Evaluation of residual stresses in PVD-coatings. Part 1. Review

Strength of Materials

Volumn 42, Issue 3, 2010, Pages 287-296

  Soroka, O B ^a  

^a PISARENKO INSTITUTE OF PROBLEMS OF STRENGTH   (Ukraine)

Author keywords

discontinuous coating; intermediate and buffer interlayers; multilayer coating; nanostructural and nanolayer coatings; reference potential; residual stresses; thermal and structural components of stresses; vacuum plasma coatings

Indexed keywords

DISCONTINUOUS COATINGS; MULTI-LAYER-COATING; NANOLAYER COATING; NANOSTRUCTURAL; NANOSTRUCTURAL AND NANOLAYER COATINGS; STRUCTURAL COMPONENT; VACUUM PLASMA COATINGS;

DISKS (STRUCTURAL COMPONENTS); MULTILAYERS; PHYSICAL VAPOR DEPOSITION; PLASMA DEPOSITION; RESIDUAL STRESSES; VACUUM;

COATINGS;

EID: 77955013335     PISSN: 00392316     EISSN: 15739325     Source Type: Journal    
DOI: 10.1007/s11223-010-9217-1     Document Type: Review

References (64)

1. TA Caughlin DR Nagy HW King 2001 Residual stress, hardness and chemical stability of TiN coating J. Adv. Mater. 33 1 63 68
2. V. I. Kononenko and L. I. Pupan', "Formation of residual stresses in composite coatings," in: High Tech in Mechanical Engineering [in Ukrainian], NTU KhPI, Kharkiv (2005), pp. 209-212.
3. Yu. N. Vnukov (Ed.), A. A. Markov, L. V. Lavrova, and N. Yu. Berdyshev, Deposition of Wear-Resistant Coatings on High-Speed Cutting Tool [in Russian], Tekhnika, Kiev (1992).
4. Y Pauleau 2001 Generation and evolution of residual stresses in physical vapour-deposited thin films Vacuum 61 2-4 175 181 10.1016/S0042-207X(00)00475-9 (Pubitemid 32420740)
5. G Knuyt W Lauwerens LM Stals 2000 A unified theoretical model for tensile and compressive residual stresses Thin Solid Films 370 1-2 232 237 10.1016/S0040-6090(00)00944-5 2000TSF...370..232K
6. DS Rickerby 1986 Internal stress and adherence of titanium nitride coatings J. Vacuum Sci. Technol. 4 6 2809 2814 10.1116/1.573683 1986JVST....4.2809R
7. CV Falub M Ante W Kalls 2007 Interdependence between stress and texture in arc evaporated Ti-Al-N thin films Surface Coatings Techn. 201 12 5891 5898 10.1016/j.surfcoat.2006.10.046 (Pubitemid 46173137)
8. DS Rickerby AM Jones BA Bellamy 1989 X-ray diffraction studies of physically vapour-deposited coatings Surface Coatings Techn. 37 1 111 137 10.1016/0257-8972(89)90124-2
9. DS Rickerby G Eckold KN Scott IM Buckley-Golder 1987 The interrelationship between internal stress, processing parameters and microstructure of physically vapour deposited and thermally sprayed coatings Thin Solid Films 154 1-2 125 141 10.1016/0040-6090(87)90358-0 1987TSF...154..125R (Pubitemid 18553704)
10. SJ Bull 1992 Correlation of microstructure and properties of hard coatings Vacuum 43 5-7 387 391 10.1016/0042-207X(92)90042-U
11. M Ahlgren H Blomqvist 2005 Influence of bias variation on residual stress and texture in TiAlN PVD coatings Surface Coatings Techn. 200 1-4 157 160 10.1016/j.surfcoat.2005.02.078 (Pubitemid 41268929)
12. S-S Zhao Du Hao W-G Hua, et al. 2007 The depth distribution of residual stresses in (Ti, Al)N films: Measurement and analysis J. Mater. Res. 22 10 2659 2662 10.1557/jmr.2007.0363 2007JMatR..22.2659Z (Pubitemid 47618171)
13. C Liu Z Jin Wu Weltao, et al. 1990 Residual stress and damage mode of hard Ti(CN) coating Acta Met. Sin. 3 10 246 251
