Specialized fabrication processes: Rapid prototyping

Biomedical Materials

Volumn , Issue , 2009, Pages 493-523

  Chua, C K ^a   Leong, K F ^a   Tan, K H ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 71449100912     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-0-387-84872-3_18     Document Type: Chapter

References (104)

1. Chua CK, Leong KF, and Lim CS. Rapid Prototyping - Principles and Applications, 2nd edn, World Scientific: Singapore, 2003.
2. Bell E. Tissue engineering in perspective, in Lanza RP, Langer RS, and Vacanti JP, eds. Principles of Tissue Engineering, 2nd edn, Academic Press: San Diego, 2000.
3. Mooney, DJ and Mikos AG. Growing New Organs, Scientific American, April, 1999.
4. Patrick C W Jr, Mikos AG, and Mcintire LV. Prospectus of tissue engineering, in Patrick CW Jr, Mikos AG and Mcintire LV, eds. Frontiers in Tissue Engineering, Pergamon, New York, 1998, pp. 1-11.
5. Thomson RC, Wake MC, Yaszemski MJ, and Mikos AG. Biodegradable polymer scaffolds to regenerate organs. Adv Polym Sci, 1995, 122:245-274.
6. United Network for Organ Sharing Website: http://www.unos.org, 2004.
7. Scientific Registry of Transplant Recipients. Annual Report of the U. S. Scientific Registry for Organ Transplantation and the Organ Procurement and Transplant Network, Richmond, VA, 2000.
8. Whang K, Healy KE, Elenz DR, Nam EK, Tsai DC, Thomas CH, Nuber GW, Glorieux FH, Travers R, and Sprague SM. Engineering bone regeneration with bioresorbable scaffolds with novel microarchitecture. Tissue Eng, 1999, 5:35-51.
9. Kim WS, Vacanti JP, Cima L, Mooney D, Upton J, Puelacher WC, and Vacanti CA. Cartilage engineered in predetermined shapes employing cell transplantation on biodegradable polymers. Plast Reconst Surg, 1994, 94:233-237.
10. Davies MW and Vacanti JP. Toward development of an implantable tissue engineered liver. Biomaterials, 1996, 17:365-372.
11. Niklason LE, Gao J, Abbott WM, Hirschi K, Houser S, Marini R, and Langer R. Functional arteries grown in vitro. Science, 1999, 284:489-493.
12. Karmiol S. Cell isolation and selection, in Atala A. and Lanza RP, eds. Methods of Tissue Engineering, Academic Press: San Diego, 2002, pp. 19-36.
13. Freed LE, Hollander AP, Martin I, Barry JR, Langer R, and Vunjak-Novakovic G. Chondrogenesis in a cell-polymer-bioreactor system. Exp Cell Res, 1998, 240:58-65.
14. Freed LE, Vunjak-Novakovic G, and Langer R. Cultivation of cell-polymer cartilage implants in a bioreactor. J Cell Biochem, 1993, 51:257-264.
15. Weinberg CB and Bell E. A blood vessel model constructed from collagen and cultured vascular cells. Science, 1986, 231:397-400.
16. Madihally SV and Matthew H W T. Porous chitosan scaffolds for tissue engineering. Biomaterials, 1999, 20:1133-1142.
17. Mikos AG and Temenoff JS. Formation of highly porous biodegradable scaffolds for tissue engineering. J Biotechnol, 2000, 3:114-119.
18. Temenoff JS and Mikos AG. Review: tissue engineering for regeneration of articular cartilage. Biomaterials, 2000, 21:431-440.
19. Mooney DJ and Vacanti JP. Tissue engineering using cells and synthetic polymers. Transplant Rev, 1993, 7:153-162.
20. Cima LG, Vacanti JP, Vacanti C, Ingber DE, Mooney D, and Langer R. Tissue engineering by cell transplantation using degradable polymer substrates. J Biomed Eng, 1991, 113:143.
21. Cima LG, Langer R, and Vacanti JP. Polymers for tissue and organ culture. J Bioac Compat Polym, 1991, 6:232-240.
22. Cornell CN. Osteoconductive materials and their role as substitutes for autogeneous bone grafts. Orthop Clin North Am, 1999, 30:591-598.
