Effects of grain size on dislocation organization and internal stresses developed under tensile loading in fcc metals

Philosophical Magazine

Volumn 87, Issue 7, 2007, Pages 989-1018

  Feaugas, X ^a   Haddou, H ^b  

^a UNIVERSITÉ DE LA ROCHELLE   (France)

^b CNRS   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CRYSTAL ORIENTATION; DISLOCATIONS (CRYSTALS); GRAIN SIZE AND SHAPE; LOADS (FORCES); STRESSES; TENSILE STRENGTH;

HALL-PETCH BEHAVIOUR; STACKING FAULT ENERGY; STRAIN GRADIENTS; TENSILE LOADING;

CRYSTAL DEFECTS;

EID: 33847140674     PISSN: 14786435     EISSN: 14786443     Source Type: Journal    
DOI: 10.1080/14786430601019441     Document Type: Article

References (132)

1. R.W. Armstrong, I. Good, R.M. Douthwaite, et al., Phil. Mag. A 7 45 (1962).
2. J.C.M. Li, Trans. Metall. Soc. 227 239 (1963).
3. M.F. Ashby, Phil. Mag. 21 299 (1970).
4. J.C.M. Li and Y.T. Chou, Metall. Trans. 1 1145 (1970).
5. H. Conrad, in Ultrafine-Grain Metals, edited by J.J. Burke and V. Weiss (Syracuse University Press, New York, 1970), p. 213.
6. J.P. Hirth, Metall. Trans. 3 3047 (1972).
7. M.A. Meyers and E. Ashworth, Phil. Mag. A 46 737 (1982).
8. R.W. Armstrong, in Field, Flow and Fracture of Polycrystals, edited by T.N. Backer (Applied Science, Barking, 1983).
9. S. Forest, Mater. Res. Soc. Proc. 653 Z8.2.1 (2001).
10. S. Forest, Int. J. Solids Struct. 37 7105 (2000).
11. A. Acharya and A.J. Beaudouin, J. Mech. Phys. Solids 48 2213 (2000).
12. F. Barbe, S. Forest and G. Cailletaud, Int. J. Plast. 17 537 (2001).
13. J. Aldazabal and J. Gil Sevillano, Z. Metallkd. 93 981 (2002).
14. G. Cailletaud, S. Forest, D. Jeulin, et al., Comp. Mater. Sci 27 351 (2003).
15. H. Conrad, Mater. Sci. Eng. A 341 216 (2003).
16. H. Conrad, Metall. Trans. A 35 2681 (2004).
17. H. Conrad and K. Jung, Mater. Sci. Eng. A 391 272 (2005).
18. S.B. Biner and J.R. Morris, Phil. Mag. 83 3677 (2003).
19. D.S. Balint, V.S. Deshpande, A. Needleman, et al. Mater. Sci. Eng. A 400/401 186 (2005).
20. V. Bata and E.V. Pereloma, Acta Mater. 52 657 (2004).
21. S. Lefebvre, B. Devincre and T. Hoc, Mater. Sci. Eng. A 400/401 150 (2005).
22. G. Saada, Phil. Mag. 85 3003 (2005).
23. G. Saada and Mater., Sci. Eng. A 400/401 146 (2005).
24. H. Fujita and T. Tabata, Acta Metall. 21 355 (1973).
25. T. Tabata, K. Takagi and H. Fujita, Trans. JIM 26 569 (1975).
26. N. Hansen, Acta Metall. 25 863 (1977).
27. N. Behnood and J.T. Evans, Mater. Sci. Eng. A 55 263 (1982).
28. X. Feaugas and H. Haddou, Metall. Trans. A 34 2329 (2003).
29. H. Mecking, in Deformation in Polycrystals, edited by N. Hansen, et al. (Riso National Laboratory, Denmark, 1981), p. 73.
30. H.Haddou, Doctoral thesis, UTC, Compiegne, France (2003).
31. J.G. Rao and S.K. Varma, Metall. Trans. A 24 2559 (1993).
32. D. Sil and S.K. Varma, Metall. Trans. A 24 1153 (1993).
33. Q. Liu and N. Hansen, Phys. Status Solidi (a) 149 187 (1995).
34. N. Hansen and X. Huang, Acta Mater. 46 1827 (1998).
35. N. Hansen, X. Huang and D.A. Hughes, Mater. Sci. Eng. A 317 3 (2001).
36. X. Huang and N. Hansen, Scripta Mater. 37 1 (1997).
37. X. Huang, Scripta Mater. 38 1697 (1998).
38. X. Huang, A. Borrego and W. Pantleon, Mater. Sci. Eng. A 319/321 237 (2001).
