - towards the 21st century, London, UK, 1990, pp. 1-8.
169. Stokes, G. G. On the effect of the internal friction of fluids on the motion of pendulums. Proc. Camb. Phil. Soc., 1850, 1, 104-106.
170. Jeffery, G. B. The motion of ellipsoidal particles immersed in a viscous fluid. Proc. R. Soc. Lond. A, 1922, 102, 161-179.
171. Rubinow, S. I. and Keller, J. B. The transverse force on a spinning sphere moving in a viscous fluid. J. Fluid Mech., 1961, 11(3), 447-459.
172. Bretherton, F. P. The motion of rigid particles in a shear flowat lowReynoldsnumber. J. FluidMech., 1962, 14(2), 284-304.
173. Saffman, P. G. The lift on a small sphere in a slow shear flow. J. FluidMech., 1965, 22(2), 385-400.
174. Brunn,P.The slowmotion of a sphere in a second-order fluid. Rheol. Acta, 1976, 15(3-4), 163-171.
175. Brunn, P. The behaviour of a sphere in nonhomogeneous flows of a viscoelastic fluid. Rheol. Acta, 1976, 15(11-12), 589-611.
176. Brunn, P. Interaction of spheres in a viscoelastic fluid. Rheol. Acta, 1977, 16(5), 461-475.
177. Drew,D. A. The force on a small sphere in slow viscous flow. J. FluidMech., 1978, 88(2), 393-400.
178. Leal, L. G. The motion of small particles in non- Newtonian fluids. J. Non-Newtonian FluidMech., 1979, 5, 33-78.
179. Leal, L. G. Particle motions in a viscous fluid. Annu. Rev. FluidMech., 1980, 12, 435-476.
180. Maxey, M. R. and Riley, J. J. Equation of motion for a small rigid sphere in a nonuniform flow. Phys. Fluids, 1983, 26(4), 883-889.
181. Sugihara-Seki, M. The motion of an elliptical cylinder in channelflowat lowReynolds numbers. J. FluidMech., 1993, 257, 575-596.
182. Saville,D. A. Electrokinetic effects with small particles. Annu. Rev. FluidMech., 1977, 9, 321-337.
183. Maxey, M. R. and Patel, B. K. Localized force representations for particles sedimenting in Stokes flow. Int. J. Multiphase Flow, 2001, 27(9), 1603-1626. (Pubitemid 32635850)
184. Zimmerman,W. B. On the resistance of a spherical particle settling in a tube of viscous fluid. Int. J. Eng. Sci., 2004, 42(17-18), 1753-1778.
185. Feng, J.,Hu, H. H., and Joseph,D. D. Direct simulation of initial value problems for the motion of solid bodies in a Newtonian fluid Part 1. Sedimentation. J. Fluid Mech., 1994, 261, 95-134.
186. Hampson, L. G. The interpretation of data from wear debris analysis, with particular reference to ferrography. Wear, 1981, 70(3), 335-345. (Pubitemid 12439272)
187. Lalli, F., Esposito, P. G., Piscopia, R., and Verzicco, R. Fluid-particle flow simulation by averaged continuous model. Comp. Fluids, 2005, 34(9), 1040-1061. (Pubitemid 40841271)
188. Cho, S. H., Choi, H. G., and Yoo, J. Y. Direct numerical simulation of fluid flow laden with many particles. Int. J.Multiphase Flow, 2005, 31(4), 435-451. (Pubitemid 40466035)
189. Dai, F. and Khonsari, M. M. A continuum theory of a lubrication problem with solid particles. ASME J. Appl. Mech., 1993, 60(1), 48-58.
190. Nguyen, A. V. and Evans, G. M. Exact and approximate expressions for resistance coefficients of a colloidal sphere approaching a solid surface at intermediate Reynolds numbers. Appl. Math. Model., 2007, 31(4), 763-769. (Pubitemid 44774378)
191. Weekley, S. J.,Waters, S. L., and Jensen, O. E. Transient elastohydrodynamic drag on a particle moving near a deformable wall. Q. J. Mech. Appl. Math., 2006, 59(2), 277-300.
