Microstructural size effects on mechanical properties of high purity nickel

International Journal of Plasticity

Volumn 27, Issue 4, 2011, Pages 635-654

  Keller, C ^a   Hug, E ^b   Feaugas, X ^c  

^a UNIVERSITY OF LIÈGE   (Belgium)

^b CNRS   (France)

^c UNIVERSITÉ DE LA ROCHELLE   (France)

Author keywords

Dislocations; Mechanical testing; Metallic materials; Strengthening mechanisms; Transmission electron microscopy (TEM)

Indexed keywords

BACKSTRESS; DIFFERENT DOMAINS; DISLOCATIONS; GRAIN SIZE; HIGH PURITY; MECHANICAL BEHAVIOUR; MECHANICAL TESTS; METALLIC MATERIAL; MICROSTRUCTURAL SIZE EFFECTS; MULTICRYSTALLINE; POLYCRYSTALLINE; SINGLE-CRYSTALLINE; STRENGTHENING MECHANISMS; SURFACE EFFECT; TEM OBSERVATIONS;

GRAIN SIZE AND SHAPE; MATERIALS TESTING; MECHANICAL ENGINEERING; MECHANICAL TESTING; MECHANISMS; STRAIN; STRAIN HARDENING; STRENGTHENING (METAL); TRANSMISSION ELECTRON MICROSCOPY;

MECHANICAL PROPERTIES;

EID: 79952281775     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2010.08.002     Document Type: Article

References (78)

