In-situ characterization of moisture absorption and desorption in a thin BT core substrate

Proceedings - Electronic Components and Technology Conference

Volumn , Issue , 2007, Pages 1375-1383

  He, Yi ^a   Fan, Xuejun ^a  

^a INTEL CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DESORPTION; ELECTRONICS PACKAGING; GLASS FIBERS; MOISTURE DETERMINATION; SURFACE DIFFUSION; THIN FILMS;

BISMALEIMIDE-TRIAZINE (BT); MICROELECTRONIC PACKAGING; MOISTURE ABSORPTION; MOISTURE DIFFUSIVITY;

LAMINATES;

EID: 35348832840     PISSN: 05695503     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ECTC.2007.373974     Document Type: Conference Paper

References (30)

1. nd ed, edited by E. A. Turi, Ch. 6, pp.1702-1704, Academic Press, New York, 1997.
2. V. B. Gupta, L. T. Drzal, and M. J. Rich, "The physical basis of moisture transport in a cured epoxy resin system", J. Appl. Polym. Sci., Vol. 30, No. 11 (1985), pp. 4467-4493.
3. Y. C. Lin, and X. Chen, "Moisture sorption-desorption-resorption characteristics and its effect on the mechanical behavior of the epoxy system", Polymer, Vol. 46, No. 25 (2005), pp. 11994-12003.
4. Y. He, unpublished results, Intel Corporation, 2004; also, T. Caskey, G. Oskarsdottir, and Y. He, internal presentation, Intel Polymer Workshop, Nov. 2004.
5. E. Stellrecht, B. T. Han, and M. G. Pecht, "Characterization of hygroscopic swelling behavior of mold compounds and plastic packages", IEEE Trans. Comp. Packag. Technol., Vol. 27, (2004), pp. 499-506.
6. H. Ardebili, E. H. Wong, and M. Pecht, "Hygroscopic swelling and sorption characteristics of epoxy molding compounds used in electronic packaging", IEEE Trans. Comp. Packag. Technol., Vol. 26, No. 1 (2003) pp. 206-214.
7. Y. He and X. J. Fan, unpublished results, Intel Corporation, 2005.
8. I. Fukuzawa, S. Ishiguro, and S. Nanbu, "Moisture resistance degradation of plastic LST's by reflow soldering", Proc. 23rd International Reliability Phys. Symp., pp. 192-197, 1985.
9. J. E. Galloway and B. M. Miles, "Moisture absorption and desorption predictions for plastic ball grid array packages", IEEE Trans. Comp. Packag. Manuf. Technol. A, Vol. 20, No. 3 (1997), pp. 274-279.
10. C. E. Park, B. J. Han, and H. E. Bair, "Humidity effect on adhesion strength between solder ball and epoxy underfills", Polymer, Vol. 38, No. 15 (1997), pp. 3811-3818.
11. M. Teo, S. G. Mhaisalker, E. H. Wong, P.-S. Teo, C. C. Wong, K. Ong, C. F. Goh, and L. K. Teh, "Correlation of material properties to reliability performance of anisotropic conductive adhesive flip chip packages", IEEE Trans. Comp. Packag. Technol., Vol. 28, No. 1 (2005), pp. 157-164.
12. Z. F. Li, "A review of BT/epoxy resin - chemistry, composition, processing, properties, and applications", internal project report, Intel Corporation, July 1995.
13. M. Pecht, H. Ardebili, A. A. Shukla, J. K. Hagge, and D. Jennings, "Moisture ingress into organic laminates", IEEE Trans. Comp. Packag. Technol., Vol. 22, No. 1 (1999), pp. 104-110.
14. Xuejun Fan, Ibrahim Bekar, Anthony A. Fischer, Yi He, Zhenyu Huang, and Edward R. Prack, "Delamination/cracking root cause mechanisms for ultrathin stacked die chip scale packages", Intel Manufacturing Excellence Conference (IMEC) 2006 technical paper.
15. Zhenyu Huang, John Tang, Changmin Hu, Michael Wang, Mu Zhang, Bin Liu, Xuejun Fan, and Edward Prack, "Moisture induced cohesive delamination in dieattach film in ultra thin stacked chip-scale package", Intel Assembly Test Tech. J., 2006.
16. ASTM D5229, Standard Test Method For Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials, ASTM 1998.
17. 0.75], where h is the total thickness. See also, C. H. Shen, and G. S. Springer, "Moisture absorption and desorption of composite materials", J. Compos. Mater., Vol. 10, No. 1 (1976), pp. 2-10;
18. T. Ferguson and J. Qu, "Moisture absorption analysis of interfacial fracture test specimens composed of no-flow underfill materials", J. Electron. Packag.: Trans. ASME, Vol. 125, No. 1 (2003), pp. 24-30.
19. nd ed., Oxford University Press, Oxford, 1990.
20. R. J. Borg and G. J. Dienes, An Introduction to Solid State Diffusion, Academic Press, Inc., San Diego, 1988, p.60.
21. Yi He, unpublished results, Intel Corporation, 2006.
22. Technical Brochure, TA Instruments Q Series™ Thermal Analyzers; http://www.tainstruments.com/Default.asp.
23. Xiaodong Tang, John D. Whitcomb, Yanmei Li, and Hung-Jue Sue, "Micromechanics modeling of moisture diffusion in woven composites", Compos. Sci. Technol., Vol. 65, (2005), pp. 817-826.
24. X. J. Fan, Moisture Related Reliability Issues in Electronic Packaging, ECTC short course, 2006.
25. Li-Rong Bao, A. F. Yee, Effect of Temperature on Moisture Absorption in a Bismaleimide Resin and Its Carbon Fiber Composites, Polymer, Vol. 43, No. 14 (2002), pp. 3987-3997, and refs. [11-14] cited in this paper.
26. 3, n = 0.12/18 = 0.0067 mole, R = 8.314 J/mol-K is the universal gas constant, for T = 60°C or 333 K, p is estimated to be 18.549 MPa, which is ∼183 atm.
27. P. C. Liu, D. W. Wang, E. D. Livingston, and W. T. Chen, "Moisture absorption behavior of printed circuit laminate materials, advances in electronic packaging", Proc. of the 1993 ASME International Electronics Packaging Conf., Vol. 1, 435-442, American Society of Mechanical Engineers, September 29-Oct. 2, 1993, Binghamton, NY. Also quoted in ref. 12.
28. 2/s. Also, private communication with E. H. Wong, 2006].
29. Bin Xie, Daniel Shi, and Xuejun Fan, "Sensitivity investigation of reflow profile and substrate thickness on wafer level film failures in 3-D chip scale packages by finite element modeling", IEEE Electronic Components and Technology Conference (ECTC), 2007.
30. Xuejun Fan, Daniel Shi, Ibrahim Bekar, Edward Prack, Jianfeng Wang, Zhenyu Huang, Yi He, and Anthony Fischer, "Dicing tape format die-attach film selection methodology for ultra-thin stacked die chip scale packages", IEEE Electronic Components and Technology Conference (ECTC), 2007.