A critical review of experimental results and constitutive descriptions for metals and alloys in hot working

Materials and Design

Volumn 32, Issue 4, 2011, Pages 1733-1759

  Lin, Y C ^a   Chen, Xiao Min ^a  

^a CENTRAL SOUTH UNIVERSITY   (China)

Author keywords

Forming; Metal matrix; Plastic behavior

Indexed keywords

ARTIFICIAL NEURAL NETWORK MODELS; CRITICAL REVIEW; FLOW BEHAVIORS; FORMING PROCESS; FORMING TEMPERATURE; FURTHER DEVELOPMENT; HOT DEFORMATION BEHAVIORS; METAL MATRIX; METAL-FORMING PROCESS; METALS AND ALLOYS; PLASTIC BEHAVIOR; PREDICTION CAPABILITY; PROCESSING PARAMETERS; RESEARCH GROUPS; TEMPERATURE HISTORY; THERMO-MECHANICAL; TORSION TESTS;

ALLOYS; CONSTITUTIVE EQUATIONS; INDUSTRIAL RESEARCH; METAL FORMING; METALLURGY; METALS; MODELS; NEURAL NETWORKS; STRAIN RATE; TORSION TESTING;

HOT WORKING;

EID: 79251648020     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.11.048     Document Type: Review

References (111)