1. S. Akarapu, H.M. Zbib, and D.F. Bahr Analysis of heterogeneous deformation and dislocations dynamics in single crystals micropillars under compression International Journal of Plasticity 26 2010 239 257
2. B. Alexandreanu, B. Sencer, V. Thaveeprungsriporn, and G. Was The effect of grain boundary character distribution on the high temperature deformation behavior of Ni-16Cr-9Fe alloys Acta Materialia 51 2003 3831 3848
3. R. Armstrong On the size effects in polycrystal plasticity Journal of the Mechanics and Physics of Solids 9 1961 196 199
4. M. Ashby The deformation of plastically non-homogeneous materials Philosophical Magazine 21 1970 399 424
5. F. Barbe, S. Forest, and G. Cailletaud Intergranular, intragranular behaviour of polycrystalline aggregates International Journal of Plasticity 17 2001 537 563 (Pubitemid 32272883)
6. Z. Basinski Surface effects in uniaxial plastic deformation R.M.J.F. Latanision, Surface Effects in Crystal Plasticity 1977 Nato Advanced Study Institutes Series 66 88
7. S. Berbenni, V. Favier, and M. Berveiller Impact of the grain size distribution on the yield stress of heterogeneous materials International Journal of Plasticity 23 1 2007 114 142 (Pubitemid 44425399)
8. J. DelValle, A. Picasso, and R. Romero Work-hardening in Inconel X-750: study of stage II Acta Materialia 46 1998 1981 1988 (Pubitemid 128438470)
9. J. Dickson, J. Boutin, and L. Handfield A comparison of two simple methods for measuring cyclic internal, effective stresses Material Science, Engineering 64 1984 L7 L11
10. A. Diehl, D. Staud, and U. Engel Mechanical characterisation of metal foils by hydraulic bulge test Steel Research International 79 2008 332 339
11. D. Dimiduk, M. Uchic, and T. Parthasarathy Size-affected single slip behaviour of pure nickel microcrystals Acta Materialia 53 2005 4065 4077 (Pubitemid 41172385)
12. U. Engel, and R. Eckstein Microforming-from basic research to its realization Journal of Material Processing Technology 2002 35 44 (Pubitemid 34991916)
13. H.D. Espinosa, M. Panico, S. Berbenni, and K.W. Schwarz Discrete dislocation dynamics simulation to interpret plasticity size and surface effects in freestanding FCC thin films International Journal of Plasticity 22 2006 2091 2117 (Pubitemid 44051840)
14. U. Essmann, and H. Mughrabi Annihilation of dislocations during tensile, cyclic deformation, limits of dislocation densities Philosophical Magazine A40 1979 731 756 (Pubitemid 10445998)
15. X. Feaugas On the origin of the tensile flow stress in the stainless steel AISI 316 L at 300 K: back stress, effective stress Acta Materialia 47 13 1999 3617 3632 (Pubitemid 30503023)
16. X. Feaugas, and H. Haddou Grain-size effects on tensile behaviour of nickel, AISI 316L stainless steel Metallurgical Transactions 34A 2003 2329 2340
17. Feaugas, X., 2003. Tensile and cyclic hardening: back and effective stresses concepts and their applications. In: Tensile and Cyclic Hardening: Back and Effective Stresses Concepts and their Applications, vol. 4. Research Signpost, pp. 3617-3632.
18. X. Feaugas, and H. Haddou Effects of grain size on dislocation organization, internal stresses developed under tensile loading in FCC metals Philosophical Magazine 87 2007 989 1018 (Pubitemid 46290048)
19. J. Flinn, D. Field, G. Korth, T. Lillo, and J. Macheret The flow stress behaviour of OFHC polycrystalline copper Acta Materialia 49 2001 2065 2074 (Pubitemid 32528987)
20. J. Fourie The flow stress gradient between the surface, centre of deformed copper single crystals Philosophical Magazine 17 1967 735 756
21. J. Fourie Sub-surface dislocation structure of deformed copper Philosophical Magazine 21 1970 977 985
22. J. Fourie Surface, size effects in unloading yield point Philosophical Magazine 22 1970 923 929
23. J. Fourie The soft-surface effect in deformed α-phase Cu-5.8at.%Al Acta Metallurgica 20 1972 1291 1296
24. J. Fourie The soft-surface effect in plastically deformed aluminium South African Journal of Physics 3 1980 67 72
25. J. Fourie Soft surface effect in copper single crystals oriented for multiple glide and in polycrystalline copper Strength of Metals and Alloys Proceedings of the 7th International Conference 1986 Pergamon Press 99 104 (Pubitemid 17561321)
26. H. Fu, D. Benson, and M. Meyers Analytical and computational description of effect of grain size on yield stress of metals Acta Materialia 49 2001 2567 2582 (Pubitemid 32621528)
