The performance of PCBN in hard turning

Industrial Diamond Review

Volumn 65, Issue 4, 2005, Pages

  Halpin, Timothy ^a   Byrne, Gerry ^a   Barry, John ^b  

^a UNIVERSITY COLLEGE DUBLIN   (Ireland)

^b Market Support Centre   (Ireland)

Author keywords

[No Author keywords available]

Indexed keywords

MACHINE COMPONENTS; MECHANICAL PROPERTIES; POLYCRYSTALLINE MATERIALS; RESIDUAL STRESSES; SCANNING ELECTRON MICROSCOPY; STEEL; SURFACE ROUGHNESS; TENSILE STRESS; TURNING;

CUTTING ZONE; HARD TURNING OPERATION; HARDENED STEELS; MECHANICAL SHOCK; POLYCRYSTALLINE CUBIC BORON NITRIDE (PCBN);

CUBIC BORON NITRIDE;

EID: 29744467223     PISSN: 00198145     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (43)

1. Tönshoff H. K., Arendt C., Ben Amor R., 2000, Cutting of Hardened Steel, Annals of the CIRP 49 (2), pp. 547-565
2. Chou Y. K., 2003, Thermal Modelling for Finish Hard Turning using a New Tool, ASME International Mechanical Engineering Congress, 15th - 21st Nov, Washington, D. C., U. S. A.
3. Recht R. F., 1964, Catastrophic Thermoplastic Shear, Transactions of the ASME, 86, pp. 189-193
4. Davies M. A., Chou Y., Evans C. J., 1996, On Chip Morphology, Tool Wear and Cutting Mechanics in Finish Hard Turning, Annals of the CIRP, 45 (1), pp. 77-82
5. Ueda T., Huda M. A., Yamada K., Nakayama K., 1999, Temperature Measurement of CBN Tool in Turning of High Hardness Steel, Annals of the CIRP, 48 (1), pp. 63-66
6. Barry J., Byrne G., 2002, Chip Formation, Acoustic Emission and Surface White Layers in Hard Machining, Annals of the CIRP, 51 (1), pp. 65-70
7. Poulachon G., Moisan A. L., 2000, Hard Turning: Chip Formation Mechanisms and Metallurgical Aspects, Transactions of the ASME, Journal of Manufacturing Science and Engineering, 122, pp. 406-412
8. Poulachon G., Bandyopadhyay B. P., Jawahir I. S., Pheulpin S., Seguin E., 2004, Wear behaviour of CBN tools while turning various hardened steels, WEAR, 256, pp. 302-310
9. Chou Y. K., Evans C. J., 1999, Cubic boron nitride tool wear in interrupted hard cutting, WEAR, 229, pp. 234-245
10. Barry J., Byrne G., 2001, Cutting tool wear in the machining of hardened steels Part II: cubic boron nitride cutting tool wear, WEAR, 247, pp. 152-160
11. Barry J., Byrne G., 2002, The Mechanisms of Chip Formation in Machining Hardened Steels, Transactions of the ASME, Journal of Manufacturing Science and Engineering, 124, pp. 528-535
12. Chou Y. K., Evans C. J., Barash M. M., 2002, Experimental investigation on CBN turning of hardened AISI 52100 steel, Journal of Materials Processing Technology, 124, pp. 274-283
13. Dawson T. G., Kurfess T. R., 2002, Wear Trends of PCBN Cutting Tools in Hard Turning, Metal Cutting and High Speed Machining, Kluwer Academic/ Plenum Publishers
14. Takatsu S., Shimoda H., Otani K., 1983, Effects of CBN content on the cutting performance of polycrystalline CBN tools, International Journal of Refractory Metals and Hard Materials, 12, pp. 175-178
15. Narutaki N., Yamane Y., 1979, Tool Wear and Cutting Temperature of CBN tools in Machining of Hardened Steels, Annals of the CIRP, 28 (1), pp. 23-28
16. Chou Y. K., 2003, Hard turning of M50 steel with different microstructures in continuous and intermittent cutting, WEAR, 255, pp. 1388-1394
17. Sood R., Guo C., Malkin S., 2000, Turning of Hardened Steels, Journal of Manufacturing Processes, 2 (3), pp. 187-193
18. Byrne G., Dornfeld D., Denkena B., 2003, Advancing Cutting Technology, Keynote Papers STC "C", Annals of the CIRP, 52 (2), pp. 483-508
19. Broskea T. J., 2000, PCBN Tool Failure Mode Analysis, Intertech Conference, 17th-21st July, Vancouver B.C., Canada
20. Dawson T. G., Kurfess T. R., 2001, Tool Life, Wear Rates and Surface Quality in Hard Turning, In: 29th North American Manufacturing Research Conference, 22nd-25th May, University of Florida, Gainsville, Florida, USA, pp. 1-8
