Thermo-viscoplastic constitutive relation for aluminium alloys, modeling of negative strain rate sensitivity and viscous drag effects

Materials and Design

Volumn 30, Issue 10, 2009, Pages 4377-4390

  Rusinek, Alexis ^a   Rodriguez Martinez J A ^b  

^a UNIVERSITÉ DE LORRAINE   (France)

^b UNIVERSIDAD CARLOS III DE MADRID   (Spain)

Author keywords

Constitutive relation; Dynamic strain aging; Strain rate; Thermal activation; Viscous drag

Indexed keywords

ADIABATIC CONDITIONS; ALUMINIUM ALLOYS; ANALYTICAL RESULTS; CONSISTENT ALGORITHM; CONSTITUTIVE RELATION; CONSTITUTIVE RELATIONS; DEFORMATION AND FRACTURE; DYNAMIC STRAIN AGING; EXPERIMENTAL DATA; FINITE DEFORMATIONS; FLOW STRESS; FRACTURE CHARACTERISTICS; HIGH STRAIN RATES; LIGHT-WEIGHT WROUGHT ALLOYS; MODELLING AND SIMULATIONS; SHEAR TESTING; SHEET STEEL; STRAIN RATE SENSITIVITY; TEMPERATURE DEPENDENCE; THERMAL ACTIVATION; THERMO-VISCOPLASTIC; TRIAXIALITY; VISCOUS DRAG;

ALUMINUM; ALUMINUM ALLOYS; CONSTITUTIVE EQUATIONS; DEFORMATION; DRAG; PAPER SHEETING; STEEL SHEET; STEEL TESTING;

STRAIN RATE;

EID: 67649605063     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.04.011     Document Type: Article

References (54)