23. Beruto DT, Mezzasalma SA, Capurro M, Botter R, and Cirillo P. Use of á-tricalcium phosphate (TCP) as powders and as an aqueous dispersion to modify processing, microstructure, and mechanical properties of poly-methylmethacrylate (PMMA) bone cements and to produce bone-substitute compounds. J Biomed Mater Res, 2000, 49:498-505.
24. Liu X and Ma PX, Polymeric scaffolds for bone tissue engineering, Ann Biomed Eng, 2004, 32:477-486.
25. Ingber DE. Mechanical and chemical determinants of tissue development, in Lanza RP, Langer RS, and Vacanti JP, eds. Principles of Tissue Engineering, 2nd edn, Academic Press: San Diego, 2000, pp. 101-110.
26. Mooney DJ, Cima LG, Langer R, Johnson L, Hansen LK, Ingber DE, and Vacanti JP. Principles of tissue engineering and reconstruction using polymer-cell constructs. Mater Res Soc Symp Proc, 1992, 252:345.
27. Chen CS, Mrksich M, Huang S, Whitesides GM, and Ingber DE. Geometric control of cell life and death. Science, 1997, 276:1425-1428.
28. McClary KB, Ugarova T, and Grainger DW. Modulating fibroblast adhesion, spreading and proliferation using self-assembled monolayer films of alkylthiolates on gold. J Biomed Mater Res, 2000, 50:428-439.
29. Freed LE, Vunjak-Novakovic G, Biron RJ, Eagles DB, Lesnoy DC, Barlow SK, and Langer R. Biodegradable polymer scaffolds for tissue engineering. Biotechnology, 1994, 12:689-693.
30. Freed LE, Grande DA, Lingbin Z, Emmanual J, Marquis JC, and Langer R. Joint resurfacing using allograft chondrocytes and synthetic biodegradable polymer scaffolds. J BiomedMater Res, 1994, 28:891-899.
31. Mikos AG, Sarakinos G, Lyman MD, Ingber DE, Vacanti JP, and Langer R. Prevascularization of porous biodegradable polymers. Biotechnol Bioeng, 1993, 42:716-723.
32. Wake MC, Patrick CW Jr, and Mikos AG. Pore morphology effects on the fibrovascular tissue growth in porous polymer substrates. Cell Transplant, 1994, 3:339-343.
33. Rout P G J, Tarrant SF, Frame JW, and Davies JE. Interaction between primary bone cell cultures and biomaterials. Part 3: A comparison of dense and macroporous hydroxyapatite, in Pizzoferratto A, Ravaglioli PG, and Lee AJC, eds. Bioceramics and Clinical Applications, Elsevier: Amsterdam, 1988, pp. 591-596.
34. Yang SF, Leong KF, Du ZH, and Chua CK. The design of scaffolds for use in tissue engineering: Part 1-Traditional factors. Tissue Eng, 2001, 7:679-690.
35. Thomson RC, Shung AK, Yaszemski MJ, and Mikos AG. Polymer scaffold processing, in Lanza RP, Langer R, and Vacanti J, eds. Principles of Tissue Engineering, 2nd edn, Academic Press: San Diego:, 2000, pp. 251-262.
36. Widmer MS and Mikos AG. Fabrication of biodegradable polymer scaffolds for tissue engineering, in Patrick CWJr, Mikos AG, and McIntire LV, eds,. Frontiers in Tissue Engineering, Elsevier Sciences: New York, 1998, pp. 107-120.
37. Lu L and Mikos AG. The importance of new processing techniques in tissue engineering, MRS Bull, 1996, 21:28-32.
38. Mikos AG, Bao Y, Cima LG, Ingber DE, Vacanti JP, and Langer R. Preparation of poly (glycolic acid) bonded fiber structures for cell attachment and transplantation. J Biomed Mater Res, 1993, 27:183-189.
39. Lo H, Ponticiello MS, and Leong KW. Fabrication of controlled release biodegradable foams by phase separation. Tissue Eng, 1995, 1:15-28.
40. Nam YS and Park TG. Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation. Biomaterials, 1999, 20:1783-1790.
41. Mikos AG, Thorsen AJ, Czerwonka LA, Bao Y, Langer R, Winslow DN, and Vacanti JP. Preparation and characterization of poly (L-lactic acid) foams. Polymer, 1994, 35:1068-1077.
