Plasma spraying: From plasma generation to coating structure

Advances in Heat Transfer

Volumn 40, Issue C, 2007, Pages 205-344

  Fauchais, P ^a   Montavon, G ^a  

^a UNIVERSITY OF LIMOGES   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 69949126391     PISSN: 00652717     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2717(07)40003-X     Document Type: Article

References (342)

1. Hanneforth, P. (2005). The global thermal spray market - an overview of industry trends and dynamics. In "Proceedings of the International Thermal Spray Conference 2005". (E.F. Lugscheider, ed). DVS-Verlag GmbH, Düsseldorf Germany, e-proceedings.
2. Fauchais, P. (2004). J. Phys. D Appl. Phys. 37, R1-R23.
3. Pawlowski, L. (1995). "The Science and Engineering of Thermal Spray Coatings". John Wiley, New York, NY, USA.
4. Fauchais, P., Elchinger, M.-F., and Aubreton, J. (2000). J. High Temp. Mater. Process. 4, 21-42.
5. Boulos, M., Fauchais, P., and Pfender, E. (1994). "Thermal Plasmas," Vol. 1. Plenum Press, New York, NY, USA.
6. Coudert, J. F., Chazelas, C., Rigot, D., and Rat, V. (2004). J. High Temp. Mater. Process. 6(2), 247-265.
7. Fauchais, P., Coudert, J. F., and Vardelle, M. (2002). J. High Temp. Mater. Process. 6(2), 247-267.
8. Fauchais, P., Coudert, J. F., Vardelle, M., Vardelle, A., and Denoirjean, A. (1992). J. Therm. Spray Techn. 1(2), 117-128.
9. Fauchais, P., Coudert, J. F., and Vardelle, M. (1989). Diagnostics in thermal plasma processing. In "Plasma Diagnostics" (O. Auciollo and D.L. Flamm, eds.), Vol. 1. Academic Press, New York, NY, USA.
10. Wittmann, K., Blein, F., Coudert, J. F., and Fauchais, P. (2001). Control of the injection of a suspension containing nanograins in a dc plasma. In "Thermal Spray: New Surfaces for a New Millenium" (C.C. Berndt, K.A. Khor and E. Lugscheider, eds.), pp. 375-381. ASM Int., Materials Park, OH, USA.
11. Coudert, J. F., Planche, M. P., and Fauchais, P. (1995). Plasma Chem. Plasma Process. 15(1), 47-70.
12. Brossa, M. and Pfender, E. (1988). Plasma Chem. Plasma Process. 8(1), 75-90.
13. Chen, W. L. T., Heberlein, J., and Pfender, E. (1994). Plasma Chem. Plasma Process. 14(3), 317-332.
14. 2O/Ar arc plasma jet, 16th Int. Symp. Plasma Chemistry, Taormina, Italy, Abstracts and full-papers CD, 1-6.
15. Pfender, E., Fincke, J., and Spores, R. (1991). Plasma Chem. Plasma Process. 11(4), 529-543.
16. Heberlein, J. (2002). J. High Temp. Mater. Process. 6(3), 321-328.
17. Heberlein, J. (1999). Heat and mass transfer under plasma conditions. Ann. N.Y. Acad. Sci. 891, 14-27.
18. Roumilhac, Ph., Coudert, J. F., and Fauchais, P. (1990). Influence of the arc chamber design and of the surrounding atmosphere on the characteristics and temperature distributions of Ar-H2 and Ar-He spraying plasma jets. In "Plasma Processing and Synthesis of Materials" (D. Apelian and J. Szekely, eds.), Vol. 190, pp. 227-242. MRS Pittsburg, WV, USA.
19. Coudert, J. F., Planche, M. P., and Fauchais, P. (1996). Plasma Chem. Plasma Process. 16, 211S-228S.
20. Duan, Z. and Heberlein, J. (2002). J. Therm. Spray Techn. 11(1), 44-51.
21. Leblanc, L. and Moreau, C. (2002). J. Therm. Spray Techn. 11(3), 380-386.
22. Coudert, J. F., Planche, M. P., and Fauchais, P. (1994). J. High Temp. Mater. Process. 3(6), 639-652.
23. Duan, Z., Beall, L., Planche, M. P., Heberlein, J., Pfender, E., and Stachowicz, M. (1997). Arc voltage fluctuations as an indication of spray torch anode condition. In "Thermal Spray: A United Forum of Scientific and Technological Advances" (C.C. Berndt, ed.), pp. 407-411. ASM Int., Materials Park, OH, USA.
24. Rigot, D., Delluc, G., Pateyron, B., Coudert, J. F., Fauchais, P., and Wigren, J. (2003). J. High Temp. Mater. Process. 3, 291-309.
25. Duan, Z., Beall, L., Schein, J., Heberlein, J., and Stachowicz, M. (2000). J. Therm. Spray Techn. 9(2), 225-234.
26. Roumilhac, P. (1990). Contribution to the Metrology and Understanding of the d.c. Plasma Spray Torches and Transferred Arcs for Reclamation at Atmospheric Pressure, Ph.D. Thesis (in French), University of Limoges, France.
27. Zhukov, M. F. (1994). Linear direct current plasma torches. In "Thermal Plasma and New Materials Technology" (O. Solonenko and M.F. Zhukov, eds.), pp. 9-17. Cambridge Interscience, Cambridge, MA, USA.
28. Betoule, O. (1994). Influence of Temperature and Velocity Distributions of a d.c. Plasma Jet and Injected Particles on Alumina Coating Properties, Ph.D. Thesis (in French), University of Limoges, France.
29. Betoule, O., Soucy, G., Vardelle, M., Fauchais, P., Boulos, M., and Ducos, M. (1992). Influence of the designing parameters of a plasma torch on alumina particulates velocity and coating properties. In "Thermal Spray: International Advances in Coatings Technology" (C.C. Berndt, ed.), pp. 773-779. ASM Int., Materials Park, OH, USA.
30. Pfender, E. (1978). Electric arcs and arc gas heaters. In "Gaseous Electronics: Electrical Discharges" (M.N. Hirsh and H.J. Oskam, eds.), Vol. 1. Academic Press, New York, NY, USA.
31. Murphy, A. B. (1997). Phys. Rev. E 55, 7473-7484.
32. Fincke, J. R., Swank, W. D., and Haggard, D. C. (1993). J. Therm. Spray Techn. 2, 345-353.
33. Zhou, X. and Heberlein, J. (1998). J. Phys. D Appl. Phys. 31(19), 2577-2590.
34. Zhou, X. and Heberlein, J. (1996). IEEE Trans. Compon. Pack. Manuf. Technology 19(3), 320-328.
35. Fauchais, P., Vardelle, A., and Dussoubs, B. (2001). J. Therm. Spray Techn. 10(1), 44-66.
36. Planche, M. P. (1995). Contribution to the Study of the Fluctuations in a d.c. Plasma Torch. Application to the Dynamic of the Arc and the Flow Velocity Measurement, Ph.D. Thesis (in French), University of Limoges, France.
37. Pateyron, B., Elchinger, M. F., Delluc, G., and Fauchais, P. (1996). Plasma Chem. Plasma Process. 16, 39-58.
38. Planche, M. P., Coudert, J. F., and Fauchais, P. (1998). Plasma Chem. Plasma Process. 18, 263-284.
39. Coudert, J. F., Chazelas, C., Rigot, D., and Rat, V. (2005). J. High Temp. Mater. Process. 9, 173.
40. Lagnoux, O. (1999). Spray of Metallic Powders by a d.c. Plasma Jet Study of the Air Entrainment of Surrounding Air and Its Influence on the Particle Oxidation in Flight and Coatings, p. 231 Ph.D. Thesis (in French), University of Limoges, France.
41. Lagnoux, O., Coudert, J. F., Wittmann, K., and Fauchais, P. (2000). Study of the air entrainment within d.c. plasma jets. In "Thermal Spray Surface Engineering via Applied Research" (C.C. Berndt, ed.), pp. 71-77. ASM International, Materials Park, OH, USA.
42. Henne, R., Borck, V., Siebold, D., Mayr, M., Reusch, A., Rahmane, M., Soucy, G., and Boulos, M. (1995). Converging-diverging nozzles for improved atmospheric plasma spraying. In "Thermal Plasma Processes" (D. Neuschutz, ed.), pp. 247-266. VDI Berichte, Düsseldorf, Germany.
