Soot processes in compression ignition engines

Progress in Energy and Combustion Science

Volumn 33, Issue 3, 2007, Pages 272-309

  Tree, Dale R ^a   Svensson, Kenth I ^b  

^a BRIGHAM YOUNG UNIVERSITY   (United States)

^b VOLVO AERO CORPORATION   (Sweden)

Author keywords

Diesel engines; Oxygenated fuels; Particulate; Soot

Indexed keywords

AIR ENTRAINMENT; COMBUSTION; DIESEL ENGINES; NITROGEN OXIDES; PARTICULATE EMISSIONS; SOOT;

DIESEL COMBUSTION; DIESEL ENGINE COMBUSTION; IN-CYLINDER SOOT; OXYGENATED FUELS;

IGNITION SYSTEMS;

EID: 33947246575     PISSN: 03601285     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pecs.2006.03.002     Document Type: Review

References (203)

1. Smith O.I. Fundamentals of soot formation in flames with application to diesel engine particulate emissions. Prog Energy Combust Sci 7 (1981) 275-291
2. Haynes B.S.a.H.G.G.W. Soot formation. Prog Energy Combust Sci 7 (1981) 229-273
3. Palmer HB, Cullis CF. In: Walker PL, editor. Chemistry and physics of carbon, the formation of carbon from gases. 1965.
4. Glassman I. Soot formation in combustion processes. In: Proceedings of the 22nd international symposium on combustion. The Combustion Institute, 1988. p. 295-311.
5. Choi M.Y., Hamins A., Mulholland G.W., and Kashiwagi T. Simultaneous optical measurement of soot volume fraction and temperature in premixed flames. Combust Flame 99 (1994) 174-186
6. Ullman TL. Investigation of the effects of fuel composition on heavy-duty diesel engine emissions. SAE Paper 892072, 1989.
7. Lee R, Pedley J, Hobbs C. Fuel quality impact on heavy duty diesel emissions-a literature review. SAE Paper 982649, 1998.
8. Combustion (1996), Academic Press, San Diego
9. In: Bartok W., and Sarofim A.F. (Eds) (1991), Wiley, New York
10. Bryce D., Ladommatos N., Xiao Z., and Zhao H. Investigating the effect of oxygenated and aromatic compounds in fuel by comparing laser soot measurements in laminar diffusion flames with diesel-engine emissions. J Inst Energy 72 (1999) 150-156
11. Lee KO, Cole R, Sekar R, Choi MY, Zhu J, Kang J, Bae C. Detailed characterization of morphology and dimensions of diesel particulates via thermophoretic sampling. SAE Paper 2001-01-3572, 2001.
12. Bruce C.W., Stromberg T.F., Gurton K.P., and Mozer J.B. Trans-spectral absorption and scattering of electromagnetic radiation by diesel soot. Appl Opt-LP 30 12 (1991) 1537-1546
13. Tree DR, Foster DE. Optical measurements of soot particle size, number density, and temperature in a direct injection diesel engine as a function of speed and load. SAE Paper 940270, 1994.
14. Pinson JA, Ni T, Litzinger TA. Quantitative imaging study of the effects of intake air temperature on soot evolution in an optically-accessible D.I. diesel engine. SAE Paper 942044, 1994.
15. Ladommatos N, Zhao H. A guide to measurement of flame temperature and soot concentration in diesel engines using the two-colour method. Part 1: principles. SAE Paper 941956, 1994.
16. Hiroyasu H, Kadota T. models for combustion and formation of nitric oxide and soot in DI diesel engines. SAE Paper 760129, 1976.
17. Nagel J, Strickland-Constable. Oxidation of carbon between 1000 and 2000 C. In: Proceedings of the fifth conference on carbon, 1962. p. 154.
18. Vander Wal R.L. Soot oxidation: dependence upon initial nanostructure. Combust Flame 134 1-2 (2003) 1-9
19. Liu Y, Tao F, Foster DE, Reitz RD. Application of a multiple-step phenomenological soot model to HSDI diesel multiple injection modeling. SAE Paper 2005-01-0924, 2005.
20. Fusco A, Knox-Kelecy A, Foster DE. Application of a phenomenological soot model to diesel engine combustion. In: Proceedings of the third international symposium on diagnostics and modeling of combustion in internal combusiton engines, 1994.
21. Daly DT, Nag P. Combustion modeling of soot reduction in diesel and alternative fuels using chemkin. SAE Paper 2001-01-1239, 2001.
22. Westbrook C.K., and Dryer F.L. Chemical kinetics modeling of hydrocarbon combustion. Prog Energy Combust Sci 10 (1984) 1-57
23. Flynn PF, Durrett RP, zur Loye AO, Akinyemi OC, Dec JE, Westbrook CK. Diesel combustion: an integrated view combining laser diagnostics, chemical kinetics, and empirical validation. SAE Paper 1999-01-0509, 1999.