1. Lin Y.C., Chen M.S., Zhang J. Constitutive modeling for elevated temperature flow behavior of 42CrMo steel. Comput Mater Sci 2008, 424:470-477.
2. Lin Y.C., Chen M.S., Zhong J. Study of metadynamic recrystallization behaviors in a low alloy steel. J Mater Process Technol 2009, 209:2477-2482.
3. Lin Y.C., Chen M.S., Zhong J. Effects of deformation temperatures on stress/strain distribution and microstructure evolution of deformed 42CrMo steel. Mater Des 2009, 30:908-913.
4. Lin Y.C., Chen M.S. Study of microstructural evolution during static recrystallization in a low alloy steel. J Mater Sci 2009, 44:835-842.
5. Lin Y.C., Chen M.S., Zhong J. Study of static recrystallization kinetics in a low alloy steel. Comput Mater Sci 2008, 44:316-321.
6. Lin Y.C., Chen M.S., Zhang J. Prediction of 42CrMo steel flow stress at high temperature and strain rate. Mech Res Commun 2008, 35:142-150.
7. Liang R.Q., Khan A.S. A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures. Int J Plast 1999, 15:963-980.
8. Rusinek A., Rodríguez-Martínez J.A., Arias A. A thermo-viscoplastic constitutive model for FCC metals with application to OFHC Copper. Int J Mech Sci 2010, 52:120-135.
9. Shin H., Kim J.B. A phenomenological constitutive equation to describe various flow stress behaviors of materials in wide strain rate and temperature regimes. J Eng Mater 2010, 132:021009. (6 pages).
10. Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th International Symposium on Ballistics. Den Haag, The Netherlands; 1983. p. 541-3.
11. Khan A.S., Huang S. Experimental and theoretical study of mechanical behavior of 1100 aluminum in the strain rate range 10-5-104s-1. Int J Plast 1992, 8:397-424.
12. Khan A.S., Zhang H.Y., Takacs L. Mechanical response and modeling of fully compacted nanocrystalline iron and copper. Int J Plast 2000, 16:1459-1476.
13. Khan A.S., Suh Y.S., Kazmi R. Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys. Int J Plast 2004, 20:2233-2248.
14. Khan A.S., Suh Y.S., Chen X., Takacs L., Zhang H.Y. Nanocrystalline aluminum and iron: mechanical behavior at quasi-static and high strain rates, and constitutive modeling. Int J Plast 2006, 22:195-209.
15. Farrokh B., Khan A.S. Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: synthesis, experiment, and constitutive modeling. Int J Plast 2009, 25:715-732.
16. Fields D.S., Bachofen W.A. Determination of strain hardening characteristics by torsion testing. ASTM, Proc Am Soc Test Mater 1957, 57:1259-1272.
17. Molinari A., Ravichandran G. Constitutive modeling of high-strain-rate deformation in metals based on the evolution of an effective microstructural length. Mech Mater 2005, 37:737-752.
18. Voce E. The relationship between stress and strain for homogeneous deformation. J Inst Met 1948, 74:537-562.
19. Kocks U.F. Laws for work-hardening and low-temperature creep. J Eng Mater Technol 1976, 98:76-85.
20. Zener C., Hollomon H. Effect of strain rate upon plastic flow of steel. J Appl Phys 1944, 15:22-32.
21. Sellars C.M. On the mechanism of hot deformation. Acta Met 1966, 14:1136-1138.
22. Jonas J., Sellars C.M. Tegart WJMcG. Strength and structure under hot-working conditions. Int Metal Rev 1969, 14:1-24.
23. Shi H., McLaren A.J., Sellars C.M., Shahani R., Bolingbroke R. Constitutive equations for high temperature flow stress of aluminium alloys. Mater Sci Technol 1997, 13:210-216.
24. Lin Y.C., Liu G. A new mathematical model for predicting flow stress of typical high-strength alloy steel at elevated high temperature. Comput Mater Sci 2010, 48:54-58.
25. Zhang H.J., Wen W.D., Cui H.T. Behaviors of IC10 alloy over a wide range of strain rates and temperatures: experiments and modeling steel. Mater Sci Eng A 2009, 504:99-103.
26. Vural M., Caro J. Experimental analysis and constitutive modeling for the newly developed 2139-T8 alloy. Mater Sci Eng A 2009, 520:56-65.
27. Lin Y.C., Chen X.M. A combined Johnson-Cook and Zerilli-Armstrong model for hot compressed typical high-strength alloy steel. Comput Mater Sci 2010, 49:628-633.
28. Zerilli P.J., Armstrong R.W. Dislocation-mechanics-based constitutive relations for material dynamics calculations. J Appl Phys 1987, 61:1816-1825.
29. Nadai A., Manjoine M.J. High-speed tension tests at elevated temperatures - parts II and III. J Appl Mech 1941, 8:A77-A91.
30. Lin Y.C., Chen X.M., Liu G. A modified Johnson-Cook model for tensile behavior of typical high-strength alloy steel. Mater Sci Eng A 2010, 527:6980-6986.