43. Rahmane, M., Soucy, G., Boulos, M., and Henne, R. (1998). J. Therm. Spray Techn. 7, 349-356.
44. Okada, M. and Marno, H. (1968). British Welding J, 371-81.
45. Guest, C. J. S. and Ford, K. G. (1975). United States Patent 3892882.
46. Houben, J. M. and Zaat, J. H. (1976). Shielded open air plasma spraying of reactive materials. In "Proceedings of the 8th International Thermal Spray Conference," Pub. Am. Weld. Comp., pp. 78-84. Florida, USA.
47. Borisov, Y. (1993). Structure and parameters of hetergeneous plasma jets shielded by water flow. In "2nd Plasma Technik Symp.," pp. 1-9. Plasma Technik, Wohlen, Switzerland.
48. Sahoo, P. and Lewis, T. F. (1992). MCrAlY+X coatings applied using the high celerity Gator-Gard plasma spray system. In "Thermal Spray: International Advances in Coatings Technology" (C.C. Berndt, ed.), pp. 75-81. ASM International, Materials Park, OH, USA.
49. Weissman, M., Smith, M. F., and Chambers, W. B. (1989). Diagnostics of a low pressure plasma spray deposition system. In "Thermal Spray Technology: New Ideas and Processes" (D.L. Houck, ed.), pp. 103-109. ASM International, OH, USA.
50. Smith M.F, M. F. and Dykhnizen, R. C. (1998). Surf. Coat. Tech. 34, 25-30.
51. Smith, M. F. (1991). Laser measurement of particle velocities in vacuum plasma spray deposition. In "1st Plasma Technik Symp. Proc.," Vol. 1, pp. 77-86. Plasma Technik Wohlen, Switzerland.
52. Jäger, D. A., Stover, D., and Schlump, W. (1992). High pressure plasma spraying in controlled atmosphere up to two bar. In "Thermal Spray: International Advances in Coatings Technology" (C.C. Berndt, ed.), pp. 69-75. ASM International, Materials Park, OH, USA.
53. Sodeoka, S., Suzuki, M., and Ueno, K. (1996). J. Therm. Spray Techn. 5, 277-281.
54. Sodeoka, S., Suzuki, M., Inoue, T., and Ueno, K. (1998). Effect of spray parameters on the plasma in high pressure plasma spraying up to 300 kPa. In "Thermal Spray: Meeting the Challenges of the 21st Century" (C. Coddet, ed.), Vol. 2, pp. 1437-1443. ASM International, Materials Park, OH, USA.
55. Zirhut, J., Haslbeck, P., Landes, K. D., Barbezat, G., Muller, M., and Schutz, M. (1998). Triplex - an innovative three-cathode plasma torch. In "Thermal Spray: Meeting the Challenges of the 21st century" (C. Coddet, ed.), Vol. 2, pp. 1375-1382, ASM International, Materials Park, OH, USA.
56. Hühle, H. M. and Barbezat, G. (2003). Development of an economical high-performance plasma spray system for highest-quality demands even under challenging production conditions, Wissenschaften Kolloquiren, Technishe Universität, Ilmenau, Germany, 24 September, e-proceedings, session 7.7.
57. Moreau, C., Gougeon, P., Burgess, A., and Ross, D. (1995). Characterization of particle flows in an axial injection plasma torch. In "Thermal Spray: Science and Technology" (S. Sampath and C.C. Berndt, eds.), pp. 141-147. ASM International, Materials Park, OH, USA.
58. Matthäus, G. (2003). Application of the HVOF process to internal coatings of cylinders, and hard and software for the internal coating technology of complex components, Wissenschaften Kolloquiren, Technishe Universität, Ilmenau, Germany, 24 September, e-proceedings, session 7.7.
59. Nicoll, A. R. (1994). Production plasma spraying in the automotive industry: An European viewpoint. In "Thermal Spray: Industrial Application" (C.C. Berndt and S. Sampath, eds.), pp. 7-14. ASM International, Materials Park, OH, USA.
60. Barbezat, G. (2002). Automot. Technol. 2, 47-54.
61. Morishita, T. (1993). Coating by 250 kW plasma jet spray system, In "2nd Plasma-Technik Symp. Proc.," Vol. 1, pp. 137-145. Plasma Technik Wohlen, Switzerland.
62. Brilhac, J. F. (1993). Contribution to the Static and Dynamic Study of Vortex Stabilized d.c. Plasma Torches, Ph.D. Thesis (in French), University of Limoges, France.
63. Hrabovsky, M. (1998). Pure Appl. Chem. 70, 1157-1166.
64. Chraska, P. and Hrabovsky, M. (1992). An overview of water stabilized plasma guns and their applications. In "Thermal Spray: International Advances in Coatings Technology" (C.C. Berndt, ed.), pp. 81-87. ASM International, Materials Park, OH, USA.
65. Hrabovsky, M., Konrad, M., Kopecky, V., Hlina, J., Benes, J., and Vesely, E. (1997). J. High Temp. Mater. Process. 1, 167-175.
66. Hrabovsky, M. (2002). Pure Appl. Chem. 3(74), 429.
67. Hrabovsky, M., Kopecky, V., Kavka, T., Chumak, A., and Sember, V. (2003). Properties of a new plasma spraying torch with hybrid gas-liquid arc stabilization, Wissenschaften Kolloquium, Technische Universität, Ilmenau, Germany, 24 September, e-proceedings, session 7.7.
68. Freeman, M. P. and Chase, J. D. (1968). J. Appl. Phys. 39, 180.
69. Boulos, M. (1997). J. High Temp. Mater. Process. 1, 117-139.
70. Boulos, M. (1992). J. Therm. Spray Techn. 1(1), 33-40.
71. Gitzhofer, F., Boulos, M., Heberlein, J., Henne, R., Ishigaki, T., and Yoshida T. T. (2000). MRS Bull., July, 38-42.
72. Mailhot, K. Gitzhofer, F., and Boulos, M. (1997). In Thermal Spray: A United Forum for Scientific and Technological Advances, Ed. C.C. Berndt, ASM International, Materials Park, OH, USA, 21-24.
73. Leveillé, V., Boulos, M., and Gravelle, D. (2003). In "Thermal Spray 2003: Advancing the Science and Applying the Technology," (C. Moreau and B. Marple, eds.), Vol. 2, pp. 1011-1016. ASM International, Materials Park, OH, USA.
74. Fincke, J. and Neiser, R. (2000). Advanced diagnostics and modeling of spray processes. MRS Bull., July, 26.
75. Vanhooren, H., Meirlaen, J., Amerlinck, Y., Claeys, F., Vangheluwe, H., and Vanrolleghem, P. A. (2003). Hydroinformatics 5, 27-36.
76. Freton, P., Gonzalez, J. J., and Gleizes, A. (2000). J. Phys. D Appl. Phys. 33, 2442-2452.
77. Westhoff, R., Trapaga, G., Szekely, J., and Metallurgical, J. (1992). Trans. B 23B, 683-697.
78. Lee, Y. C. and Pfender, E. (1987). Plasma Chem. Plasma Process. 7, 1-12.
79. Williamson, R. L., Fincke, J., and Chang, C. H. (2000). A computational examination of the sources of statistical variance in particle parameters during thermal plasma spraying. Plasma Chem. and Plasma Process. 20, 299-312.
80. Ahmed, I. and Bergman, T. L. (2000). J. Therm. Spray Techn. 9, 215-227.
81. Liu, B., Zhang, T., and Gawne, D. T. (2000). Surf. Coat. Techn. 132, 202-211.
82. Chang, C. H. and Ramshaw, J. D. (1993). Plasma Chem. and Plasma Process. 13, 189-202.
83. Chang, C. H. and Ramshaw, J. D. (1996). Plasma Chem. and Plasma Process. 16, 17-31.
84. Baudry, C., Vardelle, A., and Mariaux, G. (2004). 3-D and time dependent model of the dynamic behavior of the arc in a plasma spray torch. In "Thermal Spray 2004: Advances in Technology and Application" (B.R. Marple and C. Moreau, eds.), pp. 717-723. ASM International, Materials Park, OH, USA.
85. Chen, K. and Boulos, M. (1994). J. Phys. D Appl. Phys. 27, 946-952.
86. Xue, S., Proulx, P., and Boulos, M. (2001). J. Phys. D Appl. Phys. 34, 1897-1916.
87. Xue, S., Proulx, P., and Boulos, M. (2002). J. Phys. D Appl. Phys. 35, 1123-1130.
88. Xue, S., Proulx, P., and Boulos, M. (2002). J. Phys. D Appl. Phys. 35, 1131-1140.
89. Xue, S., Proulx, P., and Boulos, M. (2003). Effect of the coil angle in an inductively coupled plasma torch: A novel two-dimensional model. Plasma Chem. Plasma Process. 23(2), 254-263.
