Coated tools for metal cutting - features and applications

CIRP Annals - Manufacturing Technology

Volumn 48, Issue 2, 1999, Pages 515-525

  Klocke, F ^a   Krieg, T ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

COST EFFECTIVENESS; CUTTING TOOLS; FAILURE ANALYSIS; LIFE CYCLE; MACHINING; PROCESS ENGINEERING; PRODUCTION ENGINEERING; PROTECTIVE COATINGS; SERVICE LIFE; TRIBOLOGY; WEAR RESISTANCE;

COATED CUTTING TOOLS;

METAL CUTTING;

EID: 0033345183     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)63231-4     Document Type: Article

References (46)

1. van Luttervelt, C.A., Childs, T.H.C., Jawahir, I.S., Klocke, F., and Venuvinod, P.K., 1998, "Present Situation and Future Trends in Modelling of Machining Operations," Keynote Paper, Annals of the CIRP, 48/2, pp. 587-626.
2. Jawahir I.S., Balaji A. K., 1999, The effects of Tool Coatings on Machining Performance, not published yet
3. Löffler F., Barimani A., 1990, PVD-Schichten für den tribologischen Einsatz, Ingenieur-Werkstoffe 12, 2, pp. 56-59
4. Taminiau D.A., Dautzenberg J.H., 1999, How to Understand Friction and Wear with Classical Physics, unpublished manuscript
5. Kubaschewski O., Alcock C.B., 1979, Metallurgical thermochemistry, Pergamon Press
6. Barin I., Knacke O., 1973, Thermochemical properties of inorganic substances, Springer Verlag
7. Derfinger V. et al., 1999, Balinit Schichten-die Lösung für moderne Zerspanungsaufgaben, 3. VSM-Seminar "neue Entwicklungen in der spanenden Bearbeitung, January 28, Regensdorf-CH
8. Lugscheider E., Bobzin K., 1999, unpublished progress report, collaborate research center SFB 442, RWTH -Aachen
9. Quinto D. T., Santhanam A. T. Jindal P. C., 1989, Int. J. Refrac. Hard Materials 8, 2, 95-101
10. Wertheim R., 1998, Development and Applications of Coated Cutting Tool Carbides, Rewrite of an Oral Presentation held at CIRP General Assembly in Athens
11. Haefer R.A., 1987, Oberflächen- und Dünnschicht-technologie, Teil 1, Beschichtungen von Oberflächen, Springer-Verlag, Berlin
12. x)N Coatings in Dry Drilling , Surface and Coatings Technology, 94-95, pp. 603-609
13. R. Messier, A. P. Giri, R. A. Roy, Vac. Sci. Techn. A2(2), 1984, pp.500-505
14. H. Satoh, Vac. Sci. Techn. A, July/Aug. 1992
15. Seytoyama M., et al., 1996, Formation of Cubic-AIN in TiN/AIN Superlattice, Surface and Coatings Technology, 86-87, pp. 225-230
16. Akiyama K. et al., 1997, A Study of the Adhesion Between CVD Layers and a Cemented Carbide Substrate by AEM Analysis, Surface and Coatings Technology, 94-95, pp. 328-332s
17. Tönshoff H.-K., Mohlfeld A., 1998, Increasing Interface Strength by Mechanical Substrate Treatment , Production Engineering, V/1, pp. 603-609
18. Chollet L; Laufenburger A; Biselli C, 1988, Relation between residual stresses and adhesion of hard coatings, Second Int. Conf. on Residual Stresses ICRS2, Societe Fraincaise de Metallurgie, Nancy, F, 23.-25.11., pp. 901-906
19. Vijgen R.O.E., Dautzenberg J.H., 1995, Mechanical measurement of the residual stress in thin PVD films, Thin Solid Films 270, pp. 264-269
20. Neumaier P., 1989, Härtebestimmung an Beschichtungen von Metalloberflächen, Metalloberfläche, 2
21. Lugscheider E., Geiler H.D., Lake M., Zimmermann H., 1996, Investigation of thermophysical properties of AIP coated cutting tools for dry machining, Surface and Coatings Techn. 86-87, pp. 803-808
22. Klocke F. et al, 1998, Improved Cutting Processes with Adapted Coating Systems, Annals of the CIRP, 47/1, pp. 65-68