31. Hou Q.Y., Wang J.T. A modified Johnson-Cook constitutive model for Mg-Gd-Y alloy extended to a wide range of temperatures. Comput Mater Sci 2010, 50:147-152.
32. Meyers M.A., Chen Y.J., Marouis F.D.S., Kim D.S. High-strain, high-strain-rate behavior of tantalum. Metall Mater Trans A 1995, 26:2493-2501.
33. Wang Y., Zhou Y.X., Xia Y.M. A constitutive description of tensile behavior fro brass over a wide range of strain rates. Mater Sci Eng A 2004, 372:186-190.
34. Khan A.S., Liang R.Q. Behaviors of three BCC metal over a wide range of strain rates and temperatures: experiments and modeling. Int J Plast 1999, 15:1089-1109.
35. Khan A.S., Liang R.Q. Behaviors of three BCC metals during non-proportional multi-axial loadings: experiments and modeling. Int J Plast 2000, 16:1443-1458.
36. Yu H.D., Guo Y.J., Zhang K.Z., Lai X.X. Constitutive model on the description of plastic behavior of DP600 steel at strain rate from 10-4 to 103s-1. Comput Mater Sci 2009, 46:36-41.
37. Cheng Y.Q., Zhang H., Chen Z.H., Xian K.F. Flow stress equation of AZ31 magnesium alloy sheet during warm tensile deformation. J Mater Process Technol 2008, 208:29-34.
38. Zhang XH. Experimental and numerical study of magnesium alloy during hot-working process. PhD thesis, Shanghai Jiaotong University; 2003.
39. Quan G.Z., Liu K.W., Zhou J., Chen B. Dynamic softening behaviors of 7075 aluminum alloy. Trans Nonferrous Met Soc China 2009, 19:537-541.
40. Durrenberger L., Molinari A., Rusinek A. Internal variable modeling of the high strain-rate behavior of metals with applications to multiphase steels. Mater Sci Eng A 2008, 478:297-304.
41. Durrenberger L., Molinari A. Modeling of temperature and strain-rate effects in metals using an internal variable model. Exp Mech 2009, 49:247-255.
42. Hassen P. Plastic deformation of nickel single crystals at low temperatures. Philos Mag 1958, 3:384-418.
43. Schoeck G., Seeger A. Defects in crystalline solids 1995, Physical Society, London.
44. Naderi M., Durrenberger L., Molinari A., Bleck W. Constitutive relationships for 22MnB5 boron steel deformed isothermally at high temperatures. Mater Sci Eng A 2008, 478:130-139.
45. Lin Y.C., Chen M.S., Zhong J. Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel. J Mater Process Technol 2008, 205:308-315.
46. Guan S.K., Wu L.H., Wang L.G. Flow stress and microstructure evolution of semi-continuous casting AZ70 Mg-alloy during hot compression deformation. Trans Nonferrous Met Soc China 2008, 18:315-320.
47. Mandal S., Rakesh V., Sivaprasad P.V., Venugopal S., Kasiviswanathan K.V. Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel. Mater Sci Eng A 2009, 500:114-121.
48. He X.M., Yu Z.Q., Liu G.M., Wang W.G., Lai X.M. Mathematical modeling for high temperature flow behavior of as-cast Ti-45Al-8.5Nb-(W,B,Y) alloy. Mater Des 2009, 30:166-169.
49. Zhang P., Li F.G., Wan Q. Constitutive equation and processing map for hot deformation of sic particles reinforced metal matrix composites. J Mater Eng Perform 2010, 19:1290-1297.
50. Liu X.Y., Pan Q.L., He Y.B., Li W.B., Liang W.J., Yin Z.M. Flow behavior and microstructural evolution of Al-Cu-Mg-Ag alloy during hot compression deformation. Mater Sci Eng A 2009, 500:150-154.
51. Samantaray D., Mandal S., Bhaduri A.K. Constitutive analysis to predict high-temperature flow stress in modified 9Cr-1Mo (P91) steel. Mater Des 2010, 31:981-984.
52. Qin Y.J., Pan Q.L., He Y.B., Li W.B., Liu X.Y., Fan X. Modeling of flow stress for magnesium alloy during hot deformation. Mater Sci Eng A 2010, 527:2790-2797.
53. Momeni A., Dehghani K. Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps. Mater Sci Eng A 2010, 527:5467-5473.
54. Lin Y.C., Xia Y.C., Chen X.M., Chen M.S. Constitutive descriptions for hot compressed 2124-T851 aluminum alloy over a wide range of temperature and strain rate. Comput Mater Sci 2010, 50(1):227-233.
55. Perzyna P. The constitutive equations for rate sensitive plastic materials. Quart Appl Math 1963, 20:321-332.
56. Bergström Y. Dislocation model for the stress-strain behaviour of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations. Mater Sci Eng 1969, 5:193-200.
57. Bergström Y. The plastic deformation of metals - a dislocation model and its applicability. Rev Powder Metal Phys Ceram 1983, 2:105-115.
58. Nes E. Modelling of work hardening and stress saturation in FCC metals. Prog Mater Sci Forum 1998, 41:129-193.
