Thermal modeling for finish hard turning using a new tool

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 14, Issue , 2003, Pages 183-192

  Chou, Y Kevin ^a   Song, Hui ^a  

^a University of Alabama   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GRINDING (MACHINING); LAYERED MANUFACTURING; MATHEMATICAL MODELS; METAL CUTTING; OPTIMIZATION; THERMAL EFFECTS; TURNING;

HEAT SOURCES; THERMAL MANAGEMENT; THERMAL MODELING;

MECHANICAL ENGINEERING;

EID: 1842434291     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2003-41765     Document Type: Conference Paper

References (36)

1. Komanduri, R., and Z. B. Hou, "Thermal Modeling of the Metal Cutting Process - Part I: Temperature Rise Distribution Due to Shear Plane Heat Source," International Journal of Mechanical Sciences, 42, pp. 1715-1752, 2000.
2. Komanduri, R., and Z. B. Hou, "Thermal Modeling of the Metal Cutting Process - Part II: Temperature Rise Distribution Due to Frictional Heat Source at the tool-chip interface," International Journal of Mechanical Sciences, 43, pp. 57-88, 2001.
3. Davies, M. A., Chou, Y. K. and Evans, C. J., On Chip Morphology, Tool Wear and Cutting Mechanics in Finish Hard Turning, Annals of the CIRP, (45), pp. 77-82, 1996.
4. Fallböhmer, P., Rodríguez, C. A., Özel, T., and Altan, T., High-Speed Machining of Cast Iron and Alloy Steels for Die and Mold Manufacturing, Journal of Materials Processing Technology, 98 (1), pp. 104-115, 2000.
5. Akcan, S., Shah, S., Moylan, S. P., Chhafra, P.N., Chandrasekar, S. and Farris, T. N., Characteristics of White Layers Formed in Steel by Machining, Manufacturing Science and Engineering, (10), pp.789-795, 1999.
6. Agha, S. R. and Liu, C. R., Experimental Study on the Performance of Superfinish Hard Turned Surfaces in Rolling Contact, Wear, (244), pp. 52-59, 2000.
7. König, W., Berktold, A. and Koch, K. F., Turning vs. Grinding - A Comparison of Surface Integrity Aspects and Attainable Accuracies, Annals of CIRP, 42(1), pp. 39-43, 1993.
8. Jochmann, S. and Wirtz, H., Achieving Precision Grinding by Hard Turning, Manufacturing Science and Engineering, (10), pp.817-823, 1999.
9. Uesaka, S. and Sumiya, H., Mechanical Properties and Cutting Performances of High Purity Polycrystalline CBN Compact, Manufacturing Science and Engineering, (10), pp.759-766, 1999.
10. Thiele, J. D. and Melkote, S. N., Effect of Cutting Edge Geometry and Workpiece Hardness on Surface Generation in the Finish Hard Turning of AISI 52100 Steel, Journal of Materials Processing Technology, 94(2), pp. 216-226, 1999.
11. Dawson, T. G. and Kurfess, T. R., Tool Life, Wear Rate, and Surface Quality in Hard Turning, Transactions of NAMRI/SME, pp. 175-182, 2001.
12. Poulachon, G., A. Moisan and I.S. Jawahir, "Tool-wear Mechanisms in Hard Turning with Polycrystalline Cubic Boron Nitride Tools", Wear, Vol. 250, pp. 576-586, 2001.
13. Chou, Y. K., Barash, M. M. and Evans, C. J., Experimental Investigation on CBN Turning of Hardened AISI 52100 Steel, Journal of Materials Processing Technology, 124 (3), pp. 274-283, 2002.
14. Davies, M. A., "Dynamic Problems in Hard Turning, Milling and Grinding," Dynamics and Chaos in Manufacturing Processes, ed. F. C. Moon, John Wiley & Sons, 1998.
15. Yasui, S. and Sakai, K., Design Criteria for Hard-Turning Machines, Manufacturing Science and Engineering, (10), pp.767-772, 1999.
16. Chou, Y. K. and Evans, C. J., Tool Wear Mechanism in Continuous Cutting of Hardened Tool Steels, Wear, (212), pp. 59-65, 1997.
