Analysis of the effects of different materials in a tooth implant-supported fixed prosthesis using finite element method

Bio-Medical Materials and Engineering

Volumn 15, Issue 4, 2005, Pages 317-331

  Dargahi, Javad ^a   Najarian, Siamak ^a,b   Talebi, Mehdi ^b  

^a Gina Cody School of Engineering and Computer Science   (Canada)

^b AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Dental implant; FEA; Fixed prosthesis; Modeling; Three dimensional

Indexed keywords

COMPUTER SIMULATION; DEFLECTION (STRUCTURES); DEFORMATION; DENTAL PROSTHESES; ELASTIC MODULI; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; STRESS ANALYSIS; STRESS CONCENTRATION;

CROMIUM-COPPER ALLOYS; MATERIAL SELECTION; TOOTH IMPLANT-SUPPORTED FIXED PROSTHESIS; VON MISES STRESSES;

DENTISTRY;

CHROMIUM; COBALT; TITANIUM;

ARTICLE; FINITE ELEMENT ANALYSIS; INSTRUMENT; PRIORITY JOURNAL; PROSTHESIS; SIMULATION; STRESS; SURFACE PROPERTY; THEORETICAL MODEL; TOOTH IMPLANTATION; YOUNG MODULUS;

COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; DENTAL IMPLANTS, SINGLE-TOOTH; DENTAL MATERIALS; ELASTICITY; EQUIPMENT FAILURE ANALYSIS; FINITE ELEMENT ANALYSIS; HUMANS; MANDIBLE; MATERIALS TESTING; MODELS, BIOLOGICAL; PROSTHESIS DESIGN; STRESS, MECHANICAL;

EID: 22244493952     PISSN: 09592989     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (37)

