Pilot evaluation of four experimental conditioning treatments to improve the bond strength between resin cement and Y-TZP ceramic

Journal of Prosthodontics

Volumn 20, Issue 2, 2011, Pages 97-100

  Monaco, Carlo ^a   Cardelli, Paolo ^a   Scotti, Roberto ^a   Valandro, Luiz Felipe ^b  

^a UNIVERSITY OF BOLOGNA   (Italy)

^b FEDERAL UNIVERSITY OF SANTA MARIA   (Brazil)

Author keywords

Surface conditioning; Tribochemical silica coating; Y TZP ceramic

Indexed keywords

RESIN CEMENT; SILICON DIOXIDE; YTTRIA STABILIZED TETRAGONAL ZIRCONIA; YTTRIUM; ZIRCONIUM;

ARTICLE; DENTAL BONDING; DENTAL PROCEDURE; DENTAL SURGERY; EVALUATION; HEAT; PILOT STUDY; SHEAR STRENGTH; SURFACE PROPERTY; TOOTH PROSTHESIS;

AIR ABRASION, DENTAL; DENTAL BONDING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; HOT TEMPERATURE; PILOT PROJECTS; RESIN CEMENTS; SHEAR STRENGTH; SILICON DIOXIDE; SURFACE PROPERTIES; YTTRIUM; ZIRCONIUM;

EID: 79951560201     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2010.00677.x     Document Type: Article

References (39)

1. Tinschert J, Schulze KA, Natt G, et al: Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. Int J Prosthodont 2008;21:217-222
2. Guazzato M, Albakry M, Ringer SP, et al: Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 2004;20:449-456
3. Özcan M, Alkumru H, Gemalmaz D: The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont 2001;14:335-339
4. Della Bona A, Anusavice KJ: Microstructure, composition, and etching topography of dental ceramics. Int J Prosthodont 2002;15:159-167
5. Valandro LF, Leite FPP, Scotti R, et al: Effect of ceramic surface treatment on the microtensile bond strength between a resin cement and an alumina-based ceramic. J Adhes Dent 2004;6:327-332
6. Bottino MC, Ozcan M, Coelho PG, et al: Micro-morphological changes prior to adhesive bonding: high-alumina and glassy-matrix ceramics. Braz Oral Res 2008;22:158-163
7. Phoenix S, Shen C: Characterization of treated porcelain surfaces via dynamic contact angle analysis. Int J Prosthodont 1995;8:187-194
8. Della Bona A, Shen C, Anusavice KJ: Work of adhesion of resin on treated lithia disilicate-based ceramic. Dent Mater 2004;20:338-344
9. Brentel A, Özcan M, Valandro LF, et al: Microtensile bond strength of a resin cement to feldspathic ceramic after different etching and silanization regimens in dry and aged conditions. Dent Mater 2007;23:1323-1331
10. Blixt M, Adamczak E, Lindén L, et al: Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shear bond strength of luting cements. Int J Prosthodont 2000;13:221-226
11. Luthy H, Loeffel O, Hammerle CHF: Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 2006;22:195-200
12. Amaral R, Valandro LF, Balducci I, et al: Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions. J Biomed Mater Res B Applied Biomaterials 2008;85:1-9
13. Blatz MB, Chiche G, Holst S, et al: Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia. Quintessence Int 2007;38:745-753
14. Blatz MB, Sadan A, Martin J, et al: In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 2004;91:356-362
15. Özcan M, Nijhuis H, Valandro LF: Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging. Dent Mater J 2008;27:99-104
16. Özcan M, Kerkdijk S, Valandro LF: Comparison of resin cement bond to Y-TZP ceramic following manufacturers' instructions of the cements only. Clin Oral Investig 2008;12:279-282
17. Matinlinna JP, Lassila LVJ, Özcan M, et al: An introduction to silanes and their clinical applications in dentistry. Int J Prosthodont 2004;17:155-164
18. Sun R, Suansuwan N, Kilpaltrick N, et al: Characterisation of tribochemical assisted bonding of composite resin to porcelain and metal. J Dent 2000;28:441-445
19. Wolfart S, Kern M: A new design for all-ceramic inlay-retained fixed partial dentures: a report of 2 cases. Quintessence Int 2006;37:27-33
20. Conrad HJ, Seong WJ, Pesun IJ: Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent 2007;98:389-404
21. Aboushelib MN, Kleverlaan CJ, Feilzer AJ: Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials. J Prosthet Dent 2007;98:379-388
22. Yang B, Barloi A, Kern M: Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 2010;26:44-50
23. Kitayama S, Nikaido T, Maruoka R, et al: Effect of an internal coating technique on tensile bond strengths of resin cements to zirconia ceramics. Dent Mater J 2009;28:446-453
24. Zhang Y, Lawn BR, Malament KA, et al: Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont 2006;19:442-448
25. Zhang Y, Lawn BR, Rekow ED, et al: Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B Appl Biomater 2004;71:381-386
26. Behr M, Rosentritt M, Regnet T, et al: Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems. Dent Mater 2004;20:191-197
27. Hikita K, Van Meerbeek B, De Munck J, et al: Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater 2007;23:71-80
28. Piwowarczyk A, Bender R, Ottl P, et al: Long-term bond between dual-polymerizing cementing agents and human hard dental tissue. Dent Mater 2007;23:211-217
29. Van Noort R, Cardew G, Howard IC, et al: The effect of local interfacial geometry on the measurement of the tensile bond strength to dentin. J Dent Res 1991;70:889-893
30. Van Noort R, Noroozi S, Howard IC, et al: A critique of bond strength measurements. J Dent 1989;12:61-67
31. DeHoff PH, Anusavice KJ, Wang Z: Three-dimensional finite element analysis of the shear bond test. Dent Mater 1995;11:126-131
32. Della Bona A, Van Noort R: Shear vs. tensile bond strength of resin composite bonded to ceramic. J Dent Res 1995;74:1591-1596
33. Versluis A, Tantbirojn D, Douglas WH: Why do shear bond tests pull out dentin?. J Dent Res 1997;76:1298-1307
34. Sudsangiam S, Van Noort R: Do dentin bond strength tests serve a useful purpose?. J Adhes Dent 1999;1:57-67
35. Phrukkanon S, Burrow MF, Tyas MJ: Effect of cross-sectional surface area on bond strengths between resin and dentin. Dent Mater 1998;14:120-128
36. Phrukkanon S, Burrow MF, Tyas MJ: The influence of cross-sectional shape and surface area on the microtensile bond test. Dent Mater 1998;14:212-221
37. Betamar N, Cardew G, Van Noort R: Influence of specimen designs on the microtensile bond strength to dentin. J Adhes Dent 2007;9:159-168
38. Shono Y, Terashita M, Pashley EL, et al: Effects of cross-sectional area on resin-enamel tensile bond strength. Dent Mater 1997;13:290-296
39. Valandro LF, Ozcan M, Amaral R, et al: Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test. Dent Mater J 2008;27:849-855