42. Mikos AG, Sarakinos G, Leite SM, Vacanti JP, and Langer R. Laminated three-dimensional biodegradable foams for use in tissue engineering. Biomaterials, 1993, 14:323-330.
43. Mikos AG, Sarakinos G, Vacanti JP, Langer RS, and Cima LG. Biocompatible polymer membranes and methods of preparation of three-dimensional membrane structures. US Patent 5, 514, 378, 1996.
44. Thomson RC, Yaszemski MJ, Power JM, and Mikos AG. Fabrication of biodegradable polymer scaffolds to engineer trabecular bone. J Biomater Sci Polym Ed, 1995, 7:23-38.
45. Mooney DJ, Baldwin DF, Suh NP, Vacanti JP, and Langer R. Novel approach to fabricate porous sponges of poly (D, L-lactic-co-glycolic acid) without the use of organic solvents, Biomaterials, 1996, 17:1417-1422.
46. Baldwin DF, Shimbo M, and Suh NP. The role of gas dissolution and induced crystallization during microcellular polymer processing: a study of poly (ethylene terephthalate) and carbon dioxide systems. J Eng Mater Technol, 1995, 117:62.
47. Shastri VP, Martin I, and Langer R. Macroporous polymer foams by hydrocarbon templating. Proc Natl Acad Sci U S A, 2000, 97:1970-1975.
48. Whang K, Thomas CK, Nuber G, and Healy KE. A novel method to fabricate bioabsorbable scaffolds. Polymer, 1995, 36:837-842.
49. Healy KE, Whang K, and Thomas CH. Method of fabricating emulsion freeze-dried scaffold bodies and resulting products. U. S., Patent 5, 723, 508, 1998.
50. Harris LD, Kim BS, and Mooney DJ. Open pore biodegradable matrices formed with gas foaming. J Biomed Mater Res, 1998, 42:396-402.
51. Yang SF, Leong KF, Du ZH, and Chua CK. The design of scaffolds for use in tissue engineering: Part 2-Rapid prototyping techniques. Tissue Eng, 2002, 8:1-12.
52. Ang TH, Sultana F S A, Hutmacher DW, Wong YS, Fuh J Y H, Mo XM, Loh HT, Burdet E, and Teoh SH. Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispensing system. Mater Sci Eng C, 2002, 20:35-42.
53. Fisher JP, Vehof J W M, Dean D, Van der Waerden, J P C M, Holland TA, Mikos AG, and Jansen JA. Soft and hard tissue response to photocrosslinked poly (propylene fumarate) scaffolds in a rabbit model. J Biomed Mater Res, 2002, 59:547-556.
54. Lam C X F, Mo XM, Teoh SH, and Hutmacher DW. Scaffold development using 3D printing with a starch-based polymer. Mater Sci Eng C, 2002, 20:49-56.
55. Too MH, Leong KF, Chua CK, Du ZH, Yang SF, Cheah CM, and Ho SL. Investigation of 3D non-random porous structures by fused deposition modeling. Int J Adv Manuf Technol, 2002, 19:217-223.
56. Zein I, Hutmacher DW, Tan KC, Teoh SH. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials, 2002, 23:1169-1185.
57. Hollister SJ, Maddox RD, and Taboas JM. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials, 2002, 23:4095-4103.
58. Chu T-M, Halloran JW, Hollister SJ, and Feinberg SE. Hydroxyapatite implants with designed internal architecture. J Mater Sci Mater Med, 2001, 12:471-478.
59. Hutmacher DW, Schantz T, Zein I, Ng KW, Teoh SH, and Tan KC. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. J Biomed Mater Res, 2001, 55:203-216.
60. Xiong Z, Yan YN, Zhang RJ, and Sun L. Fabrication of porous (L-lactic acid) scaffolds for bone tissue engineering via precise extrusion. Scripta Materialia, 2001, 45:773-779.
61. Zeltinger J, Sheerwood JK, Graham DM, Mueller R, and Griffith LG. Effects of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. Tissue Eng, 2001, 7:557-572.
62. Cornejo IA, McNulty TF, Lee S, Bianchi E, Danforth SC, and Safari A. Development of bioceramic tissue scaffolds via fused deposition of ceramics, in George L, ed., Bioceramics: Materials and Applications III, American Ceramic Society: Westerville, 2000, pp. 183-195.