90. Xue, S., Proulx, P., and Boulos, M. (2003). Turbulence modeling of inductively coupled plasma flows. In "Thermal Spray 2003: Advancing the Science and Applying the Technology" (C. Moreau and B. Marple, eds.), Vol. 1, pp. 993-999. ASM International, Materials Park OH, USA.
91. Fincke, R., Rodriguez, R., and Pentecost, C. G. (1991). Plas. Proc. Syn. Mat. III, MRS Symposia Proceeding 190 (D. Apelian and J. Skelezy, eds.), pp. 184-190. MRS, Warrendale, PA, USA.
92. Huang, P. C., Heberlein, J., and Pfender, E. (1995). Plasma Chem. Plasma Process. 15, 25-37.
93. Kolman, D., Heberlein, J., Pfender, E., and Young, R. (1996). Plasma Chem. Plasma Process. 16, 57-69.
94. Wan, Y. P., Fincke, J., Sampath, S., Prasad, V., and Herman, H. (2002). Int. J. Heat Mass Transfer 45, 1007-1015.
95. Li, H. P. and Chen, X. (2001). Thin Solid Films 390, 175-180.
96. Bolot, R., Monin, V., Imbert, M., and Coddet, C. (1998). Mathematical modeling of flattening process on rough surfaces in thermal spray. In "Thermal Spray: Meeting the Challenges of the 21st Century" (C. Coddet, ed.), Vol. 1, pp. 439-444. ASM International, Materials Park, OH, USA.
97. Liu, B., Zhang, T., and Gawne, D. T. (2000). Surf. Coat. Techn. 132(2-3), 202-216.
98. Dussoubs, B. (1998). 3D Modelling of the Plasma Spray Process, Ph.D. Thesis (in French), University of Limoges, France.
99. Legros, E. (2003). Contribution to 3D Modelling of the Spray Process and Application to a Two-Torch Set-up, Ph.D. Thesis (in French), University of Limoges, France.
100. Mariaux, G., Fauchais, P., Vardelle, A., and Pateyron, B. (2001). High Temp. Mater. Process. 5, 61-85.
101. Vardelle, A., Fauchais, P., Vardelle, M., and Mariaux, G. (2005). Direct current plasma spraying: diagnostics and process simulation, EUROMAT 2005, session D.63, 5-8 September , Prague, Czech Republic.
102. Li, H. P., Pfender, E., and Chen, X. (2003). J. Phys. D Appl. Phys. 36, 1084-1096.
103. Baudry, C. (2003). Contribution to the Transient and 3D Modeling of the Dynamic Behaviour of the Arc within a Plasma Spray Torch, Ph.D thesis (in French), University of Limoges, France.
104. Mariaux, G. and Vardelle, A. (2005). Int. J. Therm. Sci. 44, 211-226.
105. Poirier, T., Vardelle, A., Elchinger, M. F., Vardelle, M., Grimaud, A., and Vesteghem, H. (2003). Deposition of nanoparticle suspensions by aerosol flame spraying: Model of the spray and impact processes. J. Therm. Spray Techn. 12, 393-402.
106. Delluc, G., Mariaux, G., Vardelle, A., Fauchais, P., and Pateyron, B. (2003). A numerical tool for plasma spraying. In "Proceedings of ISPC16, (R. d'Agostino, ed.)," University of Bari, e-proceedings.
107. Park, J.H., Heberlein, J., Pfender, E., Lan Y, Y. C. Rund J, C., and Wang, H. P. (1999). Heat and mass transfer under plasma conditions. Ann. N.Y. Acad. Sci. 891, 417-424.
108. Pfender, E. and Lee, Y. C. (1985). Plasma Chem. Plasma Process. 5(3), 211-237.
109. Lee, Y. C., Chyou, Y. P., and Pfender, E. (1985). Plasma Chem. Plasma Process. 5(3), 391-409.
110. Boulos, M. I., Fauchais, P., Vardelle, A., and Pfender, E. (1993). Fundamentals of plasma particle momentum and heat transfer. In "Plasma Spraying: Theory and Applications" (R. Suryanarayanan, ed.), pp. 3-60. World Scientific, Singapore.
111. Essoltani, A., Proulx, P., Boulos, M. I. and Gleizes, A. (1991). Thermal plasma processing, ASME 161, 145-149.
112. Sobolev, V. V., Guilmany, J. M., and Mart, A. J. (1999). J. Mater. Process. Techn. 87, 37-45.
113. Xu Dong-Yan, Wu Xin-Can, and Chen Xi. (2002). Surf. Coat. Techn. 171(1-3), 149-156.
114. Clift, R., Grace, J. R., and Weber, J. E. (1978). "Bubbles, Drops and Particles". Academic Press, New York.
115. Delbos, C., Fazilleau, J., Rat, V., Coudert, J. F., Fauchais, P., and Pateyron, B. (2006). Understanding zirconia suspension plasma spraying through simple models - Part 2: Particle treatment and coating, accepted in Plasma Chem. Plasma Proc. 15(4), 393-414.
116. Chen, W. L. T., Heberlein, J., Pfender, E., Pateyron, B., Delluc, G., Elchinger, M. F., and Fauchais, P. (1995). Plasma Chem. Plasma Proc. 15(3), 559-579.
117. Bourdin, E., Fauchais, P., and Boulos, M. I. (1983). Int. J. Heat Mass Transfer 26, 567-582.
118. Pateyron, B., Jet & Poudres, free software downloadable at http://www.unilim.fr/spcts
119. Vardelle, M., Vardelle, A., and Fauchais, P. (1993). J. Therm. Spray Techn. 2(1), 79-89.
120. Lewis, J. W. and Gauvin, W. H. (1973). AIChEJ 19, 982-995.
121. Vardelle, A., Themelis, N. J., Dussoubs, B., Vardelle, M., and Fauchais, P. (1997). J. High Temp. Mater. Process. 1(3), 295-313.
122. Essoltani, A., Proulx, P., Boulos, M. I., and Gleizes, A. (1990). J. Anal. Atom. Spectrom. 5, 543-557.
123. Essoltani, A., Proulx, P., Boulos, M. I., and Gleizes, A. (1994). Plasma Chem. Plasma Process. 14(3), 301-315.
124. Cram, L. (1985). J. Phys. D 18, 401-417.
125. Essoltani, A., Proulx, P., Boulos, M. I., and Gleizes, A. (1993). High Temp. Chem. Process. 2, 37-51.
126. Essoltani, A., Proulx, P., Boulos, M. I., and Gleizes, A. (1991). ASME-HTO 161, 145-157.
127. Turkdoyan, E. T., Grieven, P., and Darken, L. S. (1963). J. Chem. Phys. 67, 1647-1655.
128. Vardelle, M., Vardelle, A., Li, K.-I., Fauchais, P., and Themelis, N. J. (1996). Pure Appl. Chem. 68(5), 1093-1099.
129. Ageorges, H. and Fauchais, P. (2000). J. High Temp. Mater. Process. 4, 323-337.
130. Harpee, J. F. and Moore, D. W. (1968). J. Fluid Mech. 32, 367-376.
131. Prakash, S. and Sirignano, W. A. (1978). J. Heat Mass Transfer 21, 885-897.
132. 2 plasma. Influence on the coating properties), Ph.D. Thesis, University of Limoges, France, October.
133. Zhang, H., Vardelle, A., and Themelis, N. J. (2003). J. High Temp. Mater. Process. 3, 277-292.
134. Syed, A. A., Denoirjean, A., Denoirjean, P., Labbe, J. C., and Fauchais, P. (2004). J. High Temp. Mater. Process. 8(2), 253-276.
135. Denoirjean, A., Lefort, P., and Fauchais, P. (2003). Phys. Chem. Chem. Phys. 5, 5133-5138.
136. Seyed, A. (2004). Co-Spraying in Air of Alumina and Stainless Steel Particles by d.c. Plasma Jet, Ph.D. Thesis, University. of Limoges, France. and Ghalam Ishaq Khan Institute, Islamabad, Pakistan, February.
137. Syed, A. A., Denoirjean, A., Denoirjean, P., Labbe nd, J. C., and Fauchais, P. (2005). J. Therm. Spray Techn. 14(1), 124-177.
138. Dallaire, S. (1992). J. Therm. Spray Techn. 1(1), 41-54.
139. Borisov, Y. and Borisova, A. (1993). Application of self-propagating high-temperature synthesis in thermal spraying technology. In "Thermal Spray: Research, Design and Applications" (T.F. Bernicki, ed.), pp. 139-145. ASM International, Materials Park, OH, USA.
140. Shaw, K. G., McCoy, K. P., and Trogolo, J. A. (1994). Fabrication of composite spray powders using reaction synthesis. In "Thermal Spray: Industrial Applications" (C.C. Berndt and S. Sampath, eds.), pp. 509-515. ASM International, Materials Park, OH, USA.
