Soot wear in diesel engines

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 220, Issue 5, 2006, Pages 463-469

  Yamaguchi, E S ^a   Utermann, M ^a   Roby, S H ^a   Ryason, S H ^b   Yeh, S W ^c  

^a CHEVRON ORONITE COMPANY LLC   (United States)

^b Tamalpais Tribology   (United States)

^c ChevronTexaco Energy Technology Co   (United States)

Author keywords

Boundary; Mixed lubrication; Soot; Stribeck curves; Wear

Indexed keywords

DIESEL ENGINES; FUEL ADDITIVES; LUBRICATING OILS; LUBRICATION; SOOT; X RAY PHOTOELECTRON SPECTROSCOPY;

BALL-ON-DISC SLIDING WEAR TEST; BOUNDARY LUBRICATION; MIXED LUBRICATION; STRIBECK CURVES;

WEAR OF MATERIALS;

DIESEL ENGINES; FUEL ADDITIVES; LUBRICATING OILS; LUBRICATION; SOOT; WEAR OF MATERIALS; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 33749430784     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501J00505     Document Type: Article

References (39)

1. Mc Geehan, J. A. Diesel engine oils for a new era of low emission vehicles: status of oil category for 2007. Proceedings of 14th International Colloquium of Tribology and Lubricating Engineering, Stuttgart/Ostfildern, Germany, 13-15 January 2004, pp. 1-21.
2. Bovington, C. and Castle, R. Lubricant chemistry including the impact of legislation. In Boundary and mixed lubrication: science and applications, Tribology series 41 (Eds D. Dowson et al.), 2002, pp. 141-146 (Elsevier B.V., Amsterdam, The Netherlands).
3. Spikes, H. A. and Oliver, A. V. Basics of mixed lubrication. Lubr. Sci., 2003, 16(1), 3-28.
4. Urbakh, M., Klafter, J., Gourdon, D., and Israelachvili, J. The nonlinear nature of friction. Nature, 2004, 430, 525-528.
5. Chiñas-Castillo, F. and Spikes, H. A. The behavior of diluted sooted oils in lubricated contacts. Tribol. Lett., 2004, 16(4), 317-321.
6. Chiñas-Castillo, F. and Spikes, H. A. The behavior of collodial solid particles in elastohydrodynamic contacts. Tribol. Trans., 2000, 43(3), 387-394.
7. Yamaguchi, E. S. Friction and wear measurements using a modified MTM tribometer, IP.com J. 7, 2002, 2(9), 57-58, No. IPCOM000009117D.
8. Rounds, F. G. Carbon, cause of diesel engine wear? Proceedings of the Automotive Engineering Congress, Detroit, MI, 26-30 September 1977, SAE paper 770829 (Society for Automotive Engineers, Warrendale, PA).
9. Godfrey, D. Discussion of SAE Paper 770829. Proceedings of the Automotive Engineering Congress, Detroit, MI, 26-30 September 1977, SAE paper 770829 (Society for Automotive Engineers, Warrendale, PA).
10. Yamaguchi, E. S., Wilson, D. M., Kasrai, M., and Bancroft, G. M. XANES analysis of used engine oils and relationship to wear. Tribol. Trans., 2002, 45(4), 437-443.
11. Hosonuma, K., Yoshida, K., and Matsunaga, A. The decomposition products of zinc dialkyldithiophosphate in an engine and their interaction with diesel soot. Wear, 1985, 103, 287-309.
12. Berbezier, I., Martin, J. M., and Kapsa, P. The role of carbon in lubricated mild wear. Tribol. Int., 1986, 19, 115-122.
13. Nagai, I., Endo, H., Nakamura, H., and Yano, H. Soot and valve train wear in passenger car diesel engines. SAE paper 831757, 1983.
14. Ratoi, M., Castle, R. C., Bovington, C. H., and Spikes, H. A. The influence of soot and dispersant on ZDDP film thickness and friction. Lubr. Sci., 2004, 17-1, 25-43.
15. Ryason, P. R., Chan, I. Y., and Gilmore, J. T. Polishing wear by soot. Wear, 1990, 137, 15-24.
16. Narita, K. The Effects of Diesel Soot on Engine Oil Performance, Jpn J. Trib., 1997, 42, 677-683.
