Probabilistic analysis of preload in the abutment screw of a dental implant complex

Journal of Prosthetic Dentistry

Volumn 100, Issue 3, 2008, Pages 183-193

  Guda, Teja ^a   Ross, Thomas A ^a   Lang, Lisa A ^b   Millwater, Harry R ^a  

^a The University of Texas at San Antonio   (United States)

^b UNIVERSITY OF TEXAS HEALTH SCIENCE CENTER AT SAN ANTONIO   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; GOLD ALLOY; TITANIUM;

ARTICLE; BIOLOGICAL MODEL; BIOMECHANICS; CHEMISTRY; COMPARATIVE STUDY; COMPUTER SIMULATION; DENTURE; DESICCATION; ELASTICITY; FINITE ELEMENT ANALYSIS; FRICTION; HUMAN; LUBRICATION; MATERIALS TESTING; MECHANICAL STRESS; MONTE CARLO METHOD; PROBABILITY; SURFACE PROPERTY; TOOTH IMPLANTATION; TOOTH PROSTHESIS; TORQUE;

BIOMECHANICS; COMPUTER SIMULATION; DENTAL ABUTMENTS; DENTAL IMPLANTS; DENTAL MATERIALS; DENTAL PROSTHESIS DESIGN; DESICCATION; ELASTICITY; FINITE ELEMENT ANALYSIS; FRICTION; GOLD ALLOYS; HUMANS; LUBRICATION; MATERIALS TESTING; MODELS, BIOLOGICAL; MONTE CARLO METHOD; PROBABILITY; STRESS, MECHANICAL; SURFACE PROPERTIES; TITANIUM; TORQUE;

EID: 50349090311     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(08)60177-8     Document Type: Article

References (57)

