Effects of sandblasting and electrical discharge machining on porcelain adherence to cast and machined commercially pure titanium

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 78, Issue 2, 2006, Pages 393-400

  Inan, Özgür ^a   Acar, Asli ^a   Halkaci, Selçuk ^a  

^a SELCUK UNIVERSITY   (Turkey)

Author keywords

3 point bending test; Electrical discharge machining (EDM); Low fusing porcelain; Sandblasting; Titanium

Indexed keywords

ACRYLICS; ADHESION; NICKEL ALLOYS; POLYMERIZATION; PORCELAIN; RESINS; SCANNING ELECTRON MICROSCOPY; TITANIUM;

3-POINT BENDING TEST; ELECTRICAL DISCHARGE MACHINING (EDM); LOW-FUSING PORCELAIN; SANDBLASTING;

ELECTRIC DISCHARGES;

ACRYLIC ACID RESIN; CHROMIUM; NICKEL; TITANIUM;

ABRASIVE BLASTING; ADHESION; ARTICLE; BIOMECHANICS; BIOTECHNOLOGICAL PROCEDURES; CERAMICS; CHEMICAL BOND; ELECTRICAL DISCHARGE MACHINING; KRUSKAL WALLIS TEST; POLYMERIZATION; RANK SUM TEST; SCANNING ELECTRON MICROSCOPY; STRENGTH; SURFACE PROPERTY; THREE POINT BENDING TEST;

ACRYLIC RESINS; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; MICROSCOPY, ELECTRON, SCANNING; SURFACE PROPERTIES; TITANIUM;

EID: 33746681253     PISSN: 00219304     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.30500     Document Type: Article

References (49)

