Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds

Biomaterials

Volumn 24, Issue 1, 2003, Pages 181-194

  Taboas, J M ^b   Maddox, R D ^b   Krebsbach, P H ^a,b   Hollister, S J ^a,c  

^a UNIVERSITY OF MICHIGAN   (United States)

^b UNIVERSITY OF MICHIGAN SCHOOL OF DENTISTRY   (United States)

^c UNIVERSITY OF MICHIGAN MEDICAL SCHOOL   (United States)

Author keywords

Biomimetic; Ceramic; Composites; Free from fabrication; Polymer; Scaffolds

Indexed keywords

BIOMIMETIC MATERIALS; CASTING; CERAMIC MATERIALS; COMPOSITE MATERIALS; FABRICATION; LEACHING; PHASE SEPARATION; POROSITY; SCAFFOLDS;

TISSUE ENGINEERING;

BIOMATERIALS;

BIOMATERIAL; HYDROXYAPATITE; POLYGLYCOLIDE; POLYLACTIDE; POLYMER; SOLVENT; POLYESTER; POLYLACTOSAMINO PROTEOGLYCAN; POLYLACTOSAMINO-PROTEOGLYCAN; POLYSACCHARIDE; PROTEOGLYCAN;

ARCHITECTURE; ARTICLE; BIOCOMPATIBILITY; BIOMIMETICS; BONE STRUCTURE; CERAMICS; COMPOSITE MATERIAL; DIFFUSION; EMULSION; GEOMETRY; LEACHING; METHODOLOGY; PARTICLE SIZE; POROSITY; PRIORITY JOURNAL; PROCESSING; SEPARATION TECHNIQUE; SOLID; TISSUE ENGINEERING; TRABECULAR BONE; BIOMECHANICS; CHEMISTRY; IN VITRO STUDY; INSTRUMENTATION; MATERIALS TESTING; MOLECULAR MIMICRY;

BIOMECHANICS; CERAMICS; MATERIALS TESTING; MOLECULAR MIMICRY; POLYESTERS; POLYSACCHARIDES; PROTEOGLYCANS; TISSUE ENGINEERING;

EID: 0037210053     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0142-9612(02)00276-4     Document Type: Article

References (100)