1. Bränemark P.I. Introduction to osseointegration. In: Bränemark P.I., Zarb G.A., and Albrektsson T. (Eds). Tissue-integrated prostheses: osseointegration in clinical dentistry (1985), Quintessence, Chicago 11-77
2. Douglass C.W., Shih A., and Ostry L. Will there be a need for complete dentures in the United States in 2020?. J Prosthet Dent 87 (2002) 5-8
3. National Institutes of Health Consensus Development Conference statement on dental implants June 13-15, 1988. J Dent Educ 52 (1988) 824-827
4. Patterson E.A., and Johns R.B. Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int J Oral Maxillofac Implants 7 (1992) 26-33
5. Burguete R., Johns R.B., King T., and Patterson E.A. Tightening characteristics for screwed joints in osseointegrated dental implants. J Prosthet Dent 71 (1994) 592-599
6. Bickford J.H. Introduction to the design and behavior of bolted joints: non-gasketed joints. 4th ed. (2007), CRC Press, Boca Raton 137-169 293-352, 391-421.
7. Ekfeldt A., Carlsson G.E., and Börjesson G. Clinical evaluation of single-tooth restorations supported by osseointegrated implants: a retrospective study. Int J Oral Maxillofac Implants 9 (1994) 179-183
8. Jemt T., Lekholm U., and Gröndahl K. 3-year follow-up study of early single implant restorations ad modum Bränemark. Int J Periodontics Restorative Dent 10 (1990) 340-349
9. Jemt T., and Pettersson P. A 3-year follow-up study on single implant treatment. J Dent 21 (1993) 203-208
10. Jemt T., Laney W.R., Harris D., Henry P.J., Krogh Jr. P.H., Polizzi G., et al. Osseointegrated implants for single tooth replacement: a 1-year report from a multicenter prospective study. Int J Oral Maxillofac Implants 6 (1991) 29-36
11. Laney W.R., Jemt T., Harris D., Henry P.J., Krogh P.H., Polizzi G., et al. Osseointegrated implants for single-tooth replacement: progress report from a multicenter prospective study after 3 years. Int J Oral Maxillofac Implants 9 (1994) 49-54
12. Dixon D.L., Breeding L.C., Sadler J.P., and McKay M.L. Comparison of screw loosening, rotation, and deflection among three implant designs. J Prosthet Dent 74 (1995) 270-278
13. Cho S.C., Small P.N., Elian N., and Tarnow D. Screw loosening for standard and wide diameter implants in partially edentulous cases: 3- to 7-year longitudinal data. Implant Dent 13 (2004) 245-250
14. Gratton D.G., Aquilino S.A., and Stanford C.M. Micromotion and dynamic fatigue properties of the dental implant-abutment interface. J Prosthet Dent 85 (2001) 47-52
15. Misch C.E., Wang H.L., Misch C.M., Sharawy M., Lemons J., and Judy K.W. Rationale for the application of immediate load in implant dentistry: Part I. Implant Dent 13 (2004) 207-217
16. Haack J.E., Sakaguchi R.L., Sun T., and Coffey J.P. Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants 10 (1995) 529-536
17. McGlumphy E.A., Mendel D.A., and Holloway J.A. Implant screw mechanics. Dent Clin North Am 42 (1998) 71-89
18. Shigley J.E., Mischke C.R., and Budynas R.G. Mechanical engineering design. 7th ed. (2003), McGraw-Hill, New York 396-448
19. Nissan J., Gross M., Shifman A., and Assif D. Stress levels for well-fitting implant superstructures as a function of tightening force levels, tightening sequence, and different operators. J Prosthet Dent 86 (2001) 20-23
20. Standlee J.P., and Caputo A.A. Accuracy of an electric torque-limiting device for implants. Int J Oral Maxillofac Implants 14 (1999) 278-281
21. Dellinges M.A., and Tebrock O.C. A measurement of torque values obtained with hand-held drivers in a simulated clinical setting. J Prosthodont 2 (1993) 212-214
22. Binon P.P. The external hexagonal interface and screw-joint stability: A primer on threaded fasteners in implant dentistry. Implant Dent QDT (2000) 91-105
23. Lang L.A., Kang B., Wang R.F., and Lang B.R. Finite element analysis to determine implant preload. J Prosthet Dent 90 (2003) 539-546
24. Martin W.C., Woody R.D., Miller B.H., and Miller A.W. Implant abutment screw rotations and preloads for four different screw materials and surfaces. J Prosthet Dent 86 (2001) 24-32
25. Lang L.A., Sierraalta M., Hoffensperger M., and Wang R.F. Evaluation of the precision of fit between the Procera custom abutment and various implant systems. Int J Oral Maxillofac Implants 18 (2003) 652-658
26. Merz B.R., Hunenbart S., and Belser U.C. Mechanics of the implant-abutment connection: an 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 15 (2000) 519-526
27. Sakaguchi R.L., and Borgersen S.E. Nonlinear contact analysis of preload in dental implant screws. Int J Oral Maxillofac Implants 10 (1995) 295-302
28. Alkan I., Sertgöz A., and Ekici B. Influence of occlusal forces on stress distribution in preloaded dental implant screws. J Prosthet Dent 91 (2004) 319-325
29. Standard specification for wrought Ti-6Al-4V alloy for surgical implant applications. ASTM Committee F-4 on medical and surgical materials and devices, ASTM Designation F1472 - 02a (2002), ASTM International, West Conshohocken. Available at: http://www.astm.org
