Effects of airborne-particle abrasion, sodium hydroxide anodization, and electrical discharge machining on porcelain adherence to cast commercially pure titanium

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 82, Issue 1, 2007, Pages 267-274

  Acar, Asli ^a   Inan, Özgür ^a   Halkaci, Selçuk ^a  

^a SELCUK UNIVERSITY   (Turkey)

Author keywords

Airborne particle abrasion; Electrical discharge machining; Sodium hydroxide anodization; Titanium; Titanium porcelain

Indexed keywords

ADHESION; ANODIC OXIDATION; CASTING; ELECTRIC DISCHARGES; PORCELAIN; PROFILOMETRY; TITANIUM;

AIRBORNE-PARTICLE ABRASION; ELECTRICAL DISCHARGE MACHINING; SODIUM HYDROXIDE ANODIZATION; TITANIUM PORCELAIN;

SODIUM COMPOUNDS;

CHROMIUM; NICKEL; SODIUM HYDROXIDE; TITANIUM;

ABRASION; ADHESION; AIRBORNE PARTICLE; ARTICLE; ELECTRICITY; METAL BINDING; SCANNING ELECTRON MICROSCOPE; STATISTICAL ANALYSIS; SURFACE PROPERTY;

CHROMIUM ALLOYS; DENTAL ALLOYS; DENTAL PORCELAIN; ELECTRICITY; METAL CERAMIC ALLOYS; MICROSCOPY, ELECTRON, SCANNING; SODIUM HYDROXIDE; SURFACE PROPERTIES; TITANIUM;

EID: 34347366147     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.30730     Document Type: Article

References (40)

