A mechanistic model of spherical particle entrapment in elliptical contacts

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 220, Issue 6, 2006, Pages 507-522

  Nikas, G K ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

Contact; Contamination; Debris; Elliptical; Entrapment; Oil; Particle

Indexed keywords

ENTRAPMENT; ROLLING-SLIDING ELLIPTICAL CONTACTS;

COMPUTATIONAL METHODS; COMPUTER SIMULATION; LUBRICATION; MATHEMATICAL MODELS; SOLIDS;

CONTACTS (FLUID MECHANICS);

COMPUTATIONAL METHODS; COMPUTER SIMULATION; CONTACTS (FLUID MECHANICS); LUBRICATION; MATHEMATICAL MODELS; SOLIDS;

EID: 33749493185     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501JET126     Document Type: Article

References (59)

1. Rabinowicz, E. and Mutis, A. Effect of abrasive particle size on wear. Wear, 1965, 8, 381-390.
2. Richardson, R. C. D. The wear of metals by relatively soft abrasives. Wear, 1968, 11(4), 245-275.
3. Dwyer-Joyce, R. S. The effects of lubricant contamination on rolling bearing performance. PhD Thesis, Imperial College London, Mechanical Engineering Department, London, UK, 1993.
4. Dwyer-Joyce, R. S. Predicting the abrasive wear of ball bearings by lubricant debris. Wear, 1999, 233-235, 692-701.
5. Chandrasekaran, S., Khemchandani, M. V., and Sharma, J. P. Effect of abrasive contaminants on scuffing. Tribol. Int., 1985, 18(4), 219-222.
6. Xuan, J. L., Hong, I. T., and Fitch, E. C. Hardness effect on three-body abrasive wear under fluid film lubrication. ASME J. Tribol., 1989, 111, 35-40.
7. Williams, J. A. and Hyncica, A. M. Abrasive wear in lubricated contacts. J. Phys. D. Appl. Phys., 1992, 25, A81-A90.
8. Dwyer-Joyce, R. S., Sayles, R. S., and Ioannides, E. An investigation into the mechanisms of closed three-body abrasive wear. Wear, 1994, 175, 133-142.
9. Hamilton, R. W., Sayles, R. S., and Ioannides, E., Wear due to debris particles in rolling bearing contacts. Proceedings of the 24th Leeds-Lyon Symposium on Tribology, England, Tribology Series 34, 1998 (Elsevier, Amsterdam, The Netherlands), pp. 87-93.
10. Ville, F. and Nelias, D. Influence of the nature and size of solid particles on the indentation features in EHL contacts. Proceedings of the 24th Leeds-Lyon Symposium on Tribology, England, Tribology Series 34, 1998 (Elsevier, Amsterdam, The Netherlands), pp. 399-409.
11. Ville, F. and Nelias, D. An experimental study of the concentration and shape of dents caused by spherical metallic particles in EHL contacts. STLE Tribol. Trans., 1999, 42(1), 231-240.
12. Hamer, J. C., Sayles, R. S., and Ioannides, E. Deformation mechanisms and stresses created by 3rd body debris contacts and their effects on rolling bearing fatigue. Proceedings of the 14th Leeds-Lyon Symposium on Tribology, Lyon, France, Tribology Series 12, 1987 (Elsevier, Amsterdam, The Netherlands), pp. 201-208.
13. Hamer, J. C., Sayles, R. S., and Ioannides, E. Particle deformation and counterface damage when relatively soft particles are squashed between hard anvils. STLE Tribol. Trans., 1989, 32(3), 281-288.
14. Ko, C. N. and Ioannides, E. Debris denting - the associated residual stresses and their effect on the fatigue life of rolling bearings: an FEM analysis. Tribological design of machine elements, 1989, pp. 199-207 (Elsevier, Amsterdam, The Netherlands).
15. Kang, Y. S., Sadeghi, F., and Hoeprich, M. R. A finite element model for spherical debris denting in heavily loaded contacts. ASME J. Tribol., 2004, 126(1), 71-80.
16. Xu, G., Sadeghi, F., and Cogdell, J. D. Debris denting effects on elastohydrodynamic lubricated contacts. ASME J. Tribol., 1997, 119(3), 579-587.
17. Xu, G., Sadeghi, F., and Hoeprich, M. Residual stresses due to debris effects in EHL contacts. STLE Tribol. Trans., 1997, 40(4), 613-620.
