The effects of soot-contaminated engine oil on wear and friction: A review

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering

Volumn 222, Issue 9, 2008, Pages 1669-1689

  Green, D A ^a   Lewis, R ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

Abrasion; Corrosion; Diesel; Emissions; Engine; Filtration; Lubricant contamination; Particulates; Soot; Starvation; Wear; Wear mechanisms; Wear testing

Indexed keywords

ABRASION; CONTAMINATION; CORROSION; DIESEL ENGINES; DUST; ENGINES; EROSION; FILTRATION; FRICTION; MACHINE DESIGN; PARTICULATE EMISSIONS; WEAR OF MATERIALS;

DIESEL; LUBRICANT CONTAMINATIONS; PARTICULATES; STARVATION; WEAR MECHANISMS; WEAR-TESTING;

SOOT;

EID: 67650081264     PISSN: 09544070     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544070JAUTO468     Document Type: Article

References (76)

1. Dennis, A. J., and Garner., C. P., and Taylor, D. H. C. The effect of EGR on diesel engine wear. SAE paper 1999-01-0839, 1999.
2. Li, S., and Csontos., A. A., Gable, B. M., Passut, C. A., and Jao, T. Wear in Cummins M-11/EGR test engines. SAE paper 2002-01-1672, 2002.
3. Clague, A. D. H., and Donnet., J. B., Wang, T. K., and Peng, J. C. M. A comparison of diesel engine soot with carbon black. Carbon, 1999, 37, 1553-1565.
4. Robert Bosch GmbH. Automotive handbook, 6th edition, 2004 (John Wiley, New York).
5. Winterbone, D. E. Advanced thermodynamics for engineers, 1997 (Arnold, London).
6. Heywood, J. B. Internal combustion engine fundamentals, 1988 (McGraw-Hill, New York).
7. Kennedy, I. M. Models of soot formation and oxidation, Prog. Energy Combusti. Sci., 1997, 23, 95-132.
8. Taylor, C. F. The internal-combustion engine in theory and practice, Vol. 2. Combustion, fuels, materials, design, revised edition, 1985 (MIT Press, Boston, Massachusetts).
9. Stone, R. Introduction to internal combustion engines, 3rd edition, 1999 (Palgrave, New York).
10. Daido, S., Kodama, Y., Inohara, T., Ohyama, N., and Sugiyama, T. Analysis of soot accumulation inside diesel engines. JSAE Rev., 2000, 21, 303-308.
11. Querlioz, E., Ville, F., Lubrecht, A. A., and Lenon, H. Experimental investigations on the contact fatigue life under starved conditions. In Tribology at the interface, Proceedings of the 33rd Leeds-Lyon Symposium on Tribology, Leeds, UK, 12-15 September 2006; in Tribology Int., 2007, 140(10-12), 1619-1626.
12. Chinas-Castillo, F. and Spikes, H. A. The behaviour of diluted sooted oils in lubricated contacts. In Transient processes in tribology, Proceedings of the 30th Leeds-Lyon Symposium on Tribology, Lyon, France, 2-5 September 2003, 2004, pp. 37-43 (Elsevier, Amsterdam).
13. Nagai, I., Endo, H., Nakamura, H., and Yano, H. Soot and valve train wear in passenger car diesel engines. SAE paper 831757, 1983.
14. Rounds, F. G. Carbon: cause of diesel engine wear? SAE paper 770829, 1977.
15. Yoshida, K. and Sakurai, T. Some aspects of tri-bological behaviour on dispersed-phase system. Lubric. Engng, 1998, 44, 913-921.
16. Gautam, M., Durbha, M., Chitoor, K., Jaraiedi, M., Mariwalla, N., and Ripple, D. Contribution of soot contaminated oils to wear. SAE paper 981406, 1998.
17. Taylor, R. I. Future challenges for engine lubricants. In Tribology 2006, Proceedings of the IMechE Conference on Surface engineering and tribology for future engines and drivelines, London, 2006 (Professional Engineering Publishing Ltd, London).
