Bond strength and interfacial characterization of eight low fusing porcelains to cp Ti

Dental Materials

Volumn 26, Issue 3, 2010, Pages 264-273

  Zinelis, S ^a   Barmpagadaki, X ^b   Vergos, V ^c   Chakmakchi, M ^a   Eliades, G ^a  

^a UNIVERSITY OF ATHENS   (Greece)

^b Technological Educational Institution of Athens ^*

^c UNIVERSITY OF WEST ATTICA   (Greece)

Author keywords

Interfacial characterization; Metal ceramic; SEM EDS; Three point bending; Ti porcelain

Indexed keywords

ACRYLIC RESINS; BACKSCATTERED ELECTRON IMAGING; BOND CHARACTERIZATION; BOND STRENGTH; CERAMIC JOINTS; CROSSHEAD SPEED; DENTAL PORCELAIN; EDS ANALYSIS; FRACTURE MODE; IN-LINE; INTERFACIAL ANALYSIS; INTERFACIAL CHARACTERIZATION; LOW FUSING PORCELAIN; MULTIPLE COMPARISON TEST; MUTUAL DIFFUSION; SEM; SEM/EDS; SEM/EDS ANALYSIS; THREE POINT BENDING;

FRACTURE; MATERIALS; METAL ANALYSIS; PORCELAIN; POWDER METALS; RESINS; SPECIMEN PREPARATION; TROPICAL ENGINEERING; ZIRCONIUM;

BOND STRENGTH (MATERIALS);

ALLOY; TITANIUM;

ANALYSIS OF VARIANCE; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; COMPLIANCE (PHYSICAL); DENTAL BONDING; DENTAL CARE; ELECTRON PROBE MICROANALYSIS; HEAT; MATERIALS TESTING; PLIABILITY; RADIATION SCATTERING; RANDOMIZATION; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TOOTH PROSTHESIS; YOUNG MODULUS;

ANALYSIS OF VARIANCE; COMPLIANCE; DENTAL BONDING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; ELASTIC MODULUS; ELECTRON PROBE MICROANALYSIS; HOT TEMPERATURE; MATERIALS TESTING; METAL CERAMIC ALLOYS; MICROSCOPY, ELECTRON, SCANNING; PLIABILITY; RANDOM ALLOCATION; SCATTERING, RADIATION; SURFACE PROPERTIES; TITANIUM;

EID: 75149145382     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.11.004     Document Type: Article

References (49)

