Comparison between high and low Strain-Rate deformation of tantalum

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 31, Issue 13, 2000, Pages 815-823

  Kapoor, Rajeev ^a   Nemat Nasser, Sia ^b  

^a BHABHA ATOMIC RESEARCH CENTRE   (India)

^b UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

A-THERMAL; ATHERMAL COMPONENTS; COMPRESSION TESTS; CONSTITUTIVE BEHAVIORS; FLOW STRESS; HIGH STRAIN RATES; LOW STRAINS; THERMAL COMPONENT; VISCOUS DRAG;

COMPRESSION TESTING; DRAG; PLASTIC FLOW; TANTALUM;

STRAIN RATE;

EID: 0012323345     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-000-1001-6     Document Type: Article

References (31)

1. P.S. Follansbee and U.F. Kocks: Acta Metall., 1988, vol. 36, pp. 81-93.
2. W.H. Gourdin and D. Lassila: Tantalum. Proc. Symp. Held at 125th TMS Annual Meeting and Exhibition, E. Chen, A. Crowson, E. Lavernia, and W. Ebihara, eds., TMS, Warrendale, PA, 1995 pp. 219-23.
3. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76-85.
4. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-75.
5. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57-70.
6. P.S. Follansbee, J.C. Huang, and G.T. Gray: ActaMetall. Mater., 1990, vol. 38, pp. 1241-54.
7. H. Mecking and Y. Estrin: Constitutive Relations and Their Physical Basis: Proc. 8th Riso Int. Symp. on Metallurgy and Materials Science, S.I. Anderson, ed., Technical University Hamburg, Hamburg, 1990 pp. 123-45.
8. G. Simmons and H. Wang: Single Crystal ElasticConstants and Calcu-lated Aggregate Properties: A Handbook, 2nd ed. The MIT Press, Cambridge, MA, 1971.
9. U.F. Kocks, A.S. Argon, and M.F. Ashby: Progr. Mater. Sci., 1975, vol. 19, pp. 1-271.
10. A.K. Zurek, P.S. Follansbee, and D. Kapoor: in High Strain Rate Behavior of Refractory Metals and Alloys, R. Asfahani, E. Chen, and A. Crowson, eds., TMS, Warrendale, PA, 1992 pp. 190-207.
11. S. Nemat-Nasser and J.B. Isaacs: Acta Mater., 1997, vol. 45, pp. 907-19.
12. S. Nemat-Nasser and Y. Li: Acta Mater., 1998, vol. 46, pp. 565-77.
13. A.H. Cottrell and R.J. Stokes: Proc. R. Soc. A, 1955, vol. 233, pp. 17-34.
14. Z.S. Basinski and J.W. Christian: Aus. J. Phys., 1960, vol. 13, pp. 299-308.
15. J. Klepaczko: Mater. Sci. Eng., 1975, vol. 18, pp. 121-35.
16. J.R. Klepaczko and C.Y. Chiem: J. Mech. Phys. Solids, 1986, vol. 34, pp. 29-54.
17. K.G. Hoge and A.K. Mukherjee: J. Mater. Sci., 1977, vol. 12, pp. 1666-72.
18. M.A. Meyers, Y.J. Chen, F.D.S. Marquis, and D.S. Kim: Metall. Mater. Trans A, 1995, vol. 26A, pp. 2493-2502.
19. S.R. Chen, G.T. Gray III, and S.R. Bingert: in Tantalum. Proc. Symp. Held at 125th TMS Annual Meeting and Exhibition, E. Chen, A. Crowson, E. Lavernia, and W. Ebihara, eds., TMS, Warrendale, PA, 1996 pp. 173-84.
20. D.J. Steinberg and C.M. Lund: J. Appl. Phys., 1989, vol. 65, pp. 1528-33.
21. G.T. Gray III and K.S. Vecchio: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2555-64.
22. C.M. Lopatin, C.L. Wittman, J.P. Swensen, and P.F. Perron: in High Strain Rate Behavior of Refractory Metals and Alloys, R. Asfahani, E. Chen, and A. Crowson, eds., TMS, Warrendale, PA, 1992 pp. 241-47.
23. R.M. Davies: Phil. Mag., 1948, vol. 240, p. 375.
24. H. Kolsky: Proc. Phys. Soc, London, 1949, vol. 62, pp. 676-700.
25. P.S. Follansbee: Mechanical Testing, Metals Handbook, 9th ed., ASM, Metals Park, OH, 1985, vol. 8, p. 190.
26. S. Nemat-Nasser, J.B. Isaacs, and J. E. Starrett: Proc. R. Soc. London A, 1991, vol. 435, pp. 371-91.
27. R. Kapoor and S. Nemat-Nasser: Mech. Mater. 1998, vol. 27, pp. 1-12.
28. S. Nemat-Nasser, Y. Li, and J.B. Isaacs: Mech. Mater., 1994, vol. 17, pp. 111-34.
29. E. Nadgornyi: Progr. Mater. Sci., 1988, vol. 31, pp. 19-21 and 232-51.
30. G. Regazzoni, U.F. Kocks, and P.S. Follansbee: Acta Metall., 1987, vol. 35, pp. 2865-75.
31. G.Y. Chin and W.L. Mammel: Trans. TMS-AIME, 1967, vol. 239, pp. 1400-05.