Micro and mesoscale robotic assembly

Journal of Manufacturing Processes

Volumn 6, Issue 1, 2004, Pages 52-71

  Popa, Dan O ^a   Stephanou, Harry E ^a  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

Mesoscale; Microassembly; Microrobotics; Microscale; Multiscale Manipulation; Parallel Manipulation; Precision Assembly

Indexed keywords

BONDING; CLOSED LOOP CONTROL SYSTEMS; COMPUTER SIMULATION; COSTS; MATHEMATICAL MODELS; PACKAGING; SCANNING ELECTRON MICROSCOPY; WAVELENGTH DIVISION MULTIPLEXING;

MICROASSEMBLY; MICROROBOTICS; MULTISCALE MANIPULATION; PARALLEL MANIPULATION; PRECISION ASSEMBLY;

ROBOTIC ASSEMBLY;

EID: 4043125373     PISSN: 15266125     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1526-6125(04)70059-6     Document Type: Article

References (57)

1. Akella, S.; Huang, W.H.; Lynch, K.M.; and Mason, M.T. (1997). "Sensorless parts feeding with a one joint robot." Algorithms for Robotic Motion and Manipulation, J.-P. Laumond and M. Overmars, eds. Wellesley, MA: A.K. Peters, pp229-237.
2. Bellouard, Y. (2002). "Microrobotics, microdevices based on shape-memory alloys." Encyclopedia of Smart Materials. New York: John Wiley & Sons, pp620-644.
3. Bleuler, H. and Breguet, J.-M. (1998). "Microfactory and microrobotics activities in Europe." Int'l Workshop on Micro-Factory (IWMF), Tsukuba, Japan.
4. Bohringer, K.-F.; Donald, B.R.; Mihailovich, R.; and MacDonald, N.C. (1994). "A theory of manipulation and control for microfabricated actuator arrays." Proc. of IEEE Int'l Conf. on Robotics and Automation (ICRA '94), San Diego, pp826-833.
5. Bohringer, K.-F.; Bhatt, V.; and Goldberg, K. (1995). "Sensorless manipulation using transverse vibrations of a plate." Proc. of IEEE Int'l Conf. on Robotics and Automation (ICRA '95), Nagoya, Japan, pp1989-1996.
6. Boothroyd, G. (1991). Assembly Automation and Product Design. New York: Marcel Dekker.
7. Canny, J. (1986). "A computational approach to edge detection." IEEE Trans. on Pattern Analysis and Machine Intelligence (v8), pp679-698.
8. Chen, J.; Goldberg, K.; Overman, M.H.; Halperin, D.; Bohringer, K.-F.; and Zhuang, Y. (1998). "Shape tolerance in feeding and fixturing." 3rd Int'l Workshop on Algorithmic Foundations of Robotics (WAFR), Houston, TX.
9. Clark, J.V., et al. (2002). "Addressing the needs of complex MEMS design." Proc. IEEE Int'l MEMS Conf., Las Vegas, NV.
10. Cohn, M.B., et al. (1998). "Microassembly technologies for MEMS." SPIE Micromachining and Microfabrication Conf., Santa Clara, CA.
11. Dewhurst, P.; Knight, W.; and Boothroyd, G. (2001). Product Design for Manufacture & Assembly., 2nd ed. New York: Marcel Dekker.
12. Eberhardt, R. and Scheller, T., et al. (1997), "Automated assembly of microoptical components." SPIE Microrobotics and Mycrosystem Fabrication (v3202), Pittsburgh, pp117-127.
13. Erdmann, M. (1996). "An exploration of nonprehensile two-palm manipulation." Int'l Journal of Robotics Research (Dec. 1996).
14. Fearing, R.S. (1995). "Survey of sticking effects for micro-parts." IEEE Conf. on Robotics and Intelligent Systems (IROS '95), Pittsburgh.
15. Fukuda, T.; Arai, F.; and Dong, L. (2001). "Nano robotic world from micro to nano." Proc. of IEEE Conf. on Robotics and Automation (ICRA '01), Seoul, Korea.
16. Goldberg, K.; Bohringer, K.-F.; and Fearing, R. (1999). "Microassembly." Handbook of Industrial Robotics, 2nd ed., S. Nof, ed. New York; John Wiley & Sons, pp 1045-1066.