30. Standard specification for unalloyed titanium for surgical implant applications. ASTM Committee F-4 on medical and surgical materials and devices. ASTM Designation F67-06 (2006), ASTM International, West Conshohocken. Available at: http://www.astm.org
31. Akca K., Cehreli M., and Iplikçioglu H. Evaluation of the mechanical characteristics of the implant-abutment complex of a reduced-diameter morse-taper implant. A nonlinear finite element stress analysis. Clin Oral Implants Res 14 (2003) 444-454
32. Blau P.J. Appendix: Static and kinetic friction coefficients for selected metals. ASM handbook volume 18: friction, lubrication and wear technology (1992), ASM International, Materials Park 70-71
33. Bozkaya D., and Müftü S. Mechanics of the taper integrated screwed-in (TIS) abutments used in dental implants. J Biomech 38 (2005) 87-97
34. Chun H.J., Cheong S.Y., Han J.H., Heo S.J., Chung J.P., Rhyu I.C., et al. Evaluation of design parameters of osseointegrated dental implants using finite element analysis. J Oral Rehabil 29 (2002) 565-574
35. Dargahi J., Najarian S., and Talebi M. Analysis of the effects of different materials in a tooth implant-supported fixed prosthesis using finite element method. Biomed Mater Eng 15 (2005) 317-331
36. Eskitascioglu G., Usumez A., Sevimay M., Soykan E., and Unsal E. The influence of occlusal loading location on stresses transferred to implant-supported prostheses and supporting bone: A three-dimensional finite element study. J Prosthet Dent 91 (2004) 144-150
37. Gefen A. Optimizing the biomechanical compatibility of orthopedic screws for bone fracture fixation. Med Eng Phys 24 (2002) 337-347
38. Geng J.P., Ma Q.S., Xu W., Tan K.B., and Liu G.R. Finite element analysis of four thread-form configurations in a stepped screw implant. J Oral Rehabil 31 (2004) 233-239
39. Genna F. Shakedown, self-stresses, and unilateral contact in a dental implant problem. European Journal of Mechanics A/Solids 23 (2004) 485-498
40. Himmlová L., Dostálová T., Kácovsky A., and Konvicková S. Influence of implant length and diameter on stress distribution: a finite element analysis. J Prosthet Dent 91 (2004) 20-25
41. Holmes D.C., Haganman C.R., Aquilino S.A., Diaz-Arnold A.M., and Stanford C.M. Finite element stress analysis of IMZ abutment designs: development of a model. J Prosthodont 6 (1997) 31-36
42. Jörnéus L., Jemt T., and Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants 7 (1992) 353-359
43. Kim S.K., Lee J.B., Koak J.Y., Heo S.J., Lee K.R., Cho L.R., et al. An abutment screw loosening study of a diamond like carbon-coated CP titanium implant. J Oral Rehabil 32 (2005) 346-350
44. Kitagawa T., Tanimoto Y., Odaki M., Nemoto K., and Aida M. Influence of implant/abutment joint designs on abutment screw loosening in a dental implant system. J Biomed Mater Res B Appl Biomater 75 (2005) 457-463
45. Kunavisarut C., Lang L.A., Stoner B.R., and Felton D.A. Finite element analysis on dental implant-supported prostheses without passive fit. J Prosthodont 11 (2002) 30-40
46. McCracken M. Dental implant materials: commercially pure titanium and titanium alloys. J Prosthodont 8 (1999) 40-43
47. Pietrabissa R., Contro R., Quaglini V., Soncini M., Gionso L., and Simion M. Experimental and computational approach for the evaluation of the biomechanical effects of dental bridge misfit. J Biomech 33 (2000) 1489-1495
48. Rangert B., Jemt T., and Jörneus L. Forces and moments on Bränemark implants. Int J Oral Maxillofac Implants 4 (1989) 241-247
49. van Zyl P.P., Grundling N.L., Jooste C.H., and Terblanche E. Three-dimensional finite element model of a human mandible incorporating six osseointegrated implants for stress analysis of mandibular cantilever prostheses. Int J Oral Maxillofac Implants 10 (1995) 51-57
50. Versluis A., Korioth T.W., and Cardoso A.C. Numerical analysis of a dental implant system preloaded with a washer. Int J Oral Maxillofac Implants 14 (1999) 337-341
51. Sakaguchi R.L., and Borgersen S.E. Nonlinear finite element contact analysis of dental implant components. Int J Oral Maxillofac Implants 8 (1993) 655-661
52. Bowden F.P., and Tabor D. The friction and lubrication of solids (2000), Oxford University Press, Oxford 322-327
53. Tzenakis G.K., Nagy W.W., Fournelle R.A., and Dhuru V.B. The effect of repeated torque and salivary contamination on the preload of slotted gold implant prosthetic screws. J Prosthet Dent 88 (2002) 183-191
54. Wu Y.T., Millwater H.R., and Cruse T.A. Advanced probabilistic structural analysis method for implicit performance functions. AIAA, 28 (1990) 1663-1669
55. Rubinstein R.Y., and Kroese D.P. Simulation and the Monte Carlo method. 2nd ed. (2007), Wiley-Interscience, New York 1-345
56. Rubinstein R.Y. Sensitivity analysis and performance extrapolation for computer simulation models. Operations Research 37 (1989) 72-81
57. Madsen H.O., Krenk S., and Lind N.C. Methods of structural safety (2006), Prentice-Hall, Inc, Englewood Cliffs 120-123