192. Kraipech,W.,Nowakowski, A., Dyakowski,T., and Suksangpanomrung, A. An investigation of the effect of the particle-fluid and particle-particle interactions on the flow within a hydrocyclone. Chem. Eng. J., 2005, 111(2-3), 189-197. (Pubitemid 41230914)
193. Dwyer-Joyce, R. S. and Heymer, J. The entrainment of solid particles into rolling elastohydrodynamic contacts. In Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, Lyon, France, 1995, vol. 31, pp. 135-140. (Pubitemid 126838561)
194. Cann, P. M. E., Hamer, J. C., Sayles, R. S., Spikes, H. A., and Ioannides, E. Direct observation of particle entry and deformation in a rolling EHD contact. In Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, Elsevier Tribology and Interface Engineering Series, Lyon, France, 1995, vol. 31, pp. 127-134. (Pubitemid 126838560)
195. Higgs III, C. F. and Tichy, J. Granular flow lubrication: continuum modelling of shear behaviour. ASME J. Tribol., 2004, 126(3), 499-510. (Pubitemid 39016996)
196. Jang, J. Y. and Khonsari, M. M. On the granular lubrication theory. Proc. R. Soc. A, 2005, 461(2062), 3255-3278.
197. Fillot, N., Iordanoff, I., and Berthier,Y.Modelling third body flows with a discrete element method - a tool for understandingwear with adhesive particles. Tribol. Int., 2007, 40(6), 973-981. (Pubitemid 44856138)
198. Zamankhan, P. and Huang, J. Complex flow dynamics in dense granular flows - part II: simulations. ASME J. Appl.Mech., 2007, 74(4), 691-702. (Pubitemid 47317694)
199. Hua, D. Y. and Khonsari, M. M. Elastohydrodynamic lubrication by powder slurries. ASME J. Tribol., 1996, 118(1), 67-73. (Pubitemid 126551550)
200. Wornyoh, E. Y. A., Jasti, V. K., and Higgs III, C. F. A review of dry particulate lubrication: powder and granular materials. ASME J. Tribol., 2007, 129(2), 438-449. (Pubitemid 46796277)
201. Khonsari,M. M. (Ed.) Special Issue on granular lubrication. Proc. IMechE,Part J: J. Engineering Tribology, 2008, 222(6), 703-783.
202. Chiñas-Castillo, F. and Spikes, H. A. Mechanism of action of colloidal solid dispersions. ASME J. Tribol., 2003, 125(3), 552-557. (Pubitemid 36996823)
203. Dowson, D., Taylor, C. M., Childs, T. H. C., Dalmaz, G., Berthier,Y., Flamand, L., Georges, J.-M., and Lubrecht, A. A. In The third-body concept: interpretation of tribological phenomena (Ed. D. Dowson), vol. 31, 1996, 763 pp. (Elsevier Tribology Series, Lyon, France).
204. Ludema, K. C. Third bodies: perspectives on modelling in lubricated contacts, in close fitting contacts, etc. following on the concepts of Dr Maurice Godet. In The third-body concept: interpretation of tribological phenomena (Eds. D. Dowson et al.), vol. 31, 1996, pp. 3-19 (Elsevier Tribology Series, Lyon, France). (Pubitemid 126838549)
205. Jacobson, S. andHogmark, S.Tribofilms: on the crucial importance of tribologically induced surface modifications. In Recent developments in wear prevention, friction and lubrication (Ed. G. K. Nikas), 2010, pp. 197-225 (Research Signpost, Kerala, India).
206. Khonsari, M. M. On the modelling of multi-body interaction problems in tribology. Wear, 1997, 207(1-2), 55-62. (Pubitemid 27447599)
207. Nikas, G. K. A mechanistic model of spherical particle entrapment in elliptical contacts. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(6), 507-522. DOI: 10.1243/13506501JET126. (Pubitemid 44514896)
208. Kusano, Y. and Hutchings, I. M. Modelling the entrainment and motion of particles in a gap: application to abrasive wear. Proc. IMechE, Part J: J. Engineering Tribology, 2003, 217(6), 427-433. DOI: 10.1243/ 135065003322620255.
209. Nikas, G. K. Mathematical analysis of the entrapment of solid spherical particles in non-conformal contacts. ASME J. Tribol., 2001, 123(1), 83-93. (Pubitemid 32696606)
210. Cusano, C. and Sliney, H. E. Dynamics of solid dispersions in oil during the lubrication of point contacts, part I - graphite. ASLE Trans., 1982, 25(2), 183-189. (Pubitemid 12525017)
211. Nikas, G. K. Effects of operating conditions and friction on the entrapment of spherical debris particles in elliptical contacts. Proc. IMechE, Part J: J. Engineering Tribology, 2007, 221(6), 727-741. DOI: 10.1243/ 13506501JET283. (Pubitemid 47618132)
212. Oktay, S. T. and Suh, N. P. Wear debris agglomeration in dry and boundary lubricated sliding. In Proceedings of the 18th Leeds-Lyon Symposium on Tribology (wear particles), Elsevier Tribology Series, Lyon, France, 1991, vol. 21, pp. 347-356.