24. Westbrook C.K., Pitz W.J., Boercker J.E., Curran H.J., Griffiths J.F., Mohammed C., et al. Detailed chemical kinetic reaction mechanisms for autoignition of isomers of heptane under rapid compression. Proc Combust Inst 29 1 (2002) 1311-1318
25. Curran H.J., Pitz W.J., Westbrook C.K.C.V.C., and Dryer F.L. Oxidation of automotive primary reference fuels at elevated pressures. Proc Combust Inst 27 1 (1998) 379-387
26. Curran H.J., Gaffuri P., Pitz W.J., and Westbrook C.K. A comprehensive modeling study of iso-octane oxidation. Combust Flame 129 3 (2002) 253-280
27. Ranzi E., Sogaro A., Gaffuri P., Pennati G., Westbrook C.K., and Pitz W.J. New comprehensive reaction mechanism for combustion of hydrocarbon fuels. Combust Flame 99 2 (1994) 201-211
28. Frenklach M, Wang H. In: Bockhorn H, editor. Mechanisms and models in soot formation in combustion. Heidelberg: Springer; 1994.
29. 2 hydrocarbons. Combust Flame 121 (2000) 122-136
30. Sato H, Tree DR, Hodges JT, Foster DE. A study on the effect of temperature on soot formation in a jet stirred reactor. In: Proceedings of the 23rd international symposium on combustion. The Combustion Institute; 1990. p. 1469-75.
31. Böhm H, Hesse D, Jander H, Lüers B, Pietscher J, Wagner HG, et al. The influence of pressure and temperature on soot formation in premixed flames. 22nd international symposium on combustion. The Combustion Institute; 1988. p. 403-11.
32. Flower W.L. Laser diagnostic techniques used to measure soot formation. Appl Opt 24 8 (1985) 1101
33. Flower WL. An investigation of soot formation in axisymmetric turbulent diffusion flames at elevated pressure. In: Proceedings of the 22nd international symposium on combustion. The Combustion Institute; 1988. p. 425-35.
34. Flower WL, Bowman CT. Soot production in axisymmetric laminar diffusion flames at pressures from one to ten atmospheres. In: Proceedings of the 21st international symposium on combustion. The Combustion Institute; 1987. p. 1115-24.
35. Hara HS, Glassman I. Soot formation in diffusion flames of fuel/oxygen mixtures. In: Proceedings of the 22nd international symposium on combustion. The Combustion Institute; 1988.
36. Barry EG, McCabe LJ, Gerke DH, Perez JM. Heavy-duty, diesel engine/fuels combustion performance and emissions. SAE Paper 852078, 1985.
37. Ladommatos N., Rubenstein P., Harrison K., Xiao Z., and Zhao H. The effect of aromatic hydrocarbons on soot formation in laminar diffusion flames and in a diesel engine. J Inst Energy 70 (1997) 84-94
38. Calcote H.F., and Manos D.M. Effect of molecular structure on incipient soot formation. Combust Flame 49 (1983) 289-304
39. Olson D.B., Pickens J.C., and Gill R.J. The effects of molecular structure on soot formation II. Diffusion flames. Combust Flame 62 (1985) 43-60
40. Gulder O.L. Effects of oxygen on soot formation in methane, propane, and n-butane diffusion flames. Combust Flame 101 (1995) 302-310
41. Takashi F., and Glassman I. Sooting correlations for premixed flames. Combust Science Technol 37 (1984) 1-19
42. Inal F., and Senkan S. Effects of oxygenate additives on polycyclic aromatic hydrocarbons (PAHs) and soot formation. Combust Scie Technol 174 9 (2002) 1-19
43. Ni T, Gupta S, Santoro RJ. Suppression of soot formation in ethene laminar diffusion flames by chemical additives. In: Proceedings of the 25th international symposium on combustion. The Combustion Institute; 1994. p. 585.
44. Rubino LTMJ. The effect of oxygenated additives on soot precursor formation in a counterflow diffusion flame. SAE Paper 1999-01-3589, 1999.
45. Song K.H., Nag P., Litzinger T.A., and Haworth D.C. Effects of oxygenated additives on aromatic species in fuel-rich, premixed ethane combustion: a modeling study. Combust Flame 135 (2003) 341-349
46. Henein N.A. Analysis of pollutant formation and control and fuel economy in diesel engines. Prog Energy Combust Sci 1 (1976) 165-207
47. zurLoye AO, Siebers DL, Dec JE. 2-D soot imaging in a direct injection diesel engine using laser-induced incandescence. In: Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines, COMODIA 90, 1990.
