Wear debris and associated wear phenomena-fundamental research and practice

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 214, Issue 1, 2000, Pages 79-105

  Roylance, B J ^a,b,c  

^a SWANSEA UNIVERSITY   (United Kingdom)

^b UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^c UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

Wear debris and particles; Wear mechanisms and modes

Indexed keywords

WEAR; WEAR DEBRIS;

EID: 0034127624     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/1350650001543025     Document Type: Article

References (152)

1. Dowson, D. History ofTribology 1979, 677 pp. (Longmans, London).
2. Moubray, J. Reliability-centred Maintenance, 1991, 320 pp. (Butterworth-Heinemann, London).
3. Stevens, T. Power of prediction. Industry Week, 1994, 243, 45-47.
4. Neale, M. J. A Guide to the Condition Monitoring of Machinery, 1979 (Department of Industry, Council for Terotechnology, HMSO, London).
5. Davies, A. (Ed.) Handbook of Condition Monitoring, 1997 (Chapman and Hall, London).
6. Seiffert, W. W. and Westcott, V. C. A method for the study of wear particles in lubricating oil. Wear, 1972, 21, 27-42.
7. Jones, M. II. (Ed.) Proceedings of the International Conference on Fermgraphy, University of Wales Swansea, 1982.
8. Seiffert, W. W. and Westcott, V. C. A method for the study of wear particles in lubricating oil. Wear, 1972, 21, 27-42.
9. Humphrey, G. R. and Martin, R. W. (Eds) Joint Oil Analysis Program International Conference on Condition Monitoring, 1998 (JOAP, Mobile, Alabama).
10. Dovvson, D., Taylor, C. M., Childs, T. H. C., Godet, M. and Dal, G. (Eds) Wear Particles: From the Cradle to the Grave, Proceedings of the 18th Leeds-Lyon Symposium on Tribology, 1991 (Elsevier, Amsterdam).
11. Hutchings, I. M. (Ed.) Nm' Directions in Tribology, Proceedings of the First World Tribology Congress, 1997 (Mechanical Engineering Publications, London).
12. Yarrow, A. and Gadd, P. The role of ferrography in the monitoring of helicopter assemblies. In Proceedings of the International Conference on Condition Monitoring, Swansea, 1984, pp. 503-524.
13. Garvey, R. Case histories and cost savings using in-shop analysis for industrial plant applications. In Proceedings of the International Conference on Condition Monitoring, Swansea, 1985, pp. 442-457.
14. Wyatt, S. J. F. Practical condition monitoring. In Proceedings of the International Conference on Condition Monitoring, Swansea., 1987, pp. 30-57.
15. Toms, L. A. Machinery Oil Analysis, 1995 (Coastal Skills Training, Virginia).
16. Rajan, B. S. Cost benefit analysis of condition monitoring in batch process plants. PhD thesis, University of Wales Swansea, 1998.
17. Bowen, E. R. and Westcott, V. C. Wear particle atlas. Final Report to Naval Engineering Center, Lakehurst, New Jersey, Contract NO 156-74-C-182, 1976.
18. Anderson, D. P. Wear particle atlas, revised. Report NAEC-92.163, Naval-Army Engineering Center, 1982.
19. Roylance, B. J. and Hunt, T. M. Wear Debris Analysis, Machine and Systems Condition Monitoring Series, 1999 (Coxmoor Publishing, Oxford).
20. Hunt, T. M. Handbook of Wear Debris Analysis and Particle Detection in Fluids, 1993 (Elsevier, Amsterdam).
21. Ding, J. G. A computerised wear particle atlas for ferrogram filtergram analysis. In Proceedings of the JOAP International Conference on Condition Monitoring (Eds G. R. Humphrey and R. \V. Martin), 1998, pp. 125-131 (JOAP, Mobile, Alabama).
22. Roylance, B. J. Wear studies through particle size distribution application of the Weibull distribution to ferrography. 'ear, 1983, 90(1), 113-136.
23. Raadnui, S. and Roylance, B. J. The classification of wear shape. STLEJ. Liibric. Engng, 1995, 51(5), 432-437.
24. Roylance, B. J. Monitoring wear using debris analysisprospects for establishing a prognostic method. In Proceedings of the Fifth Eurotribology Congress, Helsinki, 1989, Vol. 4, pp. 85-92.
25. Kirk, T. B., Stachowiak, G. W., Warton, A. and Carrol, G. J. Fractal parameters and computer image analysis applied to wear particles isolated by ferrography. Wear, 1991, 145, 347-365.