1. Kaus T., Probster L., and Weber H. Clinical follow-up study of ceramic veneered titanium restorations-three-year results. Int J Prosthodont 9 (1996) 9-15
2. Marklund S., Bergman B., Hedlund S.O., and Nilson H. An intraindividual clinical comparison of two metal-ceramic systems: a 5-year prospective study. Int J Prosthodont 16 (2003) 70-73
3. Nakajima H., and Okabe T. Titanium in dentistry: development and research in the U.S.A. Dent Mater J 15 (1996) 77-90
4. Bergman B., Marklund S., Nilson H., and Hedlund S.O. An intraindividual clinical comparison of 2 metal-ceramic systems. Int J Prosthodont 12 (1999) 444-447
5. Bergman B., Nilson H., and Andersson M. A longitudinal clinical study of procera ceramic-veneered titanium copings. Int J Prosthodont 12 (1999) 135-139
6. Walter M., Reppel P.D., Boning K., and Freesmeyer W.B. Six-year follow-up of titanium and high-gold porcelain-fused-to-metal fixed partial dentures. J Oral Rehabil 26 (1999) 91-96
7. Wang R.R., and Fenton A. Titanium for prosthodontic applications: a review of the literature. Quintessence Int 27 (1996) 401-408
8. Eliopoulos D., Zinelis S., and Papadopoulos T. The effect of investment material type on the contamination zone and mechanical properties of commercially pure titanium castings. J Prosthet Dent 94 (2005) 539-548
9. Zinelis S. Effect of pressure of helium, argon, krypton, and xenon on the porosity, microstructure, and mechanical properties of commercially pure titanium castings. J Prosthet Dent 84 (2000) 575-582
10. Lovgren R., Andersson B., Carlsson G.E., and Odman P. Prospective clinical 5-year study of ceramic-veneered titanium restorations with the Procera system. J Prosthet Dent 84 (2000) 514-521
11. Adachi M., Mackert Jr. J.R., Parry E.E., and Fairhurst C.W. Oxide adherence and porcelain bonding to titanium and Ti-6Al-4V alloy. J Dent Res 69 (1990) 1230-1235
12. Kimura H., Horng C.J., Okazaki M., and Takahashi J. Oxidation effects on porcelain-titanium interface reactions and bond strength. Dent Mater J 9 (1990) 91-99
13. Wang R.R., and Fung K.K. Oxidation behavior of surface-modified titanium for titanium-ceramic restorations. J Prosthet Dent 77 (1997) 423-434
14. Atsu S., and Berksun S. Bond strength of three porcelains to two forms of titanium using two firing atmospheres. J Prosthet Dent 84 (2000) 567-574
15. Pang I.C., Gilbert J.L., Chai J., and Lautenschlager E.P. Bonding characteristics of low-fusing porcelain bonded to pure titanium and palladium-copper alloy. J Prosthet Dent 73 (1995) 17-25
16. Probster L., Maiwald U., and Weber H. Three-point bending strength of ceramics fused to cast titanium. Eur J Oral Sci 104 (1996) 313-319
17. Nilson H., Bergman B., Bessing C., Lundqvist P., and Andersson M. Titanium copings veneered with procera ceramics: a longitudinal clinical study. Int J Prosthodont 7 (1994) 115-119
18. Al Hussaini I., and Al Wazzan K.A. Effect of surface treatment on bond strength of low-fusing porcelain to commercially pure titanium. J Prosthet Dent 94 (2005) 350-356
19. Kononen M., and Kivilahti J. Bonding of low-fusing dental porcelain to commercially pure titanium. J Biomed Mater Res 28 (1994) 1027-1035
20. Yan M., Kao C.T., Ye J.S., Huang T.H., and Ding S.J. Effect of preoxidation of titanium on the titanium-ceramic bonding. Surf Coat Technol 202 (2007) 288-293
21. Cai Z., Bunce N., Nunn M.E., and Okabe T. Porcelain adherence to dental cast CP titanium: effects of surface modifications. Biomaterials 22 (2001) 979-986
22. Troia Jr. M.G., Henriques G.E., Mesquita M.F., and Fragoso W.S. The effect of surface modifications on titanium to enable titanium-porcelain bonding. Dent Mater 24 (2008) 28-33
23. Sadeq A., Cai Z., Woody R.D., and Miller A.W. Effects of interfacial variables on ceramic adherence to cast and machined commercially pure titanium. J Prosthet Dent 90 (2003) 10-17
24. Yamada K., Onizuka T., Endo K., Ohno H., and Swain M.V. The influence of Goldbonder (TM) and pre-heat treatment on the adhesion of titanium alloy and porcelain. J Oral Rehabil 32 (2005) 213-220