27. T. Fulop, W. Brekelmans, and M. Geers Size effect from grain statistics in ultra-thin metal sheets Journal of Material Processing Technology 174 2006 233 238
28. J. Gau, C. Principe, and J. Wang An experimental study on size effects on flow stress and formability of aluminium and brass microforming Journal of Material Processing Technology 184 2007 42 46 (Pubitemid 46205233)
29. M. Geiger, M. Kleiner, R. Eckstein, R. Tiesler, and U. Engel Microforming Annals of the CIRP 5 50 2001 445 462 (Pubitemid 34012686)
30. E. Hall The deformation and ageing of mild steel: III discussion of results Physical Society of London 64 1951 747 753
31. Huvier, C., Comforto, E., El Alami, H., Delafosse, D., Feaugas, X., 2009. Some correlations between slip band emergence and dislocation pattern. In: IOP Conference Series: Materials Science and Engineering, vol. 3, p. 012012.
32. P. Janssen, T. de Keijser, and M. Geers An experimental assessment of grain size effect in the uniaxial straining of thin Al sheet with a few grains across the thickness Material Science, Engineering A419 2006 238 248
33. P. Janssen, J. Hoefnagels, T. de Keijser, and M. Geers Processing induced size effects in plastic yielding upon miniaturization Journal of the Mechanics and Physics of Solids 56 8 2008 2687 2706
34. T. Kals, and R. Eckstein Miniaturization in sheet metal working Journal of Material Processing Technology 103 2000 95 101
35. C. Keller, and E. Hug Hall-Petch behaviour of Ni polycrystals with a few grains per thickness Materials Letters 62 10-11 2008 1718 1720 (Pubitemid 351192107)
36. C. Keller, E. Hug, and M. Rachik Influence of the number of grain per thickness on strain hardening and process of nickel polycrystals Steel Research International 79 2 2008 176 182
37. C. Keller, E. Hug, and D. Chateigner On the origin of the stress decrease for nickel polycrystals with few grains across the thickness Materials Science and Engineering A 500 1-2 2009 207 215
38. Keller, C., 2009b. Etude exprimentale des transitions volume/surface des propriétés mcaniques du nickel polycrystallin de haute pureté. Ph.D. Thesis, Université de Caen/Basse-Normandie.
39. C. Keller, E. Hug, R. Retoux, and X. Feaugas TEM study of dislocation patterns in near-surface and core regions of deformed nickel polycrystals with few grains across the cross section Mechanics of Materials 42 1 2010 44 54
40. Rester Kiener, Yang Scheriau, and Dehm Pippan Influence of external and internal length scale on the flow stress of copper International Journal of Material Research 98 11 2007 1047 1053
41. D. Kiener, W. Grosinger, G. Dehm, and R. Pippan A further step towards an understanding of size-dependant crystal plasticity: in situ tension experiments of miniaturized single-crystal copper samples Acta Materialia 56 2008 580 592
42. M. Klein, A. Hadrboletz, B. Weiss, and G. Khatibi The size effect on the stress-strain, fatigue, fracture properties of thin metallic foils Material Science, Engineering 2001 924 928 (Pubitemid 34103338)
43. U. Kocks, and H. Mecking Physics, phenomenology of strain hardening: the FCC case Progress in Materials Science 48 2003 171 273
44. I. Kramer The effect of surface removal on the plastic flow characteristics of metals Transactions of the Metallurgical Society of AIME 227 1963 1003 1010
45. L. Kubin, T. Hoc, and B. Devincre Dynamic recovery and its orientation dependence in face-centered cubic crystals Acta Materialia 57 8 2009 2567 2575
46. D. Kuhlmann-Wilsdorf Theory of plastic deformation: properties of low energy dislocation structures Material Science, Engineering A113 1989 1 41
47. E. Lehockey, and G. Palumbo On the creep behaviour of grain boundary engineered nickel Material Science, Engineering A237 1997 168 172
48. E. Lehockey, G. Palumbo, K. Aust, U. Erb, and P. Lin On the role of intercrystalline defects in polycrystal plasticity Scripta Materialia 39 1998 341 346 (Pubitemid 128418085)
49. P. Lin, G. Palumbo, U. Erb, and K. Aust Influence of grain boundary character distribution on sensitization, intergranular corrosion of alloy 600 Scripta Metallurgica et Materialia 33 9 1995 1387 1392
50. E. Mazza, G. Danuser, and J. Dual Light optical deformation measurements in microbars with nanometer resolution Microsystem Technologies 2 1996 83 91 (Pubitemid 126467676)