14. ROE Vijgen JH Dautzenderg 1995 Mechanical measurement of the residual stress in thin PVD films Thin Solid Films 270 2 264 269 10.1016/0040-6090(95) 06984-4 1995TSF...270..264V
15. US Pat. 5075181. D. T. Quinto and H. J. Kaufmann, High Hardness/High Compressive Stress Multilayer Coated Tool, Publ. 24.12.91.
16. T Murotani H Hirose T Sasaki K Okazaki 2000 Study on stress measurement of PVD-coating layer Thin Solid Films 377-378 1 617 620 10.1016/S0040-6090(00) 01280-3 (Pubitemid 32035281)
17. NJM Carvalho E Zoestbergen BJ Kooi J Th M De Hosson 2003 Stress analysis and microstructure of PVD monolayer TiN and multilayer TiN/(Ti, Al)N coatings Thin Solid Films 429 1-2 170 189
18. V. S. Antonyuk, O. B. Soroka, A. V. Rutkovs'kyi, and V. I. Mirnenko, "Residual stresses in vacuum plasma TiN, (TiAl)N, (TiC)N coatings," Visn. of the V. Dal' Skhidnoukr. Nat. Univ., No. 7 (77), Pt. 2, 206-210 (2004).
19. MA Djouadi D Bouchier et V Stambouli 1991 Effets thermiques sur la contrainte inforne dans le nitrure de bore depose par evaporation assistes par faisceau d'ions Mem. Etud. Sci. Rev. Met. 88 9 628 630
20. C Liu Z Jin Wu Weltao 1990 Residual stress and damage mode of hard Ti(CN) coating Acta Met. Sci. 26 1 B27 B32
21. V films Jap. J. Appl. Phys. 30 9A 2052 2062 1991JaJAP..30.2058J
22. H Oettel R Wiedemann S Preissler 1995 Residual stresses in nitride hard coatings prepared by magnetron sputtering and arc evaporation Surface Coatings Techn. 74-75 Pt. 1 273 278 10.1016/0257-8972(95)08235-2
23. M Leoni P Scardi S Rossi, et al. 1999 (Ti, Cr)N and Ti/TiN PVD coatings on 304 stainless steel substrates: Texture and residual stress Thin Solid Films 345 2 263 269 10.1016/S0040-6090(98)01741-6 1999TSF...345..263L
24. V Valvoda R Cerny R Kuzel, et al. 1988 Dependence of microstructure of TiN coatings on their thickness Thin Solid Films 158 2 225 232 10.1016/0040-6090(88)90024-7 1988TSF...158..225V (Pubitemid 18620456)
25. DB Lewis D Reitz C Wustefeld, et al. 2006 Chromium nitride/niobium nitride nano-scale multilayer coatings deposited at low temperature by the combined cathodic arc/unbalanced magnetron technique Thin Solid Films 503 1-2 133 142 10.1016/j.tsf.2005.08.369 2006TSF...503..133L (Pubitemid 43348475)
26. E Bemporad M Sebastiani C Pecchio S Rossi 2006 High thickness Ti/TiN multilayer thin coatings for wear resistant applications Surface Coatings Techn. 201 6 2155 2165 10.1016/j.surfcoat.2006.03.042 (Pubitemid 44742911)
27. AG Trapezon 2007 Methodological problems in the investigation of thin hardening films Strength Mater. 39 2 178 188 10.1007/s11223-007-0023-3 (Pubitemid 46909647)
28. B Denkena B Breidenstein 2008 Influence of the residual stress state on cohesive damage of PVD-coated carbide cutting Adv. Eng. Mater. 10 7 613 616 10.1002/adem.200800063
29. AG Trapezon BA Lyashenko AV Rutkovskii 1995 Effect of vacuum deposited coatings on the fatigue strength of commercial-grade titanium Strength Mater. 27 11-12 659 664 10.1007/BF02206239
30. AV Rutkovskii BA Lyashenko AP Gopkalo EB Soroka 1999 On the hardening effect of plasma-deposited coatings Strength Mater. 31 6 616 618 10.1007/BF02510898
31. K. Kamachi, T. Ito, and T. Yamamoto, "Residual stresses of chemical carbides coated with TiN by CVD process and by PVD process," in: Proc. Int. Conf. on Residual Stresses in Sciences and Technology (Garmish-Partenkirchen, 1986), Oberursel (1987), Vol. 1, pp. 479-483.
