Adaptive speed control for permanent-magnet synchronous motor system with variations of load inertia

IEEE Transactions on Industrial Electronics

Volumn 56, Issue 8, 2009, Pages 3050-3059

  Li, Shihua ^a   Liu, Zhigang ^b  

^a SOUTHEAST UNIVERSITY   (China)

^b HUAWEI TECHNOLOGIES CO LTD   (China)

Author keywords

Adaptive control; Extended state observer (ESO); Fuzzy inferencer; Inertia identification; Permanent magnet synchronous motor (PMSM); Speed regulation

Indexed keywords

ADAPTIVE CONTROL; EXTENDED STATE OBSERVER (ESO); FUZZY INFERENCER; INERTIA IDENTIFICATION; PERMANENT-MAGNET SYNCHRONOUS MOTOR (PMSM); SPEED REGULATION;

AC MOTORS; ADAPTIVE CONTROL SYSTEMS; CONTROL THEORY; MOTORS; PERMANENT MAGNETS; SPEED; SPEED CONTROL; STATE ESTIMATION;

SYNCHRONOUS MOTORS;

EID: 68449086235     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2024655     Document Type: Article

References (49)

1. I. Awaya, Y. Kato, I. Miyake, and M. Ito, "New motion control with inertia identification function using disturbance observer," in Proc. Power Electron. Motion Control Conf., 1992, pp. 77-81.
2. J. Back and H. Shim, "Adding robustness to nominal output-feedback controllers for uncertain nonlinear systems: A nonlinear version of disturbance observer," Automatica, vol. 44, no. 10, pp. 2528-2537, Oct. 2008.
3. I. C. Baik, K.-H. Kim, and M. J. Youn, "Robust nonlinear speed control of PM synchronous motor using boundary layer integral sliding mode control technique," IEEE Trans. Control Syst. Technol., vol. 8, no. 1, pp. 47-54, Jan. 2000.
4. F. Blaschke, "The principle of field orientation as applied to the new transvector closed loop control for rotating machine," Siemens Rev. vol. 39, no. 5, pp. 217-220, 1972.
5. W.-H. Chen, D. J. Ballance, P. J. Gawthrop, J. J. Gribble, and J. O'Reilly, "Nonlinear disturbance observer for two-link robotic manipulators," IEEE Trans. Ind. Electron., vol. 47, no. 4, pp. 932-938, Aug. 2000.
6. W.-H. Chen, "Nonlinear disturbance observer enhanced dynamic inversion control of missiles," J. Guid. Control Dyn., vol. 26, no. 1, pp. 161-166, Jan./Feb. 2003.
7. W.-H. Chen, "Disturbance observer based control for nonlinear systems," IEEE/ASME Trans. Mechatronics, vol. 9, no. 4, pp. 706-710, Dec. 2004.
8. X. Chen, S. Komada, and T. Fukuda, "Design of a nonlinear disturbance observer," IEEE Trans. Ind. Electron., vol. 47, no. 2, pp. 429-437, Apr. 2000.
9. J. W. Choi, S. C. Lee, and H. G. Kim, "Inertia identification algorithm for high-performance speed control of electric motors," Proc. Inst. Elect. Eng. - Electr. Power Appl., vol. 153, no. 3, pp. 379-386, May 2006.
10. G. Feng, L. Huang, and Y.-F. Liu, "A new robust algorithm to improve the dynamic performance on the speed control of induction motor drive," IEEE Trans. Power Electron., vol. 19, no. 6, pp. 1614-1627, Nov. 2004.
11. K. Fujita and K. Sado, "Instantaneous speed detection with parameter identification for AC servo system," IEEE Trans. Ind. Appl., vol. 28, no. 4, pp. 864-872, Jul./Aug. 1992.
12. B. Grcar, P. Cafuta, M. Znidaric, and F. Gausch, "Nonlinear control of synchronous servo drive," IEEE Trans. Control Syst. Technol., vol. 4, no. 2, pp. 177-184, Mar. 1996.
13. L. Guo and W. H. Chen, "Disturbance attenuation and rejection for a class of nonlinear systems via DOBC approach," Int. J. Robust Nonlinear Control, vol. 15, no. 3, pp. 109-125, Feb. 2005.
