Indentation fatigue behaviour of polycrystalline copper

Mechanics of Materials

Volumn 39, Issue 12, 2007, Pages 1066-1080

  Xu, B X ^a   Yue, Z F ^a   Wang, J ^b  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

^b QUEEN'S UNIVERSITY BELFAST   (United Kingdom)

Author keywords

Cyclic loading; Fatigue crack propagation; Indentation depth propagation; Indentation experiment; Microstructure; Polycrystalline copper

Indexed keywords

COPPER; CRACK PROPAGATION; CYCLIC LOADS; FATIGUE TESTING; INDENTATION; MICROSTRUCTURE; NUCLEATION; OPTICAL MICROSCOPY; SCANNING ELECTRON MICROSCOPY;

DEPTH PROPAGATION; LOAD-DEPTH CURVE; STATIC LOADING; STEADY STATE;

POLYCRYSTALLINE MATERIALS;

EID: 34548336821     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2007.06.001     Document Type: Article

References (66)

1. Abdel-Karim M. Numerical integration method for kinematic hardening rules with partial activation of dynamic recovery term. International Journal of Plasticity 21 (2005) 1303-1321
2. Bari S., and Hassan T. Anatomy of coupled constitutive models for ratcheting simulation. International Journal of Plasticity 16 (2000) 381-409
3. Bocciarelli M., Bolzon G., and Maier G. Parameter identification in anisotropic elastoplasticity by indentation and imprint mapping. Mechanics of Materials 37 (2005) 855-868
4. Borrego L.P., Ferreira J.M., Pinho da Cruz J.M., and Cost J.M. Evaluation of overload effects on fatigue crack growth and closure. Engineering Fracture Mechanics 70 (2003) 1379-1397
5. Cairney J.M., Tsukano R., Hoffman M.J., and Yang M. Degradation of TiN coatings under cyclic loading. Acta Materialia 52 (2004) 3229-3237
6. Carvalho N.J.M., and Hosson J.T.M.D. Deformation mechanisms in TiN/(Ti,Al)N multilayers under depth-sensing indentation. Acta Materialia 54 (2006) 1857-1862
7. Chaboche J.L., and Nouaihas D. Constitutive modelling of ratcheting effects - Part I: experimental facts and properties of the classical models. Journal of Engineering Materials and Technology 111 (1989) 384-392
8. Chaboche J.L., and Nouaihas D. Constitutive modelling of ratcheting effects - Part II: possibilities of some additional kinematic rules. Journal of Engineering Materials and Technology 111 (1989) 409-416
9. Chen X., and Jiao R. Modified kinematic hardening rule for multiaxial ratcheting prediction. International Journal of Plasticity 20 (2004) 871-898
10. Cheng Y.T., and Cheng C.M. Relationships between hardness, elastic modulus, and the work of indentation. Applied Physics Letters 73 (1998) 614-616
11. Chu S.N.G., and Li J.C.M. Delayed retardation of overloading effect of impression fatigue. Journal of Engineering Materials and Technology 10 (1980) 2337-2340
12. Dao N., Chollacoop N., van Vliet K.J., Venkatesh T.A., and Suresh S. Computational modeling of the forward and reverse problem in instrumented sharp indentation. Acta Materalia 49 (2001) 3899-3918
13. Dorothee D., Klaus R., Bridit S., Bernhard S., and Gunther E. Creep of a TiAl alloy: a comparison of indentation and tensile testing. Materials Science and Engineering A 357 (2003) 346-354
14. Giannakopoulos A.E., and Suresh S. Determination of elastoplastic properties by instrumented sharp indentation. Scripta Materialia 40 (1999) 1191-1198
15. Gogotsi Y.G., Domnich V., Dub S.N., Kailera A., and Nickel K.G. Cyclic nanoindentation and Raman microspectroscopy study of phase transformations in semiconductors. Journal Materials Research 15 (2000) 871-879
16. Hill R. Mathematical Theory of Plasticity (1998), Oxford University Press, USA
17. Huang H.L., and Ho N.J. The model of crack propagation in polycrystalline copper at various propagating rates. Materials Science and Engineering A 293 (2000) 7-14
18. Huang H.L., and Ho N.J. The observation of dislocation reversal in front of crack tips of polycrystalline copper after reducing maximum load. Materials Science and Engineering A 345 (2003) 215-222