18. Tallian, T. E. Prediction of rolling contact fatigue life in contaminated lubricant: part I - mathematical model. ASME J. Lubr. Technol., 1976, 98, 251-257.
19. Tallian, T. E. Prediction of rolling contact fatigue life in contaminated lubricant: part II - experimental. ASME J. Lubr. Technol., 1976, 98, 384-392.
20. Loewenthal, S. H. and Moyer, D. W. Filtration effects on ball bearing life and condition in a contaminated lubricant. ASME J. Lubr. Technol., 1979, 101, 171-176.
21. Ronen, A., Malkin, S., and Loewy, K. Wear of dynamically loaded hydrodynamic bearings by contaminant particles. ASME J. Lubr. Technol., 1980, 102, 452-458.
22. Loewenthal, S. H., Moyer, D. W., and Needelman, W. M. Effects of ultra-clean and centrifugal filtration on rolling-element bearing life. ASME J. Lubr. Technol., 1982, 104, 283-291.
23. Sayles, R. S. and Ioannides, E. Debris damage in rolling bearings and its effects on fatigue life. ASME J. Tribol., 1988, 110(1), 26-31.
24. Hamer, J. C., Lubrecht, A. A., Ioannides, E., and Sayles, R. S. Surface damage on rolling elements and its subsequent effects on performance and life. Proceedings of the 15th Leeds-Lyon Symposium on Tribology, Leeds, England, Tribology Series 14, 1989 (Elsevier, Amsterdam, The Netherlands), pp. 189-197.
25. Sayles, R. S., Hamer, J. C., and Ioannides, E. The effects of particulate contamination in rolling bearings - a state of the art review. Proc. Instn Mech. Engrs, Part G: J. Aerospace Engineering, 1990, 204, 29-36.
26. Nixon, H. P. and Zantopulos, H. Fatigue life performance comparisons of tapered roller bearings with debris-damaged raceways. STLE Lubr. Eng., 1995, 51(9), 732-736.
27. Lubrecht, A. A., Dwyer-Joyce, R. S., and Ioannides, E. Analysis of the influence of indentations on contact life. Proceedings of the 18th Leeds-Lyon Symposium on Tribology, Lyon, France, Tribology Series 21, 1992 (Elsevier, Amsterdam, The Netherlands), pp. 173-181.
28. Ville, F. and Nelias, D. Early fatigue failure due to dents in EHL contacts. STLE Tribol. Trans., 1999, 42(4), 795-800.
29. Kahlman, L. and Hutchings, I. M. Effect of particulate contamination in grease-lubricated hybrid rolling bearings. STLE Tribol. Trans., 1999, 42(4), 842-850.
30. Nellas, D., and Ville, F. Detrimental effects of debris dents on rolling contact fatigue. ASME J. Tribol., 2000, 122(1), 55-64.
31. Ai, X. Effect of debris contamination on the fatigue life of roller bearings. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribol., 2001, 215, 563-575.
32. Wan, G. T. Y. and Spikes, H. A. The behaviour of suspended solid particles in rolling and sliding elastohydrodynamic contacts. STLE Tribol. Trans., 1987, 31(1), 12-21.
33. Enthoven, J. C. and Spikes, H. A. Visual observation of the process of scuffing. Proceedings of the 21st Leeds-Lyon Symposium on Tribology, Tribology Series 30, 1995 (Elsevier, Amsterdam, The Netherlands), pp. 487-494.
34. Nikas, G. K., Sayles, R. S., and Ioannides, E. Effects of debris particles in sliding/rolling EHD contacts. Proceedings of the First World Tribology Congress, London, UK, 8-12 September 1997, p. 271.
35. Nikas, G. K., Sayles, R. S., and Ioannides, E. Effects of debris particles in sliding/rolling elastohydrodynamic contacts. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1998, 212(J5), 333-343.
36. Nikas, G. K. Theoretical modeling of the entrainment and thermomechanical effects of contamination particles in elastohydrodynamic contacts. PhD Thesis, imperial College London, Mechanical Engineering Deptartment, London, UK, 1999.
37. Nikas, G. K. Particle entrainment in elastohydrodynamic point contacts and related risks of oil starvation and surface indentation. ASME J. Tribol., 2002, 124(3), 461-467.