26. Hamblin, M. G. and Stachowiak, G. W. A multi-scale measure of particle abrasivity. Wear, 1995, 185, 225-233.
27. Myshkin, N. K., Kwon, O. K., Grigoriev, A. Y., Ahis, H. S. and Hong, H. Classification of wear debris using a neural network. Wear, 1997, 203-204, 658-662.
28. BanvcII, F. T., Bowen, E. R., Bowen, J. P. and Westcott, V. C. The use of temper colours in ferrography. Wear, 1977, 44, 163-171.
29. Price, A. L. and Roylance, B. J. Image analysis and other metallographic techniques as an aid to machinery health monitoring. Microstruct. Sei., 1981, 9, 123-136.
30. Stachowiak, G. W. Numerical characterisation of wear particle morphology. In New Directions in Tribology, Proceedings of the First World Tribology Congress (Ed. I. M. Hutchings), 1997, pp. 371-389 (Mechanical Engineering Publications, London).
31. Russ, J. C. Fractal Surfaces, 1994 (Plenum, New York).
32. Barraclough, T. G., Sperring, T. P., Roylance, B. J., Nowell, T. and Hodges, D. Generic-based wear debris identification-the first step towards morphological classification. In Proceedings of the International Conference on Condition Monitoring (Ed. M. H. Jones), Swansea, 1999, pp. 525-538 (Coxmore Publishing, Oxford).
33. Reda, A. A., Bowen, E. R. and Westcott, V. C. Characteristics of particles generated at the interface between sliding steel surfaces. Wear, 1975, 34, 261-273.
34. Johnson, K. L. Regimes of elastohydrodynamic lubrication. J. Mech. Engng Sei., 1970, 12(1), 9-16.
35. Kruschov, M. M. Resistance of metals to wear by abrasion, as related to hardness. In Proceedings of the Conference on Lubrication and Wear, London, 1957, pp. 655-659 (Institution of Mechanical Engineers, London).
36. Richardson, R. C. D. The wear of metals by hard abrasives. Wear, 1967, 10, 291-304.
37. Clayton, P. and Danks, D. Effect of interlamellar spacing on the wear resistance of eutectoid steels under rolling-sliding conditions. Wear, 1990, 135, 369-389.
38. Archard, J. F. Contact and rubbing of flat surfaces. J. Appl. Phys., 1953, 24, 981-988.
39. Archard, J. F. and Hirst, W. The wear of metals under unlubricated conditions. Proc. R. Soc. Land. A, 1956, 236, 397-410.
40. Rabinowicz, E. Friction and Wear of Materials, 1965 (John Wiley, New York).
41. Zum Galir, K.-H. Micro-structure and Wear of Materials, 1987 (Elsevier, Amsterdam).
42. Zum Gahr, K.-H. Wear by hard particles. Tribology Int., 1999, 31, 587-596.
43. Hsu, S. M. and Shen, M. C. Ceramic wear maps. Wear, 1996, 200, 154-175.
44. Wang, Y. S. and Hsu, S. M. Wear and wear transition mechanisms of ceramics. Wear, 1996, 195, 35-46, 112-122.
45. Abebe, M. and Appl, F. C. Theoretical analysis of the basic mechanics of abrasive processes. Wear, 1988, 126, 251-266, 267-283.
46. Abildgaard, T. Prediction of force components acting on a ploughing cone by means of three-dimensional upper bound theory. In Proceedings of International Conference on Advanced Technology of Plasticity, Tokyo, 1984, pp. 121-126.
47. Buttery, T. C. and Archard, J. F. Grinding and abrasive wear. Proc. Instn Mech. Engrs, 1970-1, 185, 537-551.
48. Buttery, T. C. and Haincd, M. S. Some factors affecting the efficiency of individual grits in some simulated grinding experiments. Wear, 1977, 44, 231-245.
49. Gilormini, P. and Felder, E. Theoretical and experimental study of ploughing of rigid-plastic semi-infinite body by a rigid pyramidal indenter. Wear, 1983, 88, 195-206.
50. Mulhearn, T. O. and Samuels, L. E. The abrasion of metals: a model of the process. Wear, 1962, 5, 478-498.
51. Murray, M. J., Mutton, P. J. and Watson, J. D. Abrasive wear mechanisms in steel. J. Lubric. Technol, 1982, 104, 9-16.
52. Scrutton, R. F. and Youssef, N. The action of build-up when scraping with rough conical tools. Wear, 1970, 15, 411-421.