23. Czichos H., Habig K.-H., 1992, Tribologie - Handbuch: Reibung und Verschleiß; Systemanalyse, Prüftechnik Werkstoffe und Konstruktionselemente, Vieweg Wiesbaden
24. Bouzakis K.-D., et al., 1998, Experimental and FEM Analysis of the Fatigue Behaviour of PVD-Coatings on HSS Substrate in Milling, Annals of the CIRP, 47/1, pp. 69-71
25. Bouzakis K.-D., Vidakis, N., 1999, Advanced Physically Vapour Deposited Coatings - State of the Art, Innovations and Future Trends, Tribology in Industry, too be published
26. Yamada Y., 1996, High Speed Cutting Performance of (AI, Ti)N Coated Endmills, Proc. 3rd Int. Conf. On Progress of Cutting and Grinding Nov. 19-22, pp. 211-216
27. Quinto, J. et al., 1999, PVD coatings for turning, Cutting tool engineering, 02, pp. 42-52
28. Klocke F., Eisenblätter G., 1997, Dry cutting, Annals of the CIRP, 46/2
29. Fleischer W. et al., 1999, PVD coatings for Dry Cutting of Al-alloy and Bronze, Proc. of SVC Conf. Boston, pp. 80-88
30. Weinert K. et al., 1998, Machining of Spray Deposited Al-Si Alloys, Production Engineering, Vol. V/2, pp. 19-22
31. Weinert K., Biermann D., Liedschulte M., 1998, Drilling of Magnesium Matrix Composites, IDPT 98 Berlin
32. Biermann, D., 1995, Untersuchungen zum Drehen von Aluminiummatrix- Verbundwerkstoffen, Fortschrittsberichte Reihe 2, Nr. 338, VDI-Verlag Düsseldorf
33. Brun M. K., Lee M., 1988, Wear characteristics of various hard materials for machining SiC reincorced aluminium atloy, ASME Int. Conf. On Wear of Materials, Vancouver Canada 14.4.-18.4., pp. 539-544
34. Tomac N., Tønessen K., 1992, Machinability of Particulate Aluminium Matrix composites, Annals of the CIRP, 41/1, pp. 55-58
35. Weinert K., 1993, A Consideration of Tool wear Mechanism when Machining Metal Matrix Composites MMC, Annals of the CIRP, 42/1, pp. 95-98
36. Zum Gahr K.-H., 1987, Microstructure and wear of materials, Tribology series 10, Elsevier, Amsterdam
37. Brinksmeier E., Berger U., Janssen R., 1997, High Speed Machining of TiAl6V4 for Aircraft Applications, Proc. 1st French and German Conf. On High Speed Machining, June 17-18, Metz, pp. 295-306
38. Brinksmeier E., Berger U., Janssen R., 1998, Advanced Sensoric and Machining System for Manufacturing and Repair of Jet Engine Components, Proc. Of 31st CIRP Int. Seminar on Manuf. Syst., 26.-28.5., Berkley
39. Uhlmann E., Brücher M., Lachmund U., 1998, Einsatzverhalten diamantbeschichteter Werkzeuge bei der Trockenbearbeitung hochfester und abrasiver NE-Legierungen, Werkstoffwoche, Symposium 5, Fertigungstechnik, München
40. Weiner M., 1999, Coatings move forward, cutting tool engineering, February, pp. 22-29
41. Pulker, H. K. et al., 1989, Wear and Corrosion resistant Coatings by CVD and PVD, Ehningen bei Böblingen: expert-Verlag
42. Venkatesh, V. C., Ye, T. C., Quinto, D. T., Hoy, D. E. P., 1991, Performance Studies of Uncoated, CVD-Coated and PVD-Coated Carbides in Turning and Muling, Annals of the CIRP, 40/1, 545-550
43. N.N., 1991, Die Schneide verdient das Geld. Schneidstoffe - Indikatoren vielschichtiger internationaler Entwicklungen, Fertigung, Landsberg, 2 Sonderheft Werkzeuge, pp. 12-15
44. N.N., 1994, AB Sandvik Coromant: Modern Metal Cutting
45. Cfark I.E., Sen P.K., 1998, Advances in the Development of Ultrahard Cutting Tool Materials, Ind. Diamond Rev., 2, pp. 40-44
46. Stock H.R., 1997, Stand der cBN-Prozeßentwicklung (IBAD), Proc. of MaTech-Statusseminar: Superharte Schichten für tribologische Anwendungen, June 4-5, Braunschweig