1. Hui P.W., Leung P.C., Sher A. Fluid conductance of cancellous bone graft as a predictor for graft-host interface healing. J Biomech. 29(1):1996;123-132.
2. Kuboki Y., Takita H., Kobayashi D., Tsuruga E., Inoue M., Murata M., Nagai N., Dohi Y., Ohgushi H. BMP-induced osteogenesis on the surface of hydroxyapatite with geometrically feasible and non-feasible structures. topology of osteogenesis J Biomed Mater Res. 39(2):1998;190-199.
3. Blokhuis T.J.M.D., Termaat M.F.M.D., den Boer F.C.M.D., Patka P.M.D.P., Bakker F.C.M.D.P., Haarman H.J.T.M.M.D.P. Properties of calcium phosphate ceramics in relation to their in vivo behavior. J Traum Inj Inf Crit Care. 48(1):2000;179.
4. Zeltinger J., Sherwood J.K., Graham D.A., Mueller R., Griffith L.G. Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. Tissue Eng. 7(5):2001;557-572.
5. Freyman T.M., Yannas I.V., Gibson L.J. Cellular materials as porous scaffolds for tissue engineering. Prog Mater Sci. 46(3-4):2001;273-282.
6. Cima L.G., Vacanti J.P., Vacanti C., Ingber D., Mooney D., Langer R. Tissue engineering by cell transplantation using degradable polymer substrates. J Biomech Eng ASME. 113(2):1991;143-151.
7. Holmes R.E., Bucholz R.W., Mooney V. Porous hydroxyapatite as a bone-graft substitute in metaphyseal defects - a histometric study. J Bone Jt Surg Am Vol. 68A(6):1986;904-911.
8. Gauthier O., Bouler J.M., Aguado E., Pilet P., Daculsi G. Macroporous biphasic calcium phosphate ceramics. influence of macropore diameter and macroporosity percentage on bone ingrowth Biomaterials. 19(1-3):1998;133-139.
9. Shors E.C. Coralline bone graft substitutes. Orthop Clin North Am. 30(4):1999;599-613.
10. Tsuruga E., Takita H., Itoh H., Wakisaka Y., Kuboki Y. Pore size of porous hydroxyapatite as the cell-substratum controls BMP-induced osteogenesis. J Biochem. 121(2):1997;317-324.
11. Le Huec J., Schaevereke T., Clement D., Faber J., Le Rebeller A. Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress. Biomaterials. 16(2):1995;113-118.
12. Martin R.B., Chapman M.W., Sharkey N.A., Zissimos S.L., Bay B., Shors E.C. Bone ingrowth and mechanical-properties of coralline hydroxyapatite 1 yr after implantation. Biomaterials. 14(5):1993;341-348.
13. Coombes A.G.A., Heckman J.D. Gel casting of resorbable polymers 0.1. Processing and applications. Biomaterials. 13(4):1992;217-224.
14. Thomson R.C., Yaszemski M.J., Powers J.M., Mikos A.G. Fabrication of biodegradable polymer scaffolds to engineer trabecular bone. J Biomater Sci Polym Ed. 7(1):1995;23-38.
15. Liao C.J., Chen C.F., Chen J.H., Chiang S.F., Lin Y.J., Chang K.Y. Fabrication of porous biodegradable polymer scaffolds using a solvent merging/particulate leaching method. J Biomed Mater Res. 59(4):2002;676-681.
16. Ma P.X., Choi J.W. Biodegradable polymer scaffolds with well-defined interconnected spherical pore network. Tissue Eng. 7(1):2001;23-33.
17. Shastri V.P., Martin I., Langer R. Macroporous polymer foams by hydrocarbon templating. Proc Natl Acad Sci. 97(5):2000;1970-1975.
18. Mikos A.G., Thorsen A.J., Czerwonka L.A., Bao Y., Langer R., Winslow D.N., Vacanti J.P. Preparation and characterization of poly(L-lactic acid) foams. Polymer. 35(5):1994;1068-1077.
19. Ishaug S.L., Crane G.M., Miller M.J., Yasko A.W., Yaszemski M.J., Mikos A.G. Bone formation by three-dimensional stromal osteoblast culture in biodegradable polymer scaffolds. J Biomed Mater Res. 36(1):1997;17-28.
20. Whang K., Thomas C.H., Healy K.E., Nuber G. A novel method to fabricate bioabsorbable scaffolds. Polymer. 36(4):1995;837-842.
21. Schugens C., Maquet V., Grandfils C., Jerome R., Teyssie P. Polylactide macroporous biodegradable implants for cell transplantation 0.2. Preparation of polylactide foams by liquid-liquid phase separation. J Biomed Mater Res. 30(4):1996;449-461.