1. Clausen A.H., Børvik T., Hopperstad O.S., and Benallal A. Flow and fracture characteristics of aluminium alloy AA5083-H116 as function of strain rate, temperature and triaxiality. Mater Sci Eng A 364 (2004) 260-272
2. http://www.onera.fr/dmsc/modelisation-structures-composites.php.
3. http://desourcesure.com/dss/2007/02/oiseaux_de_fer_contre_oiseaux.php.
4. Rusinek A., Rodríguez-Martínez J.A., Zaera R., Klepaczko J.R., Arias A., and Sauvelet C. Experimental and numerical analysis of failure process of mild steel sheets subjected to perpendicular impact by hemispherical projectiles. Int J Impact Eng 36 4 (2009) 565-587
5. Higashi K., Mukai T., Kaizu K., Tsuchida S., and Tanimura S. Strain rate dependence on mechanical properties is some commercial aluminium alloys. J Phys III 1 (1991)
6. Mukai T., Higashi K., and Tanimura S. Influence of the magnesium concentration on the relationship between fracture mechanism and strain rate in high purity Al-Mg alloys. Mater Sci Eng A 76 (1994) 181-189
7. Dorward R.C., and Hasse K.R. Strain rate effects on tensile deformation of 2024-O and 7075-O aluminium alloy sheet. J Mater Eng Perform 4 (1995) 216-220
8. Cottrell A.H. A note on the Portevin-Le Chatelier effect. Phil Mag (seventh series) 44 335 (1953) 829-832
9. Cottrell A.H. Dislocations and plastic flow in crystals (1953), University Press, Oxford
10. Sleeswijk A.W. Slow strain hardening of ingot iron. Acta Metall 6 (1958) 598-603
11. Kubin L.P., and Estrin Y. Portevin-Le Chatelier effect in deformation with constant stress rate. Acta Metall 33 3 (1985) 397-407
12. Picu R.C. A mechanism for the negative strain-rate sensitivity of dilute solid solutions. Acta Mater 52 (2004) 3447-3458
13. Abbadi M., Hahner P., and Zeghloul A. On the characteristics of Portevin-Le Chatelier bands in aluminum alloy 5182 under stress-controlled and strain-controlled tensile testing. Mater Sci Eng A 337 (2002) 194-201
14. Klose F.B., Ziegenbein A., Hagemann F., Neuhäuser H., Hähner P., Abbadi M., et al. Analysis of Portevin-Le Chatelier serrations of type Bin Al-Mg. Mater Sci Eng A 369 (2004) 76-81
15. Zhang H., Ramesha K.T., and Chin E.S.C. High strain rate response of aluminum 6092/B4C composites. Mater Sci Eng A 384 (2004) 26-34
16. Brechet Y., and Estrin Y. On the influence of precipitation on the Portevin-Le Chatelier effect. Acta Metall Mater 43 3 (1995) 955-963
17. Hähner P. On the critical conditions of the Portevin-Le Châtelier effect. Acta Mater 45 9 (1997) 3695-3707
18. Zhang S., McCormick P.G., and Estrin Y. The morphology of Portevin-Le chatelier bands: Finite element simulation for Al-Mg-Si. Acta Mater 49 (2001) 1087-1094
19. McCormick P.G. The Portevin-Le Châtelier effect in an Al-Mg-Si alloy. Acta Metall 19 (1971) 463-471
20. Follansbee PS. High-strain-rate deformation of FCC metals and alloys. Metallurgical applications of shock-wave and high-strain-rate phenomena; 1986. p. 451-79.
21. Zerilli F.J., and Armstrong R.W. The effect of dislocation drag on the stress-strain behavior of fcc metals. Acta Metall Mater 40 (1992) 1803-1808
22. Kapoor R., and Nemat-Nasser S. Comparison between high strain-rate and low strain-rate deformation of tantalum. Metall Mater Trans 31A (1999) 815-823
23. Nemat-Nasser S., and Guo W.G. Thermomechanical response of DH-36 structural steel over a wide range of strain rates and temperatures. Mech Mater 35 (2003) 1023-1047
24. Kumar A., Hauser F.E., and Dorn J.E. Viscous drag on dislocations in aluminum at high strain rates. Acta Metall 9 16 (1968) 1189-1197
25. Campbell J.D., and Ferguson W.G. The temperature and strain-rate dependence of the shear strength of mild steel. Phil Mag 81 (1970) 63-82
26. Regazzoni G., Kocks U.F., and Follansbee P.S. Dislocation kinetics at high strain rates. Acta Metall 12 35 (1987) 2865-2875
27. Perzyna P. Application of the thermodynamical theory of elasto-viscoplasticity in modern manufacturing processes. Course notes: Damage mechanics and micromechanics of localized fracture phenomena in inelastic solids. CISM. Udine, July 7-11, 2008.
28. Zerilli F.J., and Armstrong R.W. Dislocation-mechanics-based constitutive relations for material dynamics calculations. J Appl Phys 61 (1987) 1816-1825
29. Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of seventh international symposium on ballistics; 1983. p. 541-7.
30. Karagiozova D., and Jones N. Dynamic buckling of elastic-plastic square tubes under axial impact II: structural response. Int J Impact Eng 30 (2004) 167-192
31. Børvik T., Forrestal M.J., Hopperstad O.S., Warren T.L., and Langseth M. Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles - calculations. Int J Impact Eng 36 3 (2009) 426-437
32. Varas D., Zaera R., and Lopez-Puente J. Numerical modelling of the hydrodynamic ram phenomenon. Int J Impact Eng 36 (2009) 363-374
33. Rusinek A., and Klepaczko J.R. Shear testing of sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress. Int J Plasticity 17 (2001) 87-115
34. El-Magd E.M., and Abouridouane M. Characterization, modelling and simulation of deformation and fracture behaviour of the light-weight wrought alloys under high strain rate loading. Int J Impact Eng 32 (2006) 741-758
35. Zaera R., and Fernández-Sáez J. An implicit consistent algorithm for the integration of thermoviscoplastic constitutive equations in adiabatic conditions and finite deformations. Int J Solids Struct 43 (2006) 1594-1612
36. Seeger A. The mechanism of glide and work-hardening in face-centered cubic and hexagonal close-packed metal. Dislocations and mechanical properties of crystals (1957), J. Wiley, New York
37. Klepaczko J.R. Thermally activated flow and strain rate history effects for some polycrystalline FCC metals. Mater Sci Eng 18 (1975) 121-135
38. Klepaczko JR. A general approach to rate sensitivity and constitutive modeling of FCC and BCC metals. In: Impact: effects of fast transient loadings, Rotterdam; 1998. p. 3-35.
39. Rusinek A., Rodríguez-Martínez J.A., Klepaczko J.R., and Pecherski R.B. Analysis of thermo-visco-plastic behaviour of six high strength steels. J Mater Design 30 (2009) 1748-1761
40. Klepaczko J.R. A practical stress-strain-strain rate-temperature constitutive relation of the power form. J Mech Work Technol 15 (1987) 143-165
41. Nemat-Nasser S., Ni L., and Okinaka T. A constitutive model for fcc crystals with application to polycrystalline OFHC copper. Mech Mater 30 (1998) 325-341
42. Oussouaddi O., and Klepaczko J.R. An analysis of transition from isothermal to adiabatic deformation in the case of a tube under torsion. Proceedings of the conference on DYMAT 91. J Phys IV Coll. C3 Suppl. III (1991) C3-C323 [in French]
43. Berbenni S., Favier V., Lemoine X., and Berveiller N. Micromechanical modelling of the elastic-viscoplastic behaviour of polycrystalline steels having different microstructures. Mater Sci Eng 372 (2004) 128-136
44. Rusinek A., Zaera R., and Klepaczko J.R. Constitutive relations in 3-D for a wide range of strain rates and temperatures - application to mild steels. Int J Solids Struct 44 (2007) 5611-5634
45. Klepaczko J.R., Rusinek A., Rodríguez-Martínez J.A., Pecherski R.B., and Arias A. Modeling of thermo-viscoplastic behaviour of DH-36 and Weldox 460-E structural steels at wide ranges of strain rates and temperatures, comparison of constitutive relations for impact problems. Mech Mater 41 (2009) 599-621
46. http://www.suppliersonline.com/propertypages/5086.asp.
47. Benallal A., Berstad T., Børvik T., Hopperstad O.S., Koutiri I., and Nogueira de Codes R. An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the Portevin-Le Chatelier effect. Int J Plasticity 24 (2008) 1916-1945
48. Rusinek A., Zaera R., Klepaczko J.R., and Cheriguene R. Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel. Acta Mater 53 (2005) 5387-5400
49. Follansbee P.S., and Weertman J. On the question of Iow stress at high strain rates controlled by dislocation viscous. Iow Mech Mater 1 (1982) 345-350
50. Chiem C.Y. Material deformation at high strain rates. In: Meyers M., Murr L., and Staudhammer K. (Eds). Shock-wave and high-strain-rate phenomena in materials (1992), Marcel Dekker, New York 69-85
51. Nemat-Nasser S., Guo W.G., and Kihl D.P. Thermomechanical response of AL-6XN stainless steel over a wide range of strain rates and temperatures. J Mech Phys Solids 49 (2001) 1823-1846
52. Guo W.G., and Nemat-Nasser S. Flow stress of Nitronic-50 stainless steel over a wide range of strain rates and temperatures. Mech Mater 38 (2006) 1090-1103
53. http://www.alcoa.com/mill_products/catalog/pdf/alloy7075techsheet.pdf.
54. El-Magd E. Mechanical properties at high strain rates. J Phys IV C8 4 (1994) 149-170