14. Y. J. Guo, L. P. Huang, Y. Qiu, and M. Muramatsu, "Inertia identification and auto-tuning of Induction motor using MARS," in Proc. Power Electron. Motion Control Conf., 2000, pp. 1006-1011.
15. J. Q. Han, "The extended state observer of a class of uncertain systems," Control Decision, vol. 10, no. 1, pp. 85-88, 1995, (in Chinese).
16. J. Q. Han, "From PID to active disturbance rejection control," IEEE Trans. Ind. Electron., vol. 56, no. 3, pp. 900-906, Mar. 2009.
17. T.-L. Hsien, Y.-Y. Sun, and M.-C. Tsai, "H∞ control for a sensorless permanent-magnet synchronous drive," Proc. Inst. Elect. Eng. - Electr. Power Appl., vol. 144, no. 3, pp. 173-181, May 1997.
18. H. Z. Jin and J. M. Lee, "An RMRAC current regulator for permanent-magnet synchronous motor based on statistical model interpretation," IEEE Trans. Ind. Electron., vol. 56, no. 1, pp. 169-177, Jan. 2009.
19. E. Kim, "A fuzzy disturbance observer and its application to control," IEEE Trans. Fuzzy Syst., vol. 10, no. 1, pp. 77-84, Feb. 2002.
20. K. H. Kim, I. C. Baik, G.-W. Moon, and M.-J. Youn, "A current control for a permanent magnet synchronous motor with a simple disturbance estimation scheme," IEEE Trans. Control Syst. Technol., vol. 7, no. 5, pp. 630-633, Sep. 1999.
21. K. H. Kim and M.-J. Youn, "A nonlinear speed control for a PM synchronous motor using a simple disturbance estimation technique," IEEE Trans. Ind. Electron., vol. 49, no. 3, pp. 524-535, Jun. 2002.
22. J.-S. Ko and B.-M. Han, "Precision position control of PMSM using neural network disturbance observer on forced nominal plant," in Proc. IEEE Int. Conf. Mechatronics, 2006, pp. 316-320.
23. H. Kobayashi, S. Katsura, and K. Ohnishi, "An analysis of parameter variations of disturbance observer for motion control," IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 3413-3421, Dec. 2007.
24. B. Kosko, NN and Fuzzy System: A Dynamical Systems Approach to Machine Intelligence. Englewood Cliffs, NJ: Prentice-Hall, 1992.
25. P. C. Krause, Analysis of Electric Machinery, 2nd ed. New York: McGraw-Hill, 1995.
26. Y.-S. Kung and M.-H. Tsai, "FPGA-based speed control IC for PMSM drive with adaptive fuzzy control," IEEE Trans. Power Electron., vol. 22, no. 6, pp. 2476-2486, Nov. 2007.
27. H. S. Lee and M. Tomizuka, "Robust motion controller design for high-accuracy positioning systems," IEEE Trans. Ind. Electron., vol. 43, no. 1, pp. 48-55, Feb. 1996.
28. F.-J. Lin, P.-H. Chou, and Y.-S. Kung, "Robust fuzzy neural network controller with nonlinear disturbance observer for two-axis motion control system," IET Control Theory Appl., vol. 2, no. 2, pp. 151-167, Feb. 2008.
29. Z. G. Liu and S. H. Li, "Active disturbance rejection controller based on PMSM model identification and compensation," Proc. Chin. Soc. Elect. Eng., vol. 28, no. 24, pp. 118-123, 2008, (in Chinese).
30. R. Miklosovic and Z. Q. Gao, "A robust two-degree-of-freedom control design technique and its practical application," in Conf. Rec. 39th IEEE IAS Annu. Meeting, 2004, pp. 1495-1502.
31. Y. A.-R. I. Mohamed, "Design and implementation of a robust current-control scheme for a PMSM vector drive with a simple adaptive disturbance observer," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1981-1988, Aug. 2007.