17. Gonzalez, R.C. (1992). Digital Image Processing, 2nd ed. Reading, MA: Addison-Wesley.
18. Goodman, J.W. (2001). "Ten questions that prove the vitality of photonics." Stanford Photonics Research Center Symp.
19. Hirano, T. and Furata, K. (2002). "Micromachine technology trends in microfactory." Int'l Workshop on Micro-Factory (IWMF), Minneapolis.
20. Hohn, Michael and Robl, Christian (1999). "Qualification of standard industrial robots for microassembly." Proc. of ICRA, Detroit.
21. Hollis, R. and Quaid, A. (1995). "An architecture for agile assembly." American Society of Precision Engg. 10th Annual Meeting.
22. Igl, S.A. (1997). "Automated assembly of parallel fiber optic cables." Electronic Components and Technology Conf., pp404-409.
23. Jang, S. (2000). "Automation manufacturing systems technology for opto-electronic device packaging." Electronic Components and Technology Conf., pp 10-14.
24. Kaneko, S. (2000). "Novel fiber alignment method using a partially metal-coated fiber in a silicon V-groove." IEEE Photonics Technology Letters (v12, n6), pp645-647.
25. Karioja, P. (2000). "Comparison of active and passive fiber alignment techniques for multimode laser pigtailing." Electronic Components and Technology Conf., pp244-249.
26. Larsen, P.L. (1999). "Laser tweezers." PhD thesis. Williamsburg, VA: College of William and Mary.
27. Latombe, J. (1991). Robot Motion Planning. Kluwer.
28. Lee, W.H. and Kang, B.H., et al. (2002). "Micropeg manipulation with a compliant microgripper." in Proc. of IEEE Conf. on Robotics and Automation, Washington, DC.
29. Luntz, J., et al. (1999). "Discrete actuator array vectorfield design for distributed manipulation." Proc. of IEEE Int'l Conf. on Robotics and Automation (ICRA '99), pp2253-2241.
30. Marcuse, D. (1977). "Loss analysis of single-mode fiber splices." Bell System Technical Journal (v56, n5), pp703-718.
31. Mikawa, Masahiko (1996). "Visual servoing for micro mass axis alignment device." IEEE/RSJ Int'l Conf. on Intelligent Robots and Systems (IROS), pp1091-1096.
32. Peshkin, M.A. and Sanderson, A.C. (1988). "Planning robotic manipulation strategies for workpieces that slide." IEEE Journal of Robotics and Automation (Oct. 1988), pp524-531.
33. Popa, D.; Kang, B.H.; and Sin, J. (2002). "Reconfigurable microassembly system for photonics applications." IEEE Conf. on Robotics and Automation, Washington, DC.
34. Popa, D., et al. (2003). "Dynamic modeling and open-loop control of thermal bimorph MEMS actuators." IEEE Conf. on Robotics and Automation, Taipei, Taiwan.
35. Popa, D., et al. (2004). "Dynamic modeling and input shaping for MEMS." Proc. of NSTI Nanotechnology Conf. and Trade Show (v2), Boston, March 2004, pp315-318.
36. Potsaid, B.; Bellouard, Y.; and Wen, J.T. (2002). "Scanning optical mosaic scope for micro-manipulation." Int'l Workshop on Micro-Factory (IWMF), Minneapolis.
37. Prasad, R.; Bohringer, K.-F.; and MacDonald, N.C. (1995). "Design, fabrication, and characterization of single crystal silicon latching snap fastners for micro assembly." ASME Int'l Mechanical Engg. Congress and Exposition (IMECE '95), San Francisco.
38. Reznik, D. and Canny, J. (1998). "A flat rigid plate is a universal planar manipulator." IEEE Int'l Conf. on Robotics and Automation (ICRA '98), Leuven, Belgium.