32. DT Quinto AT Santhanam PC Jindal 1988 Mechanical properties, structure and performance of chemically vapor-deposited and physically vapor-deposited coated carbide tools Mater. Sci. Eng. 105-106 Pt. 2 443 452
33. FR Lamastra F Leonardi R Montanan, et al. 2006 X-ray residual stress analysis on CrN/Cr/CrN multilayer PVD coatings deposited on different steel substrates Surface Coatings Techn. 200 22-23 6172 6175 10.1016/j.surfcoat.2005. 11.013 (Pubitemid 44307894)
34. DA Keller T Hirsch P Hora V Tomala 1993 Einfluss der Eigenspannungen in Schichtverbundwerkstoffen bei Trockenreibung Blech, Rohre, Profile 40 11 834 842
35. F Klocke T Krieg 1999 Coated tools for metal cutting - features and applications CIRP Ann. 48 2 515 525 10.1016/S0007-8506(07)63231-4
36. VP Tabakov MYu Smirnov AV Tsirkin 2006 Mechanism of fracture of wear-resistant coatings on cutting tool during cutting Uprochn. Tekhnol. Pokryt. 6 41 45
37. VA Boguslaev PD Zhemanyuk VK Yatsenko, et al. 2005 Enhancement in the load-carrying capacity of compressor rotor blades Vestn. Dvigatelestr. 3 79 89
38. A Laukkanen K Holmberg J Koskinen, et al. 2006 Tribological contact analysis of a ball sliding on a flat coating surface. Pt. III: Fracture toughness calculation and influence of residual stresses Surface Coatings Techn. 200 12-13 3824 3844 10.1016/j.surfcoat.2005.03.042 (Pubitemid 43250442)
39. K Holmberg H Ronkeinen A Laukkanen, et al. 2008 Tribological analysis of TiN and DLC coated contacts by 3D FEM modeling and stress simulation Wear 264 9-10 877 884 10.1016/j.wear.2006.12.084 (Pubitemid 351253582)
40. HC Choi KS Kim 1992 Analysis of the spontaneous interfacial decohesion of a thin surface film J. Mech. Phys. Solids 40 1 75 103 10.1016/0022-5096(92) 90254-Y 1992JMPSo..40...75C
41. DS Rickerby RB Newbery 1988 Structure, properties and applications of TiN coatings produced by sputter ion plating Vacuum 38 3 161 166 10.1016/0042-207X(88)90172-8 (Pubitemid 18626589)
42. V Teixeira 2001 Mechanical integrity in PVD coatings due to the presence of residual stresses Thin Solid Films 392 2 276 281 10.1016/S0040-6090(01)01043- 4 2001TSF...392..276T (Pubitemid 32621347)
43. B. A. Lyashenko, V. V. Rishin, S. Yu. Sharivker, et al., "On the analysis of the stress state of coatings," in: Refractory and Heat-Resistant Coatings (Proc. IVth All-Union Meeting) [in Russian], Nauka, Leningrad (1969), pp. 454-456.
44. AV Byakova VG Gorbach 1994 Fracture toughenss and evaluation of coating strength with an initial residual stress field Strength Mater. 26 1 40 48 10.1007/BF02208051
45. S Rossi L Fedrizzi M Leoni, et al. 1999 (Ti, Cr)N and Ti/TiN PVD coatings on 304 stainless steel substrates: wear-corrosion behaviour Thin Solid Films 350 1-2 161 167 10.1016/S0040-6090(99)00235-7 1999TSF...350..161R
46. S Kamiya H Nagasawa K Yamanobe M Saka 2005 A comparative study of the mechanical strength of chemical vapor-deposited diamond and physical vapor-deposited hard coatings Thin Solid Films 473 1 123 131 10.1016/j.tsf.2004.05.135 2005TSF...473..123K
47. DA Hills DW Ashelby 1982 The influence of residual stress on contact-load- bearing capacity Wear 75 2 221 239 10.1016/0043-1648(82)90150-8