38. Khonsari, M. M. and Wang, S. H. On the role of particulate contamination in scuffing failure. Wear, 1990, 137, 51-62.
39. Khonsari, M. M., Pascovici, M. D., and Kucinschi, B. V. On the scuffing failure of hydrodynamic bearings in the presence of an abrasive contaminant. ASME J. Tribol., 1999, 121(1), 90-96.
40. Nikas, G. K., Ioannides, E., and Sayles, R. S. Thermal modeling and effects from debris particles in sliding/rolling EHD line contacts - a possible local scuffing mode. ASME J. Tribol., 1999, 121(2), 272-281.
41. Nikas, G. K., Sayles, R. S., and Ioannides, E. Thermoelastic distortion of EHD line contacts during the passage of soft debris particles. ASME J. Tribol., 1999, 121(2), 265-271.
42. Nikas, G. K. An advanced model to study the possible thermomechanical damage of lubricated sliding-rolling line contacts from soft particles. ASME J. Tribol., 2001, 123(4), 828-841.
43. Kjer, T. Particles in new motor oils. Wear, 1981, 69, 395-396.
44. Leng, J. A. and Davies, J. E. Ferrographic examination of unused lubricants for diesel engines. Wear, 1988, 122, 115-119.
45. Stachowiak, G. W., Kirk, T. B., and Stachowiak, G. B. Ferrography and fractal analysis of contamination particles in unused lubricating oils. Tribol. Int., 1991, 24(6), 329-334.
46. Cusano, C. and Sliney, H. E. Dynamics of solid dispersions in oil during the lubrication of point contacts, Part I - Graphite. ASLE Trans., 1982, 25(2), 183-189.
47. Dwyer-Joyce, R. S. and Heymer, J. The entrainment of solid particles into rolling elastohydrodynamic contacts. Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, Lyon, France, Tribology Series 31, 1996 (Elsevier, Amsterdam, The Netherlands), pp. 135-140.
48. Cann, P. M. E., Hamer, J. C., Sayles, R. S., Spikes, H. A., and Ioannides, E. Direct observation of particle entry and deformation in a rolling EHD contact. Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, Lyon, France, Tribology Series 31, 1996 (Elsevier, Amsterdam, The Netherlands), pp. 127-134.
49. Dwyer-Joyce, R. S., Hamer, J. C., Sayles, R. S., and Ioannides, E. Lubricant screening for debris effects to improve fatigue and wear life. Proceedings of the 18th Leeds-Lyon Symposium on Tribology, Lyon, France, Tribology Series 21, 1992 (Elsevier, Amsterdam, The Netherlands), pp. 57-63.
50. Kusano, Y. and Hatchings, I. M. Modeling the entrainment and motion of particles in a gap: application to abrasive wear. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2003, 217, 427-433.
51. Nikas, G. K. Mathematical analysis of the entrapment of solid spherical particles in non-conformal contacts. ASME J. Tribology, 2001, 123(1), 83-93.
52. Chao, K. K., Saba, C. S., and Centers, P. W. Effects of lubricant borne solid debris in rolling surface contacts. STLE Tribology Trans., 1996, 39(1), 13-22.
53. Nilsson, R., Olofsson, U., and Sundvall, K. Filtration and coating effects on self-generated particle wear in boundary lubricated roller bearings. Tribol. Int., 2005, 38, 145-150.
54. Johnson, K. L. Contact mechanics (reprint 1994), 1985 (Cambridge University Press, UK).
55. Hamrock, B. J. Fundamentals of fluid flim lubrication, 1994 (McGraw-Hill).
56. Stachowiak, G. W. and Batchelor, A. W. Engineering tribology, 2nd edition, 2001 (Butterworth-Heinemann).
57. Nikas, G. K. Boussinesq-Cerruti functions and a simple technique for substantial acceleration of subsurface stress computations in elastic half-spaces. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(J1), 19-28.
58. Elsharkawy, A. A. and Hamrock, B. J. Subsurface stresses in micro-EHL line contacts. ASME J. Tribology, 1991, 113, 645-656.
59. Nikas, G. K. Fatigue life and traction modeling of continuously variable transmissions. ASME J. Tribology, 2002, 124(4), 689-698.