141. Deevi, S. C., Sikka, V. K., Swindeman, C. J., and Seals, R. D. (1997). J. Therm. Spray Techn. 6(3), 335-347.
142. Haller, B., Bonnet, J. P., Fauchais, P., Grimaud, A. and Labbe, J.C. (2004). TiC based coatings prepared by combining SHS and plasma spraying, "ITSC2004 Innovative Equipment and Process Technology V.", pp. 666-669 DVS, Düsseldorf, Germany, CD Rom.
143. Fincke, J. R., Haggard, d. d., and Swank, W. D. (2001). J. Therm. Spray Techn. 10(2), 255-277.
144. Hollis, K. and Neiser, R. (1998). J. Therm. Spray Techn. 7(3), 383-391.
145. Vardelle, M., Vardelle, A., Fauchais, P., and Boulos, M. I. (1983). AIChE 34, 236-253.
146. Vardelle, M., Vardelle, A., Leger, A. C., and Fauchais, P. (1995). J. Therm. Spray Techn. 4(1), 50-64.
147. Fincke, J. R., Swank, W. D., and Jeffery, C. L. (1990). IEEE Trans. Plasma Sci. 18, 948-957.
148. Swank, W. D., Fincke, J. R., and Haggard, d. d. (1995). A particle temperature sensor for monitoring and control of the thermal spray process. In "Thermal Spray: Sciences and Technology" (C.C. Berndt and S. Sampath, eds.), pp. 111-116. ASM International, Materials Park, OH, USA.
149. Kowalsky, K. A., Marantz, D. R., Smith, M. F., and Oberkampf, W. L. (1991). HVOF: Particle, flame diagnostics and coating characteristics. In "Thermal Spray: Research and Applications" (T.F. Bernicki, ed.), pp. 587-592. ASM International, Materials Park, OH, USA.
150. Smith, M. F., O'Hern, T. J., Brockmann, J. E., Neiser, R. A., and Roeme, T. J. (1995). A comparison of two-laser diagnostics for analysis of particles in thermal spray streams. In "Thermal Spray: Sciences and Technology" (C.C. Berndt and S. Sampath, eds.), pp. 105-110. ASM International, Materials Park, OH, USA.
151. Sakuta, T. and Boulos, M. I. (1988). IEEE Trans. Plasma Sci. 108, 389-396.
152. Moreau, C., Cielo, P., Lamontagne, M., Dallaire, S., and Vardelle, M. (1990). Meas. Sci. Technol. 1, 807-815.
153. Landes, K. D., Streibl, T. V., and Zierhut, J. (2002). In "ITSC 2002 Proceedings" (E. Leigsheider,ed.), pp. 47-53. DVS Düsseldorf, Germany.
154. Bach, Fr.-W., Landes, K., Lugsheider, E., Copitzky, T., Prehm B. Droessler, J., Emst, F., Fischer, A., Seiman, K., Streibl, T., Zimmerman, S., and Baiyer, E. (2003). Diagnostics at thermal coating processes - research results of the DFG-founded project. In "Thermal Spray 2003: Advancing the Science and Applying the Technology" (C. Moreau and B. Marple, eds.), pp. 1221-1227. ASM International, Materials Park, OH, USA.
155. Mishin, J., Vardelle, M., and Fauchais, P. (1987). J. Phys. E. Sci. Instrum. 20, 620-625.
156. Vardelle, M., Vardelle, A., Fauchais, P., Li, K.-I., Dussoubs, B., and Themelis, N. J. (2001). J. Therm. Spray Techn. 10(2), 267-289.
157. Wilden, J. and Franck, H. (1999). Theory of particle composition analysis during plasma spraying. In "Proceedings of ITSC 1999" (E. Lugsheider, ed.), pp. 165-171 DVS Düsseldorf, Germany.
158. Vardelle, A., Vardelle, M., Zhang, H., Themelis, N. J., and Gross, K. (2002). J. Therm. Spray Techn. 11(2), 244-252.
159. Fauchais, P. and Vardelle, M. (2003). How to improve the reliability and reproducibility of plasma sprayed coatings. In "Thermal Spray 2003: Advancing the Science and Applying the Technology" (C. Moreau and B. Marple, eds.), pp. 1165-1174. ASM International, Materials Park, OH, USA.
160. Moreau, C., Bisson, J.-L., Lima, R. S., and Marple, B. R. (2005). Pure Appl. Chem. 77(2), 443-462.
161. Moreau, C., Gougeon, P., Lamontagne, M., Lacasse, V., Vaudreuil, G., and Cielo, P. (1994). On-line control of the plasma spraying process by monitoring the temperature, velocity, and trajectory on in-flight particles. In "Thermal Spray: Industrial Applications" (C.C. Berndt and S. Sampath, eds.), pp. 431-437. ASM International, Materials Park, OH, USA.
162. Bisson, J. F., Lamontagne, M., Moreau, C., Pouliot, L., Blainard, J., and Nadeau, F. (2001). Ensemble in-flight particle diagnostics under thermal spray conditions. In "Thermal Spray: New Surfaces for a New Millenium" (C.C. Berndt, K.A. Khor and E. Lugsheider, eds.), pp. 705-711. ASM International, Materials Park, OH, USA.
163. Vattulainen, J., Hämäläinen, E., Hernberg, R., Varisto, P., and Mäntyla, T. (2001). J. Term. Spray Techn. 10(1), 94-104.
164. Bertrand, P., Smurnov, I., and Ignatiev, M. (2002). In "ITSC 2002 Proceedings" (E. Lugsheider, ed.), pp. 66-72. DVS Düsseldorf, Germany.
165. Largo, J., Hämäläinen, E., and Krikka, K. (2003). In-flight particle imaging in thermal spraying with diode laser illumination. In "Thermal Spray 2003: Advancing the Science and Applying the Technology" (C. Moreau and B.R. Marple, eds.), pp. 1113-1119. ASM International, Materials Park, OH, USA.
166. Craig, J. E., Parker, R. A., and Lee, D. Y. (2000). Particle temperature measurements by spectroscopic and two-wavelength streak imaging. In "Thermal Spray: Surface Engineering via Applied Research" (C.C. Berndt, ed.), pp. 51-66. ASM International, Materials Park, OH, USA.
167. Agapakis, J. and Hoffman, T. (1992). J. Therm. Spray Techn. 1(1), 19-27.
168. Renouard-Vallet, G. (2003). Elaboration par projection plasma d'électrolytes de zircone yttriee denses et de faible épaisseur pour SOFC (Manufacturing by plasma spraying of dense and thin yttria-zirconia electrolytes for SOFC). Ph.D. Thesis, University of Limoges, France and University of Sherbrooke, CN, November (in French).
169. Padet, J. P. (1991). "Flowing Fluids, Methods and Models." Masson Editions, Paris (in French).
170. Swank, W. P., Chang, C. H., Fincke, J. R., and Haggard, D. C. (1996). Measured and simulated particle flow field parameters in a high power plasma spray. In "Thermal Spray: Practical Solution for Engineering Problems" (C.C. Berndt, ed.), pp. 541-547. ASM International, Materials Park, OH, USA.
171. Janisson, S., Meillot, E., Vardelle, A., Coudert, J. F., Pateyron, B., and Fauchais, P. (1999). J. Therm. Spray Techn. 8(4), 545-552.
172. Vardelle, M., Fauchais, P., Vardelle, A., and Leger, A. C. (1997). Influence of the variation of plasma torch parameters on particle melting and solidification. In "Thermal Spray: A United Forum for Scientific and Technology Advances" (C.C. Berndt, ed.), pp. 535-543. ASM International, Materials Park, OH, USA.
173. Bisson, J. F., Gauthier, B., and Moreau, C. (2003). J. Therm. Spray Techn. 12(1), 38-51.
174. Bisson, J. F. and Moreau, C. (2003). J. Therm. Spray Techn. 12(2), 258-267.
175. Chang, C. H. (1992). Numerical simulation of alumina spraying in an argonhelium plasma jet. In "Thermal. Spray: International Advances in Coatings Technology." (C.C. Berndt, ed.), pp. 793-799. ASM International, Materials Park, OH, USA.
176. Dukowicz, J. K. (1980). J. Comput. Phys. 35, 229-237.
177. O'Rourke, P. J. (1989). J. Comput. Phys. 84, 345-362.
178. Belashchenko, V. E. and Chernyak, Yu. B. (1993). J. Therm. Spray Techn. 2(2), 159-171.
179. Pfender, E. and Chang, C. H. (1998). Plasma spray jets and plasma-particulate interaction: Modeling and experiments. In "Thermal Spray: Meeting the Challenges of 21st Century" (C. Coddet, ed.), pp. 315-327. ASM International, Materials Park, OH, USA.