22. Nam Y.S., Park T.G. Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation. J Biomed Mater Res. 47(1):1999;8-17.
23. Hsu Y.Y., Gresser J.D., Stewart R.R., Trantolo D.J., Lyons C.M., Simons G.A., Gangadharam P.R., Wise D.L. Mechanisms of isoniazid release from poly(D,L-lactide-co-glycolide) matrices prepared by dry-mixing and low density polymeric foam methods. J Pharm Sci. 85(7):1996;706-713.
24. Kitchell J.P., Wise D.L. Poly(lactic/glycolic acid) biodegradable drug-polymer matrix systems. Methods Enzymol. 112:1985;436-448.
25. Gangadharam P.R., Ashtekar D.R., Farhi D.C., Wise D.L. Sustained release of isoniazid in vivo from a single implant of a biodegradable polymer. Tubercle. 72(2):1991;115-122.
26. Lo H., Kadiyala S., Guggino S.E., Leong K.W. Poly(L-lactic acid) foams with cell seeding and controlled-release capacity. J Biomed Mater Res. 30(4):1996;475-484.
27. Schugens C., Grandfils C., Jerome R., Teyssie P., Delree P., Martin D., Malgrange B., Moonen G. Preparation of a macroporous biodegradable polylactide implant for neuronal transplantation. J Biomed Mater Res. 29(11):1995;1349-1362.
28. Niwa T., Takeuchi H., Hino T., Kunou N., Kawashima Y. In vitro drug release behavior of D,L-lactide/glycolide copolymer (PLGA) nanospheres with nafarelin acetate prepared by a novel spontaneous emulsification solvent diffusion method. J Pharm Sci. 83(5):1994;727-732.
29. Bruder SP, Kraus KH, Goldberg VM, Kadiyala S. Critical-sized canine segmental femoral defects are healed by autologous mesenchymal stem cell therapy. In: The 44th Annual Meeting of the Orthopaedic Research Society, March 16-19, New Orleans, LA. Orthopaedic Research Society, 1998. p. 147.
30. Hadlock T., Sundback C., Hunter D., Cheney M., Vacanti J.P. A polymer foam conduit seeded with Schwann cells promotes guided peripheral nerve regeneration. Tissue Eng. 6(2):2000;119-127.
31. Freed L.E., Vunjak-Novakovic G., Biron R.J., Eagles D.B., Lesnoy D.C., Barlow S.K., Langer R. Biodegradable polymer scaffolds for tissue engineering. Biotechnology. 12(7):1994;689-693.
32. Wu B.M., Borland S.W., Giordano R.A., Cima L.G., Sachs E.M., Cima M.J. Solid free-form fabrication of drug delivery devices. J Control Rel. 40(1-2):1996;77-87.
33. Zhang R., Ma P.X. Synthetic nano-fibrillar extracellular matrices with predesigned macroporous architectures. J Biomed Mater Res. 52(2):2000;430-438.
34. Hutmacher D.W. Scaffolds in tissue engineering bone and cartilage. Biomaterials. 21(24):2000;2529-2543.
35. Widmer M.S., Gupta P.K., Lu L., Meszlenyi R.K., Evans G.R., Brandt K., Savel T., Gurlek A., Patrick C.W. Jr., Mikos A.G. Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration. Biomaterials. 19(21):1998;1945-1955.
36. Zein I., Hutmacher D.W., Tan K.C., Teoh S.H. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials. 23(4):2002;1169-1185.
37. Hutmacher D.W., Schantz T., Zein I., Ng K.W., Teoh S.H., Tan K.C. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. J Biomed Mater Res. 55(2):2001;203-216.
38. Rimell J.T., Marquis P.M. Selective laser sintering of ultra high molecular weight polyethylene for clinical applications. J Biomed Mater Res. 53(4):2000;414-420.
39. Vail N.K., Swain L.D., Fox W.C., Aufdlemorte T.B., Lee G., Barlow J.W. Materials for biomedical applications. Mater Des. 20(2-3):1999;123-132.
40. Stoodley M.A., Abbott J.R., Simpson D.A. Titanium cranioplasty using 3-D computer modelling of skulls detects. J Clin Neurosci. 3(2):1996;149-155.
41. Shishkovsky I.V., Tarasova E.Y., Zhuravel L.V., Petrov A.L. The synthesis of a biocomposite based on nickel titanium and hydroxyapatite under selective laser sintering conditions. Tech Phys Lett. 27(3):2001;211-213.