21. Kishawy H. A., Elbestawi M. A., 2001, Tool wear and surface integrity during high-speed turning of hardened steel with polycrystalline cubic boron nitride tools, Proceedings of the Institution of Mechanical Engineers Part B: Engineering Manufacture, 215, pp. 755-767
22. Guo Y. B., Sahni J., 2004, A comparative study of hard turned and cylindrically ground white layers, International Journal of Machine Tools and Manufacture, 44, pp. 135-145
23. König W., Berktold A., Koch K.-F., 1993, Turning versus Grinding - A Comparison of Surface Integrity Aspects and Attainable Accuracies, Annals of the CIRP, 42 (1), pp. 39-43
24. Matsumoto Y., Hashimoto F, Lahoti G., 1999, Surface Integrity Generated by Precision Hard Turning, Annals of the CIRP, 48 (1), pp.59-62
25. Childs T.H.C., Maekawa K., Obikawa T., Yamane Y., 2000, Metal Machining - Theory and Applications, Elsevier
26. Barbacki A., Kawalec M., Hamrol A., 2003, Turning and grinding as a source of microstructural changes in the surface layer of hardened steel, Journal of Materials Processing Technology, 133, pp. 21-25
27. Dahlman P., Gunnberg F., Jacobson M., 2004, The influence of rake angle, cutting speed and cutting depth on residual stresses in hard turning, Journal of Materials Processing Technology, 147 (2), pp. 181-184
28. Thiele J. D., Melkote N., 1999, Effect of Tool Edge Geometry on Workpiece Subsurface Deformation and Through-Thickness Residual Stresses for Hard Turning of AISI 52100 Steel, Journal of Manufacturing Processes, 2 (4), pp. 270-276
29. Thiele J. D., Melkote S. H., Peascoe R. A., Watkins T. R., 2000, Effect of Cutting-Edge Geometry and Workpiece Hardness on Surface Residual Stresses in Finish Hard Turning of AISI 52100 Steel, Transactions of the ASME, Journal of Manufacturing Science and Engineering, 122 (November), pp. 642-649
30. Potdar Y. K., Zehnder A. T., 2003, Measurements and Simulations of Temperature and Deformation Fields in Transient Metal Cutting, Transactions of the ASME, Journal of Manufacturing Science and Engineering, 125, pp. 645-655
31. Broskea T. J., 2000, PCBN Tool Failure Mode Analysis, Intertech Conference, 17th-21st July 2000 Vancouver B.C., Canada
32. Chakraverti G., Pandey P.C., Mehta N. K., 1984, Analysis of tool temperature fluctuation in interrupted cutting, Precision Engineering, 6 (2), pp. 99-105
33. Hoshi T., Okushima K., 1965, Optimum diameter and positions of a fly cutter for milling steel at light cuts, Transactions of the ASME, Journal of Engineering for Industry, Nov, pp. 442-446
34. Pekelharing A. J., 1984, The Exit Failure of Cemented Carbide Face Milling Cutters Part 1 - Fundamentals and Phenomena, Annals of the CIRP, 33 (1), pp. 47-50
35. Olvera O., Barrow G., 1998, Influence of exit angle and tool nose geometry on burr formation in face milling operations, Proceedings of the Institution of Mechanical Engineers, 212 Part B, pp. 59-72
36. Komanduri R., Chandrasekaran N., Raff L. M., 2001, MD simulation of exit failure in nanometric cutting, Materials Science and Engineering, A311, pp. 1-12
37. Dokainish M. A., Elbestawi M. A., Polat U., Tole B., 1989, Analysis of Stresses during Exit in Interrupted Cutting with Chamfered Tools, International Journal of Machine Tools & Manufacture, 29 (4), pp. 519-534
38. Shaw M. C., 1979, Fracture of Metal Cutting Tools, Annals of the CIRP, 28 (1), pp. 19-21
39. Shintani K., Ueki M., Fujimura Y., 1989, Optimum cutting tool geometry when interrupted cutting carburised steel by CBN tool, International Journal of Machine Tools and Manufacture, 29 (3), pp. 415-123
40. Hashimura M., Ueda K., Dornfeld D., 1995, Analysis of Three-Dimensional Burr Formation in Oblique Cutting, Annals of the CIRP, 44 (1), pp. 27-30
41. Dornfeld D., 2002, Analysis of Burr Formation, Workshop on High Performance Cutting, 23rd January, Paris
42. Childs T.H.C., Maekawa K., Obikawa T., Yamane Y., 2000, Metal Machining - Theory and Applications, Elsevier
43. Diniz A. E., Gomes D. M., Braghini A.(Jr), 2004, Turning of hardened steel with interrupted and semi-interrupted cutting, Journal of Materials Processing Technology, 129 (2), pp. 240-248