180. Mariaux, G., Baudry, C., and Vardelle, A. (2001). 3-D modeling of gas flow and particle spray jet in plasma spraying. In "Thermal Spray: New Surfaces for a New Millenium" (C.C. Berndt, K.A. Khor and E. Lugsheider, eds.), pp. 933-942. ASM International, Materials Park, OH, USA.
181. Bandyopadhyay, R. and Nylen, P. (2003). J. Therm. Spray Techn. 12(4), 204-492.
182. Mostaghimi, J., Chandra, S., Ghafouri-Azar, R., and Dolatabadi, A. (2003). Surf. Coat. Techn. 163-164, 1-12.
183. Proulx, P. (1984). Interaction plasma-particules dans la modélisation des plasmas á induction," mémoire de M.Sc. A., Université de Sherbrooke, QC, CA.
184. Proulx, P., Mostaghimi, J., and Boulos, M. I. (1983). Plasma modelling under dense loading conditions, "6th International Symposium on Plasma Chemistry" (M.I. Boulos, ed.), pp. 159-165. University of Sherbrooke, Montreal, Canada.
185. Mostaghimi, J., Proulx, P., Boulos, M. I., and Barnes, R. M. (1985). Spectro-Chem. Acta 40B, 153-162.
186. Proulx, P., Mostaghimi, J., and Boulos, M. I. (1985). Int. J. Heat Mass Transfer 28, 1327-1335.
187. Crowe, C. T., Sharma, M. P., and Stock, D. E. (1977). J. Fluid. Eng. 99, 325-337.
188. Proulx, P., Mostaghimi, J., and Boulos, M. I. (1987). Plasma Chem. Plasma Process. 7(1), 29-45.
189. Vardelle, A., Vardelle, M., Fauchais, P., Proulx, P., and Boulos, M. I. (1992). Loading effect by oxide powders in dc plasma jets. In "Thermal Spray: International Advances in Coatings Technology" (C.C. Berndt, ed.), pp. 543-549. ASM International, Materials Park, OH, USA.
190. Gross, K. A., Fauchais, P., Vardelle, M., Tikkanen, J., and Keskinen, J. (1997). Vapor-ization and ultra-fine particle generation during the plasma spraying process. In "Thermal Spray: A United Forum for Scientific and Technological Advances" (C.C. Berndt, ed.), pp. 543-549. ASM International, Materials Park, OH, USA.
191. Vardelle, A., Moreau, C., and Fauchais, P. (2000). MRS Bull. 25(7), 32-37.
192. Fauchais, P., Fukumoto, M., Vardelle, A., and Vardelle, M. (2004). J. Therm. Spray Techn. 13(3), 337-360.
193. Clyne, T. W. (1994). Metall. Trans. B15, 369.
194. Clyne, T. W. and Gill, G. C. (1996). J. Therm. Spray Techn. 5, 401.
195. Roberts, K. A. and Clyne, T. W. (1990). Surf. Coat. Techn. 41, 403.
196. Bianchi, L., Leger, A. C., Vardelle, M., Vardelle, A., and Fauchais, P. (1997). Thin Solid Films 305, 35.
197. Bianchi, L., Blein, F., Luchese, P., Grimaud, A., Vardelle, M., and Fauchais, P. (1994). Spreading and solidification of molten droplets under plasma spray conditions. In "Heat and Mass Transfer under Plasma Conditions" (P. Fauchais and J. Amouroux, eds.), pp. 547-556. Begell House, USA.
198. Bianchi, L., Grimaud, A., Blein, F., Luchese, P., and Fauchais, P. (1995). J. Therm. Spray Techn. 4(1), 59.
199. Fukumoto, M., Huang, Y., and Okwatari, M. (1998). Flattening mechanisms in thermal sprayed particle impinging on flat substrate. In "Thermal Spray: Meeting the Challenge of the 21st Century" (C. Coddet, ed.), pp. 401-407. ASM International, Materials Park, OH, USA.
200. Mehdizadeh, N. Z., Chandra, S., and Mostaghimi, J. (2002). Effect of substrate temperature and roughness on coating formation. In "Proceedings of the International Thermal Spray Conference" (E. Lugsheider, ed.), pp. 830-837. DVS, Düsseldorf, Germany.
201. Gougeon, P. and Moreau, C. (2001). J. Therm. Spray Techn. 10(1), 76-82.
202. Leger, A. C., Vardelle, M., Vardelle, A., Fauchais, P., Sampath, S., Berndt, C. C., and Herman, H. (1996). Plasma sprayed zirconia: Relationships between particle parameters, splat formation an deposit generation - part I: Impact and solidification. In "Thermal Spray: Practical Solution for Engineering Problems" (C.C. Berndt, ed.), pp. 623-628. ASM International, Materials Park, OH, USA.
203. Escure, C., Vardelle, M., and Fauchais, P. (2003). Plasma Chem. Plasma Proc. 23(2), 185-222.
204. Cedelle, J., Vardelle, M., and Fauchais, P. (2004). Plasma sprayed zirconia: Relationships between particle parameters, splat formation an deposit generation - part I: Impact and solidification. In "Thermal Spray Proceedings ITSC04," ASM International, Materials Park, OH, USA, CD-ROM.
205. Cedelle, J., Vardelle, M., and Fauchais, P. (in press). Surf. Coat. Techn. 201(3-4), 1373-1382.
206. Armster, S. Q., Delplanque, J.-P., Rein, M., and Lavernia, E. J. (2002). Int. Mater. Rev. 7(6), 265-301.
207. Madejski, J. (1976). Solidification of droplets on a cold surface. International Journal of Heat and Mass Transfer. 19, 1009-1013.
208. Allen, R. F. (1975). J. Colloid Interf. 51, 350.
209. Vardelle, A., Vardelle, M., Fauchais, P., and Gobin, D. (1995). NATO Ser. E Appl. Sci. 282, 95.
210. Wang, S. P., Wang, G. X., and Matthys, E. F. (1998). Int. J. Heat Mass Transfer 41, 1177.
211. Sun, D. W., Xu, J., Zang, H., Wan, Y. P., Prasad, V., and Wang, G. X. (2000). Effect of contact resistance and substrate melting on thermal spray coating. In "Thermal Spray: Surface Engineering via Applied Research" (C.C. Berndt, ed.), pp. 195-201. ASM International, Materials Park, OH, USA.
212. Fauchais, P., Vardelle, M., Vardelle, A., Bianchi, L., and Leger, A. C. (1996). Plasma Chem. Plasma Process. 16(1), 99S.
213. Sobolev, V. V. and Guilemany, J. M. (1999). Part 1, J. Therm. Spray Techn. 8(1), 87.
214. Sobolev, V. V. and Guilemany, J. M. (1999). Part 2, J. Therm. Spray Techn. 8(2), 301.
215. Vardelle, A., Moreau, C., and Fauchais, P. (2000). MRS Bull. July, pp. 32-37.
216. Dykhuizen, R. C. (1994). J. Therm. Spray Techn. 3(4), 351-361.
217. Fauchais, P., Leger, A. C., Vardelle, M., and Vardelle, A. (1997). Formation of plasmasprayed oxide coatings. In "Proceedings of the Julian Szekely Memorial Symposium on Materials Processing" (H.Y. Sohn, J.W. Evans and D. Apelian, eds.), p. 571. TMS, Warrendale, PA.
218. Pasandideh-Fard, M., Bhola, R., Chandra, S., and Mostaghimi, J. (1998). Int. J. Heat Mass Transfer 41, 2929-2945.
219. Robert, C., Denoirjean, A., Vardelle, A., Wang, G. X., and Sampath, S. (1998). Nucleation and phase selection in plasma-sprayed alumina: modelling and experiment. In "Thermal Spray: Meeting the Challenges of the 21st Century" (C. Coddet, ed.), pp. 767-773. ASM International, Materials Park, OH, USA.
220. Pasandideh-Fard, M., Pershin, V., Chandra, S., and Mostaghimi, J. (2002). J. Therm. Spray Techn. 11(2), 206-217.
221. Fukumoto, M., Shiba, M., Haji, H., and Yasui, T. (2005). Pure Appl. Chem. 77(2), 424.
222. Fukumoto, M. and Nishigana, N. E. (2003). Surf. Coat. Techn. 161, 110.
223. Bianchi, L., Denoirjean, A., Blein, F., and Fauchais, P. (1997). Thin Solid Films 299, 125-135.
224. Leger, A. C., Vardelle, M., Vardelle, A., Fauchais, P., Sampath, S., Berndt, C. C., and Hermann, H. (1996). In "Thermal Spray: Practical Solutions for Engineering Problems" (C.C. Berndt, ed.), pp. 623-630. ASM International, Materials Park, OH, USA.