39. Rizzi, A.A.; Gowdy, J.; and Hollis, R.L. (1997). "Agile assembly architecture: an agent-based approach to modular precision assembly systems." Proc. of IEEE Int'l. Conf. on Robotics and Automation (v2), pp 1511-1516.
40. Rizzi, A.A. and Hollis, R.L. (1998). "Opportunities for increased intelligence and autonomy in robotic systems for manufacturing." Robotics Research, 8th Int'l Symp. of Robotics Research, Hayama, Japan, Y. Shirai and S. Hirose, eds. Springer-Verlag, pp141-151.
41. Selli, R.K. and Berglund, Sidney (1998). "Novel V-groove-based interconnect technology." Society of Photo-Optical Instrumentation Engineers (v37, n 12, Dec. 1998), pp3134-3142.
42. Serra, J. (1982). Image Analysis and Mathematical Morphology. Academic Press.
43. Shakespeare, W.J. (2002). "Optical alignment in optoelectronic components." Advancing Microelectronics (v29, nl, Jan./Feb. 2002).
44. Shimada, E.; Thompson, J.A.; Yan, J.; Wood, R.; and Fearing, R.S. (2000). "Prototyping millirobots using dextrous microassembly and folding." ASME Int'l Mechanical Engg. Congress and Exposition (IMECE '00), Orlando, FL.
45. Sin, J.; Popa, D.; and Stephanou, H. (2002). "Model based automatic fiber alignment." Proc. of SMTA NEPCON West Conf., San Diego.
46. Singer, N.C. and Seering, W.P. (1989). "Design and comparison of command shaping methods for controlling residue vibrations." IEEE Intl. Conf. on Robotics and Automation, Scottsdale, AZ.
47. Singh, S.K. and Popa, D. (1995). "An analysis of some fundamental problems in adaptive control of force and impedance behaviour: theory and experiments." IEEE Journal of Robotics and Automation (Dec. 1995).
48. Skidmore, G. and Parker, E., et al. (2000). "Exponential assembly." 8th Foresight Conf. on Molecular Nanotechnology.
49. Stephanou, H.E.; Sin, J.; and Winther, K.T. (2001), "Micromanipulation using a friction force field." IEEE Int'l Conf. on Robotics and Automation, Seoul, Korea.
50. Strand, O.T. and Lowry, M.E. (1994). "Automated fiber pigtailing technology." Electronic Components and Technology Conf., pp 1000-1003.
51. Tahhan, Isam N.; Zhuang, Yan; Bohringer, Karl F.; Pister, Kris S.J.; and Goldberg, Ken (1999). "MEMS fixtures for handling and assembly of microparts." SPIE 1999 Symp. on Micromachining and Microfabrication, Santa Clara, CA.
52. van der Stappen, A.F.; Berretty, R.-P.; Goldberg, K.; and Overmars, M.H. (2001). "Geometry and part feeding." Modelling of Sensor-Based Intelligent Robot Systems, H. Bunke, H.I. Christensen, G. Hager, and R. Klein, eds. Lecture Notes in Computer Science. Berlin: Springer Verlag.
53. Wen, J.T. and Potsaid, B. (2002). "Input shaping for motion control." CAT Report. Troy, NY: Rensselaer Polytechnic Institute, May 2002.
54. Whitney, D. (1982). "Quasi-static assembly of compliantly supported rigid parts." ASME Journal of Dynamic Systems, Measurement, and Control (v104), pp65-77.
55. Witham, C.R. (2000). "Fiber-optic pigtail assembly and attachment alignment shift using a low-cost robotic platform." Electronic Components and Technology Conf., pp21-25.
56. Yang, Ge; Gaines, James A.; and Nelson, Bradley J. (2000). "Open-structure reconfigurable experimental work-station for fast and reliable microassembly." SPIE Microrobotics and Microassembly II Conf., Boston, pp21-32.
57. Zhou, Yu; Nelson, Bradley J.; and Vikramaditya, Barmeshwar (1998). "Rising force and vision feedback for micromanipulation." Proc. of IEEE Conf. on Robotics and Automation (ICRA '98), Leuven, Belgium.