48. Dec JE, zurLoye AO, Siebers DL. Soot distribution in a diesel engine using 2-D laser-induced incandescence imaging. SAE Paper 910224, 1991.
49. Dec J.E.E.C. Soot and fuel distributions in a D.I. diesel engine via 2-D imaging. SAE Trans 101 s4 (1992) 1642-1656
50. Dec JE. Soot distribution in a diesel engine using 2-D imaging of laser-induced incandescence, elastic scattering, and flame luminosity. SAE Paper 920115, 1992.
51. Espey C., and Dec J.E. Diesel engine combustion studies in a newly designed optical-access engine using high speed visualization and 2-D laser imaging. SAE Trans 102 s4 (1993) 703-723
52. Espey C., Dec J.E., Litzinger T.A., and Santavicca D.A. Quatitative 2-D fuel vapor concentration imaging in a firing D.I. diesel engine using planar laser-induced Rayleigh scattering. SAE Trans 103 s3 (1994) 1145-1160
53. Espey C., and Dec J.E. The effect of TDC temperature and density on the liquid-phase fuel penetration in a D.I. diesel engine. SAE Trans 104 s4 (1995) 1400-1414
54. Dec JE, Espey C. Ignition and early soot formation in a DI diesel engine using multiple 2-D imaging diagnostics. SAE Paper 950456, 1995.
55. Dec JE. A conceptual model of DI diesel combustion based on laser-sheet imaging. SAE Paper 970873, 1997.
56. Naber JD, Siebers DL, Caton JA, Westbrook CK, Di Julio SS. Natural gas autoignition under diesel conditions: experiments and chemical kinetic modeling. SAE Paper 942034, 1992.
57. Naber JD, Siebers DL. Autoignition of hydrogen under direct-injection compression-ignition engine conditions. In: Spring meeting, Western States Section of the Combustion Institute, 23-26 April 1995.
58. Higgins B, Siebers D, Mueller C, Aradi A. Effects of an ignition-enhancing, diesel-fuel additive on diesel spray evaporation, mixing, ignition and combustion. In: Proceedings of the 27th international symposium on combustion. The Combustion Institute; 1998. p. 1873-80.
59. Higgins B, Siebers D, Aradi A. Diesel-spray ignition and premixed-burn behavior. SAE Paper 2000-01-0940, 2000.
60. Naber JD, Siebers DL. Effects of gas density and vaporization on penetration and dispersion of diesel sprays. SAE Paper 960034, 1996.
61. Siebers DL. Liquid-phase fuel penetration in diesel sprays. SAE Paper 980809, 1998.
62. Higgins BS, Mueller CJ, Siebers DL. Measurements of fuel effects on liquid-phase penetration in D.I. sprays. SAE Paper 1999-01-0519, 1999.
63. Siebers DL. Scaling liquid-phase fuel penetration in diesel sprays based on mixing-limited vaporization. SAE Paper 1999-01-0528, 1999.
64. Siebers D, Higgins B. Flame lift-off on direct-injection diesel sprays under quiescent conditions. SAE Paper 2001-01-0530, 2001.
65. Higgins B, Siebers DL. Measurement of flame lift-off location on DI diesel sprays using OH chemiluminescence. SAE Paper 2001-01-0918, 2001.
66. Pickett LM, Siebers DL. Orifice diameter effects on diesel fuel jet flame structure. In: ASME Fall technical conference, 23-26 September 2001.
67. Siebers DL, Higgins BS, Pickett LM. Flame lift-off on direct-injection diesel fuel jets: oxygen concentration effects. SAE Paper 2002-01-0890, 2002.
68. Dec JE, Tree DR. Diffusion-flame/wall interactions in a heavy-duty DI diesel engine. SAE Paper 2001-01-1295, 2001.
69. Tree DR, Dec JE. Extinction measurements of in-cylinder soot deposition in a heavy-duty DI diesel engine. SAE Paper 2001-01-1296, 2001.
70. Suhre BR, Foster DE. In-cylinder soot deposition rates due to thermophorisis in a direct injection diesel engine. SAE Paper 921629, 1992.
71. Kittelson DB, Ambs JL, Hadjkacem, H. Particulate emissions from diesel engines: influence of in-cylinder surfaces. SAE Paper 900645, 1990.
72. Dec JE, Kelly-Zion PL. The effects of injection timing and diluent addition on late-combustion soot burnout in a DI diesel engine based on simultaneous 2-D imaging of OH and soot. SAE Paper 2000-01-0238, 2000.
73. Idicheria CA, Pickett LM. Soot formation in diesel combustion under high-EGR conditions. SAE Paper 2005-FFL-127 2005;
74. Pickett L.M. Low flame temperature limits for mixing-controlled diesel combustion. Proc Combust Inst 30 (2005) 2727-2735
75. Pickett LM, Siebers DL, Idicheria CA. Relationship between ignition processes and the lift-off length of diesel fuel jets. SAE Paper 2005-01-3843 2005.