17. Mc Geehan, J. A., Rynbrandt, J. D., and Hansel, T. J. Effect of oil formulations in minimizing viscosity increase and sludge due to diesel engine soot. SAE paper 841370, 1984.
18. Krieger, I. M. and Dougherty, T. J. A mechanism for non-Newtonian flow in suspensions of rigid spheres. Trans. Soc. Rheol., 1959, 3, 137-152.
19. Ryason, P. R. and Hansen, T. P. Voluminosity of soot aggregates: a means of characterizing soot-laden oils. SAE paper 912343, 1991.
20. Kornbrekke, R. E., Patrzyk-Semanik, P., Kirchner-Jean, T., Galic Raguz, M., and Bardasz, E. A. Understanding soot mediated oil thickening part 6. Base oil effects. SAE paper 982665, 1998.
21. Georges, E., Georges, J. M., and Hollinger, S. Contact of two carbon surfaces covered with a dispersant polymer. Langmuir, 1997, 13, 3454-3463.
22. Pugh, R. J., Matsunaga, T., and Fowkes, F. M. The dispersability and stability of carbon black in media of low dielectric constant. 1. Electrostatic and steric conditions to colloidal stability. Colloids Surf., 1983, 7, 183-207.
23. Dubois-Clochard, M.-Cl., Durand, J.-P., Delfort, B., Gateau, P., Barré, L., Blanchard, I., and Chevalier, Y. Adsorption of polyisobutenylsuccinimide derivatives at a solid-hydrocarbon interface. Langmuir, 2001, 17, 5901-5910.
24. Devlin, M. T., Li, S., Burgess, T., and Jao, T.-C. Film formation properties of polymers in the presence of abrasive contaminants. SAE paper 2002-21-2793, 2002.
25. Kasrai, M., Fuller, M. S., Bancroft, G. M., Yamaguchi, E. S., and Ryason, P. R. X-ray absorption study of the effect of calcium sulfonate on antiwear film formation generated from neutral and basic ZDDPs, part 1. phosphorus species. Tribol. Trans., 2003, 46(4), 534-542.
26. Bair, S. and Winer, W. O. The high pressure, high shear stress rheology of liquid lubricants. ASME J. Tribol., 1992, 114(1), 1-13.
27. Archard, J. F. Friction between metal surfaces. Wear, 1986, 113(2), 3-16.
28. Jacobson, B. Mixed lubrication. Wear, 1990, 136, 99-116.
29. Papay, A. G. Antiwear and extreme pressure additives in lubricants. Lubr. Sci., 1998, 10(3), 209-224.
30. Gunsel, S., Smeeth, M., and Spikes, H. A. Friction and wear reduction by boundary film forming viscosity index improvers. SAE paper 962037, 1996.
31. Spikes, H. A. and Chiñas-Castillo, F. Behavior of colloidally-dispersed solid particles in very thin film lubricated contacts. In Thinning films and tribological interfaces, (Eds D. Dowson et al.), 2000, pp. 719-731 (Elsevier B.V., Amsterdam, The Netherlands).
32. Ratoi, M., Spikes, H. A., and Bovington, C. Langmuir-Blodgett films in high pressure rolling contacts. Tribol. Trans., 2003, 46(1), 24-30.
33. Yoshizawa, H. and Israelachvili, J. Relation between adhesion and friction forces across thin films. Thin Solid Films, 1994, 246, 71-76.
34. Kingsbury, E. Tribology in slow rolling bearings. Proceedings of the Materials Research Society Symposium, 1989, 140, 37-442.
35. Quinn, T. F. J. The role of oxide films in the friction and wear of metals. In Microscopic aspects of adhesion and lubrication, tribology series 7 (Ed. J. M. Georges), 1982, pp. 579-597 (Elsevier B.V., Amsterdam, The Netherlands).
36. Tallian, T. E. Lubricant films in rolling contact with rough surfaces. ASLE Trans., 1964, 7(2), 109-126.
37. Holm, R. Electrical contacts, 1946, pp. 114-120 (Gebers, Stockholm).
38. Myshkin, N. K. and Konchits, V. V. Evaluation of the interface of boundary lubrication using the measurement of electric conductivity. Wear, 1994, 172(1), 29-40.
39. McGeehan, J. A. and Ryason, P. R. Preventing catastrophic camshaft lobe failures in low emission diesel engines. SAE paper 2000-01-2949, 2000.