17. Chou, Y. K. and Evans, C. J., White Layers and Thermal Modeling of Hard Turned Surfaces, International Journal of Machine Tools and Manufacture, (39), pp. 1863-1881, 1999.
18. Ei-Wardany, T. I. and Elbestawi, M. A., Phenomenological Analysis of Material Side Flow in Hard Turning: Causes, Modeling, and Elimination, Machining Science and Technology, (2), pp. 249-251, 1998.
19. Poulachon, G., and A. L. Moisan, "Hard Turning: Chip Formation Mechanism and Metallurgical Aspects," Journal of Manufacturing Science and Engineering, 122, pp.406-412, 2000.
20. Trigger, K. J., and B. T. Chao, "An Analytical Evaluation of Metal-Cutting Temperatures," Transactions of ASME, 73, pp.57-68, 1951.
21. Venuvinod, P. K., and W. S. Lau, "Estimation of Rake Temperatures in Free Oblique Cutting," International Journal of MTDR, 26, pp.1-14, 1986.
22. Radulescu, R., and S. G. Kapoor, "An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting," Transactions of the ASME, Journal of Engineering for Industry, 116, pp. 135-143, 1994.
23. Hahn, R. S., "On the Temperature Developed at the Shear Plane in the Metal Cutting Process," Proceedings of First U.S. National Congress of Applied Mechanics, pp. 661-666, 1951.
24. Jaeger, J. C., "Moving Sources of Heat and the Temperature at Sliding Contacts," Journal and Proceedings Royal Society of New South Wales, 76, pp. 133-228, 1942.
25. Tay, A. O., M. G. Stevenson, and G. D. Davis, "Using Finite Element Method to Determine the Temperature Distribution in Orthogonal Machining," Proceedings, Institute of Mechanical Engineers, 188, pp. 627, 1974.
26. Usui, E., Shirakashi, T. and Kitagawa, T., "Analytical Prediction of Three-Dimensional Cutting Process Part 3: Cutting Temperature and Crater Wear of Carbide Tool," ASME Journal of Engineering for Industry, 100, pp.236-243, 1978.
27. Strenkowski, J. S., and K.-J. Moon, "Finite Element Prediction of Chip geometry and Tool/Workpiece Temperature Distributions in Orthogonal Metal Cutting," Transactions of the ASME, Journal of Manufacturing Science and Engineering, 112, pp. 313-318, 1990.
28. Guo, Y. B. and C. R. Liu, "3D FEA Modeling of Hard Turning," ASME Journal of Manufacturing Science and Engineering, Vol. 124, pp.189-199, 2002.
29. Stephenson, D. A., "Assessment of Steady-State Metal Cutting Temperature Models Based on Simultaneous Infrared and Thermocouple Data," Transactions of the ASME, Journal of Engineering of Industry, 113, pp. 121-128, 1991.
30. Stephenson, D. A., "Tool-Work Thermocouple Temperature Measurements- Theory and Implementation Issues," Transactions of the ASME, Journal of Engineering of Industry, 115, pp. 432-437, 1993.
31. Kato, S., and H. Fuji, "Temperature Measurement of Workpiece in Conventional Surface Grinding," Journal of Manufacturing Science and Engineering, 122, pp. 297-303, 2000.
32. Komanduri, R. and Hou, Z. B., Thermal Modeling of the Metal Cutting Process - Part III, International Journal of Mechanical Sciences, (43), pp. 89-107, 2001.
33. Huang, Y., and Liang, S.Y., "Modeling of Cutting Forces under Hard Turning Condition Considering Tool Wear Effect," submitted to publication, 2002.
34. Asai, S. and A. Kobayashi, "Observation of Chip Producing Behavior in Ultra-Precision Diamond Machining and Study on Mirror-Like Surface Generating Mechanism," Precision Engineering, 12 (3), pp. 137-143, 1990.
35. Smithey, D. W., S. G. Kapoor and R. E. DeVor, 2001, "A New Mechanistic Model for Predicting Worn Tool Cutting Forces," Journal of Machining Science and Technology, Vol. 5, p 23-42.
36. Touloukian, Y. S., and Ho, C. Y., "Thermal conductivity: metallic elements and alloys," New York : IFI/Plenum, pp. 1212-1215, 1970.