76. Pinson JA, Mitchell DL, Santoro RJ, Litzinger TA. Quantitative, planar soot measurements in a D.I. diesel engine using laser-induced incandescence and light scattering. SAE Paper 932650, 1993.
77. Lee W., Solbrig C.E., Litzinger C.E., Santoro R.J., and Santavicca D.A. Planar laser light scattering for the in-cylinder study of soot in a diesel engine. SAE Trans 99 s3 (1990) 2222-2235
78. Alatas B., Pinson J.A., Litzinger T.A., and Santavicca D.A. A study of NO and soot evolution in a DI diesel engine via planar imaging. SAE Trans 102 s3 (1993) 1463-1473
79. Wiltafsky GW, Stoltz JK, Espey C. The quantification of laser-induced incandescence (LII) for planar time resolved measurements of the soot volume fraction in a combusting diesel jet. SAE Paper 961200, 1996.
80. Ferguson CR, Tree DR, DeWitt DP, Wahiduzzaman SAH. Design, calibration and error analysis of instruments for heat transfer measurements in internal combustion engines. ASME reprint from developments in experimental techniques in heat transfer and combustion, HDT-Vol. 71, 1987.
81. Hottel H., and Broughton F. Determination of true temperature and total radiation from luminous gas flames. Ind Eng Chem 4 2 (1932) 166-175
82. Musculus MP, Dec JE, Tree DR. Effects of fuel parameters and diffusion flame lift-off on soot formation in a heavy-duty DI diesel engine. SAE Paper 2002-01-0889, 2002.
83. Xu Y, Lee CF. Investigation of soot formation in diesel combustion using forward illumination light extinction (FILE) technique. SAE Paper 2004-01-1411, 2004.
84. Tree D.R., and Foster D.E. Optical soot particle size and number density measurements in a direct injection diesel engine. Combust Sci Technol 95 (1994) 313-331
85. Flynn P, Mizusawa M, Uyehara OA, Meyers PS. An experimental determination of the instantaneous potential radianet heat transfer within an operating diesel engine. SAE Paper 720022, 1972.
86. Matsui Y, Kamimoto T, Matsuoka S. A study of time and space resolved measurement of flame temperature and soot concentration in a D.I. diesel engine by the two-color method. SAE Paper 790491, 1979.
87. Matsui Y, Kamimoto T, Matsuoka S. A study on the application of the two-color method to the measurement of flame temperature and soot concentration in diesel engines. SAE Paper 800970, 1980.
88. Ladommatos N, Zhao H. A guide to measurement of flame temperature and soot concentration in diesel engines using the two-colour method, part 2: implementation. SAE Paper 941956, 1994.
89. di Stasio S., and Massoli P. Influence of the soot property uncertanties in temperature and volume-fraction measurements by two-colour pyrometry. Measure Sci Technol 5 (1994) 1453-1465
90. Zhao H., and Ladommatos N. Optical diagnostics for soot and temperature measurement in diesel engines. Prog Energy Combust Sci 24 (1998) 221-225
91. Wahiduzzaman S, Morel T, Timar J, DeWitt DP. Experimental and analytical study of heat radiation in a diesel engine. SAE Paper 870571, 1987.
92. Oren DC, Durrett RP, Ferguson CR, Timar J, Tree DR, DeWitt DP. A multidimensional data set for diesel combustion model validation: II fuel injection rate and boundary conditions. SAE Paper 872088, 1987.
93. Yan J, Borman GL. Analysis and in-cylinder measurement of particulate radiant emission and temperature in a direct-injection diesel engine. SAE Paper 881315, 1988.
94. Mohammad IS, Borman GL. Measurement of soot and flame temperature along three directions in the cylinder of a direct injection diesel. SAE Paper 910728, 1991.
95. Bower GR, Foster DE. Data from rate shape high pressure injection system operating in an engine fed constant volume combustion chamber. SAE Paper 902082, 1990.
96. Ning M, Yuan-Xian Z, Guo-dong H, Zhen-Huan S. Soot formation oxidation and its mechanism in different combustion systems and smoke emission pattern in DI diesel engines. SAE Paper 910230, 1991.
97. No SH, Kobiri S, Enomoto Y, Kamimoto T. High temperature diesel combustion in a rapid compression-expansion machine. SAE Paper 911845, 1991.
98. Kawaguchi A, Sato Y, Yanagihara H, Ishiguro T. A study of soot formation processes in a dual fueled compression ignition engine. SAE Paper 922304, 1992.