213. Wan, G. T. Y. and Spikes, H. A. Two phase lubricants in elastohydrodynamic contacts - graphite in oil dispersions. In Proceedings of the 12th Leeds-Lyon Symposium on Tribology (mechanisms and surface distress), Lyon, France, 1985, paper X(i) (Butterworth).
214. Palios, S., Cann, P. M., and Spikes, H. A. Behaviour of PTFE suspensions in rolling/sliding contacts. In Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series, Lyon, France, 1995, vol. 31, pp. 141-152.
215. Chiñas-Castillo, F. and Spikes, H. A. Behaviour of colloidally-dispersed solid particles in very thin lubricated contacts. In Proceedings of the 26th Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series, Leeds, UK, 1999, vol. 38, pp. 719-731. (Pubitemid 32949702)
216. Languirand, M. T. and Tichy, J. A. The effect of a translating high aspect ratio particle in a plane slider bearing. ASME J. Lubr. Technol., 1983, 105(3), 396-404.
217. Kang,Y. S., Sadeghi, F., and Ai, X. Debris effects on EHL contact. ASME J. Tribol., 2000, 122(4), 711-720. (Pubitemid 32152755)
218. Way, S. Pitting due to rolling contact. J. Appl. Mech., 1935, 2, 49-58.
219. Bower, A. F. The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks. ASME J. Tribol., 1988, 110(4), 704-711.
220. Kaneta, M., Yatsuzuka, H., and Murakami, Y. Mechanism of crack growth in lubricated rolling/sliding contact. ASLE Trans., 1985, 28(3), 407-414. (Pubitemid 15530069)
221. Murakami,Y.,Kaneta,M.,andYatsuzuka,H. Analysis of surface crack propagation in lubricated rolling contact. ASLE Trans., 1985, 28(1), 60-68. (Pubitemid 15439758)
222. Kaneta, M., Suetsugu, M., and Murakami, Y. Mechanism of surface crack growth in lubricated rolling/ sliding spherical contact. ASME J. Appl. Mech., 1986, 53(2), 354-360. (Pubitemid 16571316)
223. Xu, G. and Sadeghi, F. Spall initiation and propagation due to debris denting.Wear, 1996, 201(1-2), 106-116.
224. Lundberg, G. and Palmgren, A. Dynamic capacity of rolling bearings. Acta Polytech.Mech. Eng. Ser., R. Swed. Acad. Eng. Sci., 1947, 1(3), 1-50.
225. Lundberg, G. and Palmgren, A. Dynamic capacity of roller bearings. Acta Polytech. Mech. Eng. Ser. R. Swed. Acad. Eng. Sci., 1952, 2(4), 1-32.
226. Palmgren, A. Die lebansdauer von kugellagern (The service life of ball bearings). Zeitschrift des Vereines Deutscher Ingenieure, 1924, 68(14), 339-341 (NASA TT-F-13460, 1971).
227. Weibull,W. A statistical theory of the strength of materials. Inginiors Vetenskaps Adademien (Proc. R. Swed. Acad. Eng.), 1939, 151(3), 45-55.
228. Ioannides, E. and Harris, T. A. A new fatigue life model for rolling bearings. ASME J. Tribol., 1985, 107(3), 367-377.
229. Zaretsky,E.V.Rolling bearing life prediction, theoryand application. In Recent developments in wear prevention, friction and lubrication (Ed. G. K. Nikas), 2010, pp. 45-136 (Research Signpost, Kerala, India).
230. Tallian, T. E. Simplified contact fatigue life prediction model, part I: review of published models. ASME J. Tribol., 1992, 114(2), 207-213.
231. Tallian, T. E. Simplified contact fatigue life prediction model, part II: new model. ASME J. Tribol., 1992, 114(2), 214-222.
232. Ai, X. and Nixon, H. P. Fatigue life reduction of roller bearings due to debris denting, part I: theoretical modelling. Tribol. Trans., 2000, 43(2), 197-204. (Pubitemid 30322953)
233. Lubrecht, A. A., Venner, C. H., Lane, S., Jacobson, B., and Ioannides, E. Surface damage - comparison of theoretical and experimental endurance lives of rolling bearings. In Proceedings of the Japan International Tribology Conference, Nagoya, Japan, 29 October-1 November 1990.
234. Nikas, G. K. and Sayles, R. S. A study of lubrication mechanisms using two-phase fluids with porous bearing materials. Proc. IMechE, Part J: J. Engineering Tribology, 2008, 222(6), 771-783. DOI: 10.1243/13506501 JET385.