Finite element modeling of stresses induced by high speed machining with round edge cutting tools

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 16-2, Issue , 2005, Pages 1279-1287

  Özel, Tuǧrul ^a   Zeren, Erol ^a  

^a DEPARTMENT OF INDUSTRIAL AND SYSTEMS ENGINEERING   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ARBITRARY LAGRANGIAN EULERIAN (ALE); EDGE CUTTING TOOLS; HIGH SPEED MACHINING (HSM); JOHNSON-COOK MODEL;

CUTTING EQUIPMENT; FINITE ELEMENT METHOD; FRICTION; MICROHARDNESS; PLASTIC DEFORMATION; POLISHING; RESIDUAL STRESSES; STRENGTH OF MATERIALS; TITANIUM ALLOYS;

MACHINING;

EID: 33646002639     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2005-81046     Document Type: Conference Paper

References (37)

1. Usui, E. and Shirakashi, T., 1982, "Mechanics of machining -from descriptive to predictive theory. In on the art of cutting metals-75 years later," ASME Publication PED, 7, 13-35.
2. Komvopoulos K. and Erpenbeck, S.A., 1991, "Finite element modeling of orthogonal metal cutting," ASME Journal of Engineering for Industry, 113, 253-267.
3. Lin, Z. C. and Lin, S. Y., 1992, "A couple finite element model of thermo-elastic-plastic large deformation for orthogonal cutting," ASME Journal of Engineering for Industry, 114, 218-226.
4. Zhang, B. and Bagchi, A., 1994, "Finite element simulation of chip formation and comparison with machining experiment," ASME Journal of Engineering for Industry, 116, 289-297.
5. Shih, A. J., 1995, "Finite element simulation of orthogonal metal cutting," ASME Journal of Engineering for Industry, 117, 84-93.
6. Strenkowski, J.S. and Carroll, J.T., 1985, "A finite element model of orthogonal metal cutting," ASME Journal of Engineering for Industry, 107, 346-354.
7. Strenkowski, J.S. and Carroll, J.T., 1986, "Finite element models of orthogonal cutting with application to single point diamond turning," International Journal of Mechanical Science, 30, 899-920.
8. Black, J. T. and Huang, J. M., 1996, "An evaluation of chip separation criteria for the fern simulation of machining", ASME Journal of Manufacturing Science and Engineering, 118, 545-553.
9. Sekhon, G.S. and Chenot, J.L., 1992, "Some Simulation Experiments in Orthogonal Cutting," Numerical Methods in Industrial Forming Processes, 901-906.
10. Marusich, T.D. and Ortiz, M., 1995, "Modeling and simulation of high-speed machining," International Journal for Numerical Methods in Engineering, 38, 3675-3694.
11. Ceretti, E., Fallböhmer, P., Wu, W.T. and Altan, T., 1996, "Application of 2-D FEM to chip formation in orthogonal cutting," Journal of Materials Processing Technology, 59, 169-181.
12. Leopold, J., Semmler, U. and Hoyer, K., 1999, "Applicability, robustness and stability of the finite element analysis in metal cutting operations," Proceedings of the 2nd CIRP International Workshop on Modeling of Machining Operations, 81-94, Nantes, France, Jan. 1999.
13. Özel, T. and Altan, T., 2000, "Determination of workpiece flow slress and friction at the chip-tool contact for high-speed cutting," International Journal of Machine Tools and Manufacture, 40/1, 133-152.
14. Madhavan, V., Chandrasekar, S. and Farris, T.N., 2000, "Machining as a wedge indentation," Journal of Applied Mechanics, 67, 128-139.
15. Klocke F., Raedt, H.-W. and Hoppe, S., 2001, "2D-FEM simulation of the orthogonal high speed cutting process," Machining Science and Technology, 5/3, 323-340.
16. Baker, M., Rosler, J. and Siemers, C., 2002, "A finite element model of high speed metal cutting with adiabatic shearing," Computers and Structures, 80, 495-513.
17. Rakotomalala, R., Joyot, P. and Touratier, M., 1993, "Arbitrary Lagrangian-Eulerian thermomechanical finite element model of material cutting," Communications in Numerical Methods in Engineering, 9, 975-987.