99. Lipkea WH, DeJoode AD. Direct injection engine soot modeling: formulation and results. SAE Paper 940670, 1994.
100. x production in an engine-fed combustion chamber. SAE Paper 932655, 1993.
101. Kowalczyk M. Quantitative specification of the cyclic irregularity of diesel engine flame radiation. SAE Paper 940898, 1994.
102. Zhang L, Takatsuki T, Yokata K. An observation and analysis of the combustion under supercharging on a DI diesel engine. SAE Paper 940844, 1994.
103. Ishida M, Chen Z, Luo G, Ueki H. The effect of pilot injection on combustion in a turbocharged D.I. diesel engine. SAE Paper 941692, 1994.
104. Li XWJS. In-cylinder measurement of temperature and soot concentration using the two-color method. SAE Paper 950848, 1995.
105. Wiartalla A, Bamcker H, Daxernholz M. Influence of injection system parameters on spray development, combustion, and soot formation by optical measurement techniques in a model combustion chamber. SAE Paper 950233, 1995.
106. Arcoumanis C, Nagwaney A, Hentschel W, Rarpke S. Effects of EGR on spray development, combustion and emissions in a 1.9 L, direct injection diesel engine. SAE Paper 952356, 1995.
107. Arcoumanis C, Bae C, Nagwaney A, Whitelaw JH. Effect of EGR on combustion development in a 1.9 L, DI diesel engine. SAE Paper 950850, 1995.
108. Iida N, Nakamura M, Hashi H. Study of diesel spray combustion in an ambient gas containing hydrocarbon using a rapid compression machine. SAE Paper 970899, 1997.
109. Bertoli C, Giacomo ND, Beatrice C. Diesel combustion improvements by the use of oxygenated synthetic fuels. SAE Paper 972972, 1997.
110. Gomes P, Yates DA. Analysis of the influence of injection timing on diesel combustion by the two-color method. SAE Paper 982890, 1998.
111. Bakenhus M, Reitz RD. Two-color combustion visualization of single and split injections in a single-cylinder, heavy-duty D.I. diesel engine using and endoscope-based imaging system. SAE Paper 1999-01-1112, 1999.
112. Timar J. Master thesis, Purdue University, 1987.
113. Quoc HX, Vignon J, Brun M. A new approach of the two-color method for determining local instantaneous soot concentration and temperature in a D.I. diesel combustion chamber. SAE Paper 910736, 1991.
114. Ahn SK, Matsui Y, Kamimoto T, Matsuoka S. Measurement of flame temperature distribution in a D.I. diesel engine by means of image analysis of nega-color photographs. SAE Paper 810183, 1981.
115. Won H, Kamimoto T, Kosaka H. A study of soot formation in unsteady spray flames via 2-D soot imaging. SAE Paper 920114, 1992.
116. Kawamura K, Saito A, Yaegashi T, Iwashita Y. Measurement of flame temperature distributution in engines by using a two-color high speed shutter TV camera system. SAE Paper 890320, 1989.
117. Shoizaki T, Nakajima H, Yoyota H, Miyashita A. The visulization and its analysis of combustion flame in a DI diesel engine. SAE Paper 980141, 1998.
118. Vattulainen J., Nummela V., Hernberg R., and Kytola J. A system for quantitative imaging diagnostics and its application to pyrometric in-cylinder flame-temperature measurements in large diesel engines. Measure Sci Technol 11 (2000) 103-109
119. Jeong YI, Qian Y, Campbell S, Rhee KT. Investigation of a direct injection diesel engine by high-speed spectral IF imaging and KIVA-II. SAE Paper 941732, 1994.
120. Clasen E, Capmbell, Rhee KT. Spectral IR images of direct-injection diesel combustion by high-pressure fuel injection. SAE Paper 950605, 1995.
121. Zhang L, Minami T, Takatsuki T, Yokota K. An analysis of the combustion of a DI diesel engine by photography processing. SAE Paper 930594, 1993.
122. Shakal JS, Martin JK. Imaging and spatially resolved two-color temperature measurements through a coherent fiber optic: observation of auxiliary fuel injection effects on combustion in a two-stroke DI diesel. SAE paper 940903, 1994.
123. Cozcione FE, Mazziotti G, Veglico BM. Two-dimensional analysis of diesel combustion by spectral flame emissivity measurements. SAE Paper 960838, 1996.
124. Kong S, Ricart L, Reitz RD. In-cylinder diesel flame imaging compared with numerical computations. SAE Paper 950455, 1995.
125. x by strong turbulence generated during the combustion process in D.I. diesel engines. SAE Paper 920467, 1992.
126. Hampson GJ. Two-color imaging of in-cylinder soot concentration and temperature in a heavy-duty DI diesel engine with comparison to multidimensional modeling for single and split injections. SAE Paper 980524, 1998.