18. Taylor, R. I., Mainwaring, R., and Mortier, R. M. Engine lubricant trends since 1990. Proc. IMechE, Part J: J. Engineering Tribology, 2005, 219, 331-346.
19. Federal and California exhaust and evaporative emission standards for light-duty vehicles and light-duty trucks, 2000 (US Environmental Protection Agency, Washington, DC).
20. Kliesh, J. and Langer, T. Deliberating diesel: environmental, technical, and social factors affecting diesel passenger vehicle prospects in the United States, 2003 (American Council for an Energy-Efficient Economy, Washington, DC).
21. Gotze, H. J., Schneider, J., and Herzog, H. G. Determination of polycyclic aromatic hydrocarbons in diesel soot by high-performance liquid chroma-tography. Fresenius J. Analyt. Chemistry, 1991, 340(1), 27-30.
22. Munson, J. W. and Hertz, P. B. Seasonal diesel fuel and fuel additive lubricity survey using the Munson ROCLE bench test. SAE paper 1999-01-3588, 1999.
23. Beatrice, C., Bertoli, C., Del Giacomo, N., and Migliaccio, M. N. A. Potential of oxygenated synthetic fuel and reformulated fuel on emissions from a modern DI diesel engine. SAE paper 1999-01-3595, 1999.
24. Cheng, A. S. and Dibble, R. W. Emissions performance of oxygenate-in-diesel blends and Fischer-Tropsch diesel in a compression ignition engine. SAE paper 1999-01-3606, 1999.
25. Staat, F. and Gateau, P. The effects of rapeseed oil methyl ester on diesel engine performance, exhaust emissions and long-term behaviour - a summary of three years of experimentation, SAE paper 950053, 1995.
26. Hansen, K. L. and Jensen, M. G. Chemical and biological characteristics of exhaust emissions from a DI diesel engine fuelled with rapeseed oil methyl ester (RME). SAE paper 971689, 1997.
27. Sapuan, S. M., and Masjuki., H. H., and Azlan, A. The use of palm oil as diesel fuel substitute, Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 1995, 210, 47-53.
28. Raadnui, S. and Meenak, A. Effects of refined palm oil (RPO) fuel on wear of diesel engine components. Wear, 2003, 254, 1281-1288.
29. Chang, D. Y. and Van Gerpen, J. H. Fuel properties and engine performance for biodiesel prepared from modified feedstocks. SAE paper 971684, 1997.
30. Tritthart, P. and Zelenka, P. Vegetable oils and alcohols additive fuels for diesel engines. SAE paper 905112, 1990.
31. Green, D. A., Lewis, R., and Dwyer-Joyce, R. S. The wear effects and mechanisms of soot contaminated automotive lubricants. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220, 159-169.
32. Ramkumar, P., Wang, L., Harvey, T. J., Wood, R. J. K., Nelson, K., Yamaguchi, E. S., Harrison, J. J., and Powrie, H. E. G. The effect of diesel engine oil contamination on friction and wear. In Proceedings of the World Tribology Congress III (WTC2005), Washington, DC, USA, 12-16 September 2005, abstract WTC2005-63854 (American Society of Mechanical Engineers, New York).
33. Yamaguchi, E. S., Untermann, M., Roby, S. H., and Ryason., P. R., and Yeh, S. W. Soot wear in diesel engines. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220, 463-469.
34. Bell, J. C. Reproducing the kinematic conditions forautomotive valve train wear in a laboratory test machine. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1996, 210, 135-44.
35. Green, D. A., Lewis, R., and Dwyer-Joyce, R. S. Wear of valve train components due to soot contaminated lubricant. SAE paper 2006-01-1098, 2006.
36. Kuo, C. C., and Passut., C. A., Jao, T., Csontos, A. A., and Howe, J. M. Wear mechanism in Cummins M-11 high soot diesel test engines. SAE paper 981372, 1998.