225. Fantassi, S., Vardelle, M., Vardelle, A., and Fauchais, P. (1993). J. Therm. Spray Techn. 2(4), 379.
226. Vardelle, M., Vardelle, A., Leger, A. C., and Fauchais, P. (1994). Dynamics of splat formation and solidification in thermal spraying processes. In "Thermal Spray: Industrial Applications" (C.C. Berndt and S. Sampath, eds.), pp. 555-561. ASM International, Materials Park, OH, USA.
227. Bianchi, L., Blein, F., Lucchese, P., Vardelle, M., Vardelle, A., and Fauchais, P. (1994). Effect of particle velocity and substrate temperature on alumina and zirconia splat formation. In "Thermal Spray: Industrial Applications" (C.C. Berndt and S. Sampath, eds.), pp. 569-576. ASM International, Materials Park, OH, USA.
228. Vardelle, M., Vardelle, A., Leger, A. C., Fauchais, P., and Gobin, D. (1994). J. Therm. Spray Techn. 4(1), 50.
229. Leger, A. C., Vardelle, M., Vardelle, A., Dussoubs, B., and Fauchais, P. (1995). Splat formation: Ceramic particles on ceramic substrate. In "Thermal Spray: Science and Technology" (C.C. Berndt and S. Sampath, eds.), pp. 169-177. ASM International, Materials Park, OH, USA.
230. Vardelle, M., Fauchais, P., Vardelle, A., and Leger, A. C. (1995). Sprayed particles on flat surface. In "Thermal Spraying: Current status and future trends" (A. Ohmori, ed.), pp. 353-358. High Temperature Society of Japan, Osaka, Japan.
231. Moreau, C., Gougeon, P., and Lamontagne, M. (1995). J. Therm. Spray Techn. 4(1), 25.
232. Gougeon, P. and Moreau, C. (1997). Simultaneous independent measurement of splat diameter and cooling time during impact on a substrate of plasma sprayed molybdenum particles. In "Thermal Spray: A United Forum for Scientific and Technological Advances" (C.C. Berndt, ed.), pp. 619-626. ASM International, Materials Park, OH, USA.
233. Chraska, T. and Kinh, A. H. (2002). Surf. Coat. Techn. 157(2-3), 238.
234. Trapaga, G. and Szekely, J. (1991). Metall. Trans. B22, 901.
235. Liu, H., Lavernia, E. J., and Rangel, R. H. (1993). J. Phys. D: Appl. Phys. 26, 1900.
236. Bertagnolli, M., Marchese, M., and Jaccuci, G. (1995). J. Therm. Spray Techn. 4(1), 41.
237. Feng, Z. G., Montavon, G., Feng, Z. Q., Coddet, C., and Domaszewski, M. (1998). Finite elements modeling of liquid particle impacting onto flat substrates. In "Thermal Spray: Meeting the Challenges if the 21st Century" (C. Codddet, ed.), Vol. 1, pp. 395-400. ASM International, Materials Park, OH, USA.
238. Pasandideh-Fard, M. and Mostaghimi, J. (1996). Plasma Chem. Plasma Proc. 16(1), 83S.
239. Montavon, G., Feng, Z. G., Coddet, C., Feng, Z. Q., and Domaszewski, M. (1997). Influence of the spray parameters on the transient pressure within a molten particle impacting onto a flat substrate. In "Thermal Spray: A United Forum for Scientific and Technological Advances" (C.C. Berndt, ed.), pp. 627-633. ASM International, Material Parks, OH, USA.
240. Li, C.-J. and Li, J.-L. (2000). Transient droplet/substrate contact pressure during droplet flattening on flat substrate in plasma spraying. In "Thermal Spray: Surface Engineering via Applied Research" (C.C. Berndt, ed.), p. 777. ASM International, Material Parks, OH, USA.
241. Bussmann, M., Aziz, S. D., Chandra, S., and Mostaghimi, J. (1998). 3D modeling of thermal spray droplet splashing. In "Thermal Spray: Meeting the Challenges of the 21st Century" (C. Coddet, ed.), p. 413. ASM International, Material Parks, OH, USA.
242. Bussmann, M., Mostaghimi, J., and Chandra, S. (1999). Phys. Fluids 11, 1406.
243. Zang, H. (1999). Int. J. Heat Mass Transfer 42, 2499.
244. Aziz, S. and Chandra, S. (2000). Int. J. Heat Mass Transfer 43, 2841.
245. Pasandideh-Fard, M., Mostaghimi, J., and Chandra, S. (2000). Numerical simulation of thermal spray coating formation. In "Thermal Spray: Surface Engineering via Applied Research" (C.C. Berndt, ed.), pp. 125-134. ASM International, Material Parks, OH, USA.
246. Pershin, V., Pasandideh-Fard, M., Mostaghimi, J., and Chandra, S. (2001). Effect of substrate properties on the formation of plasma sprayed alumina splats. In "Thermal Spray 2001: New Surface for a New Millenium" (C.C. Berndt, ed.), pp. 813-820. ASM International, Material Parks, OH, USA.
247. Ghafouri-Azar, R., Shakeri, S., Chandra, S., and Mostaghimi, J. (2002). Numerical simulation of offset deposition for sequential tin droplets. In "Proceedings of the International Thermal Spray Conference Essen 2002" (E. Lugscheider, ed.), pp. 972-978. DVS, Düsseldorf, Germany.
248. Fukumoto, M., Katoh, S., and Okane, I. (1995). Splat behavior of plasma sprayed particles on flat substrate surface. In "Proceedings of the 14th International Thermal Spray Conference," Vol. 1, p. 353. (A. Ohmori, ed.), High Temp. Soc. Japan, Osaka, Japan.
249. Houben, J. M. (1984). Future development in thermal spraying. In "Proceedings of 2nd National Conference on Thermal Spray, 31 October-2 November 1984, Long Beach, CA, USA" (F.N. Longo, ed.). Vol. 1. ASM International, Material Park, OH, USA.
250. Fukumoto, M., Hayashi, H., and Yokoyama, T. (1995). J. Jpn. Therm. Spray Soc. 32(3), 149 (in Japanese).
251. Sakakibara, N., Tsukuda, H., and Notomi, A. (2000). The splat morphology of plasma sprayed particle and the relation to coating property. In "Thermal Spray: Surface Engineering via Applied Research" (C.C. Berndt, ed.), pp. 753-758. ASM International, Materials Park, OH, USA.
252. Fauchais, P., Vardelle, M., Vardelle, A., and Bianchi, L. (1996). Ceram. Int. 22, 295.
253. Pershin, L., Lufitha, M., Chandra, S., and Mostaghimi, J. (2001). In "15th International Symposium on Plasma Chemistry" (A. Bouchoule, J.M. Pouvesle, A.L. Thomann, J.M. Bauchire and E. Robert, eds.), Vol. 6, p. 2633. GREMI, CNRS, University of Orlóans, France.
254. Fukumoto, F. (2004). Particle Flattening Behavior, Thermal Spray Course, held in conjunction with ITSC 2004, Osaka, Japan, edited by J. Heberlein, University of Minnesota, MN, USA.
255. Denoirjean, A., Grimaud, A., Fauchais, P., Tristant, P., Tixier, C., and Desmaison, J. (1998). Splat formation first step of multitechnique deposition plasma spraying and microwave plasma enhanced CVC. In "Thermal Spray: Meeting in Challenges of the 21st Century" (C. Coddet, ed.), Vol. 2, pp. 1369-1374. ASM International, Materials Park, OH, USA.
256. Tanaka, Y. and Fukumoto, M. (1999). Surf. Coat. Techn. 120-121, 124.
257. Cedelle, J., Vardelle, M., Pateyron, B., and Fauchais, P. (2004). Experimental investigation of the splashing processes at impact in plasma sprayed coating formation. In "Proceedings of the International Thermal Spray Conference," pp. 1008-1013, Osaka, Japan and DVS Düsseldorf, Germany (electronic version).
258. Cedelle, J., Vardelle, M., Pateyron, B., Fauchais, P., Fukumoto, M., and Ohgitani, I. (2005). Plasma sprayed particles: impact imaging and flattening particle thermal history, to be published in International Thermal Spray Conference Basel, Switzerland, May.