127. Shiozaki T, Nakajima H, Yokota H, Miyashita A. The visulization and its analysis of combustion flame in a DI diesel engine. SAE Paper 980141, 1998.
128. Larsson A. Optical studies in a DI diesel engine. SAE Paper 1999-01-3650, 1999.
129. Dahlen L, Larsson A. CFD studies of combustion and in-cylinder soot trends in a DI diesel engine-comparison of direct photography studies. SAE Paper 2000-01-1889, 2000.
130. Desantes JM, Arregle J, Molina SA, Lejeune M. Influence of EGR rate, oxygen concentration and equivalent fuel/air ratio on the combustion behavior and pollutant emissions of heavy-duty diesel engine. SAE Paper 2000-01-1813, 2000.
131. Mori K, Jyoutaki H, Kawi KaSK. New quiescent combstion system for heavy-duty diesel engines to overcome exhaust emissions and fuel consumption trade-off. SAE Paper 2000-01-1811, 2000.
132. Kweon Choi B, Foster DE, Shibata G. The effects of oxygenate and gasoline-diesel fuel blends on diesel engine emissions. SAE Paper 2000-01-1173, 2000.
133. Donahue R, Foster DE. Effects of oxygen enhancement on the emissions from a DI diesel via. Manipulation of fuels and combustion chamber gas composition. SAE Paper 2000-01-0512, 2000.
134. Beatrice C, Bertoli C, Giacomo ND, Guido C, Migliaccio M. In-cylinder soot evolution analysis in a transparent research DI engine fed by oxygentated fuels. SAE Paper 2002-01-2851, 2002.
135. Kawano D, Senda J, Kawakami K, Shimada A, Fujimoto H. Fuel design concept for low emission in engine systems, 2nd report: analysis of combustion characteristics for the mixed fuels. SAE Paper 2001-01-0202, 2001.
136. Ishii Hajime Goto Y, Odaka M, Kazakov A, Foster DE. Comparison of numerical results and experimental data on emission production processes in a diesel engine. SAE Paper 2001-01-0656, 2001.
137. Takahashi S, Wakimoto K, Iida N, Nikoloc D. Effects of aromatic content and 90% distillation temperature of diesel fuels on flame temperature and soot formation. SAE Paper 2001-01-1940, 2001.
138. Nikolic D, Wakimoto K, Takahashi S, Iida N. Effect of nozzle diameter and EGR ratio on the flame temperature and soot formation for various fuels. SAE Paper 2001-01-1939, 2001.
139. Sholes KR, Odaka M, Goto Y, Ishii H, Suzuki H. Study of the effects of boiling point on combustion and pm emissions in a compression ignition engine using two-component n-paraffin fuels. SAE Paper 2002-01-0871, 2002.
140. Tribulowski J, Spicher U, Richter B, Dullenkopf K, Wittig S. Influnce of atomization quality on mixture formation, combustion, and emissions in a Mpi engine under cold start conditions-part I. SAE Paper 2002-01-2806, 2002.
141. Ciatti SA, Blobaum EL, Foster DE. Determination of diesel injector nozzle characteristics using two-color optical pyrometry. SAE Paper 2002-01-0746, 2002.
142. Ito T, Katamura T, Ueda M, Matsumoto T, Senda J, Fujimoto H. effects of flame lift-off and flame temperature on soot formation in oxygenated fuel sprays. SAE Paper 2003-01-0073, 2003.
143. Rente T, Denbratt I. Experimental study of the combustion process in a heavy-duty DI diesel engine for different injection scenarios. SAE Paper 2003-01-1783, 2003.
144. Svensson KI, Mackrory AJ, Richards MJ, Tree DR. Calibration of an RGB, CCD camera and interpretation of its two-color images for KL and temperature. SAE Paper 2005-01-0648, 2005.
145. Ullman TL, Spreen KB, Mason RL. Effects of cetane number, cetane improver, aromatics, and oxygenates on 1994 heavy-duty diesel engine emissions. SAE Paper 941020, 1994.
146. Miyamoto N, Ogawa H, Shibuya M, Arai K, Esmilaire O. Influence of the molecular structure of hydrocarbon fuels on diesel exhaust emissions. SAE Paper 940676, 1994.
147. Tsurutani K, Takei Y, Fujimoto Y, Matsudaira J, Kumamoto M. The effects of fuel properties and oxygenates on diesel exhaust emissions. SAE Paper 952349, 1995.
148. Bertoli C, Del Giacomo N, Iorio B, Prati MV. The influence of fuel composition on particulate emissions of DI diesel engines. SAE Paper 932733, 1993.
149. x concentration measurements in D.I. diesel engine fed by fuels of varying quality. SAE Paper 960832, 1996.
