A methodology to determine work material flow stress and tool-chip interfacial friction properties by using analysis of machining

Journal of Manufacturing Science and Engineering

Volumn 128, Issue 1, 2006, Pages 119-129

  Özel, Tuǧrul ^a   Zeren, Erol ^a  

^a DEPARTMENT OF INDUSTRIAL AND SYSTEMS ENGINEERING   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FRICTION; INTERFACES (MATERIALS); MACHINING; MATERIALS SCIENCE; MATHEMATICAL MODELS; STRESS CONCENTRATION;

PLASTIC CONTACT; SPLIT-HOPKINSON PRESSURE BAR (SHPB); TEMPERATURE MODELS; TOOL-CHIP INTERFACE;

PLASTIC FLOW;

EID: 33645289397     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2118767     Document Type: Article

References (31)

1. Ernst, H., and Merchant, M. E., 1941, "Chip Formation, Friction and High Quality Machined Surfaces," Trans. Am. Soc. Met., 29, pp. 299-378.
2. Lee, E. H., and Shaffer, B. W., 1951, "The Theory of Plasticity Applied to a Problem of Machining," J. Appl. Mech., 18, pp. 405-413.
3. Zorev, N. N., 1963, "Inter-Relationship Between Shear Processes Occurring Along Tool Face and Shear Plane in Metal Cutting," International Research in Production Engineering, ASME, New York, pp. 42-49.
4. Tay, A. O., Stevenson, M. G., and de Vahl Davis, M. G., 1974, "Using the Finite Element Method to Determine Temperature Distributions in Orthogonal Machining," Proceedings of the Institution for Mechanical Engineers, 188, pp. 627-638.
5. Usui, E., and Shirakashi, T., 1982, "Mechanics of Machining: From Descriptive to Predictive Theory," On the Art of Cutting Metals-75 Years Later, ASME, New York, FED 7, pp. 13-35.
6. Oxley, P. L. B., 1989, Mechanics of Machining, an Analytical Approach to Assessing Machinability, Ellis Horwood Limited.
7. Özel, T., and Allan, T., 2000, "Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High-Speed Cutting," Int. J. Mach. Tools Manuf., 40/1, pp. 133-152.
8. Childs, T. H. C., 1998, "Material Property Needs in Modeling Metal Machining," in Proceedings of the CIRP International Workshop on Modeling of Machining Operations. Atlanta, Georgia, May 19, pp. 193-202.
9. Jaspers, S. P. F. C., and Dautzenberg, J. H., 2002, "Material Behavior in Conditions Similar to Metal Cutting: Flow Stress in the Primary Shear Zone," J. Mater. Process. Technol., 122, pp. 322-330.
10. Adibi-Sedeh, A. H., Madhavan, V., and Bahr, B., 2003, "Extension of Oxley's Analysis of Machining to Use Different Material Models," ASME J. Manuf. Sci. Eng., 125, pp. 656-666.
11. Davies, M. A., Cao, Q., Cooke, A. L., and Ivester, R., 2003, "On the Measurement and Prediction of Temperature Fields in Machining 1045 Steel," CIRP Ann., 52(1), pp. 77-80.
12. Özel, T., and Altan, T., 2000, "Process Simulation Using the Finite Element Method: Prediction of Cutting Forces, Tool Stresses and Temperatures in High-Speed Flat End Milling Process," Int. J. Mach. Tools Manuf., 40/5, pp. 713-738.
13. Johnson, G. R., and Cook, W. H., 1983, "A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures," Proceedings of the 7th International Symposium on Ballistics, The Hague, The Netherlands, pp. 541-547.
14. Zerilli, F. J., and Armstrong, R. W., 1987, "Dislocation-Mechanics- Based Constitutive Relations for Material Dynamics Calculations," J. Appl. Phys., 61(5), pp. 1816-1825.
15. Hamann, J. C., Grolleau, V., and Le Maitre, F., 1996, "Machinability Improvement of Steels at High Cutting Speeds - Study of Tool/Work Material Interaction," CIRP Ann., 45, pp. 87-92.
16. Lee, W. S., and Lin, C. F., 1998, "High-Temperature Deformation Behavior of Ti6AL4V Alloy Evaluated by High Strain-Rate Compression Tests," J. Mater. Process. Technol., 75, pp. 127-136.
17. Meyer Jr, H. W., and Kleponis, D. S., 2001, "Modeling the High Strain Rate Behavior of Titanium Undergoing Ballistic Impact and Penetration," Int. J. Impact Eng., 26, pp. 509-521.
18. Shatla, M., Kerk, C., and Altan, T., 2001, "Process Modeling in Machining. Part I: Determination of Flow Stress Data," Int. J. Mach. Tools Manuf., 41, pp. 1511-1534.
19. Tounsi, N., Vincenti, J., Otho, A., and Elbestawi, M. A., 2002, "From the Basic Mechanics of Orthogonal Metal Cutting Toward the Identification of the Constitutive Equation," Int. J. Mach. Tools Manuf., 42, pp. 1373-1383.
20. Adibi-Sedeh, A. H., and Madhavan, V., 2002, "Effect of Some Modifications to Oxley's Machining Theory and the Applicability of Different Material Models," Mach. Sci. Technol., 6(3), pp. 379-395.
21. Lee, L. C., Liu, X., and Lam, K. Y., 1995, "Determination of Rake Stress Distribution in Orthogonal Machining," Int. J. Mach. Tools Manuf., 35(3), pp. 373-382.
22. Huang, Y., and Liang, S. Y., 2003, "Cutting Forces Modeling Considering the Effect of Tool Thermal Property-Application to CBN Hard Turning," Int. J. Mach. Tools Manuf., 43, pp. 307-315.
23. Trigger, K. J., and Chao, B. T., 1951, "An Analytical Evaluation of Metal Cutting Temperatures," Trans. ASME, 73, pp. 57-68.
24. Chao, B. T., and Trigger, K. J., 1953, "The Significance of the Thermal Number in Metal Machining," Trans. ASME, 75, pp. 109-120.
25. Leowen, E. G., and Shaw, M. C., 1954, "On the Analysis of Cutting Tool Temperatures," Trans. ASME, 71, pp. 217-231.
26. Leone, W. C., 1954, "Distribution of Shear Zone Heat in Metal Cutting," Trans. ASME, 76, pp. 121-125.
27. Boothroyd, G., 1963, "Temperatures in Orthogonal Metal Cutting." Proc. Inst. Mech. Eng., 177, pp. 789-802.
28. Komanduri, R., and Hou, Z. B., 2000, "Thermal Modeling of the Metal Cutting Process, Part I: Temperature Rise Distribution Due to Shear Plane Heat Source," Int. J. Mech. Sci., 42, pp. 1715-1752.
29. Ivester, R. W., Kennedy, M., Davies, M., Stevenson, R., Thiele, J., Furness, R., and Athavale, S., 2000, "Assessment of Machining Models: Progress Report," Mach. Sci. Technol., 4(3), pp. 511-538.
30. Bates, D., and Watts, D., 1988, Nonlinear Regression Analysis and its Applications, Wiley, New York, pp. 271-272.
31. Barry, J., Byrne, G., and Lennon, D., 2001, "Observations on Chip Formation and Acoustic Emission in Machining Ti-6Al-4V Alloy," Int. J. Mach. Tools Manuf., 41, 1055-1070.