25. Yamada K., Onizuka T., Sumii T., and Swain M.V. The effect of Goldbonder on the adhesion between porcelain and pure titanium. J Oral Rehabil 31 (2004) 775-784
26. Papadopoulos T., Tsetsekou A., and Eliades G. Effect of aluminium oxide sandblasting on cast commercially pure titanium surfaces. Eur J Prosthodont Restor Dent 7 (1999) 15-21
27. Hammad I.A., and Talic Y.F. Designs of bond strength tests for metal-ceramic complexes: review of the literature. J Prosthet Dent 75 (1996) 602-608
28. Yoda M., Konno T., Takada Y., Iijima K., Griggs J., Okuno O., et al. Bond strength of binary titanium alloys to porcelain. Biomaterials 22 (2001) 1675-1681
29. Lee K.M., Cai Z., Griggs J.A., Guiatas L., Lee D.J., and Okabe T. SEM/EDS evaluation of porcelain adherence to gold-coated cast titanium. J Biomed Mater Res B Appl Biomater 68 (2004) 165-173
30. ISO 9693 Metal-ceramic dental restorative systems. Geneva: International Organization for Standardization; 1999.
31. Ozcan I., and Uysal H. Effects of silicon coating on bond strength of two different titanium-ceramic to titanium. Dent Mater 21 (2005) 773-779
32. Suansuwan N., and Swain M.V. Adhesion of porcelain to titanium and a titanium alloy. J Dent 31 (2003) 509-518
33. Chakmakchi M., Eliades G., and Zinelis S. Bonding agents of low fusing cpTi porcelains: elemental and morphological characterization. J Prosthodont Res 53 (2009) 166-171
34. Inan O., Acar A., and Halkaci S. Effects of sandblasting and electrical discharge machining on porcelain adherence to cast and machined commercially pure titanium. J Biomed Mater Res B Appl Biomater 78 (2006) 393-400
35. Shevchencho N., Itin V., and Tukhfatullin A. Reaction of stomatological porcelain with titanium and titanium nickelide during sintering. Powder Metall Met C+ 40 (2001) 42-49
36. DIN 13927 Metal-ceramic system: German Standard Institution Berlin. Beuth Verlag; 1990.
37. Lenz J., Schwarz S., Schwickerath H., Sperner F., and Schafer A. Bond strength of metal-ceramic systems in three-point flexure bond test. J Appl Biomater 6 (1995) 55-64
38. White S.N., Ho L., Caputo A.A., and Goo E. Strength of porcelain fused to titanium beams. J Prosthet Dent 75 (1996) 640-648
39. Derand T., and Hero H. Bond strength of porcelain on cast vs. wrought titanium. Scand J Dent Res 100 (1992) 184-188
40. Korkmaz T., and Asar V. Comparative evaluation of bond strength of various metal-ceramic restorations. Mater Des 30 (2009) 445-451
41. Oka K., Hanawa T., Kon M., Lee H.H., Kawano F., Tomotake Y., et al. Effect of barium in porcelain on bonding strength of titanium-porcelain system. Dent Mater J 15 (1996) 111-120
42. Zhang H., Guo T.W., Li J.M., Pan J.G., Dang Y.G., and Tong Y. Cr-Ti-Al-N complex coating on titanium to strengthen Ti/porcelain bonding. Nan Fang Yi Ke Da Xue Xue Bao 26 (2006) 154-157
43. Ho W.F., Chiang T.Y., Wu S.C., and Hsu H.C. Mechanical properties and deformation behavior of cast binary Ti-Cr alloys. J Alloy Compd 468 (2009) 533-538
44. Papadopoulos T.D., and Spyropoulos K.D. The effect of a ceramic coating on the cpTi-porcelain bond strength. Dent Mater 25 (2009) 247-253
45. Acar A., Inan O., and Halkaci S. Effects of airborne-particle abrasion, sodium hydroxide anodization, and electrical discharge machining on porcelain adherence to cast commercially pure titanium. J Biomed Mater Res B Appl Biomater 82 (2007) 267-274
46. Vasquez V., Ozcan M., Nishioka R., Souza R., Mesquita A., and Pavanelli C. Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium. Dent Mater J 27 (2008) 7-15
47. Yilmaz H., and Dincer C. Comparison of the bond compatibility of titanium and an NiCr alloy to dental porcelain. J Dent 27 (1999) 215-222
48. Oyafuso D.K., Ozcan M., Bottino M.A., and Itinoche M.K. Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks. Dent Mater 24 (2008) 351-356
49. Troia M.G., Henriques G.E.P., Nobilo M.A.A., and Mesquita M.F. The effect of thermal cycling on the bond strength of low-fusing porcelain to commercially pure titanium and titanium-aluminium-vanadium alloy. Dent Mater 19 (2003) 790-796