150. Nakakita K, Takasu S, Ban H, Ogawa T, Naruse H, Tsukasaki Y, Yeh LI. Effect of hydrocarbon molecular structure on diesel exhaust emissions-part 1: comparison of combustion and exhaust emission characteristics among representative diesel fuels. SAE Paper 982494, 1998.
151. Takatori Y, Mandokoro Y, Akihama K, Nakakita K, Tsukasaki Y, Iguchi S, et al. Effect of hydrocarbon molecular structure on diesel exhaust emissions-part 2: effect of branched and ring structures of paraffins on benzene and soot formation. SAE Paper 982495, 1998.
152. Svensson KI, Richards MJ, Mackrory AJ, Tree DR. Fuel composition and molecular structure effects on soot formation in direct-injection flames under diesel engine conditions. SAE Paper 2005-01-0381, 2005.
153. Pickett LM, Siebers DL. Fuel effects on soot processes of fuel jets at DI diesel conditions. SAE Paper 2003-01-3080, 2003.
154. Miyamoto N, Ogawa H, Arima T, Miyakawa K. Improvement of diesel combustion and emissions with addition of various oxygenated agents to diesel fuels. SAE Paper 962115, 1996.
155. x, high thermal efficiency, and low noise diesel combustion with oxygenated agents as main fuel. SAE Paper 980506, 1998.
156. Nabi MN, Minami M, Ogawa H, Miyamoto N. Ultra low emission and high performance diesel combustion with highly oxygenated fuel. SAE Paper 2000-01-0231, 2000.
157. Liotta FJ, Montalvo DM. The effect of oxygenated fuels on emissions from a modern heavy-duty diesel engine. SAE Paper 932734, 1993. 59-75.
158. Beatrice C., Bertoli C., and Giacomo N.D. New findings on combustion behavior of oxygenated synthetic diesel fuels. Combust Sci Technol 137 (1998) 31-50
159. Hallgren BE, Heywood JB. Effects of oxygenated fuels on DI diesel combustion and emissions. SAE Paper 2001-01-0648, 2001.
160. Mueller CJ, Martin GC. Effects of oxygenated compounds on combustion and soot evolution in a DI diesel engine: broadband natural luminosity imaging. SAE Paper 2002-01-1631, 2002.
161. Mueller CJ, Pitz WJ, Pickett LM, Martin GC, Siebers DL,Westbrook CK. Effects of oxygenates on soot processes in DI diesel engines: experiments and numerical simulations. SAE Paper 2003-01-1791, 2003.
162. Song J., Cheenkachorn K., Wang J., Perez J., Boehman A.L., Young P.J., et al. Effect of oxygenated fuel on combustion and emissions in a light-duty turbo diesel engine. Energy Fuels 16 (2002) 294-301
163. Beatrice C, Bertoli C, Giacomo ND, Migliaccio MN. Potentiality of oxygenated synthetic fuel and reformulated fuel on emissions from a modern DI diesel engine. SAE Paper 1999-01-3595, 1999.
164. x from a DI diesel engine with EGR and dimethyl carbonate. SAE Paper 952518, 1995.
165. Cheng AS, Dibble RW, Buchholz BA. The effect of oxygenates on diesel engine particulate matter. SAE Paper 2002-01-1705, 2002.
166. Beatrice C., Bertoli C., D'Alessio J., Giacomo N.D., Lazzaro M., and Massoli P. Experimental characterization of combustion behaviour of new diesel fuels for low emission engines. Combust Sci Technol 120 (1996) 335-355
167. Curran HJ, Fisher EM, Glaude P-A, Marinov NM, Pitz WJ, Westbrook CK, et al. Detailed chemical kinetic modeling of diesel combustion with oxygenated fuels. SAE Paper 2001-01-0653, 2001.
168. Pickett LM, Lopez JJ. Jet-wall interaction effects on diesel combustion and soot formation. SAE Paper 2005-01-0921, 2005.
169. Pickett L.M., and Siebers D.L. Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure. Combust Flame 138 1-2 (2004) 114-135
170. x emissions by using multiple injections in a heavy duty D.I. diesel engine. SAE Paper 940897, 1994.
171. x using multiple injections and EGR in a D.I. diesel. SAE Paper 950217, 1995.
172. x and particulate emissions by using multiple injections in a small diesel engine. SAE Paper 2000-01-3084, 2000.
173. x emissions from a D.I. diesel engine. SAE Paper 960316, 1996.
174. x emissions for DI diesel engines analyzed using an engineering model. SAE Paper 2002-01-2774, 2002.
175. x emissions for DI diesel engines analyzed using an engineering model. SAE Paper 2002-01-2774, 2002.
176. Park C, Kook S, Bae C. Effects of multiple injections in a HSDI diesel engine equipped with common-rail injection system. SAE Paper 2004-01-0127, 2004.
