Contact fatigue analysis of a dented surface in a dry elastic-plastic circular point contact

Tribology Letters

Volumn 29, Issue 2, 2008, Pages 139-153

  Antaluca, Eduard ^a   Nélias, Daniel ^a  

^a UNIVERSITÉ DE LYON   (France)

Author keywords

Contact modeling; Contaminated lubricant; Dang Van criterion; Debris denting; Elastic plastic contact; Fatigue; Rolling contact fatigue

Indexed keywords

CONTACT MODELING; CONTAMINATED LUBRICANT; DANG VAN CRITERION; DEBRIS DENTING; ELASTIC-PLASTIC CONTACT; ROLLING CONTACT FATIGUE;

FATIGUE OF MATERIALS; FRICTION; LUBRICANTS; MATHEMATICAL MODELS;

SURFACE ANALYSIS;

FATIGUE OF MATERIALS; FRICTION; LUBRICANTS; MATHEMATICAL MODELS; SURFACE ANALYSIS;

EID: 38349057191     PISSN: 10238883     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11249-007-9291-0     Document Type: Article

References (73)

1. Tallian, T.E.: Failure atlas for hertz contact machine elements. ASME Press, New-York (1992)
2. Nélias, D., Ville, F.: Detrimental effects of debris dents on rolling contact fatigue. ASME J. Tribol. 122(1), 55-64 (2000)
3. Nélias, D., Dumont, M.-L., Champiot, F., Vincent, A., Girodin, D., Fougères, R., Flamand, L.: Role of inclusions, surface roughness and operating conditions on rolling contact fatigue. ASME J. Tribol. 121(2), 240-251 (1999)
4. Fitzsimmons, B., Clevenger, H.D.: Contaminated lubricants and tapered roller bearing Wear. ASLE Trans. 20(2) 97-107 (1977)
5. Loewenthal, S.H., Moyer, D.W.: Filtration effects on ball bearing life and condition in a contaminated lubricant. ASME J. Lubr. Technol. 101, 171-179 (1979)
6. Loewenthal, S.H., Moyer, D.W., Needelman, W.M.: Effects of ultraclean and centrifugal filtration on rolling-element bearing life. ASME J. Lubr. Technol. 104, 283-292 (1982)
7. Needelman, W.: Filtration for wear control. Chapter in ASME wear, control handbook, pp. 507-582. ASME Press, New-York (1980)
8. Perroto, J.A., Riano, R.R., Murray, S.F.: Effect of abrasive contamination on ball bearing performance. Lubr. Eng. 35(12), 698-705 (1979)
9. Ioannides, E., Beghini, E., Jacobson, B., Bergling, G., Wuttkowski, J.G.: Cleanliness and its importance to bearing performance. Lubr. Eng. 49(9), 657-663 (1993)
10. Wedeven, L.D.: Influence of debris dent on EHD lubrication. ASLE Trans. 21(1), 41-52 (1977)
11. Wedeven, L.D., Cusano, C.: Elastohydrodynamic film thickness measurements of artificially produced surface dents and grooves. ASLE Trans. 22(4), 369-381 (1979)
12. Cusano, C., Sliney, H.E.: Dynamics of solid dispersions in oil during the lubrication of point contacts, Part I-Graphite. ASLE Trans. 25(2), 183-189 (1982)
13. Cusano, C., Wedeven, L.D.: The influence of surface dents and grooves on traction in sliding EHD point contacts. ASLE Trans. 26(3), 306-310 (1982)
14. Ai, X., Cheng, H.S.: The influence of moving dent on point EHL contacts. Tribol. Trans. 37(2), 323-335 (1994)
15. Ai, X., Lee, S.C.: Effect of slide-to-roll ratio on interior stresses around a dent in EHL contacts. Tribol. Trans. 39(4), 881-889 (1996)
16. Xu, G., Nickel, D.A., Sadeghi, F., Ai, X.: Elasto-plastohydrodynamic lubrication with dent effects. Proc. Instn. Mech. Engrs. J. Engng. Tribol. 210, 233-245 (1996)
17. Wan, G.T.Y., Spikes, H.A.: The behavior of suspended solid particles in rolling and sliding elastohydrodynamic contacts. Tribol. Trans. 31(1), 12-21 (1988)
18. Hamer, J.C., Sayles, R.S., Ioannides, E.: Particle deformation and counterface damage when relatively soft particles are Squashed Between Hard Anvils. Tribol. Trans. 32(3), 281-288 (1989)