48. A. A. Andreev, L. P. Sablev, V. M. Shulaev, S. N. Grigor'ev, Vacuum-Arc Devices and Coatings [in Russian], NNTs KhFTI, Kharkov (2005).
49. A. S. Vereshchaka, B. Karpushevsky, and L. G. Dyubner., "Analysis of the main aspects of the application problem for multilayer composite nano-structured functional coatings for cutting tool," in: Advanced Technologies in Mechanical Engineering [in Ukrainian] (2008), Issue 2, pp. 87-100.
50. M Bromark M Larson P Hedenqvist S Hogmark 1997 Wear of Ti/TiN multilayer coatings Surface Coating Techn. 90 3 217 223 10.1016/S0257-8972(96)03141-6 (Pubitemid 27313059)
51. DS Rickerby SJ Bull T Robertson A Hendry 1990 The role of titanium in the abrasive wear resistance of physically vapour-deposited TiN Surface Coating Techn. 41 1 63 74 10.1016/0257-8972(90)90130-5 (Pubitemid 20682406)
52. M Herranen U Wiklund JO Carlsson S Hogmark 1998 Corrosion behaviour of Ti/TiN multilayer coated tool steel Surface Coating Techn. 99 1-2 191 196 10.1016/S0257-8972(97)00525-2
53. JM Castanho MT Vieira 2003 Effect of ductile layers in mechanical behaviour of TiAlN thin coatings J. Mater. Proc. Techn. 143-144 1 352 357 10.1016/S0924-0136(03)00454-0
54. J Gerth U Wiklund 2008 The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel Wear 264 9-10 885 892 10.1016/j.wear.2006.11.053 (Pubitemid 351253584)
55. GS Kim SY Lee JH Hahn, et al. 2002 Effects of the thickness of Ti buffer layer on the mechanical properties of TiN coatings Surface Coating Techn. 171 1-3 83 90 10.1016/S0257-8972(03)00243-3
56. BA Lyashenko AV Rutkovskii EB Soroka NV Lipinskaya 2001 On the reduction of residual stresses in plasma-vacuum-deposited coatings Strength Mater. 33 4 344 348 10.1023/A:1012456526931
57. JA Sue 1993 Development of arc evaporation of non-stoichiometric titanium nitride coatings Surface Coatings Techn. 61 1-3 115 120 10.1016/0257-8972(93) 90212-7
58. J Musil 2000 Hard and superhard nanocomposite coatings Surface Coatings Techn. 125 1-3 322 330 10.1016/S0257-8972(99)00586-1 (Pubitemid 30233932)
59. S Veprek S Reiprich 1995 A concept for the design of novel superhard coatings Thin Solid Films 268 1-2 64 71 10.1016/0040-6090(95)06695-0 1995TSF...268...64V
60. B. A. Lyashenko, A. Ya. Movshovich, and A. I. Dolmatov, "Reinforcing coatings with discrete structure," Tekhnol. Systemy, No. 4 (10), 17-25 (2001).
61. V. A. Rutkovskii, V. S. Antonyuk, V. M. Volkogon, et al., A Means of Depositing Wear-Resistant Discontinuous Coatings [in Ukrainian], Patent of Ukraine 68303, MPK S23 S14/32, Bull. No. 7, Valid since July 15, 2004.
62. EK Solovykh BA Lyashenko AV Rutkovskii, et al. 2007 Technological support for vacuum-plasma coatings with discrete structure Tekhnol. Systemy 2 22 27
63. BA Lyashenko VS Antonyuk EB Soroka AV Rutkovskii 2005 On the lowering of residual stresses in vacuum plasma coatings of discrete structure Sverkhtverd. Mater. 2 72 75
64. E. B. Soroka, "Effect of coating parameters and residual stresses on the wear resistance of cutting tool," in: Current Problems Involving Preparatory Procedures for Production, Supply Production, Treatment, Assembly and Repair in the Industry and Transportation [in Russian], Proc. VII Int. Scientific Workshop (Febr. 20-22, 2007, Svalyava), ATM Ukrainy, Kiev (2007), pp. 175-177.