42. Low K.H., Leong K.F., Chua C.K., Du Z.H., Cheah C.M. Characterization of SLS parts for drug delivery devices. Rapid Prototyping J. 7(5):2001;262-267.
43. Lu S.X., Ramirez W.F., Anseth K.S. Modeling and optimization of drug release from laminated polymer matrix devices. AICHE J. 44(7):1998;1689-1696.
44. Levy R.A., Chu T.M.G., Halloran J.W., Feinberg S.E., Hollister S. CT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant. Am J Neuroradiol. 18(8):1997;1522-1525.
45. Porter N.L., Pilliar R.M., Grynpas M.D. Fabrication of porous calcium polyphosphate implants by solid freeform fabrication. a study of processing parameters and in vitro degradation characteristicsit. J Biomed Mater Res. 56(4):2001;504-515.
46. Curodeau A., Sachs E., Caldarise S. Design and fabrication of cast orthopedic implants with freeform surface textures from 3-D printed ceramic shell. J Biomed Mater Res. 53(5):2000;525-535.
47. Hong S.B., Eliaz N., Leisk G.G., Sachs E.M., Latanision R.M., Allen S.M. A new Ti-5Ag alloy for customized prostheses by three-dimensional printing (3DP(TM)). J Dent Res. 80(3):2001;860-863.
48. Dutt Roy J, Patterson J, Chesmel K, Payumo F, Doshi A, Choi J, Parsons J. An in vivo analysis of bone repair products made by three-dimensional fabrication techniques. In: The 47th Annual Meeting of the Orthopaedic Research Society, February 25-28, San Francisco. Orthopaedic Research Society, 2001. p. 0196.
49. Hollister SJ, Chu TM, Halloran JW, Feinberg SE. Design and manufacture of bone replacement scaffolds. In: Cowin S, editor. Bone Mechanics Handbook, vol. 36. Boca Raton, FL: CRC Press, 2001. p. 1-14.
50. Yang S., Leong K.F., Du Z., Chua C.K. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng. 8(1):2002;1-11.
51. Xu F., Wong Y.S., Loh H.T. Toward generic models for comparative evaluation and process selection in rapid prototyping and manufacturing. J Manuf Syst. 19(5):2000;283-296.
52. Fisher J.P., Dean D., Engel P.S., Mikos A.G. Photoinitiated polymerization of biomaterials. Ann Rev Mater Res. 31:2001;171-181.
53. Kreklau B., Sittinger M., Mensing M., Voigt C., Berger G., Burmester G., Rahmanzadeh R., Gross U. Tissue engineering of biphasic joint cartilage transplants. Biomaterials. 20:1999;1743-1749.
54. Murphy W.L., Kohn D.H., Mooney D.J. Growth of continuous bonelike mineral within porous poly(lactide-co-glycolide) scaffolds in vitro. J Biomed Mater Res. 50(1):2000;50-58.
55. Bigi A., Boanini E., Panzavolta S., Roveri N., Rubini K. Bonelike apatite growth on hydroxyapatite-gelatin sponges from simulated body fluid. J Biomed Mater Res. 59(4):2002;709-715.
56. Ball M.D., Howdle S.M., Antonov E.N., Bagratashvili V.N., Popov V.K., Sobol E.N., Downes S. Hydroxyapatite coating of biodegradable polymers by pulsed laser deposition. J Bone Jt Surg Br Vol. 80B(3S):1998;258.
57. Ylinen P., Kinnunen J., Laasonen E.M., Lamminen A., Vainionpaa S., Raekallio M., Rokkanen P., Tormala P. Lumbar spine interbody fusion with reinforced hydroxyapatite implants. Arch Orthop Trauma Surg. 110(5):1991;250-256.
58. Tencer A.F., Woodard P.L., Swenson J., Brown K.L. Bone ingrowth into polymer coated porous synthetic coralline hydroxyapatite. J Orthop Res. 5(2):1987;275-282.
59. Ignjatovic N., Tomic S., Dakic M., Miljkovic M., Plavsic M., Uskokovc D. Synthesis and properties of hydroxyapatite/poly L-lactide composite biomaterials. Biomaterials. 20:1999;809-816.
60. Kasuga T., Osa Y., Masayuki N., Abe Y. Preparation and mechanical properties of polylactic acid composites containing hydroxyapatite fibers. Biomaterials. 22(1):2001;19-23.