19. Hyde T.H., Yehia K.A., and Becker A.A. Application of the reference stress method for interpreting impression creep test date. Materials at High Temperature 13 (1995) 133-138
20. Hyde T.H., Sun W., and Becker A.A. Analysis of the impression test method using a rectangular indenter for determining the creep properties in weld. International Journal of Mechanical Science 38 (1995) 1089-1102
21. Jang J., Lance M.J., Wen S.Q., Tsui T.Y., and Pharr G.M. Indentation-induced phase transformations in silicon: influences of load, rate and indenter angle on the transformation behavior. Acta Materialia 53 (2005) 1759-1770
22. Jayaraman S., Hahn G.T., Oliver W.C., Rubin C.A., and Bastias P.C. Determination of monotonic stress-strain curve of hard materials from ultra-low-load indentation tests. International Journal of Solids and Structures 35 (1998) 365-381
23. Kang G.Z. A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation. Mechanics of Materials 36 (2004) 299-312
24. Kang G.Z., Gao Q., and Yang X.J. A visco-plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratcheting of SS304 stainless steel at room temperature. Mechanics of Materials 34 (2002) 521-531
25. Kang G.Z., Kan Q.H., Zhang J., and Sun Y.F. Time-dependent ratcheting experiments of SS304 stainless steel. International Journal of Plasticity 22 (2006) 858-894
26. Kaszynski P., Ghorbel E., and Marquis D. An experimental study of ratcheting during indentation of 316L stainless steel. Journal of Engineering Materials and Technology 120 (1998) 218-223
27. Khoei A.R., and Jamali N. On the implementation of a multi-surface kinematic hardening plasticity and its applications. International Journal of Plasticity 21 (2005) 1741-1770
28. Kim J.-J., Choi Y., Suresh S., and Argon A.S. Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature. Science 295 (2002) 654-657
29. Krempl E., and Khan F. Rate (time)-dependent deformation behaviour: an overview of some properties of metals and solid polymers. International Journal of Plasticity 19 (2003) 1069-1095
30. Kulkarni S.C., Desai Y.M., Kant T., Reddy G.R., Prasad P., Vaze K.K., and Gupta C. Uniaxial and biaxial ratcheting in piping materials-experiments and analysis. International Journal of Pressure Vessels and Piping 81 (2004) 609-617
31. Kumar R., Kumar A., and Kumar S. Delay effects in fatigue crack propagation. International Journal of Pressure Vessels and Piping 61 (1996) 1-5
32. Larsson J., and Storåkers B. Oblique indentation of creeping solids. European Journal of Mechanics A/Solids 19 (2000) 565-584
33. Lawn B., and Wilshaw R. Indentation fracture: principles and applications. Journal Materials Science 10 (1975) 1049-1081
34. Lee H., Lee J.H., and Pharr G.M. A numerical approach to spherical indentation techniques for material property evaluation. Journal of the Mechanics and Physics of Solids 53 (2005) 2037-2069
35. Li J.C.M. Impression creep and other localized tests. Materials Science and Engineering A 322 (2002) 23-42
36. Li J.C.M., and Chu S.N.G. Impression fatigue. Scripta Materialia 13 (1979) 1021-1026
37. Nayebi A., El Abdi R., Bartier O., and Mauvoisin G. New procedure to determine steel mechanical parameters from the spherical indentation technique. Mechanics of Materials 34 (2002) 243-254
38. Ohno N. Recently topics in constitutive modelling of cyclic plasticity and viscoplasticity. Applied Mechanics Reviews 43 (1990) 283-295
39. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal Materials Research 7 (1992) 1564-1583
40. Oliver W.C., and Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. Journal Materials Research 19 (2004) 3-20
41. Ossa E.A., Deshpande V.S., and Cebon D. Spherical indentation behaviour of bitumen. Acta Materialia 53 (2005) 3103-3113
42. Pane I., and Blank E. Role of plasticity on indentation behavior: relations between surface and subsurface responses. International Journal of Solids and Structures. 43 (2006) 2014-2036
43. Pelletier H., Krier J., and Mille P. Characterization of mechanical properties of thin films using nanoindentation test. Mechanics of Materials 38 (2006) 1182-1198