37. Global performance specification for diesel engine oil (global DHD-1) - recommended guideline, 2001 (Japan Automobile Manufacturers' Association, Inc., Washington, DC).
38. Groff, W. P. Evaluation and qualification of gasoline and diesel engine lubricants, 1997 (Southwest Research Institute, San Antonio, Texas).
39. ASTM G133-05. Standard test method for linearly reciprocating ball-on-flat sliding wear, in ASTM Book of Standards, Vol. 03.02, 1995 (ASTM International, Philadelphia, Pennsylvania).
40. Truhan, J. J., Qu, J., and Blau, P. J. The effect of lubricating oil condition on the friction and wear of piston ring and cylinder liner materials in a reciprocating bench test. Wear, 2005, 259, 1048-1055.
41. Mascolo, G., Rausa, R., Bagnuolo, G., Mininni, G., and Tinucci, L. Thermal degradation of synthetic lubricants under oxidative pyrolytic conditions. J. Analyt. Appl. Pyrolysis, 2006, 75(2), 167-173.
42. Rounds, F. G. The generation of synthetic diesel engine oil soots for wear studies. Lubric. Engng, 1984, 40(7), 394-401.
43. Wedlock, D. J., Shuff, P., Dare-Edwards, M., Jia, X., and Williams, R. A. Experimental and simulation approaches to understanding soot aggregation. SAE paper 1999-01-1516, 1999.
44. Hosonuma, K., Yoshida, K., and Matsunaga, A. The decomposition products of zinc dialkyldithio-phosphate in an engine and their interaction with diesel soot. Wear, 1985, 103, 297-309.
45. Torrance, M. Wear of lubricated steel in the presence of dispersed carbon. In Proceedings of the IMechE Mission of Tribology Conference, London, 2004 (Professional Engineering Publishing Limited, London).
46. Kawamutra, M., Ishiguro, T., Fujita, K., and Morimoto, H. Deterioration of antiwear properties of diesel engine oils during use. Wear, 1988, 123, 269-280.
47. Berbezier, I., and Martin., J. M., and Kapsa, P. The role of carbon in lubricated mild wear. Tribology Int., 1986, 19(3), 115-122.
48. Ryason, P. R., and Chan., I. Y., and Gilmore, J. T. Polishing wear by soot. Wear, 1990, 137, 15-24.
49. Gautam, M., Chitoor, K., Durbha, M., and Summers, J. C. Effect of diesel soot contaminated oil on engine wear - investigation of novel oil formulations. Tribology Int., 1999, 32, 687-699.
50. Gautam, M., Chitoor, K., Balla, S., and Keane, M. Contribution of soot contaminated oils to wear - part II. SAE paper 1999-01-1519, 1999.
51. Sato, H., Tokuoka, N., Yamamoto, H., and Sasaki, M. Study of wear mechanism by soot contaminated in engine oil. SAE paper 1999-01-3573, 1999.
52. Mainwaring, R. Soot and wear in heavy-duty diesel engines. SAE paper 971631, 1997.
53. Devlin, M. T., and Baren., R. E., Sheets, R. M., McIntosh, K., Turner, T. L., and Jao, T. Characterization of deposits formed on sequence IIIG pistons. SAE paper 2005-01-3820, 2005.
54. Ishiki, K., Oshida, S., Takiguchi, M., and Urabe, M. A study of abnormal wear in power cylinder of diesel engine with EGR - wear mechanism of soot contaminated in lubricating oil. SAE paper 2000-01-0925, 2000.
55. Yahagi, Y. Corrosive wear of diesel engine cylinder bore. Tribology Int., 1987, 20(6), 365-373.
56. Masuko, M., Suzuki, A., and Ureno, T. Influence of chemical and physical contaminants on the anti-wear performance of model automotive engine oil. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220, 455-462.
57. Soejima, M., Ejima, Y., Uemori, K., and Kawasaki, M. Studies on friction and wear characteristics of cam and follower: influences of soot contamination in engine oil. JSAE Rev., 2002, 23, 113-119.