61. Durucan C., Brown P.W. Low temperature formation of calcium-deficient hydroxyapatite-PLA/PLGA composites. J Biomed Mater Res. 51(4):2000;717-725.
62. Shikinami Y., Okuno M. Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly L-lactide (PLLA). part I. Basic characteristics Biomaterials. 20(9):1999;859-877.
63. Deng X., Hao J., Wang C. Preparation and mechanical properties of nanocomposites of poly (D,L-lactide) with Ca-deficient hydroxyapatite nanocrystals. Biomaterials. 22(21):2001;2867-2873.
64. Mikos A., Sarakinos G., Vacanti J., Langer R., Cima L., Biocompatible polymer membranes and methods of preparation of three dimensional membrane structures. US Patent No. 5514378, 1996.
65. Zhang R., Ma P. Poly(alpha-hydroxyl acids)/hydroxyapatite porous composites for bone-tissue engineering. I. Preparation and morphology. J Biomed Mater Res. 44(4):1999;446-455.
66. Devin J.E., Attawia M.A., Laurencin C.T. Three-dimensional degradable porous polymer-ceramic matrices for use in bone repair. J Biomater Sci Polym Ed. 7(8):1996;661-669.
67. Verheyen C., Klein C., de-Blieck-Hogervorst J., Wolke J., vanBlitterswijk, deGroot K. Evaluation of hydroxyapatite/poly(L-lactide) composites. physico-chemical properties J Mater Sci: Mater Med. 4(1):1993;58-65.
68. Minamide A.M.D., Tamaki T.M.D.P., Kawakami M.M.D.P., Hashizume H.M.D.P., Yoshida M.M.D.P., Sakata R.M.D. Experimental spinal fusion using sintered bovine bone coated with type I collagen and recombinant human bone morphogenetic protein-2. Spine. 24(18):1999;1863.
69. Chapman M.W., Bucholz R., Cornell C. Treatment of acute fractures with a collagen-calcium phosphate graft material - a randomized clinical trial. J Bone Jt Surg Am Vol. 79A(4):1997;495-502.
70. Rhee S.H., Tanaka J. Synthesis of a hydroxyapatite/collagen/chondroitin sulfate nanocomposite by a novel precipitation method. J Am Ceram Soc. 84(2):2001;459-461.
71. Kikuchi M., Suetsugu Y., Tanaka J., Akao M. Preparation and mechanical properties of calcium phosphate/copoly L-lactide composites. J Mater Sci: Mater Med. 8(6):1997;361-364.
72. Chu T.M.G., Halloran J.W., Hollister S.J., Feinberg S.E. Hydroxyapatite implants with designed internal architecture. J Mater Sci: Mater Med. 12(6):2001;471-478.
73. Melican M.C., Zimmerman M.C., Dhillon M.S., Ponnambalam A.R., Curodeau A., Parsons J.R. Three-dimensional printing and porous metallic surfaces. a new orthopedic application J Biomed Mater Res. 55(2):2001;194-202.
74. Hollister S.J., Levy R.A., Chu T.M., Halloran J.W., Feinberg S.E. An image-based approach for designing and manufacturing craniofacial scaffolds. Int J Oral Max Surg. 29:2000;67-71.
75. 2. J Control Rel. 66(2-3):2000;177-185.
76. Mooney D.J., Baldwin D.F., Suh N.P., Vacanti L.P., Langer R. Novel approach to fabricate porous sponges of poly(D,L-lactic-co-glycolic acid) without the use of organic solvents. Biomaterials. 17(14):1996;1417-1422.
77. Washburn N.R., Simon C.G., Tona A., Elgendy H.M., Karim A., Amis E.J. Co-extrusion of biocompatible polymers for scaffolds with co-continuous morphology. J Biomed Mater Res. 60(1):2002;20-29.
78. Yoon J.J., Park T.G. Degradation behaviors of biodegradable macroporous scaffolds prepared by gas foaming of effervescent salts. J Biomed Mater Res. 55(3):2001;401-408.
79. Nam Y.S., Yoon J.J., Park T.G. A novel fabrication method of macroporous biodegradable polymer scaffolds using gas foaming salt as a porogen additive. J Biomed Mater Res. 53(1):2000;1-7.
80. Murphy W.L., Dennis R.G., Kileny J.L., Mooney D.J. Salt fusion. an approach to improve pore interconnectivity within tissue engineering scaffolds Tissue Eng. 8(1):2002;43-52.