44. Riccardi B., and Montanari R. Indentation of metals by a flat-ended cylindrical punch. Materials Science and Engineering A 381 (2004) 1-11
45. Sadananda K., and Vasudevan A.K. Fatigue crack growth mechanisms in steels. International Journal of Fatigue 25 (2003) 899-914
46. Saraswati T., Sritharan T., Mhaisalkar S., Breach C.D., and Wulff F. Cyclic loading as an extended nanoindentation technique. Materials Science and Engineering A 423 (2006) 14-18
47. Sastry D.H. Impression creep technique-an overview. Materials Science and Engineering A 409 (2005) 67-75
48. Schindler H.-J. On quasi-non-destructive strength and toughness testing of elastic-plastic materials. International Journal of Solids and Structures 42 (2005) 717-725
49. Suresh S. Fatigue of Materials (1991), Cambridge University Press
50. Suresh S., and Giannakopoulos A.E. A new method for estimating residual stresses by instrumented sharp indentation. Acta Materialia 46 (1998) 5755-5767
51. Swadener J.G., and Pharr G.M. Indentation of elastically anisotropic half-spaces by cones and parabolas of revolution. Philosophical Magazine A 81 (2001) 447-466
52. Taljat B., and Pharr G.M. Development of pile-up during spherical indentation of elastic-plastic solids. International Journal of Solids and Structures 41 (2004) 3891-3904
53. Tunvisut K., Busso E.P., O_Dowd N.P., and Brantner H.P. Determination of the mechanical properties of metallic thin films and substrates from indentation tests. Philosophical Magazine A 82 (2002) 2013-2023
54. Tvergaard V. Effect of underloads or overloads in fatigue crack growth by crack-tip blunting. Engineering Fracture Mechanics 73 (2006) 869-879
55. Vaidyanathan R., Dao M., Ravichandran G., and Suresh S. Study of mechanical deformation in bulk metallic glass though instrumented indentation. Acta Materialia 49 (2001) 3781-3789
56. Vincent L., Calloch S., and Marquis D. A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratcheting. International Journal of Plasticity 20 (2004) 1817-1850
57. Weiß E., Postberg B., Nicak T., and Rudolph J. Simulation of ratcheting and low cycle fatigue. International Journal of Pressure Vessels and Piping 81 (2004) 235-242
58. Xu B.X., and Yue Z.F. A Study of the ratcheting by the indentation fatigue method with a flat cylindrical indenter: Part I Experimental study. Journal Materials Research 21 (2006) 1793-1797
59. Xu B.X., and Yue Z.F. A study of the ratcheting by the indentation fatigue method with a flat cylindrical indenter: Part II Finite element simulation. Journal Materials Research 22 (2007) 186-192
60. Xu B.X., Zhao B., and Yue Z.F. Investigation of residual stress by the indentation method with the flat cylindrical indenter. Journal of Materials Engineering and Performance 15 (2006) 299-305
61. Yang F.Q., and Li J.C.M. Effect of fiction and cavity depth on the elastic indentation of a cylindrical rod. Mechanics of Materials 25 (1997) 163-172
62. Yokouchi Y., Greenfield I.G., Chou T.W., and Iturbe E.B. Elastic-plastic analysis of indentation damage: cyclic loading of copper. Journal of Materials Science 22 (1987) 3087-3094
63. Yue Z.F., Stockhert B., and Gunther E. A creep finite element analysis of indentation creep testing in two phase microstructures (particle/matrix- and thin film/substrate-systems). Computational Materials Science 21 (2001) 37-56
64. Zeng K., Soderlund E., Giannakopoulos A.E., and Rowcliffe D.J. Controlled indentation: a general approach to determine mechanical properties of brittle materials. Acta Materalia 44 (1996) 1127-1141
65. Zhang H.W., Jing X.N., Subhash G., Kecskes L.J., and Dowding R.J. Investigation of shear band evolution in amorphous alloys beneath a Vickers indentation. Acta Materialia 53 (2005) 3849-3859
66. Zhao M.H., Ogasawara N., Chiba N., and Chen X. A new approach to measure the elastic-plastic properties of bulk materials using spherical indentation. Acta Materialia 54 (2006) 23-32