58. Kim, C., and Passut., C. A., and Zang, D. M. Relationships among oil composition combustion-generated soot, and diesel engine valve train wear. SAE paper 922199, 1992.
59. Liu, C., Nemoto, S., and Ogano, S. Effect of soot properties in diesel engine oils on frictional characteristics. Tribology Trans., 2003, 46(1), 12-18.
60. Green, D. A. and Lewis, R. Effect of soot on oil properties wear of engine components. J. Physics D, Appl. Physics, 2007, 40, 5488-5501.
61. Devlin, M. T., and Greene., S. V., and Wooton, D. L. Molecular changes to polymeric additives occurring during fuel economy aging tests. SAE paper 982507, 1998.
62. Devlin, M. T., and Lam., W. Y., and McDonnell, T. F. Comparison of the physical and chemical changes occurring in oils during aging in vehicle and engine economy tests. SAE paper 982504, 1998.
63. Ryason, P. R. and Hansen, T. P. Voluminosity of soot aggregates: a means of characterizing soot-laden oils. SAE paper 912343, 1991.
64. Batko, M. A., and Florkowski., D. W., Devlin, M. T., Li, S., Eggerding, D. W., and Lam., W. Y., McDonnell, T. F., and Jao, T. Low temperature rheological properties of aged crankcase oils. SAE paper 2000-01-2943, 2000.
65. Zeidan, M., Jia, X., Williams, R. A., and Wedlock, D. J. Simulation of aggregation with applications of soot-laden lubricating fluids. Particle Particle Systems Characterization, 2004, 21, 473-482.
66. Watson, J. H. P. Magnetic filtration. J. Appl. Physics, 1973, 44(9), 4209-4213.
67. Papp, G. and Peeters, F. M. Spin filtering in a magnetic-electric barrier structure. Appl. Physics Lett., 2001, 78(15), 2184-2186.
68. Hawkes, J. J., and Cefai., J. J., Barrow, D. A., Coakley, W. T., and Briarty, L. G. Ultrasonic manipulation of particles in microgravity. J. Physics D: Appl. Physics, 1998, 31, 1673-1680.
69. Tarleton, E. S. and Wakeman, R. J. Microfiltration enhancement by electrical and ultrasonic force fields. In Proceedings of the Filtration Society Conference (Filtech 89), Karlsruhe, West Germany, September 1989, pp. 227-237 (Filtration Society, Karlsruhe).
70. Gupta, S., and Feke., D. L., and Manas-Zloczower, I. Fractionation of mixed particulate solids according to compressibility using ultrasonic standing wave fields. Chem. Engng Sci., 1995, 50(20), 3275-3284.
71. Petersson, F., Nilsson, A., Holm, C., Jonsson, H., and Laurell, T. Separation of lipids from blood utilizing ultrasonic standing waves in microfluidic channels. Analyst, R. Soc. Chemistry, 2004, 129, 938-943.
72. Booth, J. E., and Nelson., K. D., Harvey, T. J., Wood, R. J. K., Wang, L., Powrie, H. E. G., and Martinez, J. G. The feasibility of using electrostatic monitoring to identify diesel lubricant additives and soot contamination interactions by factorial analysis. Tribology Int., 2006, 39, 1564-1575.
73. Park, B. Y., Paradiso, A., Kawabe, M., and Madou, M. J. A novel dielectrophoretic oil filter. Proc. IMechE, Part D: J. Automobile Engineering, 2006, 220, 481-496.
74. Wadenpohl, C. and Loffler, F. Electrostatic agglo-moration and centrifugal separation of diesel soot particles. Chem. Engng Processing, 1994, 33, 371-377.
75. Needle, D. J. Lubricants recycling. Ind. Lubric. Tribology, 1994, 46(4), 5-7.
76. Bergmann, H., Rittel, A., Iourtchouk, T., Schoeps, K., and Bouzek, K. Electrochemical treatment of cooling lubricants. Chem. Engng Processing, 2003, 42, 105-119.