1. Adachi M, Mackert JR Jr, Parry EE, Fairhurst CW. Oxide adherence and porcelain bonding to titanium and Ti-6A1-4V alloy. J Dent Res 1990;69:1230-1235.
2. Dérand T, Herø H. Bond strength of porcelain on cast vs. wrought titanium. Scand J Dent Res 1992;100:184-188.
3. Pang IC, Gilbert JL, Chai J, Lautenschlager EP. Bonding characteristics of low-fusing porcelain bonded to pure titanium and palladium-copper alloy. J Prosthet Dent 1995;73:17-25.
4. Atsü S, Berksun S. Bond strength of three porcelains to two forms of titanium using two firing atmospheres. J Prosthet Dent 2000;84:567-574.
5. İnan Ö, Acar A, Halkaci S. Effects of sandblasting and EDM on porcelain adherence to cast and machined commercially pure titanium. J Biomed Mater Res B Appl Biomater 2006;78:393-400.
6. Craig RG. Ceramic-metal system. In: Craig RG, editor. Restorative Dental Materials, 10th ed. St. Louis: Mosby-Year Book; 1997. p 485.
7. Kern M, Thompson VP. Effects of sandblasting and silica-coating procedures on pure titanium. J Dent 1994;22:300-306.
8. Yilmaz H, Dinçer C. Comparison of the bond compatibility of titanium and an NiCr alloy to dental porcelain. J Dent 1999;27:215-222.
9. Hussaini IA, Wazzan KAA. Effect of surface treatment on bond strength of low-fusing porcelain to commercially pure titanium. J Prosthet Dent 2005;94:350-356.
10. Cai Z, Bunce N, Nunn ME, Okabe T. Porcelain adherence to dental cast CP titanium: Effects of surface modifications. Biomaterials 2001;22:979-986.
11. Wang RR, Welsch GE, Monteiro O. Silicon nitride coating on titanium to enable titaniumceramic bonding. J Biomed Mater Res 1999;46:262-270.
12. Oshida Y, Hashem A. Titanium-porcelain system. Part I: Oxidation kinetics of nitrided pure titanium, simulated to porcelain firing process. Biomed Mater Eng 1993;3:185-198.
13. Wang RR, Fung KK. Oxidation behavior of surface-modified titanium for titaniumceramic restorations. J Prosthet Dent 1997;77:423-434.
14. Sadeq A, Cai Z, Woody RD, Miller AW. Effects of interfacial variables on ceramic adherence to cast and machined commercially pure titanium. J Prosthet Dent 2003;90:10-17.
15. Gilbert JL, Covey DA, Lautenschlager EP. Bond characteristics of porcelain fused to milled titanium. Dent Mater 1994;10:134-140.
16. Kern M, Thompson VP. Sandblasting and silica-coating of dental alloys: Volume loss, morphology and chances in the surface composition. Dent Mater 1993;9:155-161.
17. Son W, Zhu X, Shin H, Ong JL, Kim K. In Vivo histological response to anodized and anodized/hydrothermally treated titanium implants. J Biomed Mater Res B Appl Biomater 2003;66:520-525.
18. Suh JY, Jang BC, Zhu X, Ong JL, Kim KH. Effect of hydrothermally treated anodic oxide films on osteoblast attach and proliferation. Biomaterials 2003;24:347-355.
19. Molitor P, Baron V, Young T. Surface treatment of titanium for adhesive bonding to polymer composites: A review. Int J Adhes Adhesives 2001;21:129-136.
20. Van Roekel NB. Electrical discharge machining in dentistry. Int J Prosthodont 1992;5:114-121.
21. Evans DB. Correcting the fit of implant-retained restorations by electric discharge machining. J Prosthet Dent 1997;77:212-215.
22. Tomlinson WJ, Adkin JR. Microstructure and properties of electro discharge machined surfaces. J Surf Eng 1992;8:283-288.
23. Lee HT, Tai TY. Relationship between EDM parameters and surface crack formation. J Mater Process Technol 2003;142:676-683.
24. Ramasawmy H, Blunt L, Rajurkar KP. Investigation of the relationship between the white layer thickness and 3D surface texture parameters in the die sinking EDM process. Precis Eng 2005;29:479-490.
25. Pröbster L, Maiwald U, Weber H. Three-point bending strength of ceramics fused to cast titanium. Eur J Oral Sci 1996;104:313-319.
26. International Organization for Standardization. Metal-ceramic dental restorative systems. Geneva, Switzerland. ISO 9693:1999 (E). (accessed January 18, 2006).
27. Massaro C, Rotolo P, De Riccardis F, Milella E, Napoli A, Wieland M, Textor M, Spencer ND, Brunette DM. Comparative investigation of the surface properties of commercial titanium dental implants. Part I: Chemical composition. J Mater Sci Mater Med 2002;13:535-548.
28. Derrien G, Le Menn G. Evaluation of detail reproduction for three die materials by using scanning electron microscopy and two-dimensional profilometry. J Prosthet Dent 1995;74:1-7.
29. Fleming GJP, Jandu HS, Nolan L, Shaini FJ. The influence of alumina abrasion and cement lute on the strength of a porcelain laminate veneering material. J Dent 2004;32:67-74.
30. Wen X, Wang X, Zhang N. Microrough surface of metallic biomaterials: A literature review. Biomed Mater Eng 1996;6:173-189.
31. Nergiz I, Schmage P, Herrmann W, Mutlu Ö. Effect of alloy type and surface conditioning on roughness and bond strength of metal brackets. Am J Orthod Dentofacial Orthop 2004;125, 42-50.
32. Jang KS, Youn SJ, Kim YS. Comparison of castability and surface roughness of commercially pure titanium and cobalt-chromium denture frameworks. J Prosthet Dent 2001;86:93-98.
33. Ardlin BI. Transformation-toughened zirconia for dental inlays, crowns and bridges: Chemical stability and effect of low-temperature aging on flexural strength and surface structure. Dent Mater 2002;18:590-595.
34. Wright MD, Masri R, Driscoll CF, Romberg E, Thompson GA, Runyan DA. Comparison of three systems for the polishing of an ultra-low fusing dental porcelain. J Prosthet Dent 2004;92:486-490.
35. Guilherme AS, Henriques GEP, Zavanelli RA, Mesquita MF. Surface roughness and fatigue performance of commercially pure titanium and Ti-6A1-4V alloy after different polishing protocols. J Prosthet Dent 2005;93:378-385.
36. Tróia MG Jr, Henriques GEP, Nóbilo MAA, Mesquita MF. The effect of thermal cycling on the bond strength of low-fusing porcelain to commercially pure titanium and titanium aluminium-vanadium alloy. Dent Mater 2003;19:790-796.
37. Cecconi BT, Koeppen RG, Phoenix RD, Cecconi ML. Casting titanium partial denture frameworks: A radiographic evaluation. J Prosthet Dent 2002;87:277-280.
38. Ingram C, Ramani K. The effect of sodium hydroxide anodization on the durability of poly(etherketonetherketoneketone) adhesive bonding of titanium. Int J Adhes Adhesives 1997;17: 39-45.
39. Keskin Y, Halkaci HS, Kizil M. An experimental study for determination of the effects of machining parameters on surface roughness in electrical discharge machining (EDM). Int J Adv Manuf Technol 2006;28:1118-1121.
40. O'Brien WJ. Dental materials and their selection. In: O'Brien WJ, editor. Dental Porcelain, 2nd ed. Chicago: Quintessence; 1997. p 291.