81. Verheyen C., de Wijn J., van Blitterswijk C., de Groot K. Evalution of hydoxyapatite/poly(L-lactide) composites. mechanical behavior J Biomed Mater Res. 26(10):1992;1277-1296.
82. Higashi S., Yamamuro T., Nakamura T., Ikada Y., Hyon S.-H., Jamshidi K. Polymer-hydroxyapatite composites for biodegradable bone fillers. Biomaterials. 7:1986;183-187.
83. Begley C., Doherty M., Mollan R.et al. Comparative study of the osteoinductive properties of bioceramic, coral, and processed bone graft substitutes. Biomaterials. 16:1995;1181-1185.
84. Shin Y., Aoki H., Yoshiyama N., Akao M., Higashikata M. Surface-properties of hydroxyapatite ceramic as new percutaneous material in skin tissue. J Mater Sci: Mater Med. 3(3):1992;219-221.
85. Irigaray J., Braye F., Oudadesse H.et al. Diffusion of mineral elements evaluaded by PIXE at the bone-coral interface. J Biomater Sci Polym Ed. 7:1996;741-749.
86. Richard M., Aguado E., Cottrel M.et al. Ultrastructural and electron diffraction of the bone-ceramic interfacial zone in coral and biphasic VaP implants. Calcif Tissue Int. 62:1998;437-442.
87. Chu T.M.G., Orton D.G., Hollister S.J., Feinberg S.E., Halloran J.W. Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials. 23(5):2002;1283-1293.
88. Yasunaga T., Matsusue Y., Furukawa T., Shikinami Y., Okuno M., Nakamura T. Bonding behavior of ultrahigh strength unsintered hydroxyapatite particles/poly(L-lactide) composites to surface of tibial cortex in rabbits. J Biomed Mater Res. 47(3):1999;412-419.
89. Akao M., Aoki H., Kato K. Mechanical-properties of sintered hydroxyapatite for prosthetic applications. J Mater Sci. 16(3):1981;809-812.
90. Jarcho M. Calcium-phosphate ceramics as hard tissue prosthetics. Clin Orthop Rel Res. 1981;259-278.
91. Choi K., Kuhn J.L., Ciarelli M.J., Goldstein S.A. The elastic-moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus. J Biomech. 23(11):1990;1103-1113.
92. Shikinami Y., Okuno M. Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly L-lactide (PLLA). Part II. practical properties of miniscrews and miniplates Biomaterials. 22(23):2001;3197-3211.
93. Ignjatovic N., Savic V., Najman S., Plavsic M., Uskokovic D. A study of HAp/PLLA composite as a substitute for bone powder, using FT-IR spectroscopy. Biomaterials. 22:2001;571-575.
94. Durucan C., Brown P.W. Calcium-deficient hydroxyapatite-PLGA composites. mechanical and microstructural investigation J Biomed Mater Res. 51(4):2000;726-734.
95. Martin R.B., Chapman M.W., Holmes R.E., Sartoris D.J., Shors E.C., Gordon J.E., Heitter D.O., Sharkey N.A., Zissimos A.G. Effects of bone ingrowth on the strength and non-invasive assessment of a coralline hydroxyapatite material. Biomaterials. 10(7):1989;481-488.
96. Piecuch J.F., Goldberg A.J., Shastry C.V., Chrzanowski R.B. Compressive strength of implanted porous replamineform hydroxyapatite. J Biomed Mater Res. 18(1):1984;39-45.
97. Feinberg S.E., Hollister S.J., Halloran J.W., Chu T.M.G., Krebsbach P.H. Image-based biomimetic approach to reconstruction of the temporomandibular joint. Cells Tissues Organs. 169(3):2001;309-321.
98. Shinoka T., Shum-Tim D., Ma P.X., Tanel R.E., Isogai N., Langer R., Vacanti J.P., Mayer J.E. Jr. Creation of viable pulmonary artery autografts through tissue engineering. J Thorac Cardio Surg. 115(3):1998;536-545.
99. Seliktar D., Black R.A., Vito R.P., Nerem R.M. Dynamic mechanical conditioning of collagen-gel blood vessel constructs induces remodeling in vitro. Ann Biomed Eng. 28(4):2000;351-362.
100. Rothen-Weinhold A., Besseghir K., Vuaridel E., Sublet E., Oudry N., Kubel F., Gurny R. Injection-molding versus extrusion as manufacturing technique for the preparation of biodegradable implants. Eur J Pharm Biopharm. 48(2):1999;113-121.