51. Mecking, H., 1977. Description of hardening curves of FCC single, polycrystals. In: Work Hardening in Tension, Fatigue. American Institute of Mining, Metallurgical, Petroleum Engineers, pp. 66-88.
52. H. Mecking, and U. Kocks Kinetics flow, strain hardening Acta Metallurgica 29 1981 1865 1875
53. J. Michel, and P. Picart Size effects on the constitutive behaviour for brass in sheet metal forming Journal of Material Processing Technology 141 2003 439 446
54. S. Miyazaki, K. Shibata, and H. Fujita Effect of specimen thickness on mechanical properties of polycrystalline aggregates with various grain size Acta Metallurgica 27 1979 855 862 (Pubitemid 9453192)
55. H. Mughrabi Investigation of plastically deformed copper single crystal in the stress applied state Physical Status Solidi 39 1970 317 327
56. H. Mughrabi Some consequences of surface, size effects in plastically deformed copper single crystals Physical Status Solidi 44 1971 391 402
57. H. Mughrabi A two-parameter description of heterogeneous dislocation distribution in deformed metal crystals Material Science, Engineering A85 1987 15 31 (Pubitemid 17588865)
58. H. Mughrabi On the current understanding of strain gradient plasticity Material Science, Engineering 2004 209 213 (Pubitemid 39648670)
59. A.K. Nair, E. Parker, P. Gaudreau, D. Karkaz, and R.D. Kriz Size effects in indentation response of thin films at the nanoscale. A molecular dynamics study International Journal of Plasticity 24 2008 2016 2031
60. T. Narutani, and J. Takamura Grain-size strengthening in terms of dislocation density measured by resistivity Acta Materialia 39 8 1991 2037 2049 (Pubitemid 21680057)
61. N. Petch The cleavage strength of polycrystals Journal of the Iron Steel Institute 174 1953 25 28
62. L. Raulea, A. Goijaerts, L. Govaert, and F. Baaijens Size effects in the processing of thin metal sheets Journal of Material Processing Technology 115 2001 44 48 (Pubitemid 32698390)
63. A. Rollet, and S. Wright Typical textures in metals Texture and Anisotropy 2000 Cambridge University Press 178 224
64. M. Rudloff, M. Risbet, C. Keller, and E. Hug Influence of the size effect on work hardening behaviour in stage II of Ni20wt.%Cr Materials Letters 62 20 2008 3591 3593
65. R. Venkatraman, and J.C. Bravman Separation of film thickness and grain boundary strengthening effect in Al thin films on Si Journal of Materials Research 7 1992 2040 2048
66. M. Sauzay Large plastic strains in surface grains Journal of Physic IV 11 2001 309 315
67. M. Sauzay, and P. Gilormini Inclusion lastoplastique en surface Compte Rendu de l'acadadmie des sciences Paris, Srie II b 328 2000 117 122
68. J.G. Sevillano Flow stress, work hardening Material Science, Technology vol. 6 1993 VCH Publishers Inc. 18 88
69. G. Simons, C. Weippert, J. Dual, and J. Villain Size effects in tensile testing of thin cold roller, annealed cu foils Material Science, Engineering A416 2006 290 299 (Pubitemid 43108750)
70. R.E. Smallman, and A.H.W. Ngan Mechanical properties I Physical Metallurgy and Advanced Materials 2007 Butterworth-Heinemann 289 381
71. J. Stolken, and A. Evans A microbend test method for measuring the plasticity length scale Acta Materialia 46 1998 5109 5115 (Pubitemid 128421651)
72. K. Sumino, Y. Kawasaki, M. Yamamoto, and M. Sumino Plastic deformation of foil copper crystals-II electron microscopical study Acta Metallurgica 11 1963 1235 1243
73. K. Sumino, and M. Yamamoto Plastic deformation of foil copper crystals-I study of work hardening behavior Acta Metallurgica 11 1963 1223 1234
74. T. Tabata, K. Takagi, and H. Fujita The effect of grain size, deformation sub-structure on mechanical properties of polycrystalline copper, Cu-Al alloys Material Transactions JIM 16 1975 569 579
75. A. Thompson Use of non-polycrystal specimens in mechanical behavior tests Scripta Metallurgica 8 1973 145 148
76. A. Thompson Effect of grain size on work hardening in nickel Acta Metallurgica 25 1977 83 86
77. F. Vollertsen, H.S. Niehoff, and Z. Hu State of the art in micro formings International Journal of Machine Tools & Manufacture 46 2006 1172 1179
78. B. Weiss, V. Groger, G. Khatibi, A. Kotas, P. Zimprich, R. Stickler, and B. Zagar Characterization of mechanical, thermal properties of thin cu foils, wires Sensors, Actuators A99 2002 172 182 (Pubitemid 34684710)