39. X. Huang and N. Hansen, Mater. Sci. Eng. A 387/389 186 (2004).
40. X. Feaugas, HDR thesis, UTC, France (1999).
41. G. Winter, X. Huang and N. Hansen, Acta Mater. 48 2187 (2000).
42. G. Winter, Mater. Sci. Eng. A 309/310 486 (2001).
43. C. Gaudin, Doctoral thesis, UTC, France (2002).
44. C. Buque, J. Bretschneider, A. Schwab, et al., Mater. Sci. Eng. A 300 254 (2001).
45. C. Gaudin and X. Feaugas, Mater. Sci. Eng. A 209/310 382 (2001).
46. A. Schwab and C. Holste, Acta Mater. 50 289 (2002).
47. C. Holste, Phil.Mag. 84 299 (2004).
48. X. Feaugas and C. Gaudin, Acta Mater. 52 3097 (2004).
49. D.A. Hughes, Q. Lin, D.C. Chrzan, et al., Acta Mater. 45 105 (1997).
50. D.A. Hughes and N. Hansen, Acta Mater. 45 3871 (1997).
51. D.A. Hughes, D.C. Chrzan, Q. Liu, et al., Phys. Rev. Lett. 81 4664 (1998).
52. D.A. Hughes and N. Hansen, Phys. Rev. Lett. 87 135 (2001).
53. D.A. Hughes and N. Hansen, Acta Mater. 48 2985 (2000).
54. D.A. Hughes, Scripta Mater. 47 697 (2002).
55. D.A. Hughes and N. Hansen, Phil. Mag. 83 3871 (2003).
56. D.A. Hughes, N. Hansen and D.J. Bammann, Scripta Metall. 48 147 (2003).
57. A. Godfrey and D.A. Hughes, Acta Mater. 48 1897 (2000).
58. A. Godfrey and D.A. Hughes, Scripta Mater. 51 831 (2004).
59. M. Zaiser and A. Seeger, in Dislocation in Solids, edited by F.R.N. Nabarro and M.S. Duesbery, Vol. 11 (Elsevier, Amsterdam, 2002), p. 1.
60. H. Haddou, C. Gaudin and X. Feaugas, J. Phys. IV 11 Pr4-283 (2001).
61. H. Haddou, M. Risbet, G. Marichal, et al., Mater. Sci. Eng. A 379 102 (2004).
62. X. Feaugas, Acta Mater. 47 3617 (1999).
63. R. Neuhaus, P. Buchhagen, C. and Schwink, Scripta Metall. 23 779 (1989).
64. E. Underwood, Quantitative Stereology (Addison-Wesley, Reading, MA, 1970).
65. J.W. Steeds, Proc. R. Soc. A 292 343 (1965).
66. M.R. Staker and D.L. Holt, Acta Metall. 20 59 (1979).
67. E. Göttler, Phil. Mag A 28 1057 (1973).
68. P. Ambrosi, E. Göttler and C. Schwink, Scripta Metall. 8 1093 (1974).
69. H. Mughrabi, in Constituve Equations in Plasticity, edited by A.S. Argon (MIT Press Cambridge, MA, 1975), p. 199.
70. Y. Kawasaki, J. Appl. Phys. 18 1429 (1979).
71. Y. Kawasaki, Scripta Metall. 14 183 (1980).
72. Y. Kawasaki, in ICSM A10, edited by S Oikawa, et al. (The Japan Institute of Metals, Tokyo, 1994), p. 187.
73. E.S. Kayali and A. Plumtree, Metall. Trans. A 13 1033 (1989).
74. T. Narutani and J. Takamura, Acta Metall. 39 2037 (1991).
75. R. Neuhaus and C. Schwink, Phil. Mag. A 65 1463 (1992).
76. X. Feaugas, Phys. Status Solidi (a) (2006), submitted.
77. H. Fujita and S. Kimura, J. Phys. Soc. Jpn. 52 157 (1983).
78. G. Winter, D. Juul Jensen and N. Hansen, Acta Mater. 45 5059 (1997).
79. Q. Liu, D. Juul Jensen and N. Hansen, Acta Mater. 46 5819 (1998).
80. R. McCabe, A. Misra and T.E. Mitchell, Acta Mater. 52 705 (2004).
81. F.J. Humphreys and M. Hartherly, Recrystallization and Related Annealing Phenomena (Pergamon Press, Oxford, 1995).
82. W. Pantleon and N. Hansen, Acta Mater. 49 1479 (2001).
83. H. Mughrabi and Mater., Sci. Eng. A 85 15 (1987).
84. A.S. Argon, Scripta. Metall. 47 683 (2002).
85. R. Madec, B. Devincre and L.P. Kubin, Scripta Metall. 47 689 (2002).
