MG-IVT: An infinitely variable transmission with optimal power flows

Journal of Mechanical Design

Volumn 130, Issue 11, 2008, Pages 1126031-11260310

  Bottiglione, Francesco ^a   Mantriota, Giacomo ^a  

^a POLITECNICO DI BARI   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTRIC LOAD FLOW; ELECTRIC POWER TRANSMISSION; EPICYCLIC GEARS;

CONSTANT TRANSMISSION RATIOS; CONTINUOUSLY VARIABLE TRANSMISSION; INFINITELY VARIABLE TRANSMISSIONS; MOTION INVERSION; OPTIMAL EFFICIENCY; OPTIMAL POWER FLOWS; PLANETARY GEAR TRAIN; TRANSMISSION SYSTEMS; TRANSMISSION-RATIO; ZERO VALUES;

EFFICIENCY;

EID: 77955225625     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2976802     Document Type: Article

References (28)

1. Machida, H., 1999, "Traction Drive CVT Up to Date", Proceedings of the International Congress on Continuously Variable Transmission CVT'99, Eindhoven, The Netherlands, September 16-17, 1999, pp. 71-76.
2. Blouin, V. Y., Fadel, G. M., Haque, I. U., Wagner, J. R., and Samuels, H. B., 2004, "Continuously Variable Transmission Design for Optimum Vehicle Performance by Analytical Target Cascading", Int. J. Heavy Veh. Syst., 11 (3-4), pp. 327-348.
3. Zhang, Y., Lin, H., Zhang, B., and Mi, C., 2006, "Performance Modeling and Optimization of a Novel Multi-Mode Hybrid Powertrain", ASME J. Mech. Des., 128, pp. 79-89.
4. Tanaka, H., 2002, "Speed Ratio Control of a Parallel Layout Double Cavity Half-Toroidal CVT for Four-Wheel Drive", JSAE Rev., 23(2), pp. 213-217.
5. Akehurst, S., Parker, D. A., and Schaaf, S., 2006, "CVT Rolling Traction Drives: A Review of Research Into Their Design, Functionality, and Modeling", ASME J. Mech. Des., 128, pp. 1165-1176.
6. Kim S., Moore C., Peshkin M., and Colgate J. E., 2008, "Causes of Microslip in a Continuously Variable Transmission", ASME J. Mech. Des., 130(1), pp. 011010.
7. Tellermann, U., 2007, "Full Toroidal CVT in a Mechanical Hybrid Configuration", Proceedings of the International CTI-Symposium Innovative Automotive Transmissions, Berlin, Germany, 3-7 Dec. 2007.
8. Akehurst, S., Parker, D. A., and Schaaf, S., 2007, "Dynamic Modeling of the Milner Continuously Variable Transmission: The Basic Kinematics", ASME J. Mech. Des., 129, pp. 1170-1178.
9. Zhang, Y., Lin, H., Zhang, B., and Mi, C., 2006, "Performance Modeling and Optimization of a Novel Multi-Mode Hybrid Powertrain", ASME J. Mech. Des., 128, pp. 79-89.
10. Faulring, E. L., Colgate, I. E., and Peshkin, M. A., 2007, "Power Efficiency of the Rotational-to-Linear Infinitely Variable Cobotic Transmission", ASME J. Mech. Des., 129, pp. 1285-1293.
11. Cacciatori, E., Bonnet, B., Vaughan, N. D., Burke, M. P., Price, D. T., and Wejrzanowski, K., "Launch and Driveability Performance Enhancement for a Parallel Hybrid With a Torque Controlled IVT", SAE Paper No. 2005-01-3831.
12. Kim, K., Park, F. C., Park, Y., and Shizuo, M., 2002, "Design and Analysis of a Spherical Variable Transmission", ASME J. Mech. Des., 124, pp. 21-29.
13. Cho, B., and Vaughan, N. D., 2006, "Dynamic Simulation Model of a Hybrid Powertrain and Controller Using Co-Simulation-Part I: Powertrain Modelling", Int. J. Autom. Technology., 7, pp. 459-468. (Pubitemid 43966767)
14. Chan, C. C., 2002, "The State of the Art of Electric and Hybrid Vehicles", Proc. IEEE, 90(2), pp. 247-275.
15. Lukic, S. M., and Emadi, A., 2004, "Effects of Drivetrain Hybridization on Fuel Economy and Dynamic Performance of Parallel Hybrid Electric Vehicles", IEEE Trans. Veh. Technol., 53(2), pp. 385-389.
16. Syed, F. U., Kuang, M. L., Czubay, J., and Ying, H., 2006, "Derivation and Experimental Validation of a Power-Split Hybrid Electric Vehicle Model", IEEE Trans. Veh. Technol., 55(6), pp. 1731-1747.
17. Mangialardi, L., and Mantriota, G., 1999, "Power Flows and Efficiency in Infinitely Variable Transmissions", Mech. Mach. Theory, 34(7), pp. 973-994.
18. Huang, X., Zhao, K., Luo, Y., and Liu, W., 2005, "Study on a New Split Type of HEV Powertrains", Int. J. Veh. Des., 38(1), pp. 96-105.
19. Kim, Y. S., Park, J. M., and Choi, S. H., 2006, "Design and Performance Verification of Compound CVTs With 2K-H I Type Differential Gear", J. Mech. Sci. Technol., 20(6), pp. 770-781.
20. Benitez, F. G., Madrigal, J. M., and del Castillo, J. M., 2004, "Infinitely Variable Transmission of Racheting Drive Type Based on One-Way Clutches", ASME J. Mech. Des., 126, pp. 673-682.
21. Savaresi, S. M., Taroni, F. L., Previdi, F., and Bittanti, S., 2004, "Control System Design on a Power-Split CVT for High-Power Agricultural Tractors", IEEE/ASME Trans. Mechatron., 9(3), pp. 569-579.
22. Mantriota, G., 2002, "Performances of a Series Infinitely Variable Transmission With a Type I Power Flow", Mech. Mach. Theory, 37(6), pp. 579-597. (Pubitemid 34544419)
23. Mantriota, G., 2002, "Performances of a Parallel Infinitely Variable Transmission With a Type II Power Flow", Mech. Mach. Theory, 37(6), pp. 555-578. (Pubitemid 34544418)
24. Lee, H., and Kim, H., 2003, "CVT Ratio Control for Improvement of Fuel Economy by Considering Powertrain Response Lag", KSME Int. J., 17(11), pp. 1725-1731.
25. Yeo H., Hwang S., and Kim H., 2006, "Regenerative Braking Algorithm for a Hybrid Electric Vehicle With CVT Ratio Control", Proc. Inst. Mech. Eng., Part D (J. Automob. Eng.), 220 (D 11), pp. 1589-1600.
26. Mantriota, G., 2001, "Theoretical and Experimental Study of a Power Split Continuously Variable Transmission System", Proc. Inst. Mech. Eng., Part D (J. Automob. Eng.), 215 (D 7), pp. 837-850. (Pubitemid 34459524)
27. Mantriota, G., 2001, "Theoretical and Experimental Study of a Power Split Continuously Variable Transmission System", Proc. Inst. Mech. Eng., Part D (J. Automob. Eng.), 215 (D 7), pp. 851-864. (Pubitemid 34459525)
28. Mantriota, G., and Pennestrì, E., 2003, "Theoretical and Experimental Efficiency Analysis of Multi DOF Epicyclic Gear Trains", Multibody Syst. Dyn., 9(4), pp. 389-408.