Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium

Dental Materials Journal

Volumn 27, Issue 1, 2008, Pages 7-15

  Vásquez, Vanessa ^a   Özcan, Mutlu ^b   Nishioka, Renato ^a   Souza, Rodrigo ^a   Mesquita, Alfredo ^a   Pavanelli, Carlos ^a  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b UNIVERSITY MEDICAL CENTER GRONINGEN   (Netherlands)

Author keywords

Aging; Flexural strength; Titanium

Indexed keywords

ALUMINUM OXIDE; BIOMEDICAL AND DENTAL MATERIALS; GLASS; TITANIUM; TITANIUM DIOXIDE; WATER;

ARTICLE; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL BONDING; DENTAL CARE; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; PLIABILITY; PRESSURE; RANDOMIZED CONTROLLED TRIAL; SURFACE PROPERTY; TEMPERATURE; TIME; TOOTH PROSTHESIS;

ALUMINUM OXIDE; DENTAL BONDING; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; GLASS; HUMANS; MATERIALS TESTING; PLIABILITY; PRESSURE; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS; TITANIUM; WATER;

EID: 42449111293     PISSN: 02874547     EISSN: None     Source Type: Journal    
DOI: 10.4012/dmj.27.7     Document Type: Article

References (45)

1. Wang RR, Fenton A. Titanium for prosthodontic applications: a review of the literature. Quintessence Int 1996; 27: 401-408.
2. Lautenschlager EP, Monaghan P. Titanium and titanium alloys as dental materials. Int Dent J 1993; 43: 245-253.
3. Könönen M, Kivilahti J. Bonding of low-fusing dental porcelain to commercially pure titanium. J Biomed Mater Res 1994; 28: 1027-1035.
4. Yoda M, Konno T, Takada Y, Iijima K, Griggs J, Okuno O, Kimura K, Okabe T. Bond strength of binary titanium alloys to porcelain. Biomater 2001; 22: 1675-1681.
5. Akagi K, Okamoto Y, Matsuura T, Horibe T. Properties of test metal ceramic titanium alloys. J Prosthet Dent 1992; 68: 462-467.
6. Kimura H, Horng CJ, Okazaki M, Takahashi J. Oxidation effects on porcelain-titanium interface reactions and bond strength. Dent Mater J 1990; 9: 91-99.
7. Adachi M, Mackert JR Jr, Parry EE, Fairhurst CW. Oxide adherence and porcelain bonding to titanium and Ti-6Al-4V alloy. J Dent Res 1990; 69: 1230-1235.
8. Könönen M, Kivilahti J. Fusing of dental ceramics to titanium. J Dent Res 2001; 80: 840-854.
9. Anusavice KJ. Phillips: Materiais dentários, Trad Dourado et al., 11th ed, Elsevier, Rio de Janeiro, 2005, p.763.
10. Esquivel JF, Chai J, Wozniak WT. The physical properties of low-fusing porcelains for titanium. Int J Prosthodont 1996; 9: 563-571.
11. Herø H, Syverud M, Waarli M. Mold filling and porosity in castings of titanium. Dent Mater 1993; 19: 15-18.
12. King AW, Lautenschlager E, Chai J, Gilbert J. A comparison of the hardness of different types of titanium and conventional metal ceramics. J Prosthet Dent 1994; 72: 314-319.
13. Syverud M, Herø H. Mold filling of Ti casting using investments with different gas permeability. Dent Mater 1995; 11: 14-18.
14. Yilmaz H, Dinçer C. Comparison of the bond compatibility of titanium and an NiCr alloy to dental porcelain. J Dent 1999; 27: 215-222.
15. Powers JM, Sakaguchi RL. Craig's restorative dental materials, 12th ed, Mosby, St. Louis, 2006, p.632.
16. Hammad IA, Talic YF. Designs of bond strength tests for metal ceramic complexes: review of the literature. J Prosthet Dent 1996; 75: 602-608.
17. White SN, Li ZC, Yu Z, Kipnis V. Relationship between static chemical and cyclic mechanical fatigue in a feldspathic porcelain. Dent Mater 1997; 13: 103-110.
18. Poljak-Guberina R, Catovic A, Jerolimov V, Franz M, Bergman V. The fatigue strength of the interface between Ag-Pd alloy and hydrothermal ceramic. Dent Mater 1999; 15: 417-420.
19. Pröbster L, Maiwald U, Weber H. Three-point bending strength of ceramics fused to cast titanium. Eur J Oral Sci 1996; 104: 313-319.