19. Dwyer-Joyce, R.S., Hamer, J.C., Sayles, R.S., Ioannides, E.: Lubricant screening for debris effects to improve fatigue and wear life. In: Dowson, D., et al. (eds.) Proceedings of the 18th Leeds-Lyon symposium on tribology, Lyon, France, 1991, pp. 57-63. Elsevier, Amsterdam (1992)
20. Nélias, D., Sainsot, P., Flamand, L.: Deformation of a particular metallic contaminant and role on surface damage in high-speed ball bearings. In: Dowson, D., et al. (eds.) Proceedings of the 18th Leeds-Lyon symposium on tribology, Lyon, France, 1991, pp. 145-151. Elsevier, Amsterdam (1992)
21. Cann, P.M.E., Hamer, J.C., Sayles, R.S., Spikes, H.A., Ioannides, E.: Direct observation of particle entry and deformation in rolling EHD contact. In: Dowson, D., et al. (eds.) Proceedings of the 22nd Leeds-Lyon symposium on tribology, Lyon, France, 1995, vol. 31, pp. 127-134. Elsevier, Amsterdam, Tribology Series (1996)
22. Dwyer-Joyce, R.S., Heymer, J.: The entrainment of solid particles into rolling elastohydrodynamics contacts. In: Dowson, D., et al. (eds.) Proceedings of the 22nd Leeds-Lyon symposium on tribology, Lyon, France, 1995, vol. 31, pp. 135-140. Elsevier, Amsterdam, Tribology Series (1996)
23. Ville, F., Nélias, D.: Influence of the nature and size of solid particles on the indentation features in EHL contacts. In: Dowson, D., et al. (eds.) Proceedings of the 24th Leeds-Lyon symposium on tribology, London, England, 1997, vol. 34, pp. 399-410. Elsevier, Tribology Series (1998)
24. Ville, F., Nélias, D.: An experimental study on the concentration and shape of dents caused by spherical metallic particles in EHL contacts. Tribol. Trans. 42(1), 231-240 (1999)
25. Nikas, G.K.: Mathematical analysis of the entrapment of solid spherical particles in non-conformal contacts. ASME J. Tribol. 123(1), 83-93 (2001)
26. Nikas, G.K.: Particle entrainment in elastohydrodynamic point contacts and related risks of oil starvation and surface indentation. ASME J. Tribol. 124(1), 461-467 (2002)
27. Tallian, T.E.: Prediction of rolling contact fatigue life in contaminated lubricant: Part I - Mathematical model. ASME J. Lubr. Technol. 98, 251-257 (1976)
28. Tallian, T.E.: Prediction of rolling contact fatigue life in contaminated lubricant: Part II-Experimental. ASME J. Lubr. Technol. 98, 384-392 (1976)
29. Sayles, R.S., Ioannides, E.: Debris damage in rolling bearings and its effects on fatigue life. ASME J. Tribol. 110, 26-31 (1988)
30. Dwyer-Joyce, R.S., Hamer, J.C., Sayles, R.S., Ioannides, E.: Surface damage effects caused by debris in rolling bearing lubricants, with an emphasis on friable materials. In: Rolling element bearings-towards the 21st Century, pp. 17-24. Mechanical Engineering Publications for the I. Mech. E. (1990)
31. Nixon, H.P., Zantopulos, H.: Fatigue life performance comparisons of tapered roller bearings with debris-damaged raceways. Lubr. Eng. 51(9), 732-736 (1995)
32. Xu, G., Sadeghi, F.: Spall initiation and propagation due to debris denting. Wear 201(1-2), 106-116 (1996)
33. Nikas, G.K., Sayles, R.S., Ioannides, E.: Effects of debris particles in sliding/rolling elastohydrodynamic contacts. Proc. IMechE. Part J: J. Engng Tribol. 212(5), 333-343 (1998)
34. Ville, F., Nélias, D.: Early fatigue failure due to dents in EHL contacts. Tribol. Trans. 42(4), 795-800 (1999)
35. Nikas, G.K., Ioannides, E., Sayles, R.S.: Thermal modeling and effects from debris particles in sliding/rolling EHD line contacts-A possible local scuffing mode. ASME J. Tribol. 121(2), 272-281 (1999)