59. Toros S., Ozturk F. Modeling uniaxial, temperature and strain rate dependent behavior of Al-Mg alloys. Comput Mater Sci 2010, 49:333-339.
60. Vural M., Rittel D., Ravichandran G. Large strain mechanical behavior of 1018 cold-rolled steel over a wide range of strain rates. Metallur Mater Trans A 2003, 34A:2873-2885.
61. Preston D.L., Tonks D.L., Wallace D.C. Model of plastic deformation for extreme loading conditions. J Appl Phys 2003, 93:211-220.
62. Rusinek A., Klepaczko J.R. Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress. Int J Plast 2001, 17:87-115.
63. Voyiadjis G.Z., Almasri A.H. A physically based constitutive model for fcc metals with applications to dynamic hardness. Mech Mater 2008, 40:549-563.
64. Bodner S.R., Partom Y. Constitutive equations for elastic-viscoplastic strain-hardening materials. J Appl Mech 1975, 42:385-389.
65. Goetz R.L., Seetharaman V. Modeling dynamic recrystallization using cellular automaton. Scripta Mater 1998, 38:405-413.
66. Cai M.C., Niu L.S., Ma X.F., Shi H.J. A constitutive description of the strain rate and temperature effects on the mechanical behavior of materials. Mech Mater 2010, 42:774-781.
67. Mecking H., Kocks U.F. Kinetics of flow and strain-hardening. Acta Metall 1981, 29:1865-1875.
68. Tsuchida N., Tomota Y., Moriya H., Umezawa O., Nagai K. Application of the Kocks-Mecking model to tensile deformation of an austenitic 25Cr-19Ni steel. Acta Mater 2001, 49:3029-3038.
69. Nemat-Nasser S. Flow stress of FCC polycrystals with application to OFHC Cu. Acta Mater 1998, 46:565-577.
70. Park J.H., Tomota Y., Takagi S., Ishikawa S., Shimizu T. Estimation of flow stress by the Kocks-Mecking model at strain rate of 103/s for an ultra low carbon steel. Tetsu to Hagane 2001, 87:657-664.
71. Zhang H.J., Wen W.D., Cui H.T., Xu Y. A modified Zerilli-Armstrong model for alloy IC10 over a wide range of temperatures and strain rates. Mater Sci Eng A 2009, 526:1-6.
72. Samantaray D., Mandal S., Borah U., Bhaduri A.K., Sivaprasad P.V. A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel. Mater Sci Eng A 2009, 526:1-6.
73. Gao C.Y., Zhang L.C. A constitutive model for dynamic plasticity of FCC metals. Mater Sci Eng A 2010, 527:3138-3143.
74. Abed F.H., Voyiadjis G.Z. A consistent modified Zerilli-Armstrong flow stress model for BCC and FCC metals for elevated temperatures. Acta Mech 2005, 175:1-18.
75. Noble J.P., Harding J. An evaluation of constitutive relations for high-rate material behaviour using the tensile Hopkinson-bar. J De Phys Iv 1994, 4:477-482.
76. Lee W.S., Liu C.Y. The effects of temperature and strain rate on the dynamic flow behaviour of different steels. Mater Sci Eng A 2006, 426:101-113.
77. Özel T., Karpat Y. Identification of constitutive material model parameters for high-strain rate metal cutting conditions using evolutionary computational algorithms. Mater Manuf Process 2007, 22:659-667.
78. Bergstrom Y. A dislocation model for the stress-strain behaviour of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations. Mater Sci Eng 1970, 5:166-193.
79. Laasraoui A., Jonas J.J. Prediction of steel flow stresses at high temperatures and strain rates. Metall Mater Trans A 1991, 22:1545-1558.
80. Honeycombe R.W.K. Steels microstructure and properties 1981, Edward Arnold, London.
81. Liu J., Cui Z.S., Li C.X. Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31B. Comput Mater Sci 2008, 41:375-382.
82. Mirzadeh H., Najafizadeh A. Flow stress prediction at hot working conditions. Mater Sci Eng A 2010, 527:1160-1164.
83. Kim J.B., Shin H. Comparison of plasticity models for tantalum and a modification of the PTW model for wide ranges of strain, strain rate, and temperature. Int J Impact Eng 2009, 36:746-753.
84. Seeger A. The mechanism of glide and work-hardening in face-centered cubic and hexagonal close-packed metal. Dislocations and mechanical properties of crystals 1957, J. Wiley, New York.
85. Klepaczko J.R. Thermally activated flow and strain rate history effects for some polycrystalline FCC metals. Mater Sci Eng 1975, 18:121-135.
86. Klepaczko J.R. A general approach to rate sensitivity and constitutive modeling of FCC and BCC metals. Impact: effects of fast transient loadings 1998, 3-35. Rotterdam.
87. Klepaczko J.R. A practical stress-strain-strain rate-temperature constitutive relation of the power form. J Mech Work Technol 1987, 15:143-165.