18. Olovsson, L., Nilsson, L., and Simonsson, K., 1999, "An ALE Formulation for the Solution of Two-Dimensional Metal Cutting Problems," Computers and Structures, 72, 497-507.
19. Movahhedy, M. R., Gadala, M. S., and Altintas, Y., 2000, "FE Modeling of Chip Formation in Orthogonal Metal Cutting Process: An ALE Approach," Machining Science and Technology, 4, 15-47.
20. Movahhedy, M.R., Altintas, Y. and Gadala, M.S., 2002, "Numerical analysis of metal cutting with chamfered and blunt tools," ASME Journal of Manufacturing Science and Engineering, 124, 178-188.
21. Adibi-Sedeh, A.H., and Madhavan, V., 2003, "Understanding of finite element analysis results under the framework of Oxley's machining model," Proceedings of the 6th CIRP International Workshop on Modeling of Machining Operations, Hamilton, Canada.
22. Haglund, A.J., Kishawy, H.A. and Rogers, R.J., "On Friction Modeling in Orthogonal Machining: An Arbitrary Lagrangian-Eulerian Finite Element Model," Transactions of NAMRI/SME, 33, 589-596.
23. th CIRP International Workshop on Modeling of Machining Operations, Chemnitz, Germany, 533-542.
24. Özel, T., 2003, "Modeling of Hard Part Machining: Effect of Insert Edge Preparation for CBN Cutting Tools," Journal of Materials Processing Technology, 141, 284-293.
25. Yen, Y-C., Jain A. and Altan T., 2004, "A finite element analysis of orthogonal machining using different toll edge geometries," Journal of Material Processing Technology, 146/1, 72-81.
26. Chuzhoy, L., DeVor, R.E. and Kapoor, S.G., 2003, "Machining Simulation of Ductile Iron and Its Constituents. Part 2: Numerical Simulation and Experimental Validation of Machining," ASME Journal of Manufacturing Science and Engineering, 125, 192-201.
27. Yang, X. and Liu, C. R., 2002, "A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element method," International Journal of Mechanical Sciences, 44/4, 703-723.
28. Liu, C.R. and Guo, Y.B., 2000, "Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer," Int. J. Mech. Sci., 42, 1069-1086.
29. Guo, Y. B. and Liu, C. R., 2002, "3D FEA Modeling of Hard Turning," ASME Journal of Manufacturing Science and Engineering, 124, 189-199.
30. Guo, Y.B. and Wen, Q, 2005, "A Hybrid Modeling Approach to Investigate Chip Morphology Transition with The Stagnation Effect by Cutting Edge Geometry," Transactions of NAMRI/SME, 33, 469-476.
31. Davies, M.A., Cao, Q., Cooke, A.L. and Ivester, R., 2003, "On the measurement and prediction of temperature fields in machining of AISI 1045 steel," Annals of the CIRP, 52/1, 77-80.
32. Deshayes, L., Ivester, R., Mabrrouki, T., and Rigal, J-F, 2004, "Serrated chip morphology and comparison with Finite Element simulations," Proceedings of IMECE 2004, November 13-20, 2004, Anaheim, California, USA.
33. Johnson, G.R. and W.H. Cook, 1983, "A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures," Proceedings of the 7th International Symposium on Ballistics, The Hague, The Netherlands, 541-547.
34. Jaspers, S.P.F.C and Dautzenberg, J.H., 2002, "Material behavior in conditions similar to metal cutting: flow stress in the primary shear zone," Journal of Materials Processing Technology, 122, 322-330.
35. Ng, E.-G., Tahany I. E.W., Dumitrescu, M., and Elbastawi, M.A., 2002, "Physics-based simulation of high speed machining," Machining Science and Technology, 6/3, 301-329.
36. Meyer H.W. Jr. and Kleponis, D. S., 2001, "Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration," International Journal of Impact Engineering, 26, 509-521.
37. Özel, T. and Zeren, E., 2004, "A Methodology to Determine Work Material Flow Stress and Tool-Chip Interfacial Friction Properties by Using Analysis of Machining," Proceedings of IMECE'04, November 13-19, 2004, Anaheim, California, USA.