86. H. Fujita, N. Sumida, S. Kimura, et al., J. Phys. Soc. Jpn. 51 577 (1982).
87. P.J. Jackson, Dislocations and Properties of Real Materials (The Institute of Metals, London, 1985), p. 44.
88. G. Winter, Acta Mater. 51 417 (2003).
89. M. Janecek and K. Tangri, Mater. Sci. Eng. A 138 237 (1991).
90. M. Janecek and K. Tangri, J. Mater. Sci. 30 3820 (1995).
91. G. Cailletaud, Int. J. Plast. 8 55 (1992).
92. X. Feaugas, Rec. Res. Dev. Mater. Sci. 4 35 (2003).
93. K. Hashimoto and H. Margolin, Acta Metall. 31 773 (1983).
94. K. Hashimoto and H. Margolin, Acta Metall. 31 787 (1983).
95. H. Margolin, Z. Wang and T.K. Chen, Metall. Trans. A 17 107 (1986).
96. C. Zhao and H. Margolin, Metall. Trans. A 19 1575 (1988).
97. M. Clavel and X. Feaugas, in Multiaxial Fatigue and Design, ESIS 21, edited by A. Pineau, G. Cailletaud, and T.C. Lindley (Mechanical Engineering Publications, London, 1996), p. 21.
98. L. Bochet, P. Delobelle, P. Robinet, et al., Int. J. Plast. 17 1491 (2001).
99. F.R.N. Nabarro, Mater. Sci. Eng. A 80 759 (2001).
100. D. Kuhlmann-Wilsdorf and H. Nine, J. Appl. Phys. 38 1683 (1967).
101. D. Holt, J. Appl. Phys. 41 3197 (1970).
102. D. Walgraef and E.G. Aifantis, J. Appl. Phys. 58 688 (1985).
103. N. Hansen and D. Kuhlmann-Wilsdorf, Mater. Sci. Eng. A 81 141 (1986).
104. P. Hähner, Acta Mater. 44 2345 (1996).
105. I. Groma and P. Balogh, Acta Mater. 47 3647 (1999).
106. F.R.N. Nabarro, Phil Mag. A 317 12 (2000).
107. P. Hähner, Scripta Mater. 47 415 (2002).
108. R. Thomson, M. Koslowski and R. LeSar, Phys. Lett. A 332 207 (2004).
109. A.H.W. Ngan, Scripta Metall. 52 1005 (2005).
110. U. Essmann and H. Mughrabi, Phil. Mag. A 40 731 (1979).
111. P.B. Hirsch, in Internal Stresses and Fatigue in Metals, edited by G.M. Rassweiller and W.L. Grube (Elsevier, Amsterdam, 1959), p. 139.
112. G. Saada, Acta Metall. 8 841 (1960).
113. S. Catalao, X. Feaugas, P. Pilvin, et al., Mater. Sci. Eng. A 400/401 349 (2005).
114. M. Risbet and X. Feaugas, EM MC9 (France, 2006).
115. M. Risbet, X. Feaugas, C. Guillemer-Neel, et al., in 9th Int. Fatigue Congress (Atlanta, GA, USA), 2006.
116. P. Hähner, Mater. Sci. Eng. A 271 443 (1999).
117. M. Zaiser, Mater. Sci. Eng. A 249 145 (1998).
118. M. Zaiser, Mater. Sci. Eng. A 309 304 (2001).
119. D. Knoesen and S. Kritzinger, Acta Metall. 30 12119 (1982).
120. A.S. Argon and W.C. Moffat, Acta Metall. 29 293 (1981).
121. F. Prinz, A.S. Argon and W.C. Moffatt, Acta Metall. 30 830 (1982).
122. B. Bako, I. Groma, G. Györgyi, et al., Comp. Mater. Sci. (2006), in press.
123. B.P. Kashyap, K. McTaggart and K. Tangri, Phil. Mag. A 57 97 (1988).
124. S. Quilici and G. Cailletaud, Comp. Mater. Sci. 16 383 (1999).
125. C. Wei, S. Lin, R.G. Qian, et al., Acta Metall. 39 2051 (1991).
126. F. Havlicek, M. Tokuda, S. Hino, et al., Int. J. of Plast. 8 477 (1992).
127. A.J. Beaudoin, A. Acharya, S.R. Chen, et al., Acta Mater. 48 340 (2000).
128. H. Mughrabi, Acta Metall. Mater. 31 1367 (1983).
129. N. Hansen and B. Ralph, Acta Metall. 30 411 (1982).
130. J.J. Gracio, V. Fernandes and J.H. Schmitt, Mater. Sci. Eng. A 118 97 (1989).
131. A.W. Thomson, M. Baskes and F. Flanagan, Acta Metall. 21 1017 (1973).
132. H. Mughrabi, Phil. Mag. 86 1 (2006).