88. Rusinek A., Rodríguez-Martínez J.A. Thermo-viscoplastic constitutive relation for aluminium alloys, modeling of negative strain rate sensitivity and viscous drag effects. Mater Des 2009, 30:4377-4390.
89. Kapoor R., Nemat-Nasser S. Comparison between high strain-rate and low strain-rate deformation of tantalum. Metall Mater Trans 2000, 31A:815-823.
90. Chen S.Y., Huang C.G., Wang C.K., Duan Z.P. Mechanical properties and constitutive relationships of 30CrMnSiA steel heated at high rate. Mater Sci Eng A 2008, 483-484:105-108.
91. Anand L. constitutive equations for hot-working of metal. Int J Plast 1985, 1:213-231.
92. Jin Z.Y., Liu J., Cui Z.S., Wei D.L. Identification of nucleation parameter for cellular automaton model of dynamic recrystallization. Trans Nonferrous Met Soc China 2010, 20:458-464.
93. Jin Z.Y., Cui Z.S. Investigation on strain dependence of dynamic recrystallization behavior using an inverse analysis method. Mater Sci Eng A 2010, 527:3111-3119.
94. Chen F., Cui Z.S., Liu J., Chen W., Chen S.J. Mesoscale simulation of the high-temperature austenitizing and dynamic recrystallization by coupling a cellular automaton with a topology deformation technique. Mater Sci Eng A 2010, 527:5539-5549.
95. Follansbee P.S., Kocks U.F. A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable. Acta Metall 1988, 36:81-93.
96. Lin Y.C., Zhang J., Zhong J. Application of neural networks to predict the elevated temperature flow behavior of a low alloy steel. Comput Mater Sci 2008, 43:752-758.
97. Sheikh H., Serajzadeh S. Estimation of flow stress behavior of AA5083 using artificial neural networks with regard to dynamic strain ageing effect. J Mater Process Technol 2008, 196:115-119.
98. Quan G.Z., Tong Y., Luo G., Zhou J. A characterization for the flow behavior of 42CrMo steel. Comput Mater Sci 2010, 50:167-171.
99. Lin Y.C., Liu Ge, Chen M.S. Prediction of static recrystallization in a multi-pass hot deformed low-alloy steel using artificial neural network. J Mater Process Technol 2009, 209:4611-4616.
100. Mandal S., Sivaprasad P.V., Venugopal S., Murthy K.P.N. Artificial neural network modeling to evaluate and predict the deformation behavior of stainless steel type AISI 304L during hot torsion. Appl Soft Comput 2009, 9:237-244.
101. Sun Y., Zeng W.D., Zhao Y.Q., Qi Y.L., Ma X., Han Y.F. Development of constitutive relationship model of Ti600 alloy using artificial neural network. Comput Mater Sci 2010, 48:686-691.
102. Ji G.L., Li F.G., Li Q.H. Prediction of the hot deformation behavior for Aermet100 steel using an artificial neural network. Comput Mater Sci 2010, 48:626-632.
103. Toros S., Ozturk F. Flow curve prediction of Al-Mg alloys under warm forming conditions at various strain rates by ANN. Appl Soft Comput 2010, 10.1016/j.asoc.2010.06.004.
104. Mandal S., Sivaprasad P.V., Venugopal S., Murthy K.P.N., Raj B. Artificial neural network modeling of composition-process-property correlations in austenitic stainless steels. Mater Sci Eng A 2008, 485:571-580.
105. Mandal S., Sivaprasad P.V., Murthy K.P.N., Raj B. Modeling the hot deformation behavior of a 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel using artificial neural network. Met Mater Process 2006, 18:159-170.
106. Mandal S., Sivaprasad P.V., Venugopal S., Murthy K.P.N. Constitutive flow behavior of austenitic stainless steels under hot deformation: artificial neural network modeling to understand, evaluate and predict. Model Simul Mater Sci Eng 2006, 14:1053-1070.
107. Fu Z.M., Mo J.H., Chen L., Chen W. Using genetic algorithm-back propagation neural network prediction and finite-element model simulation to optimize the process of multiple-step incremental air-bending forming of sheet metal. Mater Des 2009, 31:267-277.
108. Dobrzański L.A., Honysz R. Application of artificial neural networks in modelling of normalised structural steels mechanical properties. J Achiv Mater Manuf Eng 2009, 32:37-45.
109. Salehi M.S., Serajzadeh S. A model to predict recrystallization kinetics in hot strip rolling using combined artificial neural network and finite elements. J Mater Eng Perform 2009, 18:1209-1217.
110. He X.M., Yu Z.Q., Lai X.M. Analysis of high temperature deformation behavior of a high Nb containing TiAl based alloy. Mater Lett 2008, 62:4181-4183.
111. Odejobi Odetunji A., Umoru Lasisi E. Applications of soft computing techniques in materials engineering: a review. Afr J Math Comput Sci Res 2009, 2:104-131.