53. Scdriks, A. J. and Mulhearn, T. O. Mechanics of cutting and rubbing in simulated abrasive processes. Wear, 1963, 6, 457-466.
54. Torrance, A. A. A three dimensional cutting criterion for abrasion. Wear, 1988, 123, 87-96.
55. Tsukizoe, T. and Sakamoto, T. Friction in scratching without metal transfer. Bull. Jap. Soc. Mech. Engrs, 1975, 18, 65-72.
56. Zum Gahr, K.-H. Formation of wear debris by the abrasion of ductile metals. Wear, 1982, 90, 351-373.
57. Williams, J. A. Analytical models of scratch hardness. Tribology Int., 1996, 29, 675-694.
58. Williams, J. A. The laboratory simulation of abrasive wear. Tribotesting, 1997, 3, 267-306.
59. Kato, K., Hokkirigawa, K., Kayaba, T. and Endo, Y. Three dimensional shape effect on abrasive wear. Trans. ASME, J. Tribology, 1986, 108, 346-351.
60. Avitzur, B. and Talbert, S. H. In Plasticity and Modern Metal Forming (Ed. T. Blazynski), 1989, pp. 17-47 (Elsevier, Amsterdam).
61. Azarkhin, A. and Richmond, O. On friction of ploughing by rigid asperities in the presence of straining-upper bound method. Trans. ASME, J. Tribology, 1990, 112, 324-329.
62. Azarkhin, A. and Richmond, O. Further results on the friction of ploughing in the presence of bulk straining. Trans. ASME, J. Tribology, 1991, 113, 789-794.
63. Azarkhin, A. and Richmond, O. A generalisation of the upper bound method with particular reference to the problem of a ploughing indenter. J. Appl. Mech., 1992, 56, 10-14.
64. Jacobson, S., Wallen, P. and Hogmark, S. Correlation between groove size, wear rate and topography of abraded surfaces. Wear, 1987, 115, 83-93.
65. Garrison, VV. M. Abrasive wear resistance: the effect of ploughing and the removal of ploughed material. Wear, 1986, 114, 239-247.
66. Zum Gahr, K.-H. Modelling of two-body abrasive wear, (('ear, 1988, 124, 87-102.
67. Gâhlin, R. and Jacobson, S. The particle size effect in abrasion studied by controlled abrasive surfaces. Wear, 1999, 224, 118-125.
68. Williams, J. A. and Xic, Y. The generation of wear surfaces through the interaction of parallel grooves. Wear, 1992, 155, 363-379.
69. Ernst, H. and Merchant, M. E. Chip formation, friction and high quality machined surfaces. Trans. Am. Soc. Metals, 1941, 29, 299-378.
70. Green, A. P. The plastic yielding of metal junctions due to combined shear and pressure. J. Mechanics Physics Solids, 1954, 2, 197-201.
71. Petryk, H. Slip line field solutions for sliding contact. In Proceedings of the Conference on Friction, Lubrication and Wear, London, 1987, pp. 987-994 (Mechanical Engineering Publications, London).
72. Challen, J. M. and Oxley, P. L. B. An explanation of the different regimes of friction and wear using asperity deformation models. Wear, 1979, 53, 229-243.
73. Torrance, A. A. and Buckley, T. R. A slip-line field model of abrasive wear. Wear, 1996, 196, 35-45.
74. Kapoor, A. and Johnson, K. L. Plastic ratchetting as a mechanism of metallic wear. Proc. R. Soc. Land. A, 1994, 445, 367-381.
75. Breeder, J. J. and Heijnekamp, J. W. Abrasive wear of journal bearings by particles in the oil. Proc. Instn Mech. Engrs, 1965-6, 180 (3K), 21-31.
76. Tao, F. F. and Appeldoorn, J. K. An experimental study of the wear caused by loose abrasive particles in oil. Trans. ASLE, 1969, 13, 169-178.
77. Rabinowicz, E., Dunn, L. A. and Russell, P. G. A study of wear under three-body conditions. Wear, 1961, 4, 345-355.
78. Torrance, A. A. and d'Art, J. M. A study of lubricated abrasive wear. Wear, 1986, 110, 49-59.
79. loannides, E., Behgini, E., Jacobson, B., Bergung, G. and Wuttkowski, J. G. Cleanliness and its importance to bearing performance. Lubric. Engng, 1993, 49(9), 657-663.