177. x emission reduction using multiple-injection in a diesel engine. SAE Paper 960633, 1996.
178. Mallamo F, Badami M, Millo F. Analysis of multiple injection strategies for the reduction of emissions, noise and BSFC of a DI Cr small displacement non-road diesel engine. SAE Paper 2002-01-2672, 2002.
179. x by controlling both the turbulence and the mixture formation in DI diesel engines. SAE Paper 932797, 1993.
180. Choi CY, Foster DE. In cylinder augmented mixing through controlled gaseous jet injection. SAE Paper 952358, 1995.
181. Mather DK, Reitz RD. Modeling the effects of auxiliary gas injection on diesel engine combustion and emissions. SAE Paper 2000-01-0657, 2000.
182. Dryer FL. Water addition to practical combustion systems: concepts and applications. In: Proceedings of the 16th international symposium on combustion. The Combustion Institute, 1976.
183. Lasheras J.C., Fernandez-Fello A.C., and Drey F.L. Initial observations of free droplet combustion characteristics of water in fuel emulsions. Combust Sci Technol 21 (1979) 1-14
184. Tsao KC, Xu Y. A further look on micro-explosion of water emulsion fuel droplets. SAE Paper 891883, 1989.
185. Tsa KC, Wang CL. Puffing and micro-explosion phenomena of water emulsion fuels. SAE Paper 860304, 1986.
186. x emissions on particulates on a large heavy-duty two-stroke diesel engine operating on water-in fuel emulsion. SAE Paper 941783, 1994.
187. Ishida M, Chen Z. An analysis of the added water effect on NO formation in D.I. diesel engines. SAE Paper 941691, 1994.
188. De Vita A. Multi-cylinder D.I. diesel engine tests with unstabilized emulsion of water and ethanol in diesel fuel. SAE Paper 890450, 1989.
189. Tsukahara MYY, Murayama T. W/O emulsion realizes low smoke and efficient operation of DI engines without high pressure injection. SAE Paper 890449, 1989.
190. Hsu BD. Combustion of water-in-diesel emulsion in an experimental medium speed diesel engine. SAE Paper 860300, 1986.
191. x, smoke, BSFC, and maximum combustion pressure by low compression ratios in a diesel engine fuelled by emulsified fuel. SAE Paper 920464, 1992.
192. Afify EM, Korah NS, Dickey DW. The effect of air charge temperature on performance, ignition delay and exhaust emissions of diesel engines using W/O emulsions as fuel. SAE Paper 870555, 1987.
193. Andrews GE, Bartle KD, Pang SW, Nurein AM, Williams PT. The reduction in diesel particulate emissions using emulsified fuels. SAE Paper 880348, 1988.
194. Dec JE, Canaan R, Tree DR. The effect of water emulsified fuel on diesel soot formation. In: proceedings of the 219th ACS national meeting, San Francisco, CA, 26-30 March 2000.
195. Musculus MPB, Dec, JE, Tree DR, Daly D, Langer D, Ryan TW, et al. Effects of water-fuel emulsions on spray and combustion processes in a heavy-duty DI diesel engine. SAE Paper 2002-01-2892, 2002.
196. Song KH, Lee Y, Litzinger TA. Effects of emulsified fuels on soot evolution in an optically accessible DI diesel engine. SAE Paper 2000-01-2794, 2000.
197. Kamimoto T, Bae M. High combustion temperature for the reduction of particulate in diesel engines. SAE Paper 880423, 1988.
198. Akihama K, Takatori Y, Inagaki K, Sasaki S, Dean AM. Mechanism of smokeless rich diesel combustion by reducing temperature. SAE Paper 2001-0655, 2001.
199. Kitamura T, Ito T, Kitamura Y, Ueda M, Senda J, Fujimoto H. Soot kinetic modeling and emperical validation on smokeless diesel combustion with oxygenated fuels. SAE Paper 2003-01-1789, 2003.
200. Pickett LM, Siebers DL. Non-sooting, low flame temperature mixing controlled DI diesel combusiton. SAE Paper 2004-01-1399, 2004.
201. Hentschel W, Richter J-U. Time-resolved analysis of soot formation and oxidation in a direct-injection diesel engine for different EGR-rates by an extinction method. SAE Paper 952517, 1995.
202. Bertoli C, Giacomo ND, Beatrice C, Migliaccio MN. Evaluation of combustion behavior and pollutants emission of advanced fuel formulations by single cylinder engine experiments. SAE Paper 982492, 1998.
203. Choi C.Y., and Reitz R.D. An experimental study on the effects of oxygenated fuel blends and multiple injection strategies on DI diesel engine emissions. Fuel 78 (1999) 1303-1317