20. Wang RR, Welsch GE, Castro-Cedeno M. Interfacial reactions of cast titanium with mold materials. Int J Prosthodont 1998; 11: 33-43.
21. Garbelini WJ, Henriques GEP, Tróia Júnior M, Mesquita MF, Dezan CC. Evaluation of low-fusing ceramic systems combined with titanium grades II and V by bending test and scanning electron microscopy. J Appl Oral Sci 2003; 11: 354-360.
22. Bondioli IR, Bottino MR. Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures. J Prosthet Dent 2004; 91: 541-547.
23. International Organization for Standardization. ISO 9693: Metal-ceramic dental restorative systems, Geneva, 1999, pp.1-14.
24. Riley EJ. Ceramo-metal restorations. Dent Clin North Am 1977; 21: 669-682.
25. Gilbert JL, Covey DA, Lautenschlager EP. Bond characteristics of porcelain fused to milled titanium. Dent Mater 1994; 10: 134-140.
26. Pang IC, Gilbert JL, Chai J, Lautenschlager EP. Bonding characteristic of low fusing porcelain bonded to pure titanium and palladium-copper alloy. J Prosthet Dent 1995; 73: 17-25.
27. White SN, Ho L, Caputo AA, Goo E. Strength of porcelain fused to titanium beams. J Prosthet Dent 1996; 75: 640-648.
28. Tróia Jr MG, Henriques GEP, Nóbilo MAA, Mesquita MF. The effect of thermal cycling on the bond strength of low-fusing porcelain to commercially pure titanium and titanium-aluminumvanadium alloy. Dent Mater 2003; 19: 790-796.
29. Suansuwan N, Swain MV. Adhesion of porcelain to titanium and a titanium alloy. J Dent 2003; 31: 509-518.
30. Suansuwan N, Swain MV. New approach for evaluating metal-porcelain interfacial bonding. Int J Prosthodont 1999; 12: 547-552.
31. Cai Z, Bunce N, Nunn ME, Okabe T. Porcelain adherence to dental cast CP titanium: effects of surface modifications. Biomater 2001; 22: 979-986.
32. Ida K, Togaya T, Tsutsumi S, Takeuchi M. Effect of magnesia investments in the dental casting of pure titanium or titanium alloys. Dent Mater J 1982; 1: 8-21.
33. Hung CC, Hou GL, Tsai CC, Huang CC. Pure titanium casting into zirconia-modified magnesia-based investment molds. Dent Mater 2004; 20: 846-851.
34. German Standard Institution. DIN 13.927 metal-ceramic system, Beuth, Berlin, 1990.
35. Kvam K, Derand T, Austrheim EK. Fracture toughness and flexural strength of dental ceramics for titanium. Biomaterials 1995; 16: 73-76.
36. Scherrer SS, Wiskott AH, Coto-Hunziker V, Belser UC. Monotonic flexure and fatigue strength of composites for provisional and definitive restorations. J Prosthet Dent 2003; 89: 579-588.
37. Teoh SH. Fatigue of biomaterials: a review. Int Biomat Fatigue 2000; 22: 825-837.
38. Morena R, Beaudreau GM, Lockwood PE, Evans AL, Fairhurst CW. Fatigue of dental ceramics in a simulated oral environment. J Dent Res 1986; 65: 993-997.
39. Taira M, Moser JB, Greener EH. Studies of Ti alloys for dental castings. Dent Mater 1989; 5: 45-50.
40. Özcan M, Pfeiffer P, Nergiz İ. A brief history and current status of metal/ceramic surface conditioning concepts for resin bonding in dentistry. Quintessence Int 1998; 29: 713-724.
41. Kim JY, Pfeiffer P, Niedermeier W. Effect of laboratory procedures and thermocycling on the shear bond strength of resin-metal bonding systems. J Prosthet Dent 2003; 90: 184-189.
42. Shimoe S, Tanoue N, Yanagida H, Atsuta M, Koizumi H, Matsumura H. Comparative strength of metal-ceramic and metal-composite bonds after extended thermocycling. J Oral Rehabil 2004; 31: 689-694.
43. Itinoche KM, Özcan M, Bottino MA, Oyafuso D. Effect of mechanical cycling on the flexural strength of densely sintered ceramics. Dent Mater 2006; 22: 1029-1034.
44. Gale MS, Darwell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999; 27: 89-99.
45. Leibrock A, Degenhart M, Behr M, Rosentritt M, Handel G. In vitro study of the effect of thermo- and load-cycling on the bond strength of porcelain repair systems. J Oral Rehabil 1999; 26: 130-137.