32. Y. A.-R. I. Mohamed and E. F. El-Saadany, "A current control scheme with an adaptive internal model for torque ripple minimization and robust current regulation in PMSM drive systems," IEEE Trans. Energy Convers., vol. 23, no. 1, pp. 92-100, Mar. 2008.
33. K. Ohnishi, "A new servo method in mechatronics," Trans. Jpn. Soc. Elect. Eng., vol. 107-D, pp. 83-86, 1987.
34. J. F. Pan, N. C. Cheung, and J. M. Yang, "Auto-disturbance rejection controller for novel planar switched reluctance motor," Proc. Inst. Elect. Eng. - Electr. Power Appl., vol. 153, no. 2, pp. 307-316, Mar. 2006.
35. J. Su, W. Qiu, H. Ma, and P.-Y. Woo, "Calibration-free robotic eye-hand coordination based on an auto disturbance-rejection controller," IEEE Trans. Robot., vol. 20, no. 5, pp. 899-907, Oct. 2004.
36. Y. X. Su, B. Y. Duan, C. H. Zheng, Y. F. Zhang, G. D. Chen, and J. W. Mi, "Disturbance-rejection high-precision motion control of a Stewart platform," IEEE Trans. Control Syst. Technol., vol. 12, no. 3, pp. 364-374, May 2004.
37. Y. X. Su, C. H. Zheng, and B. Y. Duan, "Automatic disturbances rejection controller for precise motion control of permanent-magnet synchronous motors," IEEE Trans. Ind. Electron., vol. 52, no. 3, pp. 814-823, Jun. 2005.
38. B. Sun and Z. Gao, "A DSP-based active disturbance rejection control design for a 1-kW H-bridge DC-DC power converter," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1271-1277, Oct. 2005.
39. D. Sun, "Comments on active disturbance rejection control," IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 3428-3429, Dec. 2007.
40. T. Umeno and Y. Hori, "Robust speed control of DC servomotors using modern two degrees-of-freedom controller design," IEEE Trans. Ind. Electron., vol. 38, no. 5, pp. 363-368, Oct. 1991.
41. D. M. Vilathgamuwa, M. A. Rahman, K. Tseng, and M. N. Uddin, "Non-linear control of interior permanent magnet synchronous motor," IEEE Trans. Ind. Appl., vol. 39, no. 2, pp. 408-416, Mar./Apr. 2003.
42. R. J.Wai, "Total sliding-mode controller for PMsynchronous servo motor drive using recurrent fuzzy neural network," IEEE Trans. Ind. Electron., vol. 48, no. 5, pp. 926-944, Oct. 2001.
43. G. J. Wang, C. T. Fong, and K. J. Chang, "Neural-network-based self tuning PI controller for precise motion control of PMAC motors," IEEE Trans. Ind. Electron., vol. 48, no. 2, pp. 408-415, Apr. 2001.
44. M. T. White, M. Tomizuka, and C. Smith, "Improved track following in magnetic disk drives using a disturbance observer," IEEE/ASME Trans. Mechatronics, vol. 5, no. 1, pp. 3-11, Mar. 2000.
45. D. Wu, K. Chen, and X. Wang, "Tracking control and active disturbance rejection with application to noncircular machining," Int. J. Mach. Tools Manufacture, vol. 47, no. 15, pp. 2207-2217, Dec. 2007.
46. S. M. Yang and Y. J. Deng, "Observer-based inertia identification for autotuning servo motor drives," in Conf. Rec. 40th IEEE IAS Annu. Meeting, 2005, pp. 968-972.
47. L. Zadeh, "Outline of a new approach to the analysis of complex systems and decision processes," IEEE Trans. Syst., Man, Cybern., vol. SMC-3, no. 1, pp. 28-44, Jan. 1973.
48. B. Zhang, Y. Li, and Y. S. Zuo, "A DSP-based fully digital PMSM servo driving using on-line self-tuning PI controller," in Proc. 3rd Power Electron. Motion Control Conf., 2000, pp. 1012-1017.
49. J. Zhou and Y. Wang, "Adaptive backstepping speed controller design for a permanent magnet synchronous motor," Proc. Inst. Elect. Eng. - Electr. Power Appl., vol. 149, no. 2, pp. 165-172, Mar. 2002.