36. Nikas, G.K.: An advanced model to study the possible thermomechanical damage of lubricated sliding-rolling line contacts from soft particles. ASME J. Tribol. 123(4), 828-841 (2001)
37. Gupta, V., Bastias, P., Hahn, G.T., Rubin, C.A.: Influence of indent geometry on repeated two-dimensional rolling contact. ASME J. Tribol. 117(4), 655-659 (1995)
38. Nélias, D., Jacq, C., Lormand, G., Dudragne, G., Vincent, A.: New methodology to evaluate the rolling contact fatigue performance of bearing steels with surface dents: application to 32CrMoV13 (nitrided) and M50 steels. ASME J. Tribol. 127(3), 611-622 (2005)
39. Lubrecht, A.A., Venner, C.H., Lane, S., Jacobson, B., Ioannides, E.: Surface damage-comparison of theoretical and experimental endurance lives of rolling bearings. In: Proceedings of the international tribology conference, Nagoya, Japan, 1989, pp. 185-190 (1990)
40. Lubrecht, A.A., Dwyer-Joyce, R.S., Ioannides, E.: Analysis of the influence of indentations on contact life. In: Dowson D., et al. (eds.) Proceedings of the 18th Leeds-Lyon symposium on tribology, Lyon, France, 1991, pp. 173-181. Elsevier, Amsterdam (1992)
41. Ai, X.L., Nixon, H.P.: Fatigue life reduction of roller bearings due to debris denting: Part I-Theoretical modeling. STLE Tribol. Trans. 43(2), 197-204 (2000)
42. Ai, X.L., Nixon, H.P.: Fatigue life reduction of roller bearings due to debris denting: Part II-Experimental validation. STLE Tribol. Trans. 43(2), 311-317 (2000)
43. Xu, G., Sadeghi, F., Cogdell, J.D.: Debris denting effects on elastohydrodynamic lubricated contacts. ASME J. Tribol. 119(3), 579-587 (1997)
44. Kaneta, M., Kanada, T., Nishikawa, H.: Optical interferometric observations of the effects of a moving dent point contact EHL. In: Dowson, D., et al. (eds.) Proceedings of the 23rd Leeds-Lyon symposium on tribology, Leeds, UK, 1996, vol. 32, pp. 69-79. Elsevier, Amsterdam, Tribology Series (1997)
45. Nélias, D., Dumont, M.-L., Couhier, F., Dudragne, G., Flamand, L.: Experimental and theoretical investigation on rolling contact fatigue of 52100 and M50 steels under EHL or micro-EHL conditions. ASME J. Tribol. 120(2), 184-190 (1998)
46. Xu, G., Sadeghi, F., Hoeprich, M.R.: Dent initiated spall formation in EHL rolling/sliding contacts. ASME J. Tribol. 120(3), 453-462 (1998)
47. Zhao, J., Sadeghi, F., Nixon, H.M.: A finite element analysis of surface pocket effects in hertzian line contact. ASME J. Tribol. 122(1), 47-54 (2000)
48. Ko, C.N., Ioannides, E.: Debris denting-the associated residual stresses and their effect on the fatigue life of rolling bearing: an FEM analysis. In: Dowson, D., et al. (eds.) Proceedings of the 15th Leeds-Lyon symposium on tribology, Leeds, England, 1988, pp. 199-207. Butterworths (1989)
49. Xu, G., Sadeghi, F., Hoeprich, M.R.: Residual stresses due to debris effects in EHL Contacts," Tribol. Trans. 40(4), 613-620 (1997)
50. Jacq, C., Nélias, D., Lormand, G., Girodin, D.: Development of a three-dimensional semi-analytical elastic-plastic contact code. ASME J. Tribol. 124(4), 653-667 (2002)
51. Jacq, C., Lormand, G., Nélias, D., Girodin, D., Vincent, A.: On the influence of residual stresses in determining the micro-yield stress profile in a nitrided steel by nano-indentation. Mater. Sci. Eng. A 342, 311-319 (2003)
52. Kang, Y.S., Sadeghi, F., Hoeprich, M.: A finite element model for spherical debris denting in heavily loaded contacts. ASME J. Tribol. 126, 71-80 (2004)