63. Hollister SJ, Levy RA, Chu T-M, Halloran JW, and Feinberg SE. An image-based approach for designing and manufacturing craniofacial scaffolds. Int J Oral Maxillofac Surg, 2000, 29:67-71.
64. Hutmacher DW. Scaffolds in tissue engineering bone and cartilage. Biomaterials, 2000, 21:2529-2543.
65. Hattiangadi A and Bandyopadhyay A. Processing, characterization and modeling of nonrandom porous ceramic structures, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, 1999, pp. 319-326.
66. Steidle C, Klosterman D, Chartoff R, Graves G, and Osborne N, Automated Fabrication of Custom Bone Implants Using Rapid Prototyping, Proceedings of the 44th International SAMPE Symposium and Exhibition, Long Beach, CA, May, 1999.
67. Bose S, Avila M, and Bandyopadhyay A. Processing of bioceramic implants via fused deposition process. Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, 1998, pp. 629-636.
68. Danforth SC, Safari A, and Langrana N. Solid freeform fabrication of functional advanced ceramic components. Naval Research Reviews, 1998, 1:27.
69. Kim SS, Utsunomiya H, Koski JA, Wu BM, Cima MJ, Sohn J, Mukai K, Griffith LG, and Vacanti JP. Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels, Ann Surg, 1998, 228:8-13.
70. Park A, Wu B, and Griffith LG. Integration of surface modification and 3D fabrication techniques to prepare patterned poly (L-lactide) substrates allowing regionally selective cell adhesion. J Biomater Sci Polym Ed, 1998, 9:89-110.
71. Giordano RA, Wu BM, Borland SW, Cima LG, Sachs EM, and Cima MJ. Mechanical properties of dense polylactic acid structures fabricated by three-dimensional printing. J Biomater Sci Polym Ed, 1996, 8:63-73.
72. Xiong Z, Yan Y, Wang S, Zhang R, and Zhang C. Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition. Scripta Materialia, 2002, 46:771-776.
73. Bose S, Darsell J, Hosick HL, Yang L, Sarkar DK, and Bandyopadhyay A. Processing and characterization of porous alumina scaffolds. J Mater Sci Mater Med, 2002, 13:23-28.
74. Limpanuphap S and Derby B. Manufacture of biomaterials by novel printing process. J Mater Sci: Mater Med, 2002, 13:1163-1166.
75. Taboas JM, Maddox RD, Krebsbach PH, and Hollister SJ. Indirect solid free form fabrication of local and global porous biomimetic and composite 3D polymer-ceramic scaffolds. Biomaterials, 2003, 24:181-194.
76. Sachlos E, Reis N, Ainsley C, Derby B, and Czernuszka JT. Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication. Biomaterials, 2003, 24:1487-1497.
77. Wilson W C J and Boland T. Cell and organ printing 1: protein and cell printers. Anat Rec A, 2003, 272 A: 491-496.
78. Boland T, Mironov V, Gutowska A, Roth EA, and Markwald RR. Cell and organ printing 2: Fusion of cell aggregates in three-dimensional gels. Anat Rec A, 2003, 272 A: 497-502.
79. Mironov V, Boland T, Trusk T, Forgacs G, and Markwald RR. Organ printing: computeraided jet-based 3D tissue engineering. Trends Biotechnol, 2003, 21:157-161.
80. Lee GH and Barlow JW. Selective laser sintering of calcium phosphate powders. Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, 1994, pp. 191-197.
81. Lee GH and Barlow JW. Selective laser sintering of bioceramic materials for implants. Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, 1993, pp. 376-380.
82. Tan KH, Chua CK, Leong KF, Cheah CM, Cheang P, Abu Bakar MS, and Cha SW. Scaffold development using selective laser sintering of polyetheretherketone- hydroxyapatite biocomposite blends. Biomaterials, 2003, 24:3115-3123.
83. Tan KH, Chua CK, Leong KF, Cheah CM, Gui WS, Tan WS, and Wiria FE. Selective laser sintering of biocompatible polymers for applications in tissue engineering, BioMedical Materials and Engineering, United States, 2005, Vol 15(1-2), pp 113-124.
84. Brady GA and Halloran JW. Stereolithography of Ceramic Suspensions. Rapid Prototyping J, 1997, 3:61-65.
85. Hinczewski C, Corbel S, and Chartier T. Stereolithography for the fabrication of ceramic three-dimensional parts. Rapid Prototyping J, 1998, 4:104-111.