259. Fukumoto, M. and Huang, Y. (1999). J. Therm. Spray Techn. 8(3), 427.
260. Safai, S. and Herman, H. (1977). Thin Solid Films 45, 295.
261. Sampath, S. and Herman, H. (1996). J. Therm. Spray Techn. 5(4), 445.
262. Inada, S. and Yang, W. J. (1994). Exp. Heat Transfer 7(2), 93.
263. Fukumoto, M., Nishioka, E., and Matsubara, T. (2000). Effect of interface wetting on flattening of freely fallen metal droplet onto flat substrate surface. In "Thermal Spray: Surface Engineering via Applied Research" (C.C. Berndt, ed.), pp. 797-802. ASM International, Materials Park, OH, USA.
264. Fukumoto, M., Nishiyama, T., and Nishioka, E. (2002). Effect of surface morphology of substrate on flattening behavior of freely fallen metal droplet. In "Proceedings of the International Thermal Spray Conference Essen 2002" (E. Lugscheider, ed.), pp. 37-41. DVS, Düsseldorf, Germany.
265. Fukumoto, M., Huang, Y., and Ohwatari, M. (1998). Flattening mechanisms in thermal sprayed particle impinging on flat substrate. In "Thermal Spray: Meeting the Challenge of the 21st Century" (C. Coddet, ed.), pp. 401-406. ASM International, Materials Park, OH, USA.
266. Fukumoto, M., Nishioka, E., and Nishiyama, T. (2001). Proposal of new criterion for splashing of thermal sprayed particle onto flat substrate surface. In "Thermal Spray 2001, New Surface for a New Millenium" (C.C. Berndt, K.A. Khor and E.F. Lugscheider, eds.), pp. 841-848. ASM International, Materials Park, OH, USA.
267. Mostaghimi, J., Fard, M. P., and Chandra, S. (2002). Plasma Chem. Plasma Proc. 22(1), 59.
268. Huang, Y., Ohwatari, M., and Fukumoto, M. (1996). Effect of substrate material on flattening behavior of plasma sprayed Ni particles. In "Proceedings of the 6th International Symposium of the Japanese Welding Society, pp. 731-736, Japan Welding Society, Osaka, Japan.
269. Tanaka, Y. and Fukumoto, M. (2001). Int. J. Mater. Product Technol. (special issue, SPM1), 518.
270. Fukumoto, M., Nishioka, E., and Matsubara, T. (1999). Surf. Coat. Techn. 120-121, 131.
271. Nishioka, E., Matsubara, T., and Fukumoto, M. (2001). Int. J. Mater. Product Technol. (special issue, SPM1), 700.
272. Montavon, G., Sampath, S., Berndt, C. C., Herman, H., and Coddet, C. (1995). Effect J. Therm. Spray Techn. 4(1), 67.
273. Vardelle, A., Themelis, N. J., Vardelle, M., and Fauchais, P. (1997). J. High Temp. Mater. Proc. 1(3), 295.
274. Nogi, K., Iwamoto, N., and Ogino, K. (1992). Bull. Japan Inst. Metals 31(4), 278.
275. Li, C.-J., Li, J.-L., and Wang, W. B. (1998). The effect of substrate preheating and surface organic covering on splat formation. In "Thermal Spray: Meeting the Challenges of the 21st Century" (C. Coddett, ed.), pp. 473-480. ASM International, Materials Park, OH, USA.
276. Li, C.-J., Li, J.-L., Wang, W. B., Fu, A.-J., and Ohmori, A. (1999). A mechanism of the splashing during droplet splatting in thermal spraying. In "Thermal Spraying in United Spray Conference Proceedings Düsseldorf 1999" (E. Lugscheider and P.A. Kammer, eds.), pp. 530-535. DVS, Düsseldorf, Germany.
277. Jiang, X. Y., Wan, Y. P., Wang, X. Y., Zhang, H., Goswami, R., Herman, H., and Sampath, S. (2000). Investigation of splat/substrate contact during molybdenum thermal spraying. In "Thermal Spray: Surface Engineering via Applied Research" (C.C. Berndt, ed.), pp. 729-736. ASM International, Materials Park, OH, USA.
278. Jiang, X., Wan, Y., Herman, H., and Sampath, S. (2001). Thin Select Films 385(1-2), 132.
279. Suganuma, K. (1990). Bull. Japan Inst. Metals 29(11), 882.
280. Stout, K. J. and King, T. G. (1977). Wear 43, 99.
281. Cedelle, J. (2005). Study of the Formation of Lamellae Resulting from the Impact of Millimeter and Micrometer Sized Droplets: Application to Coating Manufacturing by Plasma Spraying, Ph.D. Thesis (in French), University of Limoges, October.
282. Fukumoto, M., Ohgituni, I., and Yasui, T. (2004). Mater. Transfer 45(6), 1869.
283. Sobolev, V. V., Guilemany, J. M., and Martin, A. J. (1996). J. Therm. Spray Techn. 5(2), 207.
284. Fukanuma, H. (1996). Mathematical modeling of flattening process on rough surfaces in thermal spray. In "Thermal Spray: Practical Solutions for Engineering Problems" (C.C. Berndt, ed.), pp. 647-656. ASM International, Materials Park, OH, USA.
285. Fukanuma, H., Xie, R., Oo, N., Fujiwara, J. Y., and Kuroda, S. (2002). Characterization of roughened substrate surface on bond strength of thermal spray deposits. In "International Thermal Spray Conference Proceedings" (E. Lugscheider, ed.), pp. 312-317. DVS, Düsseldorf, Germany.
286. Guessasma, S., Montavon, G., Coddet, C., Mancini, C., and Berndt, C. C. (2002). Fractal dimension as an indicator of thermal spray coatings roughness. In "Proceedings of the International Thermal Spray Conference" (E. Lugscheider, ed.), pp. 949-953. DVS, Düsseldorf, Germany.
287. Raessi, M., Mostaghimi, J., and Bussmann, M. (2005). Droplet impact during the plasma spray coating process-Effect of substrate roughness on splat shapes. In "ISPC 17 Proceedings" (J. Mostaghimi et al. eds.), University of Toronto, Canada (electronic version).
288. Pasandideh-Fard, M., Chandra, S., and Mostaghimi, J. (2002). Int. J. Heat Mass Transfer 45, 2229-2242.
289. Sobolev, V. V. and Guilemany, M. (1998). Droplet flattening during thermal spraying at off-normal angles. In "Thermal Spray: Meeting the Challenges of the 21st Century" (C.C. Coddet, ed.), pp. 497-502. ASM International, Materials Park, OH, USA.
290. Montavon, G., Sampath, S., Berndt, C. C., Herman, H., and Coddet, C. (1997). Surf. Coat. Techn. 91, 107.
291. Kanouff, M. P., Neiser, R. A., Jr., and Roemer, T. J. (1998). J. Therm. Spray Techn. 7, 219.
292. Fukanuma, H. and Huang, Y. (2000). Splat formation in off-normal angle spray. In "Thermal Spray: Surface Engineering via Applied Research" (C.C. Berndt, ed.), pp. 767-776. ASM International, Materials Park, OH, USA.
293. Fukanuma, H. and Li, C.-J. (1999). Mathematical modeling of splat formation at offnormal angles in thermal spray. In "United Spray Conference Proceedings Düsseldorf" (E. Lugscheider and P.A. Kammer, eds.), pp. 513-518. DVS, Düsseldorf, Germany.
294. Bussmann, M., Chandra, S., and Mostaghimi, J. (1999). Numerical results of off-angle thermal spray particle impact. In "ITSC99 Proceedings" (E. Lugscheider and P. Kamnaer, eds.), pp. 783-786. DVS, Düsseldorf, Germany.
295. Leigh, S. H. and Berndt, C. C. (1997). Surf. Coat. Techn. 89, 213.
296. Cedelle, J., Vardelle, M., Pateyron, B., and Fauchais, P. (2004). J. High Temp. Mater. Process. 8(3), 353.
297. Mundo, C., Sommerfeld, M., and Tropea, C. (1995). Int. J. Multiphas Flow 21, 151.
298. Stow, C. D. and Hadfield, M. G. (1981). Proc. R. Soc. London A373, 419.
299. Fukumoto, M. and Huang, Y. (1999). J. Therm. Spray Techn. 8(3), 427.
300. Liu, W., Wang, G. X., and Matthys, E. F. (1995). Int. J. Heat Mass Transfer 38(8), 1387.
301. Hofmeister, W. and Bayuzick, R.J. (1998). Solidification. In "The Minerals, Metals and Materials Society" (S.P. Marsh et al. eds.), p. 375. Warrendale, PA.