80. Ronen, A. and Malkin, S. Investigation of friction and wear of dynamically loaded hydrodynamic bearings with abrasive contaminants. J. Lubric., 1983, 105, 559-568.
81. Williams, J. A. and Hyncica, A. M. Mechaisms of abrasive wear in lubricated contacts. Wear, 1992, 152, 57-64.
82. Dwyer-Joyce, R. S., Sayles, R. S. and loannides, E. An investigation into the mechanisms of closed three-body abrasive wear. Wear, 1994, 175, 133-142.
83. Mehan, R. L. The wear of selected materials in mineral oil containing a solid contaminant. Wear, 1988, 124, 65-85.
84. Sayles, R, S., Hamer, J. C. and loannides, E. The effect of particulate contamination in rolling bearings-a state of the art review. Proc. Instn Mech. Engrs, Part G, Journal of Aerospace Engineering, 1990, 204(G1), 29-36.
85. Loewenthal, S. H. and Moyer, D. W. Filtration effects on ball bearing life and condition in a contaminated lubricant. Trans. ASME, J. Lubric. Technol., 1979, 101, 171-179.
86. Roach, A. E. Performance of oil film bearings with containing lubricant. Trans. ASME, 1951, 73, 677-686.
87. Ronen, A. and Malkin, S. Wear mechanisms of statically loaded hydrodynamic bearings by contaminant abrasive particles, wear, 1981, 68, 371-389.
88. Xuan, J. I., Hong, I. T. and Fitch, E. C. Hardness effect on three-body abrasive wear under fluid film lubrication. Trans. ASME, J. Tribology, 1989, 111, 35-40.
89. Bressan, J. D., Genin, G. M. and Williams, J. A. The influence of pressure, boundary film shear strength and elasticity on the friction between a hard asperity and a deforming softer surface. In Proceedings of the 24th Leeds-Lyon Symposium on Tribology (Eds D. Dowson et al.), 1998.
90. Johnson, K. L. Contact Mechanics, 1985 (Cambridge University Press, Cambridge).
91. Johnson, K. L. The application of shakedown principles in rolling and sliding contact. Enr. J. Mechanics A, Solids, 1992, 11 (Special Issue), 155-172.
92. Williams, J. A., Dyson, I. N. and Kapoor, A. Repeated loading, residual stresses, shakedown and tribology. J. Mater. Res., 1999, 14, 1548-1559.
93. Vang, Y. and Torrance, A. A. Wear by plastic ratchetting; an experimental evaluation. Wear, 1996, 196, 147-155.
94. Mervvin, J. E. and Johnson, K. L. An analysis of plastic deformation in rolling contact. Proc. Instn Mech. Engrs, 1963, 177, 676-689.
95. Jiang, Y. and Schitoglu, H. Rolling contact stress analysis with the application of a new plasticity model. Wear, 1996, 191, 35-44.
96. Bower, A. F. and Johnson, K. L. The influence of strain hardening on the cumulative plastic deformation in rolling and sliding line contact. J. Mechanics Physics Solids, 1980, 37, 471-493.
97. Akagaki, T. and Kato, K. Plastic flow processes in flow wear under boundary lubricated conditions. Wear, 1987, 117, 179-196.
98. Kuo, S. M. and Rigney, D. A. Sliding behaviour of aluminium. Mater. Sei. Engng, 1992, A157, 131-139.
99. Kapoor, A. Wear by plastic ratchetting. Wear, 1997, 212, 119-130.
100. Jahanmir, S. On the mechanics and mechanisms of laminar wear particle formation. Adv. Mechanics Physics Surf., 1986, 3, 261-332.
101. Kapoor, A., Johnson, K. L. and Williams, J. A. A model for the mild ratchetting wear of metals. Wear, 1996, 200, 3844.
102. Greenwood, J. A. and Williamson, J. P. B. Contact of nominally flat surfaces. Proc. R. Soc. Land. A, 1966, 295, 300-330.
103. Mikic, B. B. Thermal contact conductance: theoretical considerations. //;J. J. Heat Mass Transfer, 1974, 17, 205214.
104. Odi-Owei, S., Roylance, B. J. and Xie, L. Z. An experimental study of initial scuffing and recovery in sliding wear using the four-ball machine. Wear, 1987, 177(3), 267287.
105. Alkateb, A. H. and Roylance, B. J. Further developments in contact temperature in four-ball machine operation and the tribological implications. In Proceedings of the IMechE International Conference on Friction and Wear-50 Years On, London, 1987, pp. 399-410 (Mechanical Engineering Publications, London).