86. Brady GA, Chu TM, and Halloran JW. Curing behavior of ceramic resin for stereolithography. Proceedings of Solid Freeform Fabrication Symposium, Austin TX August 12-14, 1996, pp. 403-410.
87. Himmer, T, Nakagawa T, and Noguchi H. Stereolithography of ceramics. Proceedings of Solid Freeform Fabrication Symposium, Austin TX August 11-13th, 1997, pp. 363-369.
88. Chu T M G, Halloran JW, Hollister SJ, and Feinberg SE. Hydroxyapatite implants with designed internal architecture. J Mater Sci: Mater Med, 2001, 12:471-478.
89. Chu T M G, Orton DG, Hollister SJ, Feinberg SE, and Halloran JW. Mechanical and in-vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials, 2002, 23:1283-1293.
90. Hollister SJ, Levy RA, Chu TM, Halloran JW, and Feinberg SE. An image-based approach for designing and manufacturing craniofacial scaffolds. Int J Oral Maxillofac Surg, 2000, 29:67-71.
91. Fisher JP, Vehof J W M, Dean D, Waerden J P C, Holland TA, Mikos AG, and Jansen JA. Soft and hard tissue response to photocrosslinked poly (propylene fumarate) scaffolds in a rabbit model. J Biomed Mater Res, 2002, 59:547-556.
92. Zhang W, Leu MC, Ji Z, and Yan Y. Rapid freezing prototyping with water. Proceedings of Solid Freeform Fabrication Symposium, Austin TX August 9-11, 1998, pp. 185-192.
93. Sui G, Zhang W, and Leu MC. Study on water deposit in rapid freeze prototyping process. Proceedings of Solid Freeform Fabrication Symposium, Austin TX August 7-9, 2000, pp. 342-349.
94. Zhang W, Leu MC, Feng C, Ren R, Zhang R, Lu Q, Jiang J, and Yan Y. Investment casting with ice patterns made by rapid freeze prototyping. Proceedings of Solid Freeform Fabrication Symposium, Austin TX August 7-9, 2000, pp. 66-72.
95. Feng C. Study of rapid ice prototype forming, PhD Thesis, Tsinghua University, Beijing, China, 2001.
96. Chua CK, Leong KF, Cheah CM, and Chua SW. Development of a tissue engineering scaffold structure library for rapid prototyping: Part 1. Investigation and classification. Int J Adv Manuf Technol, 2003, 21:291-301.
97. Chua CK, Leong KF, Cheah CM, and Chua SW. Development of a tissue engineering scaffold structure library for rapid prototyping: Part 2. Parametric library and assembly algorithm. Int J Adv Manuf Technol, 2003, 21:302-312.
98. Cheah CM, Chua CK, Leong KF, Cheong CH, and Naing MW. An automatic algorithm for generating complex polyhedral scaffolds structures for tissue engineering. Tissue Eng, 2004, 10:595-610.
99. Chua CK, Chou SM, Lin SC, Lee ST, and Saw CA. Facial prosthetic model fabrication using rapid prototyping tools. Int J Manuf Technol Manag, 2000, 11:42-53.
100. Chua CK, Chou SM, Ng WS, Chow KY, Lee ST, Aung SC, and Seah CS. An integrated experimental approach to link a laser digitiser, a CAD/CAM system and a rapid prototyping system for biomedical applications. Int J Adv Manuf Technol, 1998, 14:110-115.
101. Cheah CM, Chua CK, Tan KH, and Teo CK. Integration of laser surface digitising with computer-aided design and manufacturing techniques for developing facial prostheses-Part 1: Direct rapid prototyping techniques. Int J Prosthodont, 2003, 16:435-441.
102. Cheah CM, Chua CK, and Tan KH. Integration of laser surface digitising with computeraided design and manufacturing techniques for developing facial prostheses-Part 2: Indirect rapid prototyping and tooling techniques. Int J Prosthodont, 2003, 16:541-546.
103. Whitaker LA. Facial implants. Plast Surg, 1992, 1:439-440.
104. Guerrerosantos J. Frontalis musculocutaneous island flap for coverage of forehead defect. J Am Soc Plast Surg, 2000, 106:18-21.