1. Hautaniemi JA, Hero H, Juhanoja JT. On the bonding of porcelain on titanium. J Mater Sci 1992;3:186-191.
2. Wang RR, Fenton A. Titanium for prosthodontics applications: A review of the literature. Quintessence Int 1996;27:401-408.
3. Zavanelli RA, Pessanha Henriques GE, Ferreira I, De Almeida Rollo JM. Corrosion-fatigue life of commercially pure titanium and Ti-6A1-4V alloys in different storage environments. J Prosthet Dent 2000;84:274-279.
4. Wang RR, Welsch GE, Monteiro O. Silicon nitride coating on titanium to enable titaniumceramic bonding. J Biomed Mater Res 1999;46:262-270.
5. Donachie MJ, editor. Titanium: A Technical Guide. Metals Park, OH: ASM International; 1988. p 28, 69, 71.
6. Bauccio ML. Technical note 9: Descaling and special surface treatments. In: Boyer R, Welsch G, Collings EW, editors. Materials Properties Handbook: Titanium Alloys. Materials Park, OH: ASM International; 1994. p 1145-1158.
7. Togaya T, Suzuki M, Tsutsumi S, Ida K. An application of pure titanium to the metal porcelain system. Dent Mater 1983;2:210-219.
8. Pang IC, Gilbert JL, Chai J, Lautenschlager EP. Bonding characteristics of low-fusing porcelain bonded to pure titanium and palladium-copper alloy. J Prosthet Dent 1995;73:17-25.
9. Pröbster L, Maiwald U, Weber H. Three-point bending strength of ceramics fused to cast titanium. Eur J Oral Sci 1996;104:313-319.
10. Kern M, Thompson VP. Effects of sandblasting and silica-coating procedures on pure titanium. J Dent 1994;22:300-306.
11. Reyes MJ, Oshida Y, Andres CJ, Barco T, Hovijitra S, Brown D. Titanium-porcelain system. Part III: Effects of surface modification on bond strengths. Biomed Mater Eng 2001;11:117-136.
12. Oshida Y, Hashem A. Titanium-porcelain system. Part I: Oxidation kinetics of nitrided pure titanium, simulated to porcelain firing process. Biomed Mater Eng 1993;3:185-198.
13. Wang RR, Fung KK. Oxidation behavior of surface-modified titanium for titaniumceramic restorations. J Prosthet Dent 1997;77:423-434.
14. Gilbert JL, Covey DA, Lautenschlager EP. Bond characteristics of porcelain fused to milled titanium. Dent Mater 1994;10:134-140.
15. Atsü S, Berksun S. Bond strength of three porcelains to two forms of titanium using two firing atmospheres. J Prosthet Dent 2000;84:567-574.
16. Sadeq A, Cai Z, Woody RD, Miller AW. Effects of interfacial variables on ceramic adherence to cast and machined commercially pure titanium. J Prosthet Dent 2003;90:10-17.
17. Böning K, Walter M. Ceramo-metallic bond of cast titanium. Dtsch Zahnärztl Z 1991;46:750-753.
18. Andersson M, Bergman B, Bessing C, Ericson G, Lundquist P, Nilson H. Clinical results with titanium crowns fabricated with machine duplication and spark erosion. Acta Odontol Scand 1989;47:279-286.
19. Dérand T, Herø H. Bond strength of porcelain on cast vs wrought titanium. Scand J Dent Res 1992;100:184-188.
20. Lautenschlager EP, Monaghan P. Titanium and titanium alloys as dental materials. Int Dent J 1993;43:245-253.
21. Miyakawa O, Watanabe K, Okawa S, Nakano S, Kobayashi M, Shiokawa N. Layered structure of cast titanium surface. Dent Mater J 1989;8:175-185.
22. Könönen M, Kivilahti J. Fusing of dental ceramics to titanium. J Dent Res 2001;80:848-854.
23. Van Roekel NB. Electrical discharge machining in dentistry. Int J Prosthodont 1992;5:114-121.
24. Van Roekel NB. Prosthesis fabrication using electrical discharge machining. Int J Oral Maxillofac Implants 1992;7:56-61.
25. Evans DB. Correcting the fit of implant-retained restorations by electric discharge machining. J Prosthet Dent 1997;77:212-215.
26. Miyazaki T, Kitamura M, Hotta Y, Lee G. Development of fabrication system of prostheses using electric discharge machining. Asian J Aesthet Dent 1993;1:71-79.
27. Rubeling G. Electroerosion in dental technology. Possibilities and limits. Dent Labor (Munch) 1982;30:1697-1702.
28. Contreras EFR, Henriques GEP, Giolo SR, Nobilo MAA. Fit of cast commercially pure titanium and Ti-6A1-4V alloy crowns before and after marginal refinement by electrical discharge machining. J Prosthet Dent 2002;88:467-472.
29. Bezzon OL, Pedrazzi H, Zaniquelli O, da Silva TB. Effect of casting technique on surface roughness and consequent mass loss after polishing of NiCr and CoCr base metal alloys: A comparative study with titanium. J Prosthet Dent 2004;92:274-277.
30. Dentale restaurative Metallkeramiksysteme (ISO 9693:1999); Deutsche Fassung EN ISO 9693:2000. German.
31. Cecconi BT, Koeppen RG, Phoenix RD, Cecconi ML. Casting titanium partial denture frameworks: A radiographic evaluation. J Prosthet Dent 2002;87:277-280.
32. Ramasawmy H, Blunt L, Rajurkar KP. Investigation of the relationship between the white layer thickness and 3D surface texture parameters in the die sinking EDM process. Precis Eng 2005;29:479-490.
33. Taira M, Moser JB, Greener EH. Studies of Ti alloys for dental castings. Dent Mater 1989;5:45-50.
34. Craig RG, editor. Ceramic-Metal System. Restorative Dental Materials, 10th ed. St. Louis: Mosby-Year Book; 1997. p 485.
35. Nielsen JP, Tuccillo JT. Calculation of interfacial stress in dental porcelain bonded to gold alloy substrate. J Dent Res 1972;51:1043-1047.
36. Fairhurst CW, Anusavice KJ, Hashinger DT, Ringle RD, Twiggs SW. Thermal expansion of dental alloys and porcelain. J Biomed Mater Res 1980;14:435-436.
37. Rosenstiel SF, Land MF, Fujimoto J. Contemporary Fixed Prosthodontics, 1st ed. St. Louis, MO: Mosby; 1988.
38. Yilmaz H, Dinčer C. Comparison of the bond compatibility of titanium and an NiCr alloy to dental porcelain. J Dent 1999;27:215-222.
39. Phillips RW. Skinner's Science Of Dental Materials, 9th ed. Philadelphia: WB Saunders; 1991. p 31.
40. Tiller HJ, Magnus B, Göbel R, Musil R, Garschke A. Der Sandstrahlprozeβ und seine Einwirkung auf den Oberflächenzustand von Dentallegierungen (I). Quintessenza 1985;36:1927-1934.
41. Tiller HJ, Göbel R, Magnus B, Musil R, Garschke A, Lockowandt P, Oden A. Der Sandstrahlprozeß und seine Einwirkung auf den Oberflächenzustand von Dentallegierungen (II). Quintessenza 1985;36:2151-2158.
42. Cai Z, Bunce N, Nunn ME, Okabe T. Porcelain adherence to dental cast CP titanium: Effects of surface modifications. Biomaterials 2001;22:979-986.
43. VITA TITANKERAMIK working instructions. Vita Zahnfabrik, H. Rauter GmbH & Co. KG, Bad Säckingen, Germany. Available at http://www. vitazahnfabrik.com/resourcesvita/shop/en/en 3050350.pdf.
44. Schmitt SM, Chance DA. Fabrication of titanium implant-retained restorations with nontraditional machining techniques. Int J Prosthodont 1995;8:332-336.
45. Tomlinson WJ, Adkin JR. Microstructure and properties of electro discharge machined surfaces. Surf Eng 1992;8:283-288.
46. Lee HT, Tai TY. Relationship between EDM parameters and surface crack formation. J Mater Process Technol 2003;142:676-683.
47. Tróia MG Jr, Henriques GEP, Nóbilo MAA, Mesquita MF. The effect of thermal cycling on the bond strength of low-fusing porcelain to commercially pure titanium and titanium aluminium-vanadium alloy. Dent Mater 2003;19:790-796.
48. O'Brien WJ. Cohesive plateau theory of porcelain-alloy bonding. Conference Proceedings, University of Southern California. Dental Porcelain-State of the Art, 1977.
49. Suansuwan N, Swain MV. Adhesion of porcelain to titanium and a titanium alloy. J Dent 2003;31:509-518.