302. Bennett, T. and Poulikakos, D. (1994). J. Mater. Sci. 29, 2025-2029.
303. Li, C.-J., Li, J.-L., Wang, W.-B., Ohmori, A., and Tani, K. (1998). Effect of particle-substrate materials combinations on morphology of plasma sprayed splats. In "Thermal Spray: Meeting the Challenges of the 21st Millenium" (C. Coddet, ed.), p. 481. ASM International, Materials Park, OH, USA.
304. Haddadi, A., Nardou, F., Grimaud, A., and Fauchais, P. (1995). Generation of the first layers of a zirconia plasma sprayed coating: Correlation between splat layering and spraying parameters. In "Thermal Spray: Science and Technology" (C.C. Berndt and S. Sampath, eds.), pp. 249-254. ASM International, Materials Park, OH, USA.
305. Smith, M. F., Neiser, R. A., and Dykhuisen, R. C. (1994). An investigation of the effects of droplet impact angle in thermal spray deposition. In "Thermal Spray: Industrial Applications" (C.C. Berndt and S. Sampath, eds.), pp. 603-608. ASM International, Materials Park, OH, USA.
306. Siegmann, S. D. and Brown, C. A. (1998). In "Thermal Spray: Meeting Challenges of the 21st Century" (C.C. Coddet, ed.), p. 831. ASM International, Materials Park, OH, USA.
307. Amada, S., Yamada, H., Yematsu, S., and Saotome, Y. (1992). In "Thermal Spray: International advances in Coatings Technology" (C.C. Berndt, ed.), p. 915. ASM International, Materials Park, OH, USA.
308. Matsubara, Y. and Tomiguchi, A. (1992). Surface texture and adhesive strength of high velocity oxy-fuel sprayed coatings for rolls of steel mills. In "Thermal Spray: International Advances in Coatings Technology" (C.C. Berndt, ed.), pp. 637-641. ASM International, Materials Park, OH, USA.
309. Llorca-Isern, N., Gemma Bertran Vidal, Jorba, J., Bianchi, L., and Sanchez, D. (2001). Estimation of three-dimensional connectivity of internal defects in coatings using fractal analysis. J. Therm. Spray Techn. 10(2), 287-292.
310. Fukumoto, M., Ohgitani, I., and Yasni, T. (2004). Mater. Trans. 45(6), 1869.
311. Maître, A., Denoirjean, A., Fauchais, P., and Lefort, P. (2002). Phys. Chem. Chem. Phys. 15(4), 3887.
312. Valette, S., Denoirjean, A., Lefort, P., and Fauchais, P. (2003). J. High Temp. Mater. Process. 7(2), 195.
313. Pech, J., Hannoyer, B., Lagnoux, O., Denoirjean, A., and Fauchais, P. (1999). In "Progress in Plasma Processing of Materials" (P. Fauchais and J. Amouroux, eds.), p. 543. Begell House, New York.
314. Valette, S., Denoirjean, A., Soulestin, B., Trolliard, G., Hannoyer, B., Lefort, P., and Fauchais, P. (2004). Alumina coatings on preoxidized low carbon steel. Interfacial phenomena between alumina and iron oxide layer. In "Proceedings of the International Thermal Spray Conference," Osaka, DVS Düsseldorf, Germany (electronic version).
315. Haure, T. (2003). Multifunctional layers by PACVD and Plasma Spraying, Ph.D. Thesis, University of Limoges, France, 14 November.
316. Espié, G., Fauchais, P., Hannoyer, B., Labbe, J. C., and Vardelle, A. (1999). In "Heat and Mass Transfer under Plasma Conditions during the APS on the Wettability" (P. Fauchais, et al., eds.), Vol. 891, p. 143. N.Y. Academy of Sciences, NY, USA.
317. Seyed, A. A., Denoirjean, P., Denoirjean, A., Hannoyer, B., Labbe, J. C., and Fauchais, P. (2000). In "Progress in Plasma Processing of Materials" (P. Fauchais, ed.), p. 465. Begell House, NY, USA.
318. Pech, J., Hannoyer, B., Denoirjean, A., Bianchi, L., and Fauchais, P. (1999). Influence of substrate preheating monitoring on alumina splat formation in d.c. plasma processes. In "Thermal Spray: A United Forum for Scientific and Technological Advances" (C.C. Berndt, ed.), pp. 759-765. ASM International, Materials Park, OH, USA.
319. Pech., J., Hannoyer, B., Lagnoux, O., Denoirjean, A., and Fauchais, P. (1999). Influence of preheating parameters on the plasma jet oxidation of a low-carbon steel. Progress in Plasma Processing of Materials, (P. Fauchais and J. Amouroux, eds.), pp. 543-554. Pub. Begell House, NY, USA.
320. Thermal spraying: Practice, theory and application, prepared by AWS Committee on Thermal Spray (1999). American Welding Society, Miami, FL, USA, pp. 2-15.
321. Haure, T., Denoirjean, A., Tristant, P., Hidalgo, H., Leniniven, C., Desmaison, J., and Fauchais, P. (2001). In "Thermal Spray 2001: New Surfaces for a New Millenium" (C.C. Berndt, K.A. Khor and E. Lugscheider, eds.), p. 613. ASM International, Materials Park, OH, USA.
322. Valette, S. (2004). Influence of the Preoxidation of a Steel Substrate on the Adhesion of an Alumina Coating d.c. Plasma Sprayed, Ph.D. Thesis, University of Limoges, 30 November.
323. Zanchetta, A., Lefort, P., and Gabbay, E. (1995). J. Eur. Ceram. Soc. 15, 238.
324. Haddadi, A., Grimaud, A., Denoirjean, A., Nardou, F., and Fauchais, P. (1996). In "Thermal Spray: Practical Solutions for Engineering Problems" (C.C. Berndt, ed.), p. 615. ASM International, Materials Park, OH, USA.
325. Ghafouri-Azar, R., Mostaghimi, J., and Chandra, S. (2001). Deposition model of thermal spray coatings. In "Thermal Spray: New Surfaces for a New Millenium" (C.C. Berndt, K.A. Khor and E. Lugscheider, eds.), pp. 951-958. ASM International, Materials Park, OH, USA.
326. Kuroda, S., Dendo, T., and Kitahara, S. (1995). Quenching stress in plasma sprayed coatings and its correlation with the deposit microstructure. J. Therm. Spray Technol. 4(1), 75-84.
327. Vardelle, M. and Fauchais, P. (1999). Pure Appl. Chem. 1(10), 1909-1916.
328. Moreau, C. (1998). In "Thermal Spray: Meeting the Challenges of the 21st Century" (C. Coddet, ed.), pp. 1681-1696. ASM International, Materials Park, OH, USA.
329. Moreau, C., Bisson, J.-F., Lima, R. S., and Marple, B. R. (2005). Diagnostics for advanced materials processing by plasma spraying. Pure App. Chem. 77(2), 443-462.
330. Leblanc, L. and Moreau, C. (2001). Optimization and process control for high performance thermal spray coatings. J. Therm. Spray Technol. 11(3), 27-57.
331. Hansbo, A. and Nylen, P. (1999). Surf. Coat. Technol. 122(2-3), 190-200.
332. Remesh, K., Ng, H. W., and Yu, S. C. M. (2003). J. Therm. Spray Technol. 12(3), 377-392.
333. Ghafouri-Azar, R., Mostaghimi, J., Chandra, S., and Charuschi, M. (2003). J. Therm. Spray Technol. 12(2), 53-69.
334. Xue, M., Mostaghimi, J., and Chandra, S. (2004). In "ITSC04 Proceedings," Osaka, Japan, DVS Düsseldorf, Germany (electronic version).
335. Herman, H. (1988). Sci. Am. 9(256), 112-118.
336. Kuroda, S., Dendo, T., and Kitahara, S. (1995). J. Therm. Spray Technol. 4(1), 75-84.
337. Ilavsky, J., Berndt, C. C., and Karthikeyan, J. (1997). J. Mater. Sci. 32, 3925-3932.
338. Cesar, M. G. M. M., Vasconcelos, D. C. L., and Vasconcelos, W. L. (2002). J. Mater. Sci. 37, 2323-2329.
339. Poulain, M., Ph.D. Thesis (in French), Paris-Sud University (U.F.R. d'Orsay), France, 1999
340. Underwood, E. E. (1969). Stereology, or the quantitative evaluation of microstructures. J. Microsc. 89(2), 161-180.
341. Zhang, J. and Desai, V. (2005). Surf. Coat. Technol. 190(1), 98-109.
342. Jayaraj, B., Desai, V. H., Lee, C. K., and Sohn, Y. H. (2004). Electrochemical impedance spectroscopy of porous ZrO2-8 wt.% Y2O3 and thermally grown oxide on nickel aluminide. Mater. Sci. Eng. A372(1-2), 278-286.