1. R.W. Philips, The Science of Dental Materials, 9th edn, W.B. Saunders Company, Philadelphia and London, 1991.
2. E. De Smet, D. van Steenberghe, M. Quirynen and I. Naert, The influence of plaque and/or excessive loading on marginal soft and hard tissue reactions around Branemark implants: a review of literature and experience, International Journal of Periodontics and Restorative Dentistry 21 (2001), 381-393.
3. C.A. Babbush, Dental Implants: The Art and Science, 2nd edn, W.B. Saunders Publication Company, 2001.
4. J. Dargahi and S. Najarian, Theoretical and experimental analysis of a piezoelectric tactile sensor for use in endoscopic surgery, Sensor Review, Accepted for publication, to appear in 24(1) (2004).
5. J. Dargahi, S. Najarian and S. Amiri, Optimization of the geometry of total knee implant in the sagittal plane using FEA, Bio-Medical Materials and Engineering 13(4) (2003), 439-449.
6. S. Najarian and B. Heidari, Prediction of load sharing in lumbar spine using FEM, Proceedings of the 12th European Society of Biomechanics Conference, Dublin, Republic of Ireland, 2000, pp. 207-209.
7. S. Najarian and H. Sharifzadeh, Effects of balloon inflation on the atheroscerotic plaque, Biomedical Sciences Instrumentation 38 (2001), 337-342.
8. S. Najarian and A. Pashaee, Improvement of the Pennes equation in the analysis of heat transfer phenomenon in blood perfused tissues, Biomedical Sciences Instrumentation 38 (2001), 185-190.
9. L.A. Lang, R.F. Wang, B. Kang and S.N. White, Validation of finite element analysis in dental ceramic research, Journal of Prosthetic Dentistry 86 (2001), 650-654.
10. P. Kamposiora, G. Papavasiliou, S.C. Bayne and D.A. Felton, Finite element analysis estimates of cement microfracture under complete veneer crowns, Journal of Prosthetic Dentistry 71 (1994), 435-441.
11. H.J. Meijer, J.H. Kuiper, F.J. Starmans and F. Bosman, Stress distribution around dental implant: influence of superstructure, length of implants, and height of mandible, Journal of Prosthetic Dentistry 68 (1992), 96-102.
12. J.P. Geng, K.B.C. Tan and G.R. Liu, Application of finite-element analysis in implant dentistry: a review of the literature, Journal of Prosthetic Dentistry 85 (2001), 585-598.
13. C.M. Weiss and A. Weiss, Principles and Practice of Implant Dentistry, 2nd edn, Mosby Publication Company, 1999.
14. S. Canay, N. Hersek, I. Akpinar and Z. Asik, Comparison of stress distribution around vertical and angled implants with finite-element analysis, Quintessence International 27 (1996), 591-598.
15. M. Kregzde, A method of selecting the best implant prosthesis design option using three-dimensional finite element analysis, Journal of Cranio-Maxillofacial Surgery 8 (1993), 662-673.
16. K.R. Williams, C.J. Watson, W.M. Murphy, J. Scott, M. Gregory and D. Sinobad, Finite element analysis of fixed prostheses attached to osseointegrated implants, Quintessence International 21 (1990), 563-570.
17. I. Akpinar, F. Demirel, L. Parnas and S. Sahin, A comparison of stress and strain distribution characteristics of two different rigid implant designs for distal-extension fixed prostheses, Quintessence International 27 (1996), 11-17.
18. E.P. Holmgren, R.J. Seckinger, L.M. Kilgren and F. Mante, Evaluating parameters of osseointegrated dental implants using finite element analysis: a two-dimensional comparative study examining the effects of implant diameter, implant shape, and load direction, Journal of Oral Implantology 24 (1998), 80-88.
19. C.M. Becker and D.A. Kaiser, Implant-retained cantilever fixed prosthesis: where and when, Journal of Prosthetic Dentistry 84 (2000), 432-435.
20. D.M. Hecker and E. Eckert, Cyclic loading of implant-supported prostheses: changes in component fit over time, Journal of Prosthetic Dentistry 89 (2003), 346-351.
21. U. Meyer, D. Vollmer, C. Runte, C. Bourauel and U. Joos, Bone loading pattern around implants in average and atrophic edentulous maxillae: a finite element analysis, Journal of Cranio-Maxillofacial Surgery 29 (2001), 100-105.
22. F.A. Young, K.R. Williams, R. Draughn and R. Strohaver, Design of prosthetic cantilever bridgework supported by osseointegrated implants using the finite element method, Dental Materials 14 (1998), 37-43.
23. R. Skalak, Biomechanical considerations in osseointegrated prosthesis, Journal of Prosthetic Dentistry 49 (1983), 843-848.
24. R.M. Cibirka, M.E. Razzoog, B.R. Lang and C.S. Stohler, Determining the force absorption on quotient for restorative materials used in implant occlusal surfaces, Journal of Prosthetic Dentistry 67 (1992), 361-364.
25. T.W. Korioth and A.R. Johann, Influence of mandibular superstructure shape on implant stresses during simulated posterior biting, Journal of Prosthetic Dentistry 82 (1999), 67-72.
26. A. Sertgöz, Finite element analysis study of the effect of superstructure material on stress distribution in a fixed prosthesis, International Journal of Prosthodontics 10(1) (1997), 19-27.
27. A. Sertgöz and S. Güvener, Finite element analysis of the effect of cantilever and implant length on stress distribution in an implant supported prosthesis, Journal of Prosthetic Dentistry 76 (1996), 165-169.
28. M. Hulterstrom and U. Nilsson, Cobalt chromium as a framework material in implant supported fixed prostheses: A 3-year follow-up, International Journal of Oral Maxillafacial Implants 9 (1994), 165-184.
29. V. Del Valle, G. Faulkner and J. Wolfaardt, Craniofacial osseointegrated implant-induced strain distribution: a numerical study. International Journal of Oral Maxillafacial Implants 12 (1997), 200-210.
30. D. Lundgren, H. Falk and L. Laurell, The influence of number and distribution of occlusal cantilever contacts on closing and chewing forces in dentition with implant-supported fixed prostheses occluding with complete dentures, International Journal of Oral Maxillafacial Implants 4 (1989), 277-283.
31. D. Vollmer, U. Meyer, U. Joos, A. Vegh and J. Piffko, Experimental and finite element study of a human mandible, Journal of Cranio-Maxillofacial Surgery 28 (2000), 91-96.
32. R.L. Sakaguichi and S.E. Borgersen, Nonlinear contact analysis of preload in dental implant screws, International Journal of Oral Maxillafacial Implants 10 (1995), 295-302.
33. I. Lewinstein, L. Banks-Sills and R. Eliasi, Finite element analysis of a new system (IL) for supporting an implant-retained cantilever prosthesis, International Journal of Oral Maxillafacial Implants 10 (1995), 355-366.
34. Y.C. Yang, E. Chang, B.H. Hwang and S.Y. Lee, Biaxial residual stress states of plasma-sprayed hydroxyapatite coatings on titanium alloy substrate, Biomaterials 21 (2000), 1327-1337.
35. S.E. Clift, J. Fisher and C.J. Watson, Finite element stress and strain analysis of the bone surrounding a dental implant: effect of variations in bone modulus, Proceedings of the Institute of Mechanical Engineering: Part H 206 (1992), 233-241.
36. C. Misch and M. Bdiez, Implant-protected occlusion: a biomechanical rationale, Western Society of Periodontics Compendium 3 (1994), 1330.
37. U.R. Benzing, H. Gall and H. Weber, Biomechanical aspects of two different implant-prosthetic concepts for edentulous maxillae, International Journal of Oral Maxillafacial Implants 10 (1995), 188-198.