53. Nélias, D., Jacq, C., Lormand, G., Dudragne, G., Vincent, A.: New methodology to evaluate the rolling contact fatigue performance of bearing steels with surface dents-application to 32CRMOV13 nitrided and M50 steels. ASME J. Tribol. 127(3), 611-622 (2005)
54. Vincent, A., Nélias, D., Jacq, C., Robin, Y., Dudragne, G.: Comparison of fatigue performances of 32CrMoV13 and M50 steels in presence of surface indents. J. ASTM Int. 3(2), 1-11 (2006)
55. Howell, M.B., Rubin, C.A., Hahn, G.T.: The effect of dent size on the pressure distribution and failure location in dry point frictionless rolling contacts. ASME J. Tribol. 126(3), 413-421 (2004)
56. Ioannides, E., Harris, T.A.: A new fatigue life model for rolling bearings. ASME J. Tribol. 107, 367-378 (1985)
57. Dang Van, K., Maitournam, M.H.: On some recent trends in modelling of contact fatigue and wear in rail. Wear. 253(1-2), 219-27 (2002)
58. Sainsot, P., Jacq, C., Nélias, D.: A numerical model for elastoplastic rough contact. Comput. Model. Eng. Sci., 3, 497-506 (2002)
59. Boucly, V., Nélias, D., Liu, S., Wang, Q.J., Keer, L.M.: Contact analyses for bodies with frictional heating and plastic behavior, ASME J. Tribol. 127(2), 355-64 (2005)
60. Wang, F., Keer, L.M.: Numerical simulation for three dimensional elastic-plastic contact with hardening behavior. ASME J. Tribol. 127, 494-502 (2005)
61. Popescu, G., Morales-Espejel, G.E., Wemekamp, B., Gabelli, A.: An engineering model for three-dimensional elastic-plastic rolling contact analyses. Tribol. Trans. 49, 387-399 (2006)
62. Popescu, G., Gabelli, A., Morales-Espejel, G.E., Wemekamp, B.: Micro-plastic material model and residual fields in rolling contact. J. ASTM Int. 3, 1-12 (2006)
63. Nélias, D., Boucly, V., Brunet, M.: Elastic-plastic contact between rough surfaces: Proposal for a wear or running-in model. ASME J. Tribol. 128(2), 236-244 (2006)
64. Boucly, V., Nélias, D., Green, I.: Modeling of the rolling and sliding contact between two asperities. ASME J. Tribol. 129(2), 235-245 (2007)
65. Nélias, D., Antaluca, E., Boucly, V., Cretu, S.: A 3D semi-analytical model for elastic-plastic contact under normal and tangential loading. ASME J. Tribol. 129(4), 761-771 (2007)
66. Nélias, D., Antaluca, E., Boucly, V.: Rolling of an elastic ellipsoid upon an elastic-plastic flat. ASME J. Tribol. 129(4), 791-800 (2007)
67. Chen, W.W., Wang, Q.J., Liu, Y., Chen, W., Cao, J., Xia, C., Talwar, R., Lederich, R.: Analysis and convenient formulas for elasto-plastic contacts of nominally flat surfaces: Average gap, contact area ratio, and plastically deformed volume. Trib. Lett. 28(1), 27-38 (2007)
68. Robin, Y., Nélias, D., Vincent, A.: Etude et modélisation de la fatigue de contact des aciers à roulements aéronautiques avec amorçage de l'endommagement en surface. Technical Report, Snecma/SNR, (2006)
69. Polonsky, I.A., Keer, L.M.: A numerical method for solving rough contact problems based on the multi-level multi-summation and conjugate gradient techniques. Wear 231, 206-219 (1999)
70. Liu, S., Wang, Q., Liu, G.: A versatile method of discrete convolution and FFT (DC-FFT) for contact analyses. Wear 243, 101-111 (2000)
71. Fotiu, P.A., Nemat-Nasser, S.: A universal integration algorithm for rate-dependant elastoplasticity. Comput. Struct. 59, 1173-1184 (1996)
72. Wang, W., Wong, P.L., He, F., Wan, G.T.Y.: Experimental study of the smoothing effect of a ceramic rolling element on a bearing raceway in contaminated lubrication. Trib. Lett. 28(1), 89-97 (2007)
73. Lemaitre, J., Chaboche, J.-L.: Mechanics of solid materials. Cambridge University Press, Cambridge (1990)