106. Kwon, O. K. A study of the interaction of chemical, thermal and mechanical factors in a lubricated sliding contact. PhD thesis, University of Wales Swansea, 1981.
107. Xiaogang, L., Qing, C. and Eyru, S. Initiation and propagation of case crushing cracks in rolling contact fatigue. Wear, 1988, 122, 33-43.
108. Muro, H., Mori, K. and Miyata, T. Initiation and propagation of surface cracks in rolling fatigue of high hardness steel. Wear, 1975, 35, 261-282.
109. Yamamoto, T. Crack growth in lubricated rollers. In Solid Contact and Lubrication, AMD-Vol. 39, 1980, pp. 223-236 (American Society of Mechanical Engineers, New York).
110. Olver, A. V. Micropitting and asperity deformation. In Proceedings of the 10th Leeds-Lyon Symposium on Tribology (Eds D. Dowson et al.), 1984, pp. 319-323 (Butterworth, London).
111. Webster, M. N. and Norbart, C. J. J. An experimental investigation of micropitting using a roller disk machine. STLE Tribology Trans., 1995, 38, 883-893.
112. Shotter, B. A. Micropitting: its characteristics and implications on the test requirements of gear oils. Proc. Inst. Petml., 1981, 1, 91-103.
113. Sayles, R. S. and Macpherson, P. B. The influence of wear debris on rolling contact fatigue. In Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771 (Ed. J. Hoo), 1982, pp. 255-275 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
114. Lorosch, H. K. Research on longer life for rolling element bearings. Trans. ASLE, 1983, 41, 37-43.
115. Way, S. Pitting due to rolling contact. J. Appl. Mechanics, 1935, 2, A49-A58.
116. Dawson, P. H. Rolling contact fatigue crack initiation in ba 0.3% carbon steel. Proc. Instn Mech. Engrs, 1968, 183, 75-83.
117. Nakajima, A., Ichimaru, K., Hirano, F. and Nishimura, M. Effects of combination of rolling direction and sliding direction on pitting of rollers. JSLE Int., 1983, 4, 94-98.
118. Kaneta, M., Yatsuzuka, H. and Murakami, Y. Mechanism of crack growth in lubricated rolling/sliding contact. Trans. ASLE, 1985, 28, 407-414.
119. Bower, A. F. The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks. Trans. ASME, J. Tribology, 1988, 110, 704-711.
120. Beynon, J. H., Garnham, J. E. and Sawley, K. J. Rolling contact fatigue of three pearlitic rail steels. Wear, 1996, 192, 94-111.
121. Jahanmir, S. Examination of wear mechanisms in automotive camshafts. Wear, 1986, 108, 235-254.
122. Gao, N., Dwyer-Joyce, R. S. and Beynon, J. H. Effects of surface defects on rolling contact fatigue of 60/40 brass. Wear, 1989, 225-229, 983-994.
123. Xu, G., Sadeghi, F. and Hueprich, M. R. Dent initiated spall formation in EHL rolling/sliding contact. Trans. ASME, J. Tribology, 1998, 120, 453-462.
124. Cheng, W., Cheng, H. S. and Keer, L. M. Experimental investigation on rolling/sliding contact fatigue crack initiation with artificial defects. STLE Tribology Trans., 1994, 37, 1-12.
125. Nelias, D., Dimant, M.-L., Cochier, F., Dudragne, G. and Flamade, L. Experimental and theoretical investigation on rolling contact fatigue of 52100 and M50 seals under EHL and micro-EHL conditions. Trans. ASME, J. Tribology, 1998, 120, 184-190.
126. Lundberg, G. and Palmgrcn, A. Dynamic capacity of rolling bearings. Acta Polytechnica, Mech. Engng, 1947, 1 (3), 7.
127. Lundberg, G. and Palmgren, A. Dynamic capacity of rolling bearings. Acta Polytechnica, Mech. Engng, 1952, 2(4), 96.
128. Weibull, \V. Fatigue Testing and Analysis of Results, 1961 (Pergamon, Oxford).
129. 1SO/DIS281 Rolling Bearings-Dynamic Load Ratings and Rating Life, 1989 (International Standards Organization, Geneva).
130. SKF AB General Catalogue 4000 E, 1989, pp. 35-47 (SKF, Göteborg).
131. Timken Company, British Timken Division Tunken Bearing Selection and Application Handbook, 1989 (Timken Company, Duston).
132. FAG Kugelfischer Georg Schafer KGaA FAG Rolling Bearings. Standard Programme, Catalogue WL 41510/2 E A, 1989, pp. 20-26 (FAG Kugelfischer Georg Schafer, Schweinfurt).
133. Tallian, T. E. Simplified contact fatigue life prediction model. Part I: review of published models. Trans. ASME, J. Tribology, 1992, 114, 207-213.
134. Tallian, T. E. A unified model for rolling contact life prediction. Trans. ASME, J. Lubric. Teclmol, 1982, 104, 336-346.
135. loannides, E. and Harris, T. A. A new fatigue life model for rolling bearings. Trans. ASME, J. Lubric. Technol., 1985, 107, 367-378.
136. Townsend, D. P., Coy, J. J. and Zaretsky, E. V. Experimental and analytical load-life relation for AISI 9310 steel spur gears. J. Mech. Des., 1978, 100(1), 54-60.
137. Tallian, T. E. Rolling bearing life prediction, corrections for material and operating conditions. Part I: general model and basic life; Part II: the correction factors. Trans. ASME, J. Tribology, 1988, 110, 2-12.
138. Lubrecht, A. A., Jacobson, B. O. and loannides, E. Lundberg-Palmgren revisited. In Rolling Element Bearings-Towards the 21st Century, 1990, pp. 17-20 (Mechanical Engineering Publications, London).
139. Van Dang, K., Griveau, B. and Message, J. On a new multi-axial fatigue limit criterion: theory and application. In Proceedings of the Second International Conference on Biaxial/Multiaxial Fatigue, Sheffield, 1985, pp. 479-496 (Mechanical Engineering Publications, London).
140. Webster, M. N., loannides, E. and Sayles, R. S. The effects of topographical defects on the contact stress and fatigue life in rolling element bearings. In Proceedings of 12th Leeds-Lyon Symposium on Tribology, 1985, Vol. 12, pp. 121-131 (Butterworth, London).
141. Lubrecht, A. A., Venner, C. H., Lane, S., Jacobson, B. O. and loannides, E. Surface damage-comparison of theoretical and experimental lives of rolling bearings. In Proceedings of the Japan Institute of Tribology Conference, Nagoya, 1990, Vol. 1, pp. 185-190 (Japanese Society of Tribologists, Tokyo).
142. Beghini, E., Dwyer-Joyce, R. S., loannides, E., Jacobson, B. O., Lubrccht, A. A. and Tripp, J. H. Elastic/plastic contact and endurance life prediction. J. Phys. D, 1992, 25, 379-383.
143. Lubrecht, A. A., Dwyer-Joyce, R. S. and loannides, E. Analysis of the influence of indentations on contact life. In Proceedings of the 18th Leeds-Lyon Symposium on Tribology (Eds D. Dowson et al.), 1992, pp. 173-181 (Eisevier, Amsterdam).
144. Cheng, W. and Cheng, H. S. Semi-analytical modelling of crack initiation dominant contact fatigue life for rolling bearings. Trans. ASME, J. Tribology, 1997, 119, 223-240.
145. Fleming, J. R. and Suh, N. P. Mechanics of crack propagation in delamination wear. Wear, 1977, 44, 39-55.
146. Fleming, J. R. and Suh, N. P. The relationship between crack propagation rates and wear rates. Wear, 1977, 44, 56-64.
147. Hearle, A. D. and Johnson, L. K. Mode II stress intensity factors for a crack parallel to the surface of an elastic half-space subjected to a moving point load. J. Mech. Phys. Solids, 1985, 33, 61-81.
148. Murakami, Y., Kaneta, M. and Yatsuzuka, H. Analysis of surface crack propagation in lubricated rolling contact. ASLE Trans., 1985, 28, 60-68.
149. Kaneta, M., Suetsugu, M. and Murakami, Y. Mechanism of surface crack growth in lubricated rolling/sliding spherical contact. Trans. ASME. J. Appl. Mechanics, 1986, 53, 354-360.
150. Keer, L. M. and Bryant, M. D. A pitting model for rolling contact fatigue. Trans. ASME, J. Lubric. Technol., 1983, 105, 198-205.
151. Miller, G. R., Keer, L. M. and Cheng, H. S. On the mechanics of fatigue crack growth due to contact loading. Proc. R. Soc. Land. A, 1985, 397, 197-209.
152. Salehizadeh, H. and Saka, N. Crack propagation in rolling line contacts